OSPF-PRIVATE-MIB
166 objects
Cajun Private OSPF mibs
Imported Objects
| Cajun-ROOT | cjnProtocol |
| OSPF-MIB | AreaID Metric RouterID TOSType |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.43.2.9 | IdentitycjnOspf | Cajun Private OSPF mibs | ||
| 1.3.6.1.4.1.1751.2.43.2.9.1 | NodecjnOspfGblConfGroup | |||
| 1.3.6.1.4.1.1751.2.43.2.9.1.1 | ScalarcjnOspfRouterId | read-write | current | OSPF router-id unique within an autonomous system |
| 1.3.6.1.4.1.1751.2.43.2.9.1.2 | ScalarcjnOspfPathSplit | read-write | current | The number of OSPF path splits. |
| 1.3.6.1.4.1.1751.2.43.2.9.1.3 | ScalarcjnOspfPeMax | read-write | current | Maximum number of path entries supported by OSPF |
| 1.3.6.1.4.1.1751.2.43.2.9.1.4 | ScalarcjnOspfSpfState | read-write | current | Sets state of OSPF to enabled/disabled |
| 1.3.6.1.4.1.1751.2.43.2.9.1.5 | ScalarcjnOspfAsbdrStatus | read-write | current | Sets flag for router to be as an Autonomous system boundary router enabled/disabled |
| 1.3.6.1.4.1.1751.2.43.2.9.1.6 | ScalarcjnOspfAutoVLinkCreate | read-write | current | Sets flag for automatic creation of virtual link enabled/disabled |
| 1.3.6.1.4.1.1751.2.43.2.9.1.7 | ScalarcjnOspfSpfHold | read-write | current | Time between two consecutive SPF chunks in seconds |
| 1.3.6.1.4.1.1751.2.43.2.9.1.8 | ScalarcjnOspfSpfSuspendTime | read-write | current | Sets the maximum number of LSAs to be used in each SPF chunk |
| 1.3.6.1.4.1.1751.2.43.2.9.1.9 | ScalarcjnOspfLocalExtType | read-write | current | Sets the metric type for local ext routes to 1 or 2 |
| 1.3.6.1.4.1.1751.2.43.2.9.1.10 | ScalarcjnOspfRipExtType | read-write | current | Sets the metric type for RIP ext routes to 1 or 2 |
| 1.3.6.1.4.1.1751.2.43.2.9.1.11 | ScalarcjnOspfSpfStaticExtType | read-write | current | Sets the metric type for static ext routes to 1 or 2 |
| 1.3.6.1.4.1.1751.2.43.2.9.1.12 | ScalarcjnOspfLowExtType | read-write | current | Sets the metric type for low preference static routes ext routes to 1 or 2 |
| 1.3.6.1.4.1.1751.2.43.2.9.1.13 | ScalarcjnOspfTraceFlags | read-write | current | Sets packet tracing for OSPF to on/off |
| 1.3.6.1.4.1.1751.2.43.2.9.1.14 | ScalarcjnOspfGlobalStatsReset | read-write | current | When set to the value enable (1) all OSPF statistics are reset to zero after which the value of this MIB object returns to disable(2) |
| 1.3.6.1.4.1.1751.2.43.2.9.2 | NodecjnOspfGblStatsGroup | |||
| 1.3.6.1.4.1.1751.2.43.2.9.2.1 | ScalarcjnOspfTOSCount | read-only | current | The number of types of services supported by OSPF. |
| 1.3.6.1.4.1.1751.2.43.2.9.2.2 | ScalarcjnOspfRunSpf | read-only | current | Number of times the SPF calculation has been run |
| 1.3.6.1.4.1.1751.2.43.2.9.2.3 | ScalarcjnOspfAbdrStatus | read-only | current | Shows the state of the router as an Area border router enabled/disabled |
| 1.3.6.1.4.1.1751.2.43.2.9.2.4 | ScalarcjnOspfTxNewLsa | read-only | current | Shows the number of new link State Advertisements transmitted |
| 1.3.6.1.4.1.1751.2.43.2.9.2.5 | ScalarcjnOspfRxNewLsa | read-only | current | Shows the number of new lsas received |
| 1.3.6.1.4.1.1751.2.43.2.9.2.6 | ScalarcjnOspfRxHelloCnt | read-only | current | Shows number of hello messages received |
| 1.3.6.1.4.1.1751.2.43.2.9.2.7 | ScalarcjnOspfTxHelloCnt | read-only | current | Shows number of hello messages transmitted |
| 1.3.6.1.4.1.1751.2.43.2.9.2.8 | ScalarcjnOspfRxDBDescCnt | read-only | current | Shows number of data base description packets received |
| 1.3.6.1.4.1.1751.2.43.2.9.2.9 | ScalarcjnOspfTxDBDescCnt | read-only | current | Shows number of data base description packets transmitted |
| 1.3.6.1.4.1.1751.2.43.2.9.2.10 | ScalarcjnOspfRxLsaAckCnt | read-only | current | Shows number of LSA ack packets received |
| 1.3.6.1.4.1.1751.2.43.2.9.2.11 | ScalarcjnOspfTxLsaAckCnt | read-only | current | Shows number of LSA ack packets transmitted |
| 1.3.6.1.4.1.1751.2.43.2.9.2.12 | ScalarcjnOspfRxLsaUpdCnt | read-only | current | Shows number of LSA update packets received |
| 1.3.6.1.4.1.1751.2.43.2.9.2.13 | ScalarcjnOspfTxLsaUpdCnt | read-only | current | Shows number of LSA update packets transmitted |
| 1.3.6.1.4.1.1751.2.43.2.9.2.14 | ScalarcjnOspfRxLsaReqCnt | read-only | current | Shows number of LSA request packets received |
| 1.3.6.1.4.1.1751.2.43.2.9.2.15 | ScalarcjnOspfTxLsaReqCnt | read-only | current | Shows number of LSA request packets transmitted |
| 1.3.6.1.4.1.1751.2.43.2.9.3 | TablecjnOspfIfTable | not-accessible | current | |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1 | RowcjnOspfIfEntry | not-accessible | current | |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.1 | ColumncjnOspfIfIpAddress | read-only | current | The interface ip address |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.2 | ColumncjnOspfIfRowStatus | read-create | current | The Status of this entry in the table. Note the available states: active(1), notInService(2) notReady(3), createAndGo(4), createAndWait(5) or destroy(6) |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.3 | ColumncjnOspfIfAreaId | read-create | current | The id of the area in which interface has been configured |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.4 | ColumncjnOspfIfMask | read-only | current | The network mask for the ip network the interface belongs to |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.5 | ColumncjnOspfIfType | read-only | current | The media type of the interface ( bcast, point to point, point to multipoint ) |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.6 | ColumncjnOspfIfCost | read-create | current | The cost associted with the interface used to determine the path cost when interface is used as a next hop |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.7 | ColumncjnOspfIfDrRouterId | read-only | current | The router id of the designated router on the network the interface belongs to |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.8 | ColumncjnOspfIfDrIpAddr | read-only | current | The ip address of the interface on which packets are received from the designated router for the network the interface belongs to |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.9 | ColumncjnOspfIfBDrRouterId | read-only | current | The router id of the back up designated router on the network the interface belongs to |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.10 | ColumncjnOspfIfDrState | read-only | current | The designated router status of the interface ( DR, BDR or NoDR ) |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.11 | ColumncjnOspfIfHelloTimer | read-create | current | The value of Hello timer for the interface with a default value of 10 seconds |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.12 | ColumncjnOspfIfDeadInterval | read-create | current | The value of dead interval timer for the interface with a default value of 40 seconds |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.13 | ColumncjnOspfIfRtrPriority | read-create | current | The interface priority used in the designated router election on the network the interface belongs to |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.14 | ColumncjnOspfIfRxmtTimer | read-create | current | The value of retransmit timer for the interface used to retransmit all the data description packets and link state advertisements packets requiring an ack or r… |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.15 | ColumncjnOspfIfTransitDelay | read-create | current | The delay in the packet transmission via the interface (default value is 1 second) |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.16 | ColumncjnOspfIfAuthKey | read-create | current | An eight character long simple password used for simple authentication type on an interface if authentication type is set to one. All the interfacew with OSPF … |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.17 | ColumncjnOspfIfMd5KeyId | read-create | current | MD5 key id used for type 2 authentication on an OSPF interface |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.18 | ColumncjnOspfIfMd5KeyFlags | read-create | current | flags used for type 2 authentication on an OSPF interface |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.19 | ColumncjnOspfIfMd5Key | read-create | current | The 16 character long MD5 key used for type 2 authentication on an OSPF interface |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.20 | ColumncjnOspfIfAuthType | read-create | current | The OSPF authentication type( 0, 1 or 2 ) |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.21 | ColumncjnOspfIfMtu | read-only | current | The maximum length of the packet transmitted on an OSPF interface |
| 1.3.6.1.4.1.1751.2.43.2.9.3.1.22 | ColumncjnOspfIfPollInterval | read-create | current | The value of Poll timer for the interface with a default value of 120 seconds |
| 1.3.6.1.4.1.1751.2.43.2.9.4 | TablecjnOspfVirtIfTable | not-accessible | current | Information about this router's virtual inter- faces. |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1 | RowcjnOspfVirtIfEntry | not-accessible | current | Information about a single Virtual Interface. |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.1 | ColumncjnOspfVirtIfAreaId | read-create | current | The virtual link's transit area area-id |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.2 | ColumncjnOspfVirtIfNbrRtrId | read-create | current | The router id of the router on the other end of the virtual link |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.3 | ColumncjnOspfVirtIfRowStatus | read-create | current | The Status of this entry in the table. Note the available states: active(1), notInService(2) notReady(3), createAndGo(4), createAndWait(5) or destroy(6) |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.4 | ColumncjnOspfVirtIfDrRouterId | read-only | current | The router id of the designated router on the network the virtual interface belongs to |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.5 | ColumncjnOspfVirtIfDrIpAddr | read-only | current | The ip address of the interface on which packets are received from the designated router on the network the virtual interfcae belongs to |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.6 | ColumncjnOspfVirtIfBDrRouterId | read-only | current | The router id of the backup designated router on the network the virtual interface belongs to |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.7 | ColumncjnOspfVirtIfDrState | read-only | current | The designated router state of the virtual interface ( DR, BDR, NoDR ) |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.8 | ColumncjnOspfVirtIfHelloTimer | read-create | current | The value of the periodic timer used to retransmit hello packets( default value set to 10 seconds ) |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.9 | ColumncjnOspfVirtIfDeadInterval | read-create | current | The value of the one shot timer used to detect if the neighbor is gone with a default value set to 40 seconds |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.10 | ColumncjnOspfVirtIfRtrPriority | read-create | current | The virtual interface priority used during the DR/BDR election with a default value of 1 |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.11 | ColumncjnOspfVirtIfRxmtTimer | read-create | current | The retransmit timer used to retarnsmit all OSPF packets requiring a response or ack with a default value set to 5 seconds |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.12 | ColumncjnOspfVirtIfTransitDelay | read-create | current | The delay in transmission of the via the virtual interface with a default value set to 1 second |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.13 | ColumncjnOspfVirtIfAuthKey | read-create | current | The eight character long simple password on a virtual link |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.14 | ColumncjnOspfVirtIfMd5Key | read-create | current | The 16 character long password for type 2 authentication on a virtual link |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.15 | ColumncjnOspfVirtIfMd5KeyId | read-create | current | The key id used in md5 authentication type on a virtual link |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.16 | ColumncjnOspfVirtIfMd5KeyFlags | read-create | current | The flags used in defining type 2 authentication on a virtual interface |
| 1.3.6.1.4.1.1751.2.43.2.9.4.1.17 | ColumncjnOspfVirtIfAuthType | read-create | current | The types of authentication supported on a virtual interface( 0, 1, 2 ) |
| 1.3.6.1.4.1.1751.2.43.2.9.5 | TablecjnOspfAreaTable | not-accessible | current | The OSPF Area Table |
| 1.3.6.1.4.1.1751.2.43.2.9.5.1 | RowcjnOspfAreaEntry | not-accessible | current | Each entry decsribes an OSPF Area that is part of the autonomous system |
| 1.3.6.1.4.1.1751.2.43.2.9.5.1.1 | ColumncjnOspfAreaId | read-only | current | Defines id number for an OSPF area |
| 1.3.6.1.4.1.1751.2.43.2.9.5.1.2 | ColumncjnOspfAreaRowStatus | read-create | current | The Status of this entry in the table. Note the available states: active(1), notInService(2) notReady(3), createAndGo(4), createAndWait(5) or destroy(6) |
| 1.3.6.1.4.1.1751.2.43.2.9.5.1.3 | ColumncjnOspfAreaType | read-create | current | Sets stub flag for an OSPF area to on/off |
| 1.3.6.1.4.1.1751.2.43.2.9.5.1.4 | ColumncjnOspfAreaTranslate | read-create | current | Turns the flag to translate type 7 lsa into type 5 to on/off for an OSPF area |
| 1.3.6.1.4.1.1751.2.43.2.9.5.1.5 | ColumncjnOspfAreaStubCost | read-create | current | Defines the cost for defaults routes advertised into stub area by an area border router |
| 1.3.6.1.4.1.1751.2.43.2.9.5.1.6 | ColumncjnOspfAreaT3Filter | read-create | current | sets the filtering of type 3 ase lsa into an OSPF area to on/off |
| 1.3.6.1.4.1.1751.2.43.2.9.5.1.7 | ColumncjnOspfAreaSpfRuns | read-only | current | The number of times SPF has been run in an OSPF area |
| 1.3.6.1.4.1.1751.2.43.2.9.5.1.8 | ColumncjnOspfAreaAbdrCnt | read-only | current | The number of area border routers in an OSPF area |
| 1.3.6.1.4.1.1751.2.43.2.9.5.1.9 | ColumncjnOspfAreaAsbdrCnt | read-only | current | The number of autonomous system boundary routers in an OSPF area |
| 1.3.6.1.4.1.1751.2.43.2.9.5.1.10 | ColumncjnOspfAreaNetCnt | read-only | current | The number networks configured in an OSPF area |
| 1.3.6.1.4.1.1751.2.43.2.9.6 | TablecjnOspfCnfgRangeTable | not-accessible | obsolete | |
| 1.3.6.1.4.1.1751.2.43.2.9.6.1 | RowcjnOspfCnfgRangeEntry | not-accessible | obsolete | Each entry describes an address range summary |
| 1.3.6.1.4.1.1751.2.43.2.9.6.1.1 | ColumncjnOspfCnfgRangeAreaId | read-create | current | OSPF area id for an area in which the range of ip addresses is to be configured |
| 1.3.6.1.4.1.1751.2.43.2.9.6.1.2 | ColumncjnOspfCnfgRangeIpAddr | read-create | current | The starting network number for a range of ip addresses to be configured |
| 1.3.6.1.4.1.1751.2.43.2.9.6.1.3 | ColumncjnOspfCnfgRangeMask | read-create | current | The ip network mask for a range of ip addresses to be configured |
| 1.3.6.1.4.1.1751.2.43.2.9.6.1.4 | ColumncjnOspfCnfgRowStatus | read-create | current | The Status of this entry in the table. Note the available states: active(1), notInService(2) notReady(3), createAndGo(4), createAndWait(5) or destroy(6) |
| 1.3.6.1.4.1.1751.2.43.2.9.6.1.5 | ColumncjnOspfCnfgRangeAdv | read-create | current | Flag to set the advertisement of a given ip netwoks range to on/off |
| 1.3.6.1.4.1.1751.2.43.2.9.7 | TablecjnOspfNbrTable | not-accessible | current | |
| 1.3.6.1.4.1.1751.2.43.2.9.7.1 | RowcjnOspfNbrEntry | not-accessible | current | Each entry describes a reachable neighbor, per interface, per area |
| 1.3.6.1.4.1.1751.2.43.2.9.7.1.1 | ColumncjnOspfNbrIpAddr | read-only | current | The ip address of the router on which the neighbor exists |
| 1.3.6.1.4.1.1751.2.43.2.9.7.1.2 | ColumncjnOspfNbrState | read-only | current | ospf state with respect to the router during and after the data base description process |
| 1.3.6.1.4.1.1751.2.43.2.9.7.1.3 | ColumncjnOspfNbrRtrId | read-only | current | OSPF router id of the neighbor |
| 1.3.6.1.4.1.1751.2.43.2.9.7.1.4 | ColumncjnOspfNbrMasterSlave | read-only | current | The OSPF neighbor master-slave state |
| 1.3.6.1.4.1.1751.2.43.2.9.7.1.5 | ColumncjnOspfNbrDrIpAddr | read-only | current | The ip address of the interface on which the designated router for the Neighbor router exists |
| 1.3.6.1.4.1.1751.2.43.2.9.7.1.6 | ColumncjnOspfNbrBackUpIpAddr | read-only | current | The ip address of the interface on which the backup designated router for the Neighbor router exists |
| 1.3.6.1.4.1.1751.2.43.2.9.7.1.7 | ColumncjnOspfNbrDDNum | read-only | current | The sequence number in the data description packet received from the neighbor during the data base description process |
| 1.3.6.1.4.1.1751.2.43.2.9.8 | TablecjnOspfLsaHdrTable | not-accessible | current | The OSPF Process's Link State Database. |
| 1.3.6.1.4.1.1751.2.43.2.9.8.1 | RowcjnOspfLsaHdrEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.1751.2.43.2.9.8.1.1 | ColumncjnOspfLsaHdrAreaId | read-only | current | The type (1..11) of link state advertisement in the link state advertisement packet header |
| 1.3.6.1.4.1.1751.2.43.2.9.8.1.2 | ColumncjnOspfLsaHdrLsaType | read-only | current | The type (1..11) of link state advertisement in the link state advertisement packet header |
| 1.3.6.1.4.1.1751.2.43.2.9.8.1.3 | ColumncjnOspfLsaHdrAdvRtrId | read-only | current | The router id of the advertising router in the link state advertisement header |
| 1.3.6.1.4.1.1751.2.43.2.9.8.1.4 | ColumncjnOspfLsaHdrLsId | read-only | current | The four byte link state id in a link state advertisement header |
| 1.3.6.1.4.1.1751.2.43.2.9.8.1.5 | ColumncjnOspfLsaHdrLsaAge | read-only | current | The link state advertisement age in the link state advertisement header |
| 1.3.6.1.4.1.1751.2.43.2.9.8.1.6 | ColumncjnOspfLsaHdrChecksum | read-only | current | The link state advertisement checksum in the link state advertisement header |
| 1.3.6.1.4.1.1751.2.43.2.9.8.1.7 | ColumncjnOspfLsaHdrSequence | read-only | current | The 32 bit link state advertisement sequence number in the link state advertisement header |
| 1.3.6.1.4.1.1751.2.43.2.9.9 | TablecjnOspfExtLsdbTable | not-accessible | current | The OSPF Process's Link State Database. |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1 | RowcjnOspfExtLsdbEntry | not-accessible | current | A single Ext Link State Advertisement. |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1.1 | ColumncjnOspfExtLsdbType | read-only | current | The type of external link state advertisement in the link state advertisement packet header |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1.2 | ColumncjnOspfExtLsdbAdvRtrId | read-only | current | The router id of the router advertising the external link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1.3 | ColumncjnOspfExtLsdbLsId | read-only | current | The link state id in the external link state advertisement packet header |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1.4 | ColumncjnOspfExtLsdbAge | read-only | current | The link state advertisement age of the external link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1.5 | ColumncjnOspfExtLsdbLsdbChecksum | read-only | current | The link state advertisement checksum of the external link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1.6 | ColumncjnOspfExtLsdbSequence | read-only | current | The link state advertisement sequence number of the external link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1.7 | ColumncjnOspfExtLsdNetMask | read-only | current | The network mask of the network being advertised in the external link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1.8 | ColumncjnOspfExtLsdbTOS | read-only | current | The type of service advertised in the external link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1.9 | ColumncjnOspfExtLsdbMetric | read-only | current | The metric associated for the network being advertised in the external link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1.10 | ColumncjnOspfExtLsdForwardingAddress | read-only | current | The next hop address in the external link state advertisement for the network being advertised |
| 1.3.6.1.4.1.1751.2.43.2.9.9.1.11 | ColumncjnOspfExtLsdbRouteTag | read-only | current | The 32 bit tag associated with the network being advertised in the external link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.10 | TablecjnOspfNetLsdbTable | not-accessible | current | The OSPF Process's Link State Database. |
| 1.3.6.1.4.1.1751.2.43.2.9.10.1 | RowcjnOspfNetLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.1751.2.43.2.9.10.1.1 | ColumncjnOspfNetLsdbAreaId | read-only | current | The type of netwok link state advertisement (2) in the link state advertisement packet header |
| 1.3.6.1.4.1.1751.2.43.2.9.10.1.2 | ColumncjnOspfNetLsdbType | read-only | current | The type of netwok link state advertisement (2) in the link state advertisement packet header |
| 1.3.6.1.4.1.1751.2.43.2.9.10.1.3 | ColumncjnOspfNetLsdbAdvRtrId | read-only | current | The router id of the router advertising the network link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.10.1.4 | ColumncjnOspfNetLsdbLsId | read-only | current | The link state id in the network link state advertisement packet header |
| 1.3.6.1.4.1.1751.2.43.2.9.10.1.5 | ColumncjnOspfNetLsdbAge | read-only | current | The age of the network link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.10.1.6 | ColumncjnOspfNetLsdbLsdbChecksum | read-only | current | The checksum of the external link state advertisemen |
| 1.3.6.1.4.1.1751.2.43.2.9.10.1.7 | ColumncjnOspfNetLsdbSequence | read-only | current | The sequence number of the external link state advertisemen |
| 1.3.6.1.4.1.1751.2.43.2.9.10.1.8 | ColumncjnOspfNetLsdNetMask | read-only | current | The ip mask of the network being advertised by the network link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.11 | TablecjnOspfRouterLsdbTable | not-accessible | current | The OSPF Process's Link State Database. |
| 1.3.6.1.4.1.1751.2.43.2.9.11.1 | RowcjnOspfRouterLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.1751.2.43.2.9.11.1.1 | ColumncjnOspfRouterLsdbAreaId | read-only | current | |
| 1.3.6.1.4.1.1751.2.43.2.9.11.1.2 | ColumncjnOspfRouterLsdbType | read-only | current | The type of the link being advertised in the router link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.11.1.3 | ColumncjnOspfRouterLsdbRtrId | read-only | current | |
| 1.3.6.1.4.1.1751.2.43.2.9.11.1.4 | ColumncjnOspfRouterLsdbLsId | read-only | current | The link state id (1) associated with links advertised in the router link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.11.1.5 | ColumncjnOspfRouterLsdbLinkData | read-only | current | The link data associated with links advertised in the router link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.11.1.6 | ColumncjnOspfRouterLsdbNumOfTos | read-only | current | The type of service for the link being advertised in the router link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.11.1.7 | ColumncjnOspfRouterLsdbMet | read-only | current | The metric type associated with the link being advertised in the router link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.12 | TablecjnOspfRouterLsaHdrTable | not-accessible | current | The OSPF Process's Router LSA header Database. |
| 1.3.6.1.4.1.1751.2.43.2.9.12.1 | RowcjnOspfRouterLsaHdrEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.1751.2.43.2.9.12.1.1 | ColumncjnOspfRouterLsaHdrAreaId | read-only | current | |
| 1.3.6.1.4.1.1751.2.43.2.9.12.1.2 | ColumncjnOspfRouterLsaHdrType | read-only | current | The router link type( 1 ) |
| 1.3.6.1.4.1.1751.2.43.2.9.12.1.3 | ColumncjnOspfRouterLsaHdrAdvRtrId | read-only | current | The router id of the router advertising of the router link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.12.1.4 | ColumncjnOspfRouterLsaHdrLsId | read-only | current | The link state id in the router link state advertisement packet header |
| 1.3.6.1.4.1.1751.2.43.2.9.12.1.5 | ColumncjnOspfRouterLsaHdrAge | read-only | current | The age of the router link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.12.1.6 | ColumncjnOspfRouterLsaHdrChecksum | read-only | current | The checksum of the router link state advertisemen |
| 1.3.6.1.4.1.1751.2.43.2.9.12.1.7 | ColumncjnOspfRouterLsaHdrSequence | read-only | current | The sequence number of the router link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.12.1.8 | ColumncjnOspfRouterLsaHdrFlags | read-only | current | The flags in the router link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.12.1.9 | ColumncjnOspfRouterLsaHdrLinkCount | read-only | current | number of links being advertised in the router link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.13 | TablecjnOspfSumLsaTable | not-accessible | current | The OSPF Process's Link State Database. |
| 1.3.6.1.4.1.1751.2.43.2.9.13.1 | RowcjnOspfSumLsaEntry | not-accessible | current | A single Ext Link State Advertisement. |
| 1.3.6.1.4.1.1751.2.43.2.9.13.1.1 | ColumncjnOspfSumLsaType | read-only | current | The type of summary link state advertisement (3 or 4) in the link state advertisement packet header |
| 1.3.6.1.4.1.1751.2.43.2.9.13.1.2 | ColumncjnOspfSumLsaAdvRtrId | read-only | current | The router id of the router advertising the summary link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.13.1.3 | ColumncjnOspfSumLsaLsId | read-only | current | The link state id of the summary link state advertisement packet header |
| 1.3.6.1.4.1.1751.2.43.2.9.13.1.4 | ColumncjnOspfSumLsaLsdbAge | read-only | current | The age of the summary link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.13.1.5 | ColumncjnOspfSumLsaChecksum | read-only | current | The checksum of the summary link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.13.1.6 | ColumncjnOspfSumLsaSequence | read-only | current | The checksum of the summary link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.13.1.7 | ColumncjnOspfSumLsaMask | read-only | current | The network mask of the type 3 summay link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.13.1.8 | ColumncjnOspfSumLsaTOS | read-only | current | The type of service for the network advertised by the type 3 summary link state advertisement |
| 1.3.6.1.4.1.1751.2.43.2.9.13.1.9 | ColumncjnOspfSumLsaMetric | read-only | current | The metric type for the network advertised by the type 3 summary link state advertisemen |