MIB Viewer

OSPF-TE-DRAFT00-MIB

61 objects
This MIB contains managed object definitions for extensions to the OSPF MIB in support of Traffic Engienering (TE). Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFCXXX; see the RFC itself for full legal notices.
Imported Objects
INET-ADDRESS-MIBInetAddress InetAddressType
OSPF-MIBospfLsdbLsid ospfRouterId
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY OBJECT-TYPE transmission Unsigned32
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.9988IdentityospfTeMIBThis MIB contains managed object definitions for extensions to the OSPF MIB in support of Traffic Engienering (TE). Copyright (C) The Internet Society (2006). …
1.3.6.1.2.1.10.9988.0NodeospfTeNotifications
1.3.6.1.2.1.10.9988.1NodeospfTeObjects
1.3.6.1.2.1.10.9988.1.1NodeospfTeScalars
1.3.6.1.2.1.10.9988.1.2NodeospfTeTables
1.3.6.1.2.1.10.9988.1.2.1TableospfTeLsdbTablenot-accessiblecurrentThis table indicates multiple sub-TLVs information in opaque LSA which have been supported by [OSPF-TE].
1.3.6.1.2.1.10.9988.1.2.1.1RowospfTeLsdbEntrynot-accessiblecurrentThis entry contains each sub-TLVs information commonly utilized in both MPLS and GMPLS
1.3.6.1.2.1.10.9988.1.2.1.1.1ColumnospfTeLinkTyperead-onlycurrentThis indicates the type of the link such as point-to-point or multi-access
1.3.6.1.2.1.10.9988.1.2.1.1.1ColumnospfTeSrlgIndexnot-accessiblecurrentThis index is utilized to identify multiple SRLG values on a local or remote TE link.
1.3.6.1.2.1.10.9988.1.2.1.1.2ColumnospfTeLinkIdAddrread-onlycurrentThis indicates the Router ID of the neighbor in the case of point-to-point links. This also indicates the interface address of the designated router in the cas…
1.3.6.1.2.1.10.9988.1.2.1.1.3ColumnospfTeLinkIdAddrTyperead-onlycurrentThis object indicates the type of TE link ID address.
1.3.6.1.2.1.10.9988.1.2.1.1.4ColumnospfTeMetricread-onlycurrentThis indicates the traffic engineering metric value of the TE link.
1.3.6.1.2.1.10.9988.1.2.1.1.5ColumnospfTeMaxBandwidthread-onlycurrentThis indicates the maximum bandwidth that can be used on this link in this direction
1.3.6.1.2.1.10.9988.1.2.1.1.6ColumnospfTeMaxReservableBandwidthread-onlycurrent
1.3.6.1.2.1.10.9988.1.2.1.1.7ColumnospfTeUnreservedBandwidthPri0read-onlycurrentThis indicates the amount of bandwidth not yet reserved at the priority 0
1.3.6.1.2.1.10.9988.1.2.1.1.8ColumnospfTeUnreservedBandwidthPri1read-onlycurrentThis indicates the amount of bandwidth not yet reserved at the priority 1
1.3.6.1.2.1.10.9988.1.2.1.1.9ColumnospfTeUnreservedBandwidthPri2read-onlycurrentThis indicates the amount of bandwidth not yet reserved at the priority 2
1.3.6.1.2.1.10.9988.1.2.1.1.10ColumnospfTeUnreservedBandwidthPri3read-onlycurrentThis indicates the amount of bandwidth not yet reserved at the priority 3
1.3.6.1.2.1.10.9988.1.2.1.1.11ColumnospfTeUnreservedBandwidthPri4read-onlycurrentThis indicates the amount of bandwidth not yet reserved at the priority 4
1.3.6.1.2.1.10.9988.1.2.1.1.12ColumnospfTeUnreservedBandwidthPri5read-onlycurrent
1.3.6.1.2.1.10.9988.1.2.1.1.13ColumnospfTeUnreservedBandwidthPri6read-onlycurrentThis indicates the amount of bandwidth not yet reserved at the priority 6
1.3.6.1.2.1.10.9988.1.2.1.1.14ColumnospfTeUnreservedBandwidthPri7read-onlycurrentThis indicates the amount of bandwidth not yet reserved at the priority 7
1.3.6.1.2.1.10.9988.1.2.1.1.15ColumnospfTeAdministrativeGroupread-onlycurrentThis indicates the Administrative Group which the link belong to. Since the value is a bit mask, the link can belong to multiple groups. This is also called Re…
1.3.6.1.2.1.10.9988.1.2.1.1.16ColumnospfTeLocalIdread-onlycurrentThis indicates the Link local identifier of an unnumbered link.
1.3.6.1.2.1.10.9988.1.2.1.1.17ColumnospfTeRemoteIdread-onlycurrentThis indicates the Link remote identifier of an unnumbered link.
1.3.6.1.2.1.10.9988.1.2.1.1.18ColumnospfTeLinkProtectionTyperead-onlycurrentThis object indicates the protection type of the TE link
1.3.6.1.2.1.10.9988.1.2.2TableospfTeLocalIntAddrTablenot-accessiblecurrentThis table contains the IP address information of a local TE link.
1.3.6.1.2.1.10.9988.1.2.2.1RowospfTeLocalIntAddrEntrynot-accessiblecurrentThis entry contains the IP address information of the local TE link.
1.3.6.1.2.1.10.9988.1.2.2.1.1ColumnospfTeLocalIntAddrIndexnot-accessiblecurrentThis indicates the index to identify multiple local TE links
1.3.6.1.2.1.10.9988.1.2.2.1.2ColumnospfTeLocalIntAddrread-onlycurrent
1.3.6.1.2.1.10.9988.1.2.2.1.3ColumnospfTeLocalIntAddrTyperead-onlycurrentThis object indicates the type of local TE link address.
1.3.6.1.2.1.10.9988.1.2.3TableospfTeRemoteIntAddrTablenot-accessiblecurrentThis table contains the IP address information of a remote TE link.
1.3.6.1.2.1.10.9988.1.2.3.1RowospfTeRemoteIntAddrEntrynot-accessiblecurrentThis entry contains the IP address information of the remote TE link.
1.3.6.1.2.1.10.9988.1.2.3.1.1ColumnospfTeRemoteIntAddrIndexnot-accessiblecurrentThis indicates the index to identify multiple remote TE links.
1.3.6.1.2.1.10.9988.1.2.3.1.2ColumnospfTeRemoteIntAddrread-onlycurrentThis object indicates the address of the remote TE link.
1.3.6.1.2.1.10.9988.1.2.3.1.3ColumnospfTeRemoteIntAddrTyperead-onlycurrentThis object indicates the type of the remote TE link address.
1.3.6.1.2.1.10.9988.1.2.4TableospfTeSwCapTablenot-accessiblecurrentThis table contains the GMPLS OSPF TE switching capability information.
1.3.6.1.2.1.10.9988.1.2.4.1RowospfTeSwCapEntrynot-accessiblecurrentThis entry relates each TE link with its GMPLS TE switching capability information. IF the MIB deals with only OSPF-TE information, the value of each object re…
1.3.6.1.2.1.10.9988.1.2.4.1.1ColumnospfTeSwCapIndexnot-accessiblecurrentThis index is utilized to identify multiple switching functions on a local or remote TE link.
1.3.6.1.2.1.10.9988.1.2.4.1.2ColumnospfTeSwitchingTyperead-onlycurrentThis object indicates the GMPLS switching capability assigned to the TE link.
1.3.6.1.2.1.10.9988.1.2.4.1.3ColumnospfTeEncodingread-onlycurrentThis object indicates the GMPLS encoding type assigned to the TE link.
1.3.6.1.2.1.10.9988.1.2.4.1.4ColumnospfTeMaxLspBandwidthPri0read-onlycurrent
1.3.6.1.2.1.10.9988.1.2.4.1.5ColumnospfTeMaxLspBandwidthPri1read-onlycurrentThis object indicates the maximum bandwidth of the TE link at the priority 1 for GMPLS LSP creation.
1.3.6.1.2.1.10.9988.1.2.4.1.6ColumnospfTeMaxLspBandwidthPri2read-onlycurrentThis object indicates the maximum bandwidth of the TE link at the priority 2 for GMPLS LSP creation.
1.3.6.1.2.1.10.9988.1.2.4.1.7ColumnospfTeMaxLspBandwidthPri3read-onlycurrentThis object indicates the maximum bandwidth of the TE link at the priority 3 for GMPLS LSP creation.
1.3.6.1.2.1.10.9988.1.2.4.1.8ColumnospfTeMaxLspBandwidthPri4read-onlycurrentThis object indicates the maximum bandwidth of the TE link at the priority 4 for GMPLS LSP creation.
1.3.6.1.2.1.10.9988.1.2.4.1.9ColumnospfTeMaxLspBandwidthPri5read-onlycurrentThis object indicates the maximum bandwidth of the TE link at the priority 5 for GMPLS LSP creation.
1.3.6.1.2.1.10.9988.1.2.4.1.10ColumnospfTeMaxLspBandwidthPri6read-onlycurrent
1.3.6.1.2.1.10.9988.1.2.4.1.11ColumnospfTeMaxLspBandwidthPri7read-onlycurrentThis object indicates the maximum bandwidth of the TE link at the priority 7 for GMPLS LSP creation.
1.3.6.1.2.1.10.9988.1.2.4.1.12ColumnospfTeLspMinBandwidthread-onlycurrentThis object indicates the minimum bandwidth of the TE link for GMPLS LSP creation if the switching capability field is TDM, PSC- 1, PSC-2, PSC-3, or PSC-4.
1.3.6.1.2.1.10.9988.1.2.4.1.13ColumnospfTeIntMturead-writecurrentThis object indicates the MTU of the local or remote TE link
1.3.6.1.2.1.10.9988.1.2.4.1.14ColumnospfTeIndicationread-onlycurrentThis object indicates whether the interface supports Standard or Arbitrary SONET/SDH.
1.3.6.1.2.1.10.9988.1.2.5TableospfTeSrlgTablenot-accessiblecurrentThis table contains the SRLG information of the TE link.
1.3.6.1.2.1.10.9988.1.2.5.1RowospfTeSrlgEntrynot-accessiblecurrentThis entry relates each TE link with its SRLG information.
1.3.6.1.2.1.10.9988.1.2.5.1.2ColumnospfTeSrlgread-onlycurrentThis object indicate the SRLG value assigned to a local or remote TE link
1.3.6.1.2.1.10.9988.2NodeospfTeConformance
1.3.6.1.2.1.10.9988.2.1NodeospfTeGroups
1.3.6.1.2.1.10.9988.2.1.1GroupospfTeMainGroupcurrentCollection of objects for OSPF-TE management
1.3.6.1.2.1.10.9988.2.2NodeospfTeCompliances
1.3.6.1.2.1.10.9988.2.2.1ComplianceospfTeModuleFullCompliancecurrentCompliance statement for agents provides full support for the OSPF-TE MIB
1.3.6.1.2.1.10.9988.2.2.2ComplianceospfTeModuleReadOnlyCompliancecurrentCompliance requirement for implementations only provide read-only support for OSPF-TE. Such devices can then be monitored but cannot be configured using this M…