OPTIX-SONET-TU-MIB-V2
46 objects
Enter the description for this MIB module.
Imported Objects
| OPTIX-OID-MIB | optixProvisionSonet |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.20.2 | IdentityoptixsonetFacilityMgt | Enter the description for this MIB module. | ||
| 1.3.6.1.2.1.10.4.20.2.1 | Tableds3PortAttribTable | not-accessible | current | The DS3 facilities configuration Table |
| 1.3.6.1.2.1.10.4.20.2.1.1 | Rowds3PortAttribEntry | not-accessible | current | The DS3 facilities configuration entry |
| 1.3.6.1.2.1.10.4.20.2.1.1.1 | Columnds3PortIndexSlotId | read-only | current | Slot number. This will indicate what is the slot of the object. |
| 1.3.6.1.2.1.10.4.20.2.1.1.2 | Columnds3PortIndexPortId | read-only | current | Port Number. This will indicate what is the Port of the object. |
| 1.3.6.1.2.1.10.4.20.2.1.1.3 | Columnds3PortAttribReq | read-write | current | High or low receive equalizer. |
| 1.3.6.1.2.1.10.4.20.2.1.1.4 | Columnds3PortAttribLbo | read-write | current | Line build out. Line build out (DS3 port) values Value Description 1 Cable length range from 0 to 225 feet. 2 Cable length range from 226 to 450 feet. |
| 1.3.6.1.2.1.10.4.20.2.1.1.5 | Columnds3PortAttribLineCde | read-only | current | DS3 line code. Valid value is B3ZS. |
| 1.3.6.1.2.1.10.4.20.2.1.1.6 | Columnds3PortAttribFmt | read-write | current | Frame format. Valid values are CBIT, M23 or UNFRAMED. For PDM3 unit, if the port type is DS3_ASYN_STS1, then <FMT> can be CBIT, M23 or UNFRAMED. If the port ty… |
| 1.3.6.1.2.1.10.4.20.2.1.1.7 | Columnds3PortAttribTACC | read-write | current | Defines the DS3 port as a test access port with a selected unique TAP number. |
| 1.3.6.1.2.1.10.4.20.2.1.1.8 | Columnds3PortAttribLof2ais | read-write | current | The parameter is provisioned to determine whether or not to generate DS3 AIS for the DS3 LOF. The Valid value of this parameter is 'no' and 'yes'. PQT3/PQT3A/P… |
| 1.3.6.1.2.1.10.4.20.2.1.1.9 | Columnds3PortAttribSvtimer | read-write | current | Signal validation timer in minutes. Valid values are shown below. Value Description From 00-03 Signal validation timer in minutes. Only valid if auto in-servic… |
| 1.3.6.1.2.1.10.4.20.2.1.1.10 | Columnds3PortAttribPST | read-write | current | The primary state of the entity. Administrative State (PST) Definition IS Puts the entity in service. OOS Puts the entity out of service. |
| 1.3.6.1.2.1.10.4.20.2.1.1.11 | Columnds3PortAttribSST | read-write | current | The secondary state of the entity. Administrative State (PST) Definition. AINS Puts the entity in automatic in-service. MT Removes the entity from service for … |
| 1.3.6.1.2.1.10.4.20.2.1.1.12 | Columnds3LoopbackStatus | read-write | current | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely … |
| 1.3.6.1.2.1.10.4.20.2.1.1.13 | Columnds3LoopbackTimeout | read-only | current | The remnant time that loop-back will be released. |
| 1.3.6.1.2.1.10.4.20.2.1.1.14 | Columnds3RemoteALWFELPBK | read-write | current | (Optional) Far-end loopback allowance attribute of the port. If it is enable, the automatic far-end loopbacks are allowed. It is either enable or disable. The … |
| 1.3.6.1.2.1.10.4.20.2.2 | Tableds1PortAttribTable | not-accessible | current | The DS1 facilities configuration Table |
| 1.3.6.1.2.1.10.4.20.2.2.1 | Rowds1PortAttribEntry | not-accessible | current | The DS1 facilities configuration entry |
| 1.3.6.1.2.1.10.4.20.2.2.1.1 | Columnds1PortIndexSlotId | read-only | current | Slot number. This will indicate what is the slot of the object. |
| 1.3.6.1.2.1.10.4.20.2.2.1.2 | Columnds1PortIndexPortId | read-only | current | Port Number. This will indicate what is the Port of the object.For the Transmux unit this is the DS3 port number.And for other Ds1 units, it's the Ds1 port Num… |
| 1.3.6.1.2.1.10.4.20.2.2.1.3 | Columnds1PortIndexPath | read-only | current | Ds1 identifier of the Transmux unit .For DS1 in a Transmux unit, it is equivalent to DS1 port number of its Transmux unit. For other Ds1 units, It will be zero. |
| 1.3.6.1.2.1.10.4.20.2.2.1.4 | Columnds1PortAttribLbo | read-write | current | Line build out. Line build out (DS1 port) values Value Description 1 Cable length range from 0 to 131 feet. 2 Cable length range from 132 to 262 feet. 3 Cable … |
| 1.3.6.1.2.1.10.4.20.2.2.1.5 | Columnds1PortAttribLineCde | read-write | current | DS1 Line coding. Valid value is AMI or B8ZS. Default is B8ZS. |
| 1.3.6.1.2.1.10.4.20.2.2.1.6 | Columnds1PortAttribFmt | read-write | current | Frame format. Valid value is SF, ESF or UNFRAMED. |
| 1.3.6.1.2.1.10.4.20.2.2.1.7 | Columnds1PortAttribTACC | read-write | current | Defines the DS1/T1 port as a test access port with a selected unique TAP number. |
| 1.3.6.1.2.1.10.4.20.2.2.1.8 | Columnds1PortAttribLof2ais | read-write | current | The parameter is provisioned to determine whether or not to generate DS1 AIS for the DS1 LOF |
| 1.3.6.1.2.1.10.4.20.2.2.1.9 | Columnds1PortAttribSvtimer | read-write | current | Signal validation timer in minutes. Valid values are shown below. Value Description From 00-03 Signal validation timer in minutes. Only valid if auto in-servic… |
| 1.3.6.1.2.1.10.4.20.2.2.1.10 | Columnds1PortAttribPST | read-write | current | The primary state of the entity. Administrative State (PST) Definition IS Puts the entity in service. OOS Puts the entity out of service. |
| 1.3.6.1.2.1.10.4.20.2.2.1.11 | Columnds1PortAttribSST | read-write | current | The secondary state of the entity. Administrative State (PST) Definition. AINS Puts the entity in automatic in-service. MT Removes the entity from service for … |
| 1.3.6.1.2.1.10.4.20.2.2.1.12 | Columnds1LoopbackStatus | read-write | current | This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely … |
| 1.3.6.1.2.1.10.4.20.2.2.1.13 | Columnds1LoopbackTimeout | read-only | current | The remnant time that loop-back will be released. |
| 1.3.6.1.2.1.10.4.20.2.2.1.14 | Columnds1RemoteALWFELPBK | read-write | current | (Optional) Far-end loopback allowance attribute of the port. If it is enable, the automatic far-end loopbacks are allowed. It is either enable or disable. The … |
| 1.3.6.1.2.1.10.4.20.2.2.1.15 | Columnds1PortLpbkAutomaticTime | read-write | current | Time-out ticks (1 minute). For the T1 port default value is 120 (2 hours). 0 means time-out function is disabling. Valid values are 0~9999. |
| 1.3.6.1.2.1.10.4.20.2.3 | TableportTypeTable | not-accessible | current | Port type management table. |
| 1.3.6.1.2.1.10.4.20.2.3.1 | RowportTypeEntry | not-accessible | current | Port type management entry. |
| 1.3.6.1.2.1.10.4.20.2.3.1.1 | ColumnportIndexSlotId | read-only | current | Slot number. This will indicate what is the slot of the object. |
| 1.3.6.1.2.1.10.4.20.2.3.1.2 | ColumnportIndexPortId | read-only | current | Port Number. This will indicate what is the Port of the object. |
| 1.3.6.1.2.1.10.4.20.2.3.1.3 | ColumnportType | read-write | current | The AID unit port type.Valid values are shown below. INTFTYPE values Value Description DS3_ASYN_STS1 DS3 signal asynchronous mapped into STS1. Default for DS3 … |
| 1.3.6.1.2.1.10.4.20.2.4 | NodeoptixsonetFacilityMgtConformance | |||
| 1.3.6.1.2.1.10.4.20.2.4.1 | NodeoptixsonetFacilityMgtGroups | |||
| 1.3.6.1.2.1.10.4.20.2.4.1.1 | GroupcurrentObjectGroup | current | Enter the description of the created OBJECT-GROUP. | |
| 1.3.6.1.2.1.10.4.20.2.4.2 | NodeoptixsonetFacilityMgtCompliances | |||
| 1.3.6.1.2.1.10.4.20.2.4.2.1 | CompliancebasicCompliance | current | Enter the description of the created MODULE-COMPLIANCE. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IntfType | INTEGER { ds1-asyn-vt1(1), ds3-asyn-sts1(10), ec(12), ds3-tmux-ds1(13), ds3-srv-ds1(17), uas(65), mix(100), invalid(254) } | current | Enter the description for the IntfType TEXTUAL-CONVENTION converted from type assignment. |
| LpbkType | INTEGER { terminal(1), facility(2), crs(3), ds1feac(4), ds3feac(5), fac2ni(6), noloop(255) } | current | Enter the description for the LpbkType TEXTUAL-CONVENTION converted from type assignment. |