MIB Viewer

OPTIX-SONET-PATH-MIB-V2

32 objects
Enter the description for this MIB module.
Imported Objects
OPTIX-OID-MIBoptixProvisionSonet
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIGauge32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCTEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.4.20.5IdentityoptixsonetPathAttribEnter the description for this MIB module.
1.3.6.1.2.1.10.4.20.5.1TableoptixsonetStsPathTablenot-accessiblecurrentThis table describes the STS path management interface of Huawei SONET transmit platform
1.3.6.1.2.1.10.4.20.5.1.1RowoptixsonetStsPathEntrynot-accessiblecurrentThe STS path management entry
1.3.6.1.2.1.10.4.20.5.1.1.1ColumnstsPathLevelread-onlycurrentThe path level that identifies the type of STS path.
1.3.6.1.2.1.10.4.20.5.1.1.2ColumnstsPathBidread-onlycurrentSlot number. This will indicate what is the slot of the object.
1.3.6.1.2.1.10.4.20.5.1.1.3ColumnstsPathPidread-onlycurrentPort Number. This will indicate what is the Port of the object.
1.3.6.1.2.1.10.4.20.5.1.1.4ColumnstsPathStsIdread-onlycurrentSts Number. This will indicate what is the Sts of the object.
1.3.6.1.2.1.10.4.20.5.1.1.5ColumnstsPathRevertiveModeread-writecurrentA revertive mode. It only applies to UPSR.Valid values are shown below. Value Description Y Revertive mode. N No-revertive mode.
1.3.6.1.2.1.10.4.20.5.1.1.6ColumnstsPathRevertiveTimeread-writecurrentRevertive time. It only applies to UPSR.Valid values are shown below. Value Description 5 to 12 Revertive time of UPSR, ranging from 5 to 12 minutes, default i…
1.3.6.1.2.1.10.4.20.5.1.1.7ColumnstsPathSwitchConditonread-writecurrentOptional switching condition. Valid value is Y (switch when existing PDI-P) or N (do not switch when existing PDI-P).Default value is N.
1.3.6.1.2.1.10.4.20.5.1.1.8ColumnstsPathDelayTimeread-writecurrentDelay time is hold-off time. It is an integer. Valid value ranges from 0 to 255. Unit is 100 ms. Default value is 0.Delay times are useful for interworking of …
1.3.6.1.2.1.10.4.20.5.1.1.9ColumnstsPathSFBERread-writecurrentThreshold of path (B3) SFBER on a facility. Valid values are shown below. Value Description 1E-3 to 1E-5 SFBER ranges from 1E-3 to 1E-5, Default threshold is 1…
1.3.6.1.2.1.10.4.20.5.1.1.10ColumnstsPathSDBERread-writecurrentThreshold of path (B3) SDBER on a facility. Valid values are shown below. Value Description 1E-3 to 1E-5 SFBER ranges from 1E-3 to 1E-5, Default threshold is 1…
1.3.6.1.2.1.10.4.20.5.1.1.11ColumnstsPathJ1TRCMODEread-writecurrentPath trace mode. Valid values are shown below. Value Description MANUAL Performs the comparison of the received string with the user-entered expected string. A…
1.3.6.1.2.1.10.4.20.5.1.1.12ColumnstsPathTRCJ1read-writecurrentThe path trace message contents (J1) to be transmitted.
1.3.6.1.2.1.10.4.20.5.1.1.13ColumnstsPathEXPTRCJ1read-writecurrentThe expected path traces message (J1) contents.
1.3.6.1.2.1.10.4.20.5.1.1.14ColumnstsPathINCTRCJ1read-onlycurrentThe path trace message received. It can not include escape characters except \ and .
1.3.6.1.2.1.10.4.20.5.1.1.15ColumnstsPathTRCC2read-writecurrentThe C2 byte hex code to be transmitted. Valid values are shown below. Value Description UNEQ 0x00 The C2 content to be transmitted is unloaded. EQPD (default) …
1.3.6.1.2.1.10.4.20.5.1.1.16ColumnstsPathEXPTRCC2read-writecurrentThe expected C2 byte hex code. Valid values are shown below. Value Description UNEQ 0x00 The C2 content to be transmitted is unloaded. EQPD (default) 0x01 The …
1.3.6.1.2.1.10.4.20.5.1.1.17ColumnstsPathINCTRCC2read-onlycurrentThe C2 byte hex code received. Valid values are shown below. Value Description UNEQ 0x00 The C2 content to be transmitted is unloaded. EQPD (default) 0x01 The …
1.3.6.1.2.1.10.4.20.5.1.1.18ColumnstsPathSQLread-onlycurrentThe flag of squelch. This parameter only supplies for BLSR. Valid value is Y or N.
1.3.6.1.2.1.10.4.20.5.1.1.19ColumnstsPathSwitchStateread-onlycurrentIt is only valid when the port is in the UPSR protection group. Valid values are shown below. Value Description IDLE Idle WTR Wait to restore AUTOSW Automatic …
1.3.6.1.2.1.10.4.20.5.1.1.20ColumnstsPathPSTread-writecurrent<PST> means the primary state of the entity. Valid values are IS-NR, OOS-AU, OOS-MA and OOS-AUMA.
1.3.6.1.2.1.10.4.20.5.1.1.21ColumnstsPathSSTread-writecurrent<SST> means the secondary state of the entity. Valid values are MT, LPBK, SGEO and FAF,
1.3.6.1.2.1.10.4.20.5.1.1.22ColumnstsPathLoopbackStatusread-writecurrentThis variable represents the current state of the loopback on the sts path.
1.3.6.1.2.1.10.4.20.5.2NodeoptixsonetPathAttribConformance
1.3.6.1.2.1.10.4.20.5.2.1NodeoptixsonetPathAttribGroups
1.3.6.1.2.1.10.4.20.5.2.1.1GroupcurrentObjectGroupcurrentEnter the description of the created OBJECT-GROUP.
1.3.6.1.2.1.10.4.20.5.2.2NodeoptixsonetPathAttribCompliances
1.3.6.1.2.1.10.4.20.5.2.2.1CompliancebasicCompliancecurrentEnter the description of the created MODULE-COMPLIANCE.
Type Definitions
NameSyntaxStatusDescription
C2ValueINTEGER { eqpd(1), vt-sts1(2), lock-vt(3), ds3(4), ds4na(18), atm(19), dqdb(20), fddi(21), hdlc-over-sonet(22), laps(24), gfp(27), pdi-1(225), pdi-2(226), pdi-3(227), pdi-4(228), pdi-5(229), pdi-6(230), pdi-7(231), pdi-8(232), pdi-9(233), pdi-10(234), pdi-11(235), pdi-12(236), pdi-13(237), pdi-14(238), pdi-15(239), pdi-16(240), pdi-17(241), pdi-18(242), pdi-19(243), pdi-20(244), pdi-21(245), pdi-22(246), pdi-23(247), pdi-24(248), pdi-29(249), pdi-26(250), pdi-27(251), pdi-28(252), uneq(253), o-181(254), invalid(65534) }currentEnter the description for the C2Value TEXTUAL-CONVENTION converted from type assignment.
LpbkTypeINTEGER { terminal(1), facility(2), crs(3), ds1feac(4), ds3feac(5), fac2ni(6), noloop(255) }currentEnter the description for the LpbkType TEXTUAL-CONVENTION converted from type assignment.