MIB Viewer

OPTIX-SDH-PER-MIB

167 objects
This module MIB describes the Optix Perfomance.
Imported Objects
OPTIX-OID-MIBoptixCommonSdh
OPTIX-SDH-TC-MIBSdhPerformanceEventType
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIGauge32 mgmt MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCDateAndTime
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.3.10.20IdentityoptixPerformanceThis module MIB describes the Optix Perfomance.
1.3.6.1.2.1.10.3.10.20.10NodeperMonitorTime
1.3.6.1.2.1.10.3.10.20.10.10Nodeper15mMonitorTime
1.3.6.1.2.1.10.3.10.20.10.10.10Scalarper15mMonitorStartTimeread-writecurrentStart date and time of 15 minutes PM period.When system enter the per15mMonitorStartTime,15 minutes PM starts.the per15mMonitorStartTime should not ealier than…
1.3.6.1.2.1.10.3.10.20.10.10.20Scalarper15mMonitorEndTimeread-writecurrentEnd date and time of 15 minutes PM period.you need set the per15mMonitorStartTime before set the per15mMonitorEndTime,and per15mMonitorStartTime should earlier…
1.3.6.1.2.1.10.3.10.20.10.20Nodeper24hMonitorTime
1.3.6.1.2.1.10.3.10.20.10.20.10Scalarper24hMonitorStartTimeread-writecurrentStart date and time of one day PM period.When system enter the per24hMonitorStartTime,one day PM starts.the per24hMonitorStartTime should not ealier than curre…
1.3.6.1.2.1.10.3.10.20.10.20.20Scalarper24hMonitorEndTimeread-writecurrentEnd date and time of one day PM period.you need set the per24hMonitorStartTime before set the per24hMonitorEndTime,and per24hMonitorStartTime should earlier th…
1.3.6.1.2.1.10.3.10.20.20NodeperMonitorData
1.3.6.1.2.1.10.3.10.20.20.10Nodeper15mMonitoring
1.3.6.1.2.1.10.3.10.20.20.10.10Tableper15mCurrentDataTablenot-accessiblecurrent15 minutes PM period current data table
1.3.6.1.2.1.10.3.10.20.20.10.10.1Rowper15mCurrentDataEntrynot-accessiblecurrent15 minutes PM period current data entry
1.3.6.1.2.1.10.3.10.20.20.10.10.1.1Columnper15mCurrentDataBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.20.10.10.1.2Columnper15mCurrentDataOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.10.10.1.3Columnper15mCurrentDataPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.10.10.1.4Columnper15mCurrentDataEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.10.10.1.5Columnper15mCurrentDataStartTimeread-onlycurrentstart date and time: start date and time of current 15 minutes PM period.
1.3.6.1.2.1.10.3.10.20.20.10.10.1.6Columnper15mCurrentDataValueread-onlycurrentCurrent data value: value of current 15 minutes PM period register.the units of value vary as the PM event,fo example,the unit of RSUAS is 'second',while the u…
1.3.6.1.2.1.10.3.10.20.20.10.10.1.7Columnper15mCurrentDataResetread-writecurrentCurrent data reset: reset value of current 15 minutes PM period register to zero.
1.3.6.1.2.1.10.3.10.20.20.10.20Tableper15mHistoryDataTablenot-accessiblecurrent15 minutes PM period historic data table
1.3.6.1.2.1.10.3.10.20.20.10.20.1Rowper15mHistoryDataEntrynot-accessiblecurrent15 minutes PM period historic data entry
1.3.6.1.2.1.10.3.10.20.20.10.20.1.1Columnper15mHistoryDataBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.20.10.20.1.2Columnper15mHistoryDataOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.10.20.1.3Columnper15mHistoryDataPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.10.20.1.4Columnper15mHistoryDataEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.10.20.1.5Columnper15mHistoryDataStartTimeread-onlycurrentstart date and time: start date and time of special 15 minutes PM period.
1.3.6.1.2.1.10.3.10.20.20.10.20.1.6Columnper15mHistoryDataValueread-onlycurrentHistoric data value: value of special 15 minutes PM period register.the units of value vary as the PM event,fo example,the unit of RSUAS is 'second',while the …
1.3.6.1.2.1.10.3.10.20.20.10.20.1.7Columnper15mHistoryDataResetread-writecurrentHistoric data reset: reset value of special 15 minutes PM period register to zero.
1.3.6.1.2.1.10.3.10.20.20.20Nodeper24hMonitoring
1.3.6.1.2.1.10.3.10.20.20.20.10Tableper24hCurrentDataTablenot-accessiblecurrentone day PM period current data table
1.3.6.1.2.1.10.3.10.20.20.20.10.1Rowper24hCurrentDataEntrynot-accessiblecurrentone day PM period current data entry
1.3.6.1.2.1.10.3.10.20.20.20.10.1.1Columnper24hCurrentDataBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.20.20.10.1.2Columnper24hCurrentDataOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.20.10.1.3Columnper24hCurrentDataPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.20.10.1.4Columnper24hCurrentDataEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.20.10.1.5Columnper24hCurrentDataStartTimeread-onlycurrentstart date and time: start date and time of current one day PM period.
1.3.6.1.2.1.10.3.10.20.20.20.10.1.6Columnper24hCurrentDataValueread-onlycurrentCurrent data value: value of current one day PM period register.the units of value vary as the PM event,fo example,the unit of RSUAS is 'second',while the unit…
1.3.6.1.2.1.10.3.10.20.20.20.10.1.7Columnper24hCurrentDataResetread-writecurrentCurrent data reset: reset value of current one day PM period register to zero.
1.3.6.1.2.1.10.3.10.20.20.20.20Tableper24hHistoryDataTablenot-accessiblecurrentone day PM period historic data table
1.3.6.1.2.1.10.3.10.20.20.20.20.1Rowper24hHistoryDataEntrynot-accessiblecurrentone day PM period historic data entry
1.3.6.1.2.1.10.3.10.20.20.20.20.1.1Columnper24hHistoryDataBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.20.20.20.1.2Columnper24hHistoryDataOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.20.20.1.3Columnper24hHistoryDataPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.20.20.1.4Columnper24hHistoryDataEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.20.20.20.1.5Columnper24hHistoryDataStartTimeread-onlycurrentstart date and time: start date and time of special one day PM period.
1.3.6.1.2.1.10.3.10.20.20.20.20.1.6Columnper24hHistoryDataValueread-onlycurrentHistoric data value: value of special one day PM period register.the units of value vary as the PM event,fo example,the unit of RSUAS is 'second',while the uni…
1.3.6.1.2.1.10.3.10.20.20.20.20.1.7Columnper24hHistoryDataResetread-writecurrentHistoric data reset: reset value of special one day PM period register to zero.
1.3.6.1.2.1.10.3.10.20.30NodeperThreshold
1.3.6.1.2.1.10.3.10.20.30.10Nodeper15mThreshold
1.3.6.1.2.1.10.3.10.20.30.10.10Tableper15mThresholdTablenot-accessiblecurrent15 minutes PM period threshold table
1.3.6.1.2.1.10.3.10.20.30.10.10.1Rowper15mThresholdEntrynot-accessiblecurrent15 minutes PM period threshold entry
1.3.6.1.2.1.10.3.10.20.30.10.10.1.1Columnper15mThresholdBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.30.10.10.1.2Columnper15mThresholdOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.30.10.10.1.3Columnper15mThresholdPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.30.10.10.1.4Columnper15mThresholdEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.30.10.10.1.5Columnper15mThresholdHighValueread-writecurrentHigh threshold value: some parameters have two thresholds,such as RSBBE, while others have single threshold,such as RSSES.
1.3.6.1.2.1.10.3.10.20.30.10.10.1.6Columnper15mThresholdLowValueread-writecurrentLow threshold value: specially,some parameters have single threshold, so their Low threshold should always be zero.
1.3.6.1.2.1.10.3.10.20.30.10.10.1.7Columnper15mThresholdResetread-writecurrentThreshold reset: reset both high threshold and low threshold(if has).
1.3.6.1.2.1.10.3.10.20.30.20Nodeper24hThreshold
1.3.6.1.2.1.10.3.10.20.30.20.10Tableper24hThresholdTablenot-accessiblecurrentone day PM period threshold table
1.3.6.1.2.1.10.3.10.20.30.20.10.1Rowper24hThresholdEntrynot-accessiblecurrentone day PM period threshold entry
1.3.6.1.2.1.10.3.10.20.30.20.10.1.1Columnper24hThresholdBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.30.20.10.1.2Columnper24hThresholdOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.30.20.10.1.3Columnper24hThresholdPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.30.20.10.1.4Columnper24hThresholdEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.30.20.10.1.5Columnper24hThresholdValueread-writecurrentThreshold value: all parameters have only one threshold value for one day PM period.
1.3.6.1.2.1.10.3.10.20.30.20.10.1.6Columnper24hThresholdResetread-writecurrentThreshold reset: reset threshold.
1.3.6.1.2.1.10.3.10.20.40NodeperStatus
1.3.6.1.2.1.10.3.10.20.40.10NodeperStatusControl
1.3.6.1.2.1.10.3.10.20.40.10.10Nodeper15mStatusControl
1.3.6.1.2.1.10.3.10.20.40.10.10.10Tableper15mMonitorStatusTablenot-accessiblecurrent15 minutes PM period monitor status table.
1.3.6.1.2.1.10.3.10.20.40.10.10.10.1Rowper15mMonitorStatusEntrynot-accessiblecurrent15 minutes PM period monitor status entry.
1.3.6.1.2.1.10.3.10.20.40.10.10.10.1.1Columnper15mMonitorStatusBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.40.10.10.10.1.2Columnper15mMonitorStatusOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.10.1.3Columnper15mMonitorStatusPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.10.1.4Columnper15mMonitorStatusEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.10.1.5Columnper15mMonitorStatusread-writecurrentMonitor status: when monitor status is disabled,current data register is reset to zero and will not increase any more until monitor status be enabled. The defa…
1.3.6.1.2.1.10.3.10.20.40.10.10.20Tableper15mPauseStatusTablenot-accessiblecurrent15 minutes PM period pause status table.
1.3.6.1.2.1.10.3.10.20.40.10.10.20.1Rowper15mPauseStatusEntrynot-accessiblecurrent15 minutes PM period pause status entry.
1.3.6.1.2.1.10.3.10.20.40.10.10.20.1.1Columnper15mPauseStatusBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.40.10.10.20.1.2Columnper15mPauseStatusOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.20.1.3Columnper15mPauseStatusPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.20.1.4Columnper15mPauseStatusEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.20.1.5Columnper15mPauseStatusread-writecurrentPause status: when pause status is disabled,current data register will not increase (but will reset to zero)any more until pause status be enabled.The default …
1.3.6.1.2.1.10.3.10.20.40.10.10.30Tableper15mThresholdStatusTablenot-accessiblecurrent15 minutes PM period threshold status table
1.3.6.1.2.1.10.3.10.20.40.10.10.30.1Rowper15mThresholdStatusEntrynot-accessiblecurrent15 minutes PM period threshold status entry
1.3.6.1.2.1.10.3.10.20.40.10.10.30.1.1Columnper15mThresholdStatusBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.40.10.10.30.1.2Columnper15mThresholdStatusOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.30.1.3Columnper15mThresholdStatusPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.30.1.4Columnper15mThresholdStatusEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.30.1.5Columnper15mThresholdStatusread-writecurrentThreshold status:when threshold status is disabled,no threshold crossing alert will be reported even though threshold is crossed.The default threshold status i…
1.3.6.1.2.1.10.3.10.20.40.10.10.40Tableper15mAutoReportStatusTablenot-accessiblecurrent15 minutes PM period automatic report(REP) status table
1.3.6.1.2.1.10.3.10.20.40.10.10.40.1Rowper15mAutoReportStatusEntrynot-accessiblecurrent15 minutes PM period automatic report(REP) status entry
1.3.6.1.2.1.10.3.10.20.40.10.10.40.1.1Columnper15mAutoReportStatusBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.40.10.10.40.1.2Columnper15mAutoReportStatusOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.40.1.3Columnper15mAutoReportStatusPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.40.1.4Columnper15mAutoReportStatusEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.10.40.1.5Columnper15mAutoReportStatusread-writecurrentAutomatic report status: if automatic report status is enabled, when PM period expired, NE will report none-zero current data register value to user.The defaul…
1.3.6.1.2.1.10.3.10.20.40.10.20Nodeper24hStatusControl
1.3.6.1.2.1.10.3.10.20.40.10.20.10Tableper24hMonitorStatusTablenot-accessiblecurrentone day PM period monitor status table.
1.3.6.1.2.1.10.3.10.20.40.10.20.10.1Rowper24hMonitorStatusEntrynot-accessiblecurrentone day PM period monitor status entry.
1.3.6.1.2.1.10.3.10.20.40.10.20.10.1.1Columnper24hMonitorStatusBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.40.10.20.10.1.2Columnper24hMonitorStatusOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.10.1.3Columnper24hMonitorStatusPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.10.1.4Columnper24hMonitorStatusEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.10.1.5Columnper24hMonitorStatusread-writecurrentMonitor status: when monitor status is disabled,current data register is reset to zero and will not increase any more until monitor status be enabled.The defau…
1.3.6.1.2.1.10.3.10.20.40.10.20.20Tableper24hPauseStatusTablenot-accessiblecurrentone day PM period pause status table.
1.3.6.1.2.1.10.3.10.20.40.10.20.20.1Rowper24hPauseStatusEntrynot-accessiblecurrentone day PM period pause status entry.
1.3.6.1.2.1.10.3.10.20.40.10.20.20.1.1Columnper24hPauseStatusBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.40.10.20.20.1.2Columnper24hPauseStatusOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.20.1.3Columnper24hPauseStatusPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.20.1.4Columnper24hPauseStatusEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.20.1.5Columnper24hPauseStatusread-writecurrentPause status: when pause status is disabled,current data register will not increase (but will reset to zero)any more until pause status be enabled.The default …
1.3.6.1.2.1.10.3.10.20.40.10.20.30Tableper24hThresholdStatusTablenot-accessiblecurrentone day PM period threshold status table.
1.3.6.1.2.1.10.3.10.20.40.10.20.30.1Rowper24hThresholdStatusEntrynot-accessiblecurrentone day PM period threshold status entry.
1.3.6.1.2.1.10.3.10.20.40.10.20.30.1.1Columnper24hThresholdStatusBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.40.10.20.30.1.2Columnper24hThresholdStatusOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.30.1.3Columnper24hThresholdStatusPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.30.1.4Columnper24hThresholdStatusEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.30.1.5Columnper24hThresholdStatusread-writecurrentThreshold status:when threshold status is disabled,no threshold crossing alert will be reported even though threshold is crossed.The default threshold status i…
1.3.6.1.2.1.10.3.10.20.40.10.20.40Tableper24hAutoReportStatusTablenot-accessiblecurrentone day PM period automatic report(REP) status table.
1.3.6.1.2.1.10.3.10.20.40.10.20.40.1Rowper24hAutoReportStatusEntrynot-accessiblecurrentone day PM period automatic report(REP) status entry.
1.3.6.1.2.1.10.3.10.20.40.10.20.40.1.1Columnper24hAutoReportStatusBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.40.10.20.40.1.2Columnper24hAutoReportStatusOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.40.1.3Columnper24hAutoReportStatusPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.40.1.4Columnper24hAutoReportStatusEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.10.20.40.1.5Columnper24hAutoReportStatusread-writecurrentAutomatic report status: if automatic report status is enabled, when PM period expired, NE will report none-zero current data register value to user.The defaul…
1.3.6.1.2.1.10.3.10.20.40.20NodeperThresholdCrossStatus
1.3.6.1.2.1.10.3.10.20.40.20.10Tableper15mThresholdCrossStatusTablenot-accessiblecurrent15 minutes PM period threshold crossing status table.
1.3.6.1.2.1.10.3.10.20.40.20.10.1Rowper15mThresholdCrossStatusEntrynot-accessiblecurrent15 minutes PM period threshold crossing status entry.
1.3.6.1.2.1.10.3.10.20.40.20.10.1.1Columnper15mThresholdCrossStatusBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.40.20.10.1.2Columnper15mThresholdCrossStatusOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.20.10.1.3Columnper15mThresholdCrossStatusPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.20.10.1.4Columnper15mThresholdCrossStatusEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.20.10.1.5Columnper15mThresholdCrossStatusread-onlycurrentThreshold crossing status:normal-threshold was not crossed,crossed -threshold was crossed.
1.3.6.1.2.1.10.3.10.20.40.20.20Tableper24hThresholdCrossStatusTablenot-accessiblecurrentone day PM period threshold crossing status table.
1.3.6.1.2.1.10.3.10.20.40.20.20.1Rowper24hThresholdCrossStatusEntrynot-accessiblecurrentone day PM period threshold crossing status entry.
1.3.6.1.2.1.10.3.10.20.40.20.20.1.1Columnper24hThresholdCrossStatusBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.40.20.20.1.2Columnper24hThresholdCrossStatusOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.20.20.1.3Columnper24hThresholdCrossStatusPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.20.20.1.4Columnper24hThresholdCrossStatusEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.40.20.20.1.5Columnper24hThresholdCrossStatusread-onlycurrentThreshold crossing status:normal-threshold was not crossed,crossed -threshold was crossed.
1.3.6.1.2.1.10.3.10.20.50NodeperEvents
1.3.6.1.2.1.10.3.10.20.50.10NodeperUATEvent
1.3.6.1.2.1.10.3.10.20.50.10.10TableperUATEventTablenot-accessiblecurrentUAT event table.
1.3.6.1.2.1.10.3.10.20.50.10.10.1RowperUATEventEntrynot-accessiblecurrentUAT event entry.
1.3.6.1.2.1.10.3.10.20.50.10.10.1.1ColumnperUATBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.50.10.10.1.2ColumnperUATOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.50.10.10.1.3ColumnperUATPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.50.10.10.1.4ColumnperUATEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.50.10.10.1.5ColumnperUATStartTimeread-onlycurrentthe date and time when enter UAT.
1.3.6.1.2.1.10.3.10.20.50.10.10.1.6ColumnperUATEndTimeread-onlycurrentthe date and time when exit UAT.
1.3.6.1.2.1.10.3.10.20.50.20NodeperCSESEvent
1.3.6.1.2.1.10.3.10.20.50.20.10TableperCSESEventTablenot-accessiblecurrentCSES event table.
1.3.6.1.2.1.10.3.10.20.50.20.10.1RowperCSESEventEntrynot-accessiblecurrentCSES event entry.
1.3.6.1.2.1.10.3.10.20.50.20.10.1.1ColumnperCSESBoardNoread-onlycurrentCard No.:between 1 and 20
1.3.6.1.2.1.10.3.10.20.50.20.10.1.2ColumnperCSESOpticalPortread-onlycurrentOptical port No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.50.20.10.1.3ColumnperCSESPathNumberread-onlycurrentPath No.:values depend on type of card
1.3.6.1.2.1.10.3.10.20.50.20.10.1.4ColumnperCSESEventIDread-onlycurrentEvent ID:values depend on type of card
1.3.6.1.2.1.10.3.10.20.50.20.10.1.5ColumnperCSESStartTimeread-onlycurrentthe date and time when enter CSES.
1.3.6.1.2.1.10.3.10.20.50.20.10.1.6ColumnperCSESKeepTimeread-onlycurrentthe count of CSES continues.
1.3.6.1.2.1.10.3.10.20.90NodeoptixCommonSdhConformance
1.3.6.1.2.1.10.3.10.20.90.1NodeoptixCommonSdhGroups
1.3.6.1.2.1.10.3.10.20.90.1.1GroupcurrentObjectGroupcurrentEnter the description of the created OBJECT-GROUP.
1.3.6.1.2.1.10.3.10.20.90.2NodeoptixCommonSdhCompliances
1.3.6.1.2.1.10.3.10.20.90.2.1ComplianceoptixCommonSdhbasicCompliancecurrentEnter the description of the created MODULE-COMPLIANCE.
Type Definitions
NameSyntaxStatusDescription
RowStatusINTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) }