Olicom-crossfireAtmSwitch-MIB

770 objects

No module-level DESCRIPTION found.

Imported Objects

Olicom-MIB	controlTime ocmibsCrossfireAtmMIB
RFC-1212	OBJECT-TYPE
RFC-1215	TRAP-TYPE
RFC1155-SMI	Counter enterprises Gauge IpAddress TimeTicks
RFC1213-MIB	DisplayString ifIndex
RFC1231-MIB	MacAddress

OID	Name	Access	Status	Description
0.0	ScalarifTestCode	read-only	mandatory
0.0	ScalarifTestType	read-write	mandatory
0.0	NodenoTest
0.0	NodetestCodeUnknown
1.3.6.1.4.1.285	Nodeolicom
1.3.6.1.4.1.285.2	Nodeocmibs
1.3.6.1.4.1.285.2.6	NodeocmibsCrossfireAtmMIB
1.3.6.1.4.1.285.2.6.1	NodecrossfireAtmInfo
1.3.6.1.4.1.285.2.6.1	Noderestart			The switch has restarted.
1.3.6.1.4.1.285.2.6.1.1	NodeinfoProcessorModule
1.3.6.1.4.1.285.2.6.1.1.1	ScalarinfoProcessorModuleHwProductId	read-only	mandatory	The processor module product ID from the EEPROM.
1.3.6.1.4.1.285.2.6.1.1.2	ScalarinfoProcessorModuleHwVersion	read-only	mandatory	The processor module version from the EEPROM.
1.3.6.1.4.1.285.2.6.1.1.3	ScalarinfoProcessorModuleHwEcoLevel	read-only	mandatory	The processor module ECO level - not used.
1.3.6.1.4.1.285.2.6.1.1.4	ScalarinfoProcessorModuleHwSerialNumber	read-only	mandatory	The processor module serial number from the EEPROM.
1.3.6.1.4.1.285.2.6.1.1.5	TableinfoProcessorModuleHwOptionTable	not-accessible	mandatory	The table of processor module options as found in the EEPROM.
1.3.6.1.4.1.285.2.6.1.1.5.1	RowinfoProcessorModuleHwOptionEntry	not-accessible	mandatory	Each row in this table describes one processor module option.
1.3.6.1.4.1.285.2.6.1.1.5.1.1	ColumninfoProcessorModuleHwOptionNo	read-only	mandatory	An arbitrary integer used to differentiate multiple rows in the table.
1.3.6.1.4.1.285.2.6.1.1.5.1.2	ColumninfoProcessorModuleHwOption	read-only	mandatory	A processor module option string from the EEPROM.
1.3.6.1.4.1.285.2.6.1.2	NodeinfoFeatureModule
1.3.6.1.4.1.285.2.6.1.2.1	ScalarinfoFeatureModuleHwProductId	read-only	mandatory	The feature module product ID from the EEPROM.
1.3.6.1.4.1.285.2.6.1.2.2	ScalarinfoFeatureModuleHwVersion	read-only	mandatory	The feature module version from the EEPROM.
1.3.6.1.4.1.285.2.6.1.2.3	ScalarinfoFeatureModuleHwEcoLevel	read-only	mandatory	The feature module ECO level - not used.
1.3.6.1.4.1.285.2.6.1.2.4	ScalarinfoFeatureModuleHwSerialNumber	read-only	mandatory	The feature module serial number from the EEPROM.
1.3.6.1.4.1.285.2.6.1.2.5	TableinfoFeatureModuleHwOptionTable	not-accessible	mandatory	The table of feature module options as found in the EEPROM.
1.3.6.1.4.1.285.2.6.1.2.5.1	RowinfoFeatureModuleHwOptionEntry	not-accessible	mandatory	Each row in this table describes one feature module option.
1.3.6.1.4.1.285.2.6.1.2.5.1.1	ColumninfoFeatureModuleHwOptionNo	read-only	mandatory	An arbitrary integer used to differentiate multiple rows in the table.
1.3.6.1.4.1.285.2.6.1.2.5.1.2	ColumninfoFeatureModuleHwOption	read-only	mandatory	A feature module option string from the EEPROM.
1.3.6.1.4.1.285.2.6.1.3	NodeinfoXModule
1.3.6.1.4.1.285.2.6.1.3.1	TableinfoXModuleTable	not-accessible	mandatory	This table contains information for each of the expansion modules installed in the switch.
1.3.6.1.4.1.285.2.6.1.3.1.1	RowinfoXModuleEntry	not-accessible	mandatory	Each row in this table contains information for one expansion module.
1.3.6.1.4.1.285.2.6.1.3.1.1.1	ColumninfoXModuleSlotIndex	read-only	mandatory	The slot number for the expansion module. It is used to index the expansion module in the table.
1.3.6.1.4.1.285.2.6.1.3.1.1.2	ColumninfoXModuleHwProductId	read-only	mandatory	The expansion module product ID from the EEPROM.
1.3.6.1.4.1.285.2.6.1.3.1.1.3	ColumninfoXModuleHwVersion	read-only	mandatory	The expansion module version from the EEPROM.
1.3.6.1.4.1.285.2.6.1.3.1.1.4	ColumninfoXModuleHwEcoLevel	read-only	mandatory	The expansion module ECO level - not used.
1.3.6.1.4.1.285.2.6.1.3.1.1.5	ColumninfoXModuleHwSerialNumber	read-only	mandatory	The expansion module serial number from the EEPROM.
1.3.6.1.4.1.285.2.6.1.3.2	TableinfoXModuleHwOptionTable	not-accessible	mandatory	The table of expansion module options as found in the EEPROM. There is one row in the table for each expansion module and each option.
1.3.6.1.4.1.285.2.6.1.3.2.1	RowinfoXModuleHwOptionEntry	not-accessible	mandatory	Each row in this table describes one expansion module option.
1.3.6.1.4.1.285.2.6.1.3.2.1.1	ColumninfoXModuleHwOptionSlotIndex	read-only	mandatory	The slot number for the expansion module. It is used to index the expansion module in the table.
1.3.6.1.4.1.285.2.6.1.3.2.1.2	ColumninfoXModuleHwOptionNo	read-only	mandatory	An arbitrary integer used to differentiate multiple rows for the same expansion module.
1.3.6.1.4.1.285.2.6.1.3.2.1.3	ColumninfoXModuleHwOption	read-only	mandatory	An expansion module option string from the EEPROM.
1.3.6.1.4.1.285.2.6.1.4	NodeinfoIfIndex
1.3.6.1.4.1.285.2.6.1.4.1	ScalarinfoIfIndexLan	read-only	mandatory	This ifIndex value designates the Ethernet LAN interface on the switch.
1.3.6.1.4.1.285.2.6.1.4.2	ScalarinfoIfIndexSlip	read-only	mandatory	This ifIndex value designates the SLIP interface on the switch.
1.3.6.1.4.1.285.2.6.1.4.3	ScalarinfoIfIndexElan	read-only	mandatory	This ifIndex value designates the emulated LAN user side virtual interface on the switch.
1.3.6.1.4.1.285.2.6.1.4.4	ScalarinfoIfIndexClassicalIp	read-only	mandatory	This ifIndex value designates the Classical IP virtual interface on the switch.
1.3.6.1.4.1.285.2.6.1.4.5	ScalarinfoIfIndexRfc1483Bridged	read-only	mandatory	This ifIndex value designates the Classical IP (RFC 1483 bridged encapsulation) virtual interface on the switch.
1.3.6.1.4.1.285.2.6.1.4.6	ScalarinfoIfIndexRfc1483Routed	read-only	mandatory	This ifIndex value designates the Classical IP (RFC 1483 routed encapsulation) virtual interface on the switch.
1.3.6.1.4.1.285.2.6.1.4.7	ScalarinfoIfIndexAtmNode	read-only	mandatory	This ifIndex value designates the network node side virtual interface on the switch which is used when the switch communicates with itself.
1.3.6.1.4.1.285.2.6.1.5	NodetermRestartInfo
1.3.6.1.4.1.285.2.6.1.5.1	ScalartermRestartInfoRestartTime	read-only	mandatory	Time when the system was restarted (measured in seconds since 00:00:00 UTC on 1 January 1970).
1.3.6.1.4.1.285.2.6.1.5.2	ScalartermRestartInfoSwSection1StatusWord	read-only	mandatory	The value of the status word in the first section of the software image flash memory.
1.3.6.1.4.1.285.2.6.1.5.3	ScalartermRestartInfoSwSection2StatusWord	read-only	mandatory	The value of the status word in the second section of the software image flash memory.
1.3.6.1.4.1.285.2.6.1.5.4	ScalartermRestartInfoSwImageLoaded	read-only	mandatory	The number of the software image currently running.
1.3.6.1.4.1.285.2.6.1.5.5	ScalartermRestartInfoFutureTestMode	read-only	mandatory	Indicates if the software is running in 'Future Test' mode, i.e. if this is a one-shot test of a software image.
1.3.6.1.4.1.285.2.6.1.5.6	ScalartermRestartInfoBootpExecuted	read-only	mandatory	Indicates if BOOTP was executed to load the software image.
1.3.6.1.4.1.285.2.6.1.5.7	ScalartermRestartInfoReloadTime	read-only	mandatory	Time when the software was stored in the switch (measured in seconds since 00:00:00 UTC on 1 January 1970).
1.3.6.1.4.1.285.2.6.1.5.8	ScalartermRestartInfoBootpReason	read-only	mandatory	The reason that BOOTP was executed to load the software. The possible values are: noSw There was no executable software image in the switch. chksumError The so…
1.3.6.1.4.1.285.2.6.1.5.9	ScalartermRestartInfoServerIpAddress	read-only	mandatory	The IP address of the server that provided the software image during the BOOTP operation.
1.3.6.1.4.1.285.2.6.1.5.10	ScalartermRestartInfoServerMacAddress	read-only	mandatory	The MAC address of the of the server that provided the software image during the BOOTP operation.
1.3.6.1.4.1.285.2.6.1.5.11	ScalartermRestartInfoFileName	read-only	mandatory	The name of the software image file on the BOOTP server.
1.3.6.1.4.1.285.2.6.1.5.12	ScalartermRestartInfoBbsramTerminationTimestamp	read-only	mandatory	Time when the system last closed down (measured in seconds since 00:00:00 UTC on 1 January 1970).
1.3.6.1.4.1.285.2.6.1.5.13	ScalartermRestartInfoTerminationReason	read-only	mandatory	The reason the system last closed down. Possible values are: unknown Unknown reason. controlled Management requested termination. controlledHalt The switch was…
1.3.6.1.4.1.285.2.6.1.5.14	ScalartermRestartInfoRestartReason	read-only	mandatory	The reason the system started. Possible values are: reset The 'reset' button on the switch font panel was pressed. default The 'default' button on the switch f…
1.3.6.1.4.1.285.2.6.1.5.15	ScalartermRestartInfoHwReconfigState	read-only	mandatory	The reconfiguration state of the switch. Possible values are: totalReconfig The stored configuration is invalidated because of hardware changes. partialReconfi…
1.3.6.1.4.1.285.2.6.1.5.16	ScalartermRestartInfoBbsram	read-only	mandatory	Data stored in battery backed-up RAM when the switch terminated.
1.3.6.1.4.1.285.2.6.2	NodecrossfireAtmConfiguration
1.3.6.1.4.1.285.2.6.2.1	NodeconfigAddressing
1.3.6.1.4.1.285.2.6.2.1.1	ScalarconfigSwitchAddrPrefixType	read-write	mandatory	The ATM address prefix type.
1.3.6.1.4.1.285.2.6.2.1.2	ScalarconfigSwitchAddrPrefixSize	read-write	mandatory	The number of octets in configSwitchAddrAtmPrefix.
1.3.6.1.4.1.285.2.6.2.1.3	ScalarconfigSwitchAddrAtmPrefix	read-write	mandatory	The next octets of the ATM address.
1.3.6.1.4.1.285.2.6.2.1.4	ScalarconfigSwitchAddrAtmAddress	read-only	mandatory	The complete ATM address (with a 0 in the final octet, i.e. the selector).
1.3.6.1.4.1.285.2.6.2.2	NodeconfigClocking
1.3.6.1.4.1.285.2.6.2.2.1	ScalarconfigNetworkClockSource	read-write	mandatory	Controls whether the internal clock is the master clock or an incoming network clock is redistributed to all other ports.
1.3.6.1.4.1.285.2.6.2.2.2	ScalarconfigNetworkClockEPortIndex	read-write	mandatory	The ePort that is the clock source if configNetworkClockSource has the value 'external'.
1.3.6.1.4.1.285.2.6.2.3	NodeconfigLane
1.3.6.1.4.1.285.2.6.2.3.1	ScalarconfigLaneControlAdminStatus	read-write	mandatory	Enable or disable LAN emulation services.
1.3.6.1.4.1.285.2.6.2.3.2	ScalarconfigLaneControlLecsAdminStatus	read-write	mandatory	Enable or disable the LAN Emulation Configuration Server (LECS).
1.3.6.1.4.1.285.2.6.2.3.3	ScalarconfigLaneControlLesBusAdminStatus	read-write	mandatory	Enable or disable the LAN Emulation Server (LES) and Broadcast and Unknown Server (BUS).
1.3.6.1.4.1.285.2.6.2.4	NodeconfigMonitoring
1.3.6.1.4.1.285.2.6.2.4.1	ScalarconfigMonitorEPortAdminStatus	read-write	mandatory	Enable or disable copying of cells to the last iPort.
1.3.6.1.4.1.285.2.6.2.4.2	ScalarconfigMonitorEPortIPortSlotIndex	read-write	mandatory	The number of the expansion module containing the iPort whose inbound or outbound cells are to be copied.
1.3.6.1.4.1.285.2.6.2.4.3	ScalarconfigMonitorEPortIPortRIndex	read-write	mandatory	The number of the iPort whose inbound or outbound cells are to be copied.
1.3.6.1.4.1.285.2.6.2.4.4	ScalarconfigMonitorEPortDirection	read-write	mandatory	Controls if the inbound (rx) or outbound (tx) cells are to be copied.
1.3.6.1.4.1.285.2.6.2.6	NodeconfigTm
1.3.6.1.4.1.285.2.6.2.6.1	ScalarconfigTmControlMode	read-write	mandatory	Controls whether ABR traffic should be controlled through EFCI (Explicit Forward Congestion Indication), ER (Explicit Rate) or no mechanism at all.
1.3.6.1.4.1.285.2.6.2.6.2	ScalarconfigTmControlEarlyPacketDiscardAdminStatus	read-write	mandatory	Enables or disables early packed discard.
1.3.6.1.4.1.285.2.6.2.6.3	ScalarconfigTmControlVbrTrafficAllocation	read-write	mandatory	Indicates if bandwidth allocation of VBR connections should be based on the peak cell rate (strictAllocation) or a calculation of equivalent bandwidth (overSub…
1.3.6.1.4.1.285.2.6.2.6.4	ScalarconfigTmControlErTuningAlpha	read-write	mandatory	100 times the value of the alpha parameter in the explicit rate algorithm.
1.3.6.1.4.1.285.2.6.2.6.5	ScalarconfigTmControlErTuningBeta	read-write	mandatory	The value of the beta parameter in the explicit rate algorithm.
1.3.6.1.4.1.285.2.6.2.6.6	ScalarconfigTmControlErTuningGamma	read-write	mandatory	The value of the gamma parameter in the explicit rate algorithm.
1.3.6.1.4.1.285.2.6.2.6.7	ScalarconfigTmControlErTuningDelta	read-write	mandatory	100 times the value of the delta parameter in the explicit rate algorithm.
1.3.6.1.4.1.285.2.6.2.6.8	ScalarconfigTmControlErTuningLambda	read-write	mandatory	The value of the lambda parameter in the explicit rate algorithm.
1.3.6.1.4.1.285.2.6.2.6.9	ScalarconfigTmControlErTuningTau	read-write	mandatory	The value (in microseconds) of the tau parameter in the explicit rate algorithm.
1.3.6.1.4.1.285.2.6.2.6.10	ScalarconfigTmControlErTuningPhi	read-write	mandatory	100 times the value of the phi parameter in the explicit rate algorithm.
1.3.6.1.4.1.285.2.6.2.6.11	ScalarconfigTmControlErTuningPsi	read-write	mandatory	The value of the psi parameter in the explicit rate algorithm.
1.3.6.1.4.1.285.2.6.2.6.12	TableconfigTmServiceClassMapTable	not-accessible	mandatory	This table maps each traffic category to one of the four scheduling queues that are associated with each iPort in the switch.
1.3.6.1.4.1.285.2.6.2.6.12.1	RowconfigTmServiceClassMapEntry	not-accessible	mandatory	Each row in this table describes one service category.
1.3.6.1.4.1.285.2.6.2.6.12.1.1	ColumnconfigTmServiceClassMapServiceClass	read-only	mandatory	The service category described by this row.
1.3.6.1.4.1.285.2.6.2.6.12.1.2	ColumnconfigTmServiceClassMapSchedulingQueue	read-write	mandatory	The cell scheduling queue used by this service category.
1.3.6.1.4.1.285.2.6.2.7	NodeconfigTrafficDescr
1.3.6.1.4.1.285.2.6.2.7.1	ScalartrafficDescriptorTableNextIndex	read-only	mandatory	The next unused row in trafficDescriptorTable.
1.3.6.1.4.1.285.2.6.2.7.2	TabletrafficDescriptorTable	not-accessible	mandatory	This table contains all the traffic descriptors in the switch. Each traffic descriptor may be associated with zero or more connections passing through the swit…
1.3.6.1.4.1.285.2.6.2.7.2.1	RowtrafficDescriptorEntry	not-accessible	mandatory	Each row in this table describes one traffic descriptor.
1.3.6.1.4.1.285.2.6.2.7.2.1.1	ColumntrafficDescriptorIndex	read-only	mandatory	An arbitrary integer used to differentiate multiple rows in the table.
1.3.6.1.4.1.285.2.6.2.7.2.1.2	ColumntrafficDescriptorCreationMode	read-only	mandatory	The reason this traffic descriptor was created. Possible values are: switchedConnection The traffic descriptor was created because signalling established a con…
1.3.6.1.4.1.285.2.6.2.7.2.1.3	ColumntrafficDescriptorServiceClass	read-write	mandatory	The service category for this traffic descriptor.
1.3.6.1.4.1.285.2.6.2.7.2.1.4	ColumntrafficDescriptorPcr01	read-write	mandatory	The Peak Cell Rate (in cells/second) for the CLP0+1 flow. The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.5	ColumntrafficDescriptorPcr0	read-write	mandatory	The Peak Cell Rate (in cells/second) for the CLP0 flow. The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.6	ColumntrafficDescriptorScr01	read-write	mandatory	The Sustainable Cell Rate (in cells/second) for the CLP0+1 flow. The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.7	ColumntrafficDescriptorScr0	read-write	mandatory	The Sustainable Cell Rate (in cells/second) for the CLP0 flow. The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.8	ColumntrafficDescriptorMbs01	read-write	mandatory	The Maximum Burst Size for the CLP0+1 flow. The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.9	ColumntrafficDescriptorMbs0	read-write	mandatory	The Maximum Burst Size for the CLP0 flow. The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.10	ColumntrafficDescriptorTaggingFlag	read-write	mandatory	Indicates if tagging is disabled or enabled.
1.3.6.1.4.1.285.2.6.2.7.2.1.11	ColumntrafficDescriptorFrameDiscardFlag	read-write	mandatory	Indicates if frame discard is enabled or disabled. This only has any effect if configTmControlEarlyPacketDiscardAdminStatus is up.
1.3.6.1.4.1.285.2.6.2.7.2.1.12	ColumntrafficDescriptorBestEffortFlag	read-write	mandatory	Indicates that best-effort delivery should be used (i.e. UBR service).
1.3.6.1.4.1.285.2.6.2.7.2.1.13	ColumntrafficDescriptorMcr	read-write	mandatory	The Minimum Cell Rate (in cells/second). The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.14	ColumntrafficDescriptorAbrIcr	read-write	mandatory	The Initial Cell Rate (in cells/second). The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.15	ColumntrafficDescriptorAbrTbe	read-write	mandatory	The Transient Buffer Exposure. The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.16	ColumntrafficDescriptorAbrFrtt	read-write	mandatory	The Fixed Round Trip time (in microseconds). The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.17	ColumntrafficDescriptorAbrRif	read-write	mandatory	The Rate Increase Factor. A value such as, for example, rifOneOver128 indicates a RIF value of 1/128.
1.3.6.1.4.1.285.2.6.2.7.2.1.18	ColumntrafficDescriptorAbrRdf	read-write	mandatory	The Rate Decrease Factor. A value such as, for example, rdfOneOver128 indicates a RIF value of 1/128.
1.3.6.1.4.1.285.2.6.2.7.2.1.19	ColumntrafficDescriptorAbrNrm	read-write	mandatory	The number of cells between each Resource Management (RM) cell. A value such as, for example, nrm32 indicates an Nrm value of 32.
1.3.6.1.4.1.285.2.6.2.7.2.1.20	ColumntrafficDescriptorAbrTrm	read-write	mandatory	The maximum time between each Resource Management (RM) cell. A value such as, for example, trm3Point125 indicates a Trm value of 3.125 milliseconds.
1.3.6.1.4.1.285.2.6.2.7.2.1.21	ColumntrafficDescriptorAbrCdf	read-write	mandatory	The Cutoff Decrease Factor. A value such as, for example, cdfOneOver16 indicates a CDF value of 1/16.
1.3.6.1.4.1.285.2.6.2.7.2.1.22	ColumntrafficDescriptorAbrAdtf	read-write	mandatory	The value (in centiseconds) of the ACR Decrease Time Factor.
1.3.6.1.4.1.285.2.6.2.7.2.1.23	ColumntrafficDescriptorTrafficType	read-only	mandatory	The traffic descriptor type. This value is identical to the last component of the object ID of the MIB objects in the atmfTrafficDescrTypes subtree of the ILMI…
1.3.6.1.4.1.285.2.6.2.7.2.1.24	ColumntrafficDescriptorRowStatus	read-write	mandatory	Used to control creation and deletion of new rows in the table.
1.3.6.1.4.1.285.2.6.2.7.2.1.25	ColumntrafficDescriptorCtd	read-write	mandatory	The Cell Transfer Delay (in microseconds). The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.26	ColumntrafficDescriptorCdv	read-write	mandatory	The Cell Delay Variation (in microseconds). The value -1 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.7.2.1.27	ColumntrafficDescriptorLogClr	read-write	mandatory	Minus the base 10 logarithm of the Cell Loss Ratio. The value 0 is used to indicate that this value is not used.
1.3.6.1.4.1.285.2.6.2.8	NodeconfigServiceReg
1.3.6.1.4.1.285.2.6.2.8.1	TableconfigIlmiServiceRegistryTable	not-accessible	mandatory	This table is used to configure the contents of the ILMI service registry on all ATM ports.
1.3.6.1.4.1.285.2.6.2.8.1.1	RowconfigIlmiServiceRegistryEntry	not-accessible	mandatory	Each row in this table describes one service provided by one service provider.
1.3.6.1.4.1.285.2.6.2.8.1.1.1	ColumnconfigIlmiServiceRegistryAddressIndex	read-only	mandatory	An arbitrary integer used to differentiate multiple rows containing different ATM addresses for the same service.
1.3.6.1.4.1.285.2.6.2.8.1.1.2	ColumnconfigIlmiServiceRegistryServiceId	read-write	mandatory	The service identifier which uniquely identifies the type of service at the address provided in the table. Legal values are given in the Service Registry MIB i…
1.3.6.1.4.1.285.2.6.2.8.1.1.3	ColumnconfigIlmiServiceRegistryAtmAddress	read-write	mandatory	The full ATM address of the service. The user-side IME may use this address to establish a connection with the service.
1.3.6.1.4.1.285.2.6.2.8.1.1.4	ColumnconfigIlmiServiceRegistryParm1	read-write	mandatory	An octet string whose size and meaning is determined by the value of configIlmiServiceRegistryServiceId.
1.3.6.1.4.1.285.2.6.2.8.1.1.5	ColumnconfigIlmiServiceRegistryRowStatus	read-write	mandatory	Used to control creation and deletion of new rows in the table.
1.3.6.1.4.1.285.2.6.2.9	NodeconfigSar
1.3.6.1.4.1.285.2.6.2.9.1	ScalarconfigSarMuxFillThreshold	read-write	mandatory	The number of cells in the SAR multiplexer FIFO that will cause the PHY to take priority over the SAR.
1.3.6.1.4.1.285.2.6.2.9.2	ScalarconfigSarMuxSarVpi	read-write	mandatory	The VPI used to distinguish cells on iPort 0 that are intended for the SAR.
1.3.6.1.4.1.285.2.6.2.9.3	ScalarconfigSarEmptyCellHandling	read-write	mandatory
1.3.6.1.4.1.285.2.6.2.10	NodeconfigXModule
1.3.6.1.4.1.285.2.6.2.10.1	TableconfigXModuleTable	not-accessible	mandatory	This table contains configuration information for the expansion modules.
1.3.6.1.4.1.285.2.6.2.10.1.1	RowconfigXModuleEntry	not-accessible	mandatory	Each row in this table contains information about one expansion module.
1.3.6.1.4.1.285.2.6.2.10.1.1.1	ColumnconfigXModuleSlotIndex	read-only	mandatory	The slot number for the expansion module. It is used to index the expansion module in the table.
1.3.6.1.4.1.285.2.6.2.10.1.1.2	ColumnconfigXModuleAdminStatus	read-write	mandatory	Enables, disables, or resets the expansion module.
1.3.6.1.4.1.285.2.6.2.11	NodeconfigFeatureModule
1.3.6.1.4.1.285.2.6.2.11.1	ScalarconfigFeatureModuleAdminStatus	read-write	mandatory	Enables or disables the feature module.
1.3.6.1.4.1.285.2.6.2.12	NodeconfigCommonEPort
1.3.6.1.4.1.285.2.6.2.12.1	ScalarconfigCommonEPortIlmiAdminStatus	read-write	mandatory	Enables or disables ILMI on an ATM port.
1.3.6.1.4.1.285.2.6.2.12.2	ScalarconfigCommonEPortAddrRegistrationAdminStatus	read-write	mandatory	Enables or disables the address registration protocol on an ATM port.
1.3.6.1.4.1.285.2.6.2.12.3	ScalarconfigCommonEPortMaxVpcs	read-write	mandatory	The maximum number of VPCs on an ATM port.
1.3.6.1.4.1.285.2.6.2.12.4	ScalarconfigCommonEPortMaxVccs	read-write	mandatory	The maximum number of VCCs on an ATM port.
1.3.6.1.4.1.285.2.6.2.12.5	ScalarconfigCommonEPortMaxVpiBits	read-write	mandatory	The number of bits used in a VPI on an ATM port.
1.3.6.1.4.1.285.2.6.2.12.6	ScalarconfigCommonEPortMaxVciBits	read-write	mandatory	The number of bits used in a VCI on an ATM port.
1.3.6.1.4.1.285.2.6.2.12.7	ScalarconfigCommonEPortUniType	read-write	mandatory	The UNI type on an ATM port.
1.3.6.1.4.1.285.2.6.2.12.8	ScalarconfigCommonEPortUniVersion	read-write	mandatory	The highest UNI version used on an ATM port.
1.3.6.1.4.1.285.2.6.2.12.9	ScalarconfigCommonEPortDeviceType	read-write	mandatory	The ATM port device type.
1.3.6.1.4.1.285.2.6.2.12.10	ScalarconfigCommonEPortIlmiVersion	read-write	mandatory	The highest ILMI version used on an ATM port.
1.3.6.1.4.1.285.2.6.2.12.11	ScalarconfigCommonEPortNniSigVersion	read-write	mandatory	The NNI signalling protocol used on an ATM port.
1.3.6.1.4.1.285.2.6.2.12.12	ScalarconfigCommonEPortSignallingVpi	read-write	mandatory	The VPI used for signalling.
1.3.6.1.4.1.285.2.6.2.12.13	ScalarconfigCommonEPortSignallingVci	read-write	mandatory	The VCI used for signalling.
1.3.6.1.4.1.285.2.6.2.12.14	ScalarconfigCommonEPortIlmiVpi	read-write	mandatory	The VPI used for ILMI.
1.3.6.1.4.1.285.2.6.2.12.15	ScalarconfigCommonEPortIlmiVci	read-write	mandatory	The VCI used for ILMI.
1.3.6.1.4.1.285.2.6.2.12.16	ScalarconfigCommonEPortLecsVpi	read-write	mandatory	The VPI used for LECS.
1.3.6.1.4.1.285.2.6.2.12.17	ScalarconfigCommonEPortLecsVci	read-write	mandatory	The VCI used for LECS.
1.3.6.1.4.1.285.2.6.2.12.18	ScalarconfigCommonEPortPnniVpi	read-write	mandatory	The VPI used for PNNI.
1.3.6.1.4.1.285.2.6.2.12.19	ScalarconfigCommonEPortPnniVci	read-write	mandatory	The VCI used for PNNI.
1.3.6.1.4.1.285.2.6.2.12.20	ScalarconfigCommonEPortAbrBandwidthAllocation	read-write	mandatory	The maximum percentage of the ATM link bandwidth that may be used for ABR traffic.
1.3.6.1.4.1.285.2.6.2.12.21	ScalarconfigCommonEPortVbrRtBandwidthAllocation	read-write	mandatory	The maximum percentage of the ATM link bandwidth that may be used for rt-VBR traffic.
1.3.6.1.4.1.285.2.6.2.12.22	ScalarconfigCommonEPortVbrNrtBandwidthAllocation	read-write	mandatory	The maximum percentage of the ATM link bandwidth that may be used for nrt-VBR traffic.
1.3.6.1.4.1.285.2.6.2.12.23	ScalarconfigCommonEPortCbrBandwidthAllocation	read-write	mandatory	The maximum percentage of the ATM link bandwidth that may be used for CBR traffic.
1.3.6.1.4.1.285.2.6.2.12.24	ScalarconfigStaticEPortIlmiPollFrequency	read-write	mandatory	Polling frequency in seconds for maintaining ILMI connectivity.
1.3.6.1.4.1.285.2.6.2.12.25	ScalarconfigStaticEPortIlmiPollRetries	read-write	mandatory	The number of retries before declaring a loss of ILMI connectivity.
1.3.6.1.4.1.285.2.6.2.12.26	ScalarconfigStaticEPortMaxTransientPhyFailureTime	read-write	mandatory	The maximum time in seconds where loss of signal or lack of rx sync is not considered a loss of PHY connectivity. A value of 0 indicates that failures will nev…
1.3.6.1.4.1.285.2.6.2.12.27	ScalarconfigStaticEPortMaxPhyFailuresPerMinute	read-write	deprecated	The maximum number of transient or non-transient PHY failures per minute before an ATM port is automatically disabled and an ePortAutoDisabled trap is generate…
1.3.6.1.4.1.285.2.6.2.12.28	ScalarconfigCommonEPortLinkDelay	read-write	mandatory	The expected transmission delay on the ATM link (in microseconds).
1.3.6.1.4.1.285.2.6.2.12.29	ScalarconfigCommonEPortTransientPhyOffTime	read-write	deprecated	The time (in seconds) that the PHY may be disconnected during configCommonEPortTransientPhyWindowTime before an ePortAutoDisabled trap is sent.
1.3.6.1.4.1.285.2.6.2.12.30	ScalarconfigCommonEPortTransientPhyWindowTime	read-write	deprecated	The duration (in seconds) of the window used for measuring PHY down time.
1.3.6.1.4.1.285.2.6.2.12.31	ScalarconfigCommonEPortTransientPhyDisconnectCount	read-write	mandatory	Number of PHY disconnects that may occur during configCommonEPortTransientPhyDisconnectTimer before an ePortAutoDisabled trap is sent.
1.3.6.1.4.1.285.2.6.2.12.32	ScalarconfigCommonEPortTransientPhyDisconnectTimer	read-write	mandatory	The duration (in seconds) of the time used for counting PHY disconnects.
1.3.6.1.4.1.285.2.6.2.12.33	ScalarconfigCommonEPortDefaultSigVersion	read-write	mandatory	The signalling version used if ILMI autoconfiguration is not possible.
1.3.6.1.4.1.285.2.6.2.12.34	ScalarconfigCommonEPortMaxSvpcVpi	read-write	mandatory	The maximum VPI that the signalling stack on the port is configured to support for allocation to SVPCs.
1.3.6.1.4.1.285.2.6.2.12.35	ScalarconfigCommonEPortMaxSvccVpi	read-write	mandatory	The maximum VPI that the signalling stack on the port is configured to support for allocation to SVCCs.
1.3.6.1.4.1.285.2.6.2.12.36	ScalarconfigCommonEPortMinSvccVci	read-write	mandatory	The minimum VCI that the signalling stack on the port is configured to support for allocation to SVCCs. The same value applies to all SVCC VPI values for which…
1.3.6.1.4.1.285.2.6.2.13	NodeconfigEPort
1.3.6.1.4.1.285.2.6.2.13.1	ScalarconfigEPortScratchPadScratchPadStatus	read-write	mandatory	Controls the copying of data between configEPortTable and the ePort scratch pad.
1.3.6.1.4.1.285.2.6.2.13.2	ScalarconfigEPortScratchPadEPortIndex	read-write	mandatory	Set to the row index in configEPortTable before the contents of the row are copied to the ePort scratch pad.
1.3.6.1.4.1.285.2.6.2.13.3	ScalarconfigEPortScratchPadIpAddress	read-only	mandatory	The IP address of the manager that uses the ePort scratch pad. Used as a lock.
1.3.6.1.4.1.285.2.6.2.13.4	ScalarconfigEPortScratchPadActionStatus	read-only	mandatory	The result of an attempt to copy between configEPortTable and the scratch pad.
1.3.6.1.4.1.285.2.6.2.13.5	ScalarconfigEPortScratchPadHwConfigTxClocking	read-write	mandatory	A copy of configEPortHwConfigTxClocking.
1.3.6.1.4.1.285.2.6.2.13.6	ScalarconfigEPortScratchPadHwConfigSonetSdh	read-write	mandatory	A copy of configEPortHwConfigSonetSdh.
1.3.6.1.4.1.285.2.6.2.13.7	ScalarconfigEPortScratchPadUseCommonEPortConfig	read-write	mandatory	A copy of configEPortUseCommonEPortConfig.
1.3.6.1.4.1.285.2.6.2.13.8	ScalarconfigEPortScratchPadLoopback	read-write	mandatory	A copy of configEPortLoopback.
1.3.6.1.4.1.285.2.6.2.13.9	ScalarconfigEPortScratchPadIlmiConfigIlmiAdminStatus	read-write	mandatory	A copy of configEPortIlmiConfigIlmiAdminStatus.
1.3.6.1.4.1.285.2.6.2.13.10	ScalarconfigEPortScratchPadIlmiConfigAddrRegistrationAdminStatus	read-write	mandatory	A copy of configEPortIlmiConfigAddrRegistrationAdminStatus.
1.3.6.1.4.1.285.2.6.2.13.11	ScalarconfigEPortScratchPadIlmiConfigMaxVpcs	read-write	mandatory	A copy of configEPortIlmiConfigMaxVpcs.
1.3.6.1.4.1.285.2.6.2.13.12	ScalarconfigEPortScratchPadIlmiConfigMaxVccs	read-write	mandatory	A copy of configEPortIlmiConfigMaxVccs.
1.3.6.1.4.1.285.2.6.2.13.13	ScalarconfigEPortScratchPadIlmiConfigMaxVpiBits	read-write	mandatory	A copy of configEPortIlmiConfigMaxVpiBits.
1.3.6.1.4.1.285.2.6.2.13.14	ScalarconfigEPortScratchPadIlmiConfigMaxVciBits	read-write	mandatory	A copy of configEPortIlmiConfigMaxVciBits.
1.3.6.1.4.1.285.2.6.2.13.15	ScalarconfigEPortScratchPadIlmiConfigUniType	read-write	mandatory	A copy of configEPortIlmiConfigUniType.
1.3.6.1.4.1.285.2.6.2.13.16	ScalarconfigEPortScratchPadIlmiConfigUniVersion	read-write	mandatory	A copy of configEPortIlmiConfigUniVersion.
1.3.6.1.4.1.285.2.6.2.13.17	ScalarconfigEPortScratchPadIlmiConfigDeviceType	read-write	mandatory	A copy of configEPortIlmiConfigDeviceType.
1.3.6.1.4.1.285.2.6.2.13.18	ScalarconfigEPortScratchPadIlmiConfigIlmiVersion	read-write	mandatory	A copy of configEPortIlmiConfigIlmiVersion.
1.3.6.1.4.1.285.2.6.2.13.19	ScalarconfigEPortScratchPadIlmiConfigNniSigVersion	read-write	mandatory	A copy of configEPortIlmiConfigNniSigVersion.
1.3.6.1.4.1.285.2.6.2.13.20	ScalarconfigEPortScratchPadIlmiConfigSignallingVpi	read-write	mandatory	A copy of configEPortIlmiConfigSignallingVpi.
1.3.6.1.4.1.285.2.6.2.13.21	ScalarconfigEPortScratchPadIlmiConfigSignallingVci	read-write	mandatory	A copy of configEPortIlmiConfigSignallingVci.
1.3.6.1.4.1.285.2.6.2.13.22	ScalarconfigEPortScratchPadIlmiConfigIlmiVpi	read-write	mandatory	A copy of configEPortIlmiConfigIlmiVpi.
1.3.6.1.4.1.285.2.6.2.13.23	ScalarconfigEPortScratchPadIlmiConfigIlmiVci	read-write	mandatory	A copy of configEPortIlmiConfigIlmiVci.
1.3.6.1.4.1.285.2.6.2.13.24	ScalarconfigEPortScratchPadIlmiConfigLecsVpi	read-write	mandatory	A copy of configEPortIlmiConfigLecsVpi.
1.3.6.1.4.1.285.2.6.2.13.25	ScalarconfigEPortScratchPadIlmiConfigLecsVci	read-write	mandatory	A copy of configEPortIlmiConfigLecsVci.
1.3.6.1.4.1.285.2.6.2.13.26	ScalarconfigEPortScratchPadIlmiConfigPnniVpi	read-write	mandatory	A copy of configEPortIlmiConfigPnniVpi.
1.3.6.1.4.1.285.2.6.2.13.27	ScalarconfigEPortScratchPadIlmiConfigPnniVci	read-write	mandatory	A copy of configEPortIlmiConfigPnniVci.
1.3.6.1.4.1.285.2.6.2.13.28	ScalarconfigEPortScratchPadAbrBandwidthAllocation	read-write	mandatory	A copy of configEPortAbrBandwidthAllocation.
1.3.6.1.4.1.285.2.6.2.13.29	ScalarconfigEPortScratchPadVbrRtBandwidthAllocation	read-write	mandatory	A copy of configEPortVbrRtBandwidthAllocation.
1.3.6.1.4.1.285.2.6.2.13.30	ScalarconfigEPortScratchPadVbrNrtBandwidthAllocation	read-write	mandatory	A copy of configEPortVbrNrtBandwidthAllocation.
1.3.6.1.4.1.285.2.6.2.13.31	ScalarconfigEPortScratchPadCbrBandwidthAllocation	read-write	mandatory	A copy of configEPortCbrBandwidthAllocation.
1.3.6.1.4.1.285.2.6.2.13.32	ScalarconfigEPortScratchPadLinkDelay	read-write	mandatory	A copy of configEPortLinkDelay.
1.3.6.1.4.1.285.2.6.2.13.33	ScalarconfigEPortScratchPadTransientPhyOffTime	read-write	deprecated	A copy of configEPortTransientPhyOffTime.
1.3.6.1.4.1.285.2.6.2.13.34	ScalarconfigEPortScratchPadTransientPhyWindowTime	read-write	deprecated	A copy of configEPortTransientPhyWindowTime.
1.3.6.1.4.1.285.2.6.2.13.35	ScalarconfigEPortScratchPadTransientPhyDisconnectCount	read-write	mandatory	A copy of configEPortTransientPhyDisconnectCount.
1.3.6.1.4.1.285.2.6.2.13.36	ScalarconfigEPortScratchPadTransientPhyDisconnectTimer	read-write	mandatory	A copy of configEPortTransientPhyDisconnectTimer.
1.3.6.1.4.1.285.2.6.2.13.37	ScalarconfigEPortScratchPadBandwidthLimit	read-write	mandatory	A copy of configEPortBandwidthLimit.
1.3.6.1.4.1.285.2.6.2.13.38	TableconfigEPortTable	not-accessible	mandatory	This table contains configuration for each ATM port (ePort) in the switch. The table may be modified through the ePort scratch pad.
1.3.6.1.4.1.285.2.6.2.13.38.1	RowconfigEPortEntry	not-accessible	mandatory	Each row in this table describes one ATM port (ePort).
1.3.6.1.4.1.285.2.6.2.13.38.1.1	ColumnconfigEPortIfIndex	read-only	mandatory	The ifIndex of the ATM port described by this row.
1.3.6.1.4.1.285.2.6.2.13.38.1.2	ColumnconfigEPortHwConfigTxClocking	read-only	mandatory	The clocking source for this ATM port. This setting is disregarded if this port is configured to receive the master clock from the network.
1.3.6.1.4.1.285.2.6.2.13.38.1.3	ColumnconfigEPortHwConfigSonetSdh	read-only	mandatory	The cell framing used on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.4	ColumnconfigEPortUseCommonEPortConfig	read-only	mandatory	Indicates if this ATM port should use the common ePort configuration (found in the configCommonEPort MIB subtree) or its own configuration.
1.3.6.1.4.1.285.2.6.2.13.38.1.5	ColumnconfigEPortLoopback	read-only	mandatory	The hardware loopback type on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.6	ColumnconfigEPortIlmiConfigIlmiAdminStatus	read-only	mandatory	Enables or disables ILMI on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.7	ColumnconfigEPortIlmiConfigAddrRegistrationAdminStatus	read-only	mandatory	Enables or disables the address registration protocol on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.8	ColumnconfigEPortIlmiConfigMaxVpcs	read-only	mandatory	The maximum number of VPCs on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.9	ColumnconfigEPortIlmiConfigMaxVccs	read-only	mandatory	The maximum number of VCCs on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.10	ColumnconfigEPortIlmiConfigMaxVpiBits	read-only	mandatory	The number of bits used in a VPI on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.11	ColumnconfigEPortIlmiConfigMaxVciBits	read-only	mandatory	The number of bits used in a VCI on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.12	ColumnconfigEPortIlmiConfigUniType	read-only	mandatory	The UNI type on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.13	ColumnconfigEPortIlmiConfigUniVersion	read-only	mandatory	The highest UNI version used on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.14	ColumnconfigEPortIlmiConfigDeviceType	read-only	mandatory	The ATM port device type.
1.3.6.1.4.1.285.2.6.2.13.38.1.15	ColumnconfigEPortIlmiConfigIlmiVersion	read-only	mandatory	The highest ILMI version used on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.16	ColumnconfigEPortIlmiConfigNniSigVersion	read-only	mandatory	The NNI signalling protocol used on this ATM port.
1.3.6.1.4.1.285.2.6.2.13.38.1.17	ColumnconfigEPortIlmiConfigSignallingVpi	read-only	mandatory	The VPI used for signalling.
1.3.6.1.4.1.285.2.6.2.13.38.1.18	ColumnconfigEPortIlmiConfigSignallingVci	read-only	mandatory	The VCI used for signalling.
1.3.6.1.4.1.285.2.6.2.13.38.1.19	ColumnconfigEPortIlmiConfigIlmiVpi	read-only	mandatory	The VPI used for ILMI.
1.3.6.1.4.1.285.2.6.2.13.38.1.20	ColumnconfigEPortIlmiConfigIlmiVci	read-only	mandatory	The VCI used for ILMI.
1.3.6.1.4.1.285.2.6.2.13.38.1.21	ColumnconfigEPortIlmiConfigLecsVpi	read-only	mandatory	The VPI used for LECS.
1.3.6.1.4.1.285.2.6.2.13.38.1.22	ColumnconfigEPortIlmiConfigLecsVci	read-only	mandatory	The VCI used for LECS.
1.3.6.1.4.1.285.2.6.2.13.38.1.23	ColumnconfigEPortIlmiConfigPnniVpi	read-only	mandatory	The VPI used for PNNI.
1.3.6.1.4.1.285.2.6.2.13.38.1.24	ColumnconfigEPortIlmiConfigPnniVci	read-only	mandatory	The VCI used for PNNI.
1.3.6.1.4.1.285.2.6.2.13.38.1.25	ColumnconfigEPortAbrBandwidthAllocation	read-only	mandatory	The maximum percentage of the ATM link bandwidth that may be used for ABR traffic.
1.3.6.1.4.1.285.2.6.2.13.38.1.26	ColumnconfigEPortVbrRtBandwidthAllocation	read-only	mandatory	The maximum percentage of the ATM link bandwidth that may be used for rt-VBR traffic.
1.3.6.1.4.1.285.2.6.2.13.38.1.27	ColumnconfigEPortVbrNrtBandwidthAllocation	read-only	mandatory	The maximum percentage of the ATM link bandwidth that may be used for nrt-VBR traffic.
1.3.6.1.4.1.285.2.6.2.13.38.1.28	ColumnconfigEPortCbrBandwidthAllocation	read-only	mandatory	The maximum percentage of the ATM link bandwidth that may be used for CBR traffic.
1.3.6.1.4.1.285.2.6.2.13.38.1.29	ColumnconfigEPortLinkDelay	read-only	mandatory	The expected transmission delay on the ATM link (in microseconds).
1.3.6.1.4.1.285.2.6.2.13.38.1.30	ColumnconfigEPortTransientPhyOffTime	read-only	deprecated	The time (in seconds) that the PHY may be disconnected during configEPortTransientPhyWindowTime before an ePortAutoDisabled trap is sent.
1.3.6.1.4.1.285.2.6.2.13.38.1.31	ColumnconfigEPortTransientPhyWindowTime	read-only	deprecated	The duration (in seconds) of the window used for measuring PHY down time.
1.3.6.1.4.1.285.2.6.2.13.38.1.32	ColumnconfigEPortTransientPhyDisconnectCount	read-only	mandatory	Number of PHY disconnects that may occur during configEPortTransientPhyDisconnectTimer before an ePortAutoDisabled trap is sent.
1.3.6.1.4.1.285.2.6.2.13.38.1.33	ColumnconfigEPortTransientPhyDisconnectTimer	read-only	mandatory	The duration (in seconds) of the time used for counting PHY disconnects.
1.3.6.1.4.1.285.2.6.2.13.38.1.34	ColumnconfigEPortBandwidthLimit	read-only	mandatory	The maximum total bandwidth that may be used on this ATM port (in cells/seconds). A value of -1 indicates that the full link rate may be used.
1.3.6.1.4.1.285.2.6.2.13.38.1.35	ColumnconfigEPortDefaultSigVersion	read-only	mandatory	The signalling version used if ILMI autoconfiguration is not possible.
1.3.6.1.4.1.285.2.6.2.13.38.1.36	ColumnconfigEPortIlmiConfigMaxSvpcVpi	read-only	mandatory	The maximum VPI that the signalling stack on the port is configured to support for allocation to SVPCs.
1.3.6.1.4.1.285.2.6.2.13.38.1.37	ColumnconfigEPortIlmiConfigMaxSvccVpi	read-only	mandatory	The maximum VPI that the signalling stack on the port is configured to support for allocation to SVCCs.
1.3.6.1.4.1.285.2.6.2.13.38.1.38	ColumnconfigEPortIlmiConfigMinSvccVci	read-only	mandatory	The minimum VCI that the signalling stack on the port is configured to support for allocation to SVCCs. The same value applies to all SVCC VPI values for which…
1.3.6.1.4.1.285.2.6.2.13.39	ScalarconfigEPortScratchPadDefaultSigVersion	read-write	mandatory	A copy of configEPortDefaultSigVersion.
1.3.6.1.4.1.285.2.6.2.13.40	ScalarconfigEPortScratchPadIlmiConfigMaxSvpcVpi	read-write	mandatory	A copy of configEPortIlmiConfigMaxSvpcVpi.
1.3.6.1.4.1.285.2.6.2.13.41	ScalarconfigEPortScratchPadIlmiConfigMaxSvccVpi	read-write	mandatory	A copy of configEPortIlmiConfigMaxSvccVpi.
1.3.6.1.4.1.285.2.6.2.13.42	ScalarconfigEPortScratchPadIlmiConfigMinSvccVci	read-write	mandatory	A copy of configEPortIlmiConfigMinSvccVci.
1.3.6.1.4.1.285.2.6.2.14	NodeconfigCpuQ
1.3.6.1.4.1.285.2.6.2.14.1	ScalarconfigCpuPortCpuQueueSize	read-write	mandatory	The maximum size of the switch processor queue. This must be an number of the form 255+256*N, where N is an integer.
1.3.6.1.4.1.285.2.6.2.14.2	ScalarconfigCpuPortResetQueueSize	read-write	mandatory	The maximum size of the reset queue. This must be an number of the form 255+256*N, where N is an integer.
1.3.6.1.4.1.285.2.6.2.15	NodeconfigCommonIPort
1.3.6.1.4.1.285.2.6.2.15.1	TableconfigCommonIPortQueueTable	not-accessible	mandatory	This table contains configuration data for the four queues associated with each iPort.
1.3.6.1.4.1.285.2.6.2.15.1.1	RowconfigCommonIPortQueueEntry	not-accessible	mandatory	Each row in this table contains data for one queue, but common to all iPorts.
1.3.6.1.4.1.285.2.6.2.15.1.1.1	ColumnconfigCommonIPortQueueIndex	read-only	mandatory	The queue number.
1.3.6.1.4.1.285.2.6.2.15.1.1.2	ColumnconfigCommonIPortEfciTaggingAdminStatus	read-write	mandatory	Enables or disables Explicit Forward Congestion Indication (EFCI) on a queue.
1.3.6.1.4.1.285.2.6.2.15.1.1.3	ColumnconfigCommonIPortClpDiscardAdminStatus	read-write	mandatory	Enables or disables discarding of CLP=1 cells on a queue.
1.3.6.1.4.1.285.2.6.2.15.1.1.4	ColumnconfigCommonIPortEfciTaggingThreshold	read-write	mandatory	The queue length threshold beyond which cells in the queue are tagged with EFCI. The threshold is given as a fraction of the maximum queue length.
1.3.6.1.4.1.285.2.6.2.15.1.1.5	ColumnconfigCommonIPortClpDiscardThreshold	read-write	mandatory	The queue length threshold beyond which CLP=1 cells are dropped rather than added to the queue. The threshold is given as a fraction of the maximum queue lengt…
1.3.6.1.4.1.285.2.6.2.15.1.1.6	ColumnconfigCommonIPortQueueSize	read-write	mandatory	The maximum queue size. This must be an number of the form 255+256*N, where N is an integer.
1.3.6.1.4.1.285.2.6.2.15.1.1.7	ColumnconfigCommonIPortLogClr	read-write	mandatory	The worst expected Cell Loss Ratio for this queue. The number is expressed as minus the base 10 logarithm of the Cell Loss Ratio.
1.3.6.1.4.1.285.2.6.2.15.1.1.8	ColumnconfigCommonIPortCdv	read-write	mandatory	The worst expected Cell Delay Variation (in microseconds) for this queue.
1.3.6.1.4.1.285.2.6.2.16	NodeconfigIPort
1.3.6.1.4.1.285.2.6.2.16.1	ScalarconfigIPortScratchPadScratchPadStatus	read-write	mandatory	Controls the copying of data between configIPort(Queue)Table and the iPort scratch pad.
1.3.6.1.4.1.285.2.6.2.16.2	ScalarconfigIPortScratchPadSlotIndex	read-write	mandatory	Set to the expansion module number in configIPort(Queue)Table before the contents of the row are copied to the iPort scratch pad.
1.3.6.1.4.1.285.2.6.2.16.3	ScalarconfigIPortScratchPadIPortRIndex	read-write	mandatory	Set to the iPort number in configIPort(Queue)Table before the contents of the row are copied to the iPort scratch pad.
1.3.6.1.4.1.285.2.6.2.16.4	ScalarconfigIPortScratchPadIpAddress	read-only	mandatory	The IP address of the manager that uses the iPort scratch pad. Used as a lock.
1.3.6.1.4.1.285.2.6.2.16.5	ScalarconfigIPortScratchPadActionStatus	read-only	mandatory	The result of an attempt to copy between configEPortTable and the scratch pad.
1.3.6.1.4.1.285.2.6.2.16.6	ScalarconfigIPortScratchPadUseCommonIPortConfig	read-write	mandatory	A copy of configIPortUseCommonIPortConfig.
1.3.6.1.4.1.285.2.6.2.16.7	TableconfigIPortScratchPadQueueTable	not-accessible	mandatory	A copy of configIPortQueueTable for one iPort.
1.3.6.1.4.1.285.2.6.2.16.7.1	RowconfigIPortScratchPadQueueEntry	not-accessible	mandatory	Each row in this table describes one queue for one iPort.
1.3.6.1.4.1.285.2.6.2.16.7.1.1	ColumnconfigIPortScratchPadQueueQueueIndex	read-only	mandatory	A copy of configIPortQueueSlotIndex.
1.3.6.1.4.1.285.2.6.2.16.7.1.2	ColumnconfigIPortScratchPadQueueEfciTaggingAdminStatus	read-write	mandatory	A copy of configIPortQueueEfciTaggingAdminStatus.
1.3.6.1.4.1.285.2.6.2.16.7.1.3	ColumnconfigIPortScratchPadQueueClpDiscardAdminStatus	read-write	mandatory	A copy of configIPortQueueClpDiscardAdminStatus.
1.3.6.1.4.1.285.2.6.2.16.7.1.4	ColumnconfigIPortScratchPadQueueEfciTaggingThreshold	read-write	mandatory	A copy of configIPortQueueEfciTaggingThreshold.
1.3.6.1.4.1.285.2.6.2.16.7.1.5	ColumnconfigIPortScratchPadQueueClpDiscardThreshold	read-write	mandatory	A copy of configIPortQueueClpDiscardThreshold.
1.3.6.1.4.1.285.2.6.2.16.7.1.6	ColumnconfigIPortScratchPadQueueSize	read-write	mandatory	A copy of configIPortQueueSize.
1.3.6.1.4.1.285.2.6.2.16.7.1.7	ColumnconfigIPortScratchPadQueueLogClr	read-write	mandatory	A copy of configIPortQueueLogClr.
1.3.6.1.4.1.285.2.6.2.16.7.1.8	ColumnconfigIPortScratchPadQueueCdv	read-write	mandatory	A copy of configIPortQueueCdv.
1.3.6.1.4.1.285.2.6.2.16.8	TableconfigIPortTable	not-accessible	mandatory	This table contains configuration for each Core Access Point (iPort) in the switch. The table may be modified through the iPort scratch pad.
1.3.6.1.4.1.285.2.6.2.16.8.1	RowconfigIPortEntry	not-accessible	mandatory	Each row in this table describes one Core Access Point (iPort).
1.3.6.1.4.1.285.2.6.2.16.8.1.1	ColumnconfigIPortSlotIndex	read-only	mandatory	The number of the expansion module to which the iPort is connected.
1.3.6.1.4.1.285.2.6.2.16.8.1.2	ColumnconfigIPortRIndex	read-only	mandatory	The number of the iPort within the expansion module.
1.3.6.1.4.1.285.2.6.2.16.8.1.3	ColumnconfigIPortUseCommonIPortConfig	read-only	mandatory	Indicates if this iPort should use the common iPort configuration (found in the configCommonIPort MIB subtree) or its own configuration.
1.3.6.1.4.1.285.2.6.2.16.9	TableconfigIPortQueueTable	not-accessible	mandatory	This table contains configuration for each queue. The table may be modified through the iPort scratch pad.
1.3.6.1.4.1.285.2.6.2.16.9.1	RowconfigIPortQueueEntry	not-accessible	mandatory	Each row in this table describes one queue.
1.3.6.1.4.1.285.2.6.2.16.9.1.1	ColumnconfigIPortQueueSlotIndex	read-only	mandatory	The number of the expansion module to which the iPort for this queue is connected.
1.3.6.1.4.1.285.2.6.2.16.9.1.2	ColumnconfigIPortQueueRIndex	read-only	mandatory	The number of the iPort within the expansion module.
1.3.6.1.4.1.285.2.6.2.16.9.1.3	ColumnconfigIPortQueueQueueIndex	read-only	mandatory	The queue priority.
1.3.6.1.4.1.285.2.6.2.16.9.1.4	ColumnconfigIPortQueueEfciTaggingAdminStatus	read-only	mandatory	Enables or disables Explicit Forward Congestion Indication (EFCI) on this queue.
1.3.6.1.4.1.285.2.6.2.16.9.1.5	ColumnconfigIPortQueueClpDiscardAdminStatus	read-only	mandatory	Enables or disables discarding of CLP=1 cells on this queue.
1.3.6.1.4.1.285.2.6.2.16.9.1.6	ColumnconfigIPortQueueEfciTaggingThreshold	read-only	mandatory	The queue length threshold beyond which cells in the queue are tagged with EFCI. The threshold is given as a fraction of the maximum queue length.
1.3.6.1.4.1.285.2.6.2.16.9.1.7	ColumnconfigIPortQueueClpDiscardThreshold	read-only	mandatory	The queue length threshold beyond which CLP=1 cells are dropped rather than added to the queue. The threshold is given as a fraction of the maximum queue lengt…
1.3.6.1.4.1.285.2.6.2.16.9.1.8	ColumnconfigIPortQueueSize	read-only	mandatory	The maximum queue size. This must be an number of the form 255+256*N, where N is an integer.
1.3.6.1.4.1.285.2.6.2.16.9.1.9	ColumnconfigIPortQueueLogClr	read-write	mandatory	The worst expected Cell Loss Ratio for this queue. The number is expressed as minus the base 10 logarithm of the Cell Loss Ratio.
1.3.6.1.4.1.285.2.6.2.16.9.1.10	ColumnconfigIPortQueueCdv	read-write	mandatory	The worst expected Cell Delay Variation (in microseconds) for this queue.
1.3.6.1.4.1.285.2.6.2.17	NodeconfigPvpPvc
1.3.6.1.4.1.285.2.6.2.17.1	ScalarpvpSetupTableNextIndex	read-only	mandatory	The next unused row in pvpSetupTable.
1.3.6.1.4.1.285.2.6.2.17.2	TablepvpSetupTable	not-accessible	mandatory	This table contains all Permanent Virtual Paths (PVPs) in the switch.
1.3.6.1.4.1.285.2.6.2.17.2.1	RowpvpSetupEntry	not-accessible	mandatory	Each row in this table describes one PVP. PVPs typically connect two ATM ports. The numerically lowest of these is called the 'low' port, and the numerically h…
1.3.6.1.4.1.285.2.6.2.17.2.1.1	ColumnpvpSetupIndex	read-only	mandatory	An arbitrary integer used to differentiate multiple rows in the table.
1.3.6.1.4.1.285.2.6.2.17.2.1.2	ColumnpvpSetupApplication	read-write	mandatory	The PVP type. The value 'transitVp' indicates a PVP that passes through the switch and has high and low end configuration. The value 'softPvpOriginatorVpl' ind…
1.3.6.1.4.1.285.2.6.2.17.2.1.3	ColumnpvpSetupLowEPortIndex	read-write	mandatory	The ifIndex of the low port connected to this PVP.
1.3.6.1.4.1.285.2.6.2.17.2.1.4	ColumnpvpSetupLowVpi	read-write	mandatory	The VPI used at the low end of the PVP.
1.3.6.1.4.1.285.2.6.2.17.2.1.5	ColumnpvpSetupHighEPortIndex	read-write	mandatory	The ifIndex of the high port connected to this PVP.
1.3.6.1.4.1.285.2.6.2.17.2.1.6	ColumnpvpSetupHighVpi	read-write	mandatory	The VPI used at the high end of the PVP.
1.3.6.1.4.1.285.2.6.2.17.2.1.7	ColumnpvpSetupVpCrossConnectIndex	read-only	mandatory	After the PVP has been created, this is the index into the atmVpCrossConnectTable in the ATM MIB.
1.3.6.1.4.1.285.2.6.2.17.2.1.8	ColumnpvpSetupL2HTrafficDescriptorIndex	read-write	mandatory	The index into the trafficDescriptorTable for the traffic descriptor used in the direction low-to-high.
1.3.6.1.4.1.285.2.6.2.17.2.1.9	ColumnpvpSetupH2LTrafficDescriptorIndex	read-write	mandatory	The index into the trafficDescriptorTable for the traffic descriptor used in the direction high-to-low.
1.3.6.1.4.1.285.2.6.2.17.2.1.10	ColumnpvpSetupRowStatus	read-write	mandatory	Used to control creation and deletion of new rows in the table.
1.3.6.1.4.1.285.2.6.2.17.3	ScalarpvcSetupTableNextIndex	read-only	mandatory	The next unused row in pvcSetupTable.
1.3.6.1.4.1.285.2.6.2.17.4	TablepvcSetupTable	not-accessible	mandatory	This table contains all Permanent Virtual Channels (PVCs) in the switch.
1.3.6.1.4.1.285.2.6.2.17.4.1	RowpvcSetupEntry	not-accessible	mandatory	Each row in this table describes one PVC. PVCs typically connect two ATM ports. The numerically lowest of these is called the 'low' port, and the numerically h…
1.3.6.1.4.1.285.2.6.2.17.4.1.1	ColumnpvcSetupIndex	read-only	mandatory	An arbitrary integer used to differentiate multiple rows in the table.
1.3.6.1.4.1.285.2.6.2.17.4.1.2	ColumnpvcSetupApplication	read-write	mandatory	The PVC type. The value 'transitVc' indicates a PVC that passes through the switch and has high and low end configuration. The other values indicate a PVP that…
1.3.6.1.4.1.285.2.6.2.17.4.1.3	ColumnpvcSetupLowEPortIndex	read-write	mandatory	The ifIndex of the low port connected to this PVC.
1.3.6.1.4.1.285.2.6.2.17.4.1.4	ColumnpvcSetupLowVpi	read-write	mandatory	The VPI used at the low end of the PVC.
1.3.6.1.4.1.285.2.6.2.17.4.1.5	ColumnpvcSetupLowVci	read-write	mandatory	The VCI used at the low end of the PVC.
1.3.6.1.4.1.285.2.6.2.17.4.1.6	ColumnpvcSetupHighEPortIndex	read-write	mandatory	The ifIndex of the high port connected to this PVC.
1.3.6.1.4.1.285.2.6.2.17.4.1.7	ColumnpvcSetupHighVpi	read-write	mandatory	The VPI used at the high end of the PVC.
1.3.6.1.4.1.285.2.6.2.17.4.1.8	ColumnpvcSetupHighVci	read-write	mandatory	The VCI used at the high end of the PVC.
1.3.6.1.4.1.285.2.6.2.17.4.1.9	ColumnpvcSetupVcCrossConnectIndex	read-only	mandatory	After the PVC has been created, this is the index into the atmVcCrossConnectTable in the ATM MIB.
1.3.6.1.4.1.285.2.6.2.17.4.1.10	ColumnpvcSetupL2HTrafficDescriptorIndex	read-write	mandatory	The index into the trafficDescriptorTable for the traffic descriptor used in the direction low-to-high.
1.3.6.1.4.1.285.2.6.2.17.4.1.11	ColumnpvcSetupH2LTrafficDescriptorIndex	read-write	mandatory	The index into the trafficDescriptorTable for the traffic descriptor used in the direction high-to-low.
1.3.6.1.4.1.285.2.6.2.17.4.1.12	ColumnpvcSetupRowStatus	read-write	mandatory	Used to control creation and deletion of new rows in the table.
1.3.6.1.4.1.285.2.6.2.18	NodeconfigSvpSvc
1.3.6.1.4.1.285.2.6.2.18.1	ScalarsvpSetupTableNextIndex	read-only	mandatory	The next unused row in svpSetupTable.
1.3.6.1.4.1.285.2.6.2.18.2	TablesvpSetupTable	not-accessible	mandatory	This table contains all Soft Virtual Paths (SVPs) in the switch.
1.3.6.1.4.1.285.2.6.2.18.2.1	RowsvpSetupEntry	not-accessible	mandatory	Each row in this table describes one SVP.
1.3.6.1.4.1.285.2.6.2.18.2.1.1	ColumnsvpSetupIndex	read-only	mandatory	An arbitrary integer used to differentiate multiple rows in the table.
1.3.6.1.4.1.285.2.6.2.18.2.1.2	ColumnsvpSetupApplication	read-only	mandatory	The SVP type. Only one type (tunnel) is currently available.
1.3.6.1.4.1.285.2.6.2.18.2.1.3	ColumnsvpSetupEPortIndex	read-write	mandatory	The ifIndex of the ATM port connected to this SVP.
1.3.6.1.4.1.285.2.6.2.18.2.1.4	ColumnsvpSetupPreferredVpi	read-write	mandatory	The preferred VPI number to use on the ATM port given in svpSetupEPortIndex.
1.3.6.1.4.1.285.2.6.2.18.2.1.5	ColumnsvpSetupTermAtmAddr	read-write	mandatory	The ATM address to which the SVP should be connected.
1.3.6.1.4.1.285.2.6.2.18.2.1.6	ColumnsvpSetupVpCrossConnectIndex	read-only	mandatory	After the SVP has been created, this is the index into the atmVpCrossConnectTable in the ATM MIB.
1.3.6.1.4.1.285.2.6.2.18.2.1.7	ColumnsvpSetupTxTrafficDescriptorIndex	read-write	mandatory	The index into the trafficDescriptorTable for the traffic descriptor used in the direction svpSetupEPortIndex-to-svpSetupTermAtmAddr.
1.3.6.1.4.1.285.2.6.2.18.2.1.8	ColumnsvpSetupRxTrafficDescriptorIndex	read-write	mandatory	The index into the trafficDescriptorTable for the traffic descriptor used in the direction svpSetupTermAtmAddr-to-svpSetupEPortIndex.
1.3.6.1.4.1.285.2.6.2.18.2.1.9	ColumnsvpSetupRowStatus	read-write	mandatory	Used to control creation and deletion of new rows in the table.
1.3.6.1.4.1.285.2.6.2.18.3	ScalarsvcSetupTableNextIndex	read-only	mandatory	The next unused row in svcSetupTable.
1.3.6.1.4.1.285.2.6.2.18.4	TablesvcSetupTable	not-accessible	mandatory	This table contains all Soft Virtual Channels (SVCs) in the switch.
1.3.6.1.4.1.285.2.6.2.18.4.1	RowsvcSetupEntry	not-accessible	mandatory	Each row in this table describes one SVC.
1.3.6.1.4.1.285.2.6.2.18.4.1.1	ColumnsvcSetupIndex	read-only	mandatory	An arbitrary integer used to differentiate multiple rows in the table.
1.3.6.1.4.1.285.2.6.2.18.4.1.2	ColumnsvcSetupApplication	read-only	mandatory	The SVC type. The following values exist: classicalIpArpSrv The SVC connects the classical IP ARP server with the specified ATM address. lecsConfigDirectSvc Th…
1.3.6.1.4.1.285.2.6.2.18.4.1.3	ColumnsvcSetupTermAtmAddr	read-write	mandatory	The ATM address to which the SVC should be connected.
1.3.6.1.4.1.285.2.6.2.18.4.1.4	ColumnsvcSetupVcCrossConnectIndex	read-only	mandatory	After the SVC has been created, this is the index into the atmVpCrossConnectTable in the ATM MIB.
1.3.6.1.4.1.285.2.6.2.18.4.1.5	ColumnsvcSetupTxTrafficDescriptorIndex	read-write	mandatory	The index into the trafficDescriptorTable for the traffic descriptor used in the direction switch-to-svcSetupTermAtmAddr.
1.3.6.1.4.1.285.2.6.2.18.4.1.6	ColumnsvcSetupRxTrafficDescriptorIndex	read-write	mandatory	The index into the trafficDescriptorTable for the traffic descriptor used in the direction svcSetupTermAtmAddr-to-switch.
1.3.6.1.4.1.285.2.6.2.18.4.1.7	ColumnsvcSetupRowStatus	read-write	mandatory	Used to control creation and deletion of new rows in the table.
1.3.6.1.4.1.285.2.6.2.19	NodeconfigCommonSignalling
1.3.6.1.4.1.285.2.6.2.19.1	ScalarconfigCommonSignallingMaxTunnels	read-write	mandatory	The maximum number of additional signalling and SSCOP incarnations needed to service tunnels.
1.3.6.1.4.1.285.2.6.2.19.2	ScalarconfigCommonSignallingMaxSaps	read-write	mandatory	The maximum number of SAPs (logical users) supported by the signalling subsystem. This value must be at least the number of ATM ports present plus the number o…
1.3.6.1.4.1.285.2.6.2.19.3	ScalarconfigCommonSignallingMaxPvcs	read-write	obsolete	The maximum number of simultaneously active PVCs (connections) in the entire switch.
1.3.6.1.4.1.285.2.6.2.19.4	ScalarconfigCommonSignallingMaxSvcs	read-write	mandatory	The maximum number of simultaneously active SVCs (calls/connections) signalling instances in the entire switch. Note that each call/connection through the swit…
1.3.6.1.4.1.285.2.6.2.19.5	ScalarconfigCommonSignallingMaxConManStevs	read-write	obsolete	The maximum number of Connection Manager state-event machines, i.e. the maximum number of SVC+PVC calls/connections being processed simultaneously.
1.3.6.1.4.1.285.2.6.2.19.6	ScalarconfigCommonSignallingMaxSigProtStevs	read-write	mandatory	The maximum number SVC calls/connections setup or clear operations that can be processed concurrently in the entire switch. Actually twice this number of call …
1.3.6.1.4.1.285.2.6.2.19.7	ScalarconfigCommonSignallingT301	read-write	mandatory	The maximum time (in seconds) to wait for CONNECT after receiving ALERTING. Should be at least 3 minutes (180 seconds).
1.3.6.1.4.1.285.2.6.2.19.8	ScalarconfigCommonSignallingT302	read-write	mandatory	For N-ISDN interworking. Currently not used.
1.3.6.1.4.1.285.2.6.2.19.9	ScalarconfigCommonSignallingT303	read-write	mandatory	The maximum time (in seconds) to wait for response to SETUP (i.e. CALL-PROCEEDING, ALERTING or CONNECT).
1.3.6.1.4.1.285.2.6.2.19.10	ScalarconfigCommonSignallingT304	read-write	mandatory	For N-ISDN interworking. Currently not used.
1.3.6.1.4.1.285.2.6.2.19.11	ScalarconfigCommonSignallingT306	read-write	mandatory	For N-ISDN interworking. Currently not used.
1.3.6.1.4.1.285.2.6.2.19.12	ScalarconfigCommonSignallingT308	read-write	mandatory	The maximum time to wait for response to RELEASE.
1.3.6.1.4.1.285.2.6.2.19.13	ScalarconfigCommonSignallingT309	read-write	mandatory	The maximum time (in seconds) allowing SAAL (SSCOP) connection loss. If SSCOP experiences connection loss for longer than this time for a signalling connection…
1.3.6.1.4.1.285.2.6.2.19.14	ScalarconfigCommonSignallingT310	read-write	mandatory	The maximum time (in seconds) to wait for response to SETUP (i.e. ALERTING or CONNECT) after receiving CALL PROCEEDING.
1.3.6.1.4.1.285.2.6.2.19.15	ScalarconfigCommonSignallingT313	read-write	mandatory	The maximum time (in seconds) to wait for response to CONNECT.
1.3.6.1.4.1.285.2.6.2.19.16	ScalarconfigCommonSignallingT316	read-write	mandatory	The maximum time (in seconds) to wait for response to RESTART.
1.3.6.1.4.1.285.2.6.2.19.17	ScalarconfigCommonSignallingT317	read-write	mandatory	The maximum time (in seconds) to act on RESTART. Should be less than configCommonSignallingT316.
1.3.6.1.4.1.285.2.6.2.19.18	ScalarconfigCommonSignallingT322	read-write	mandatory	The maximum time (in seconds) to wait for response to STATUS ENQUIRY.
1.3.6.1.4.1.285.2.6.2.19.19	ScalarconfigCommonSignallingT331	read-write	mandatory	For Leaf Initiated Join support: The maximum time (in seconds) to wait for response to LEAF SETUP REQUEST.
1.3.6.1.4.1.285.2.6.2.19.20	ScalarconfigCommonSignallingT333	read-write	obsolete	This timer value is no longer used. Was removed from final UNI4.0 signalling specification.
1.3.6.1.4.1.285.2.6.2.19.21	ScalarconfigCommonSignallingT397	read-write	mandatory	The maximum time (in seconds) to wait for ADD PARTY ACK after receiving ALERTING or ADD PARTY ALERTED. Should be minimum 3 minutes (180 seconds). Note: Should …
1.3.6.1.4.1.285.2.6.2.19.22	ScalarconfigCommonSignallingT398	read-write	mandatory	For point-to-multipoint support: The maximum time (in seconds) to wait for response to DROP PARTY.
1.3.6.1.4.1.285.2.6.2.19.23	ScalarconfigCommonSignallingT399	read-write	mandatory	For point-to-multipoint support: The maximum time (in seconds) to wait for response to ADD PARTY.
1.3.6.1.4.1.285.2.6.2.19.24	ScalarconfigCommonSignallingPtmpMaxLeafs	read-write	mandatory	The maximum number of simultaneously active point-to-multipoint SVC leaf connection signalling instances (in the entire switch). Note that each leaf connection…
1.3.6.1.4.1.285.2.6.2.19.25	ScalarconfigCommonSignallingPtmpMaxLeafOperations	read-write	mandatory	The maximum number of signalling pt-to-mpt SVC leaf add or drop operations that can be processed concurrently in the entire switch. Actually twice this number …
1.3.6.1.4.1.285.2.6.2.19.26	ScalarconfigCommonSignallingPtmpMaxLeafsDropByClear	read-write	mandatory	The maximum number of concurrent leaf drop operations (for a single pt-to-mpt connection) when initiated by call clearing.
1.3.6.1.4.1.285.2.6.2.19.27	ScalarconfigCommonSignallingPtmpMaxP2mpSvcs	read-write	mandatory	The maximum number of the Signalling SVCs in the switch that can provide point-to-multipoint support. Note that each pt-to-mpt connection through the switch us…
1.3.6.1.4.1.285.2.6.2.19.28	ScalarconfigCommonSscopMaxSaps	read-write	obsolete	The maximum number of SSCOP SAPs. This value is not used.
1.3.6.1.4.1.285.2.6.2.19.29	ScalarconfigCommonSscopMaxLinks	read-write	obsolete	The maximum number of SSCOP Links. This value is not used.
1.3.6.1.4.1.285.2.6.2.19.30	ScalarconfigCommonSscopMaxRcvWinSize	read-write	mandatory	The maximum SSCOP protocol receive window size. Q.2110, app.IV, defines calculation of window size.
1.3.6.1.4.1.285.2.6.2.19.31	ScalarconfigCommonSscopMaxCc	read-write	mandatory	The maximum SSCOP Connection Control state variable value (the maximum transmissions of a BGN, END, ER or RS PDU).
1.3.6.1.4.1.285.2.6.2.19.32	ScalarconfigCommonSscopMaxPd	read-write	mandatory	The maximum SSCOP Poll Data state variable value (the maximum transmissions of between polls).
1.3.6.1.4.1.285.2.6.2.19.33	ScalarconfigCommonSscopMaxStat	read-write	mandatory	The maximum number of list elements placed in a SSCOP STAT PDU.
1.3.6.1.4.1.285.2.6.2.19.34	ScalarconfigCommonSscopTimerPoll	read-write	mandatory	SSCOP Timer-POLL (in milliseconds). This defines the maximum interval between SSCOP sending POLLs, while it has unacknowledged SD PDU transmits. Ensures that p…
1.3.6.1.4.1.285.2.6.2.19.35	ScalarconfigCommonSscopTimerNoResponse	read-write	mandatory	SSCOP Timer-NO-RESPONSE (in seconds). The time interval during which at least one STAT PDU must be received, when there are unacknowledged SD PDU transmits. Mu…
1.3.6.1.4.1.285.2.6.2.19.36	ScalarconfigCommonSscopTimerKeepAlive	read-write	mandatory	SSCOP Timer-KEEP-ALIVE (in seconds). Used when there are no unacknowledged SD PDU transmits. Defines the time period after sending a POLL, during which a STAT …
1.3.6.1.4.1.285.2.6.2.19.37	ScalarconfigCommonSscopTimerIdle	read-write	mandatory	SSCOP Timer-IDLE (in seconds). Defines the idle-period during which no POLL PDUs are sent, when there are no unacknowledged SD PDU transmits. May be much great…
1.3.6.1.4.1.285.2.6.2.19.38	ScalarconfigCommonSscopTimerCc	read-write	mandatory	SSCOP Timer-CC (in units of 100 milliseconds). Defines the maximum time to wait for response, during outgoing link establish, release, resynch and recovery. Sh…
1.3.6.1.4.1.285.2.6.2.19.39	ScalarconfigCommonSscopMaxSduSize	read-write	mandatory	The maximum SSCOP SDU size (SAAL Service Data Unit size) in bytes.
1.3.6.1.4.1.285.2.6.2.19.40	ScalarconfigCommonSscopMaxUuSize	read-write	mandatory	The maximum SSCOP UU size (User-to-User data size) in bytes. Note: This value is currently not needed according to Q.2130, and hence not used.
1.3.6.1.4.1.285.2.6.2.20	NodeconfigIisp
1.3.6.1.4.1.285.2.6.2.20.1	ScalarconfigNextHopRoutingTableNextIndex	read-only	mandatory	The next unused row in configNextHopRoutingTable.
1.3.6.1.4.1.285.2.6.2.20.2	TableconfigNextHopRoutingTable	not-accessible	mandatory	This table contains the IISP routing information.
1.3.6.1.4.1.285.2.6.2.20.2.1	RowconfigNextHopRoutingEntry	not-accessible	mandatory	Each row in this table describes the route to one ATM address prefix.
1.3.6.1.4.1.285.2.6.2.20.2.1.1	ColumnconfigNextHopRoutingIndex	read-only	mandatory	An arbitrary integer used to differentiate multiple rows in the table.
1.3.6.1.4.1.285.2.6.2.20.2.1.2	ColumnconfigNextHopRoutingAtmAddress	read-write	mandatory	The ATM address or ATM summary address to which this row describes a route.
1.3.6.1.4.1.285.2.6.2.20.2.1.3	ColumnconfigNextHopRoutingAddressLength	read-write	mandatory	The number of valid bits in configNextHopRoutingAtmAddress.
1.3.6.1.4.1.285.2.6.2.20.2.1.4	ColumnconfigNextHopRoutingEPort	read-write	mandatory	The ifIndex of the ATM port that leads to the specified ATM address.
1.3.6.1.4.1.285.2.6.2.20.2.1.5	ColumnconfigNextHopRoutingSignallingType	read-write	obsolete	Not used.
1.3.6.1.4.1.285.2.6.2.20.2.1.6	ColumnconfigNextHopRoutingRowStatus	read-write	mandatory	Used to control creation and deletion of new rows in the table.
1.3.6.1.4.1.285.2.6.2.21	NodeconfigIpArp
1.3.6.1.4.1.285.2.6.2.21.1	TableatmIpArpTable	not-accessible	mandatory	This table contains the IP-address-to-ATM-address translation table used by the IP ARP server.
1.3.6.1.4.1.285.2.6.2.21.1.1	RowatmIpArpEntry	not-accessible	mandatory	Each row in this table describes one IP address.
1.3.6.1.4.1.285.2.6.2.21.1.1.1	ColumnatmIpArpServerIndex	read-write	mandatory	The index of the IP ARP server that handles this row.
1.3.6.1.4.1.285.2.6.2.21.1.1.2	ColumnatmIpArpIpAddress	read-write	mandatory	The IP address that this row translates.
1.3.6.1.4.1.285.2.6.2.21.1.1.3	ColumnatmIpArpAtmAddress	read-write	mandatory	The ATM address that corresponds to atmIpArpIpAddress.
1.3.6.1.4.1.285.2.6.2.21.1.1.4	ColumnatmIpArpType	read-write	mandatory	The entry type. 'Dynamic' means created automatically, 'static' means created by management.
1.3.6.1.4.1.285.2.6.2.21.2	ScalarconfigIpArpServerTableNextIndex	read-only	mandatory	The next unused row in configIpArpServerTable.
1.3.6.1.4.1.285.2.6.2.21.3	TableconfigIpArpServerTable	not-accessible	mandatory	This table is used to create and configure the IP ARP servers.
1.3.6.1.4.1.285.2.6.2.21.3.1	RowconfigIpArpServerEntry	not-accessible	mandatory	Each row in this table describes one IP ARP server, servicing one IP subnet.
1.3.6.1.4.1.285.2.6.2.21.3.1.1	ColumnconfigIpArpServerIndex	read-only	mandatory	An arbitrary integer used to differentiate multiple rows containing different IP ARP servers.
1.3.6.1.4.1.285.2.6.2.21.3.1.2	ColumnconfigIpArpServerAtmAddressSpec	read-write	mandatory	An ATM Address specified by the network or local management that, with the ATM address mask, determines a portion of the ATM address that the IP ARP Server wil…
1.3.6.1.4.1.285.2.6.2.21.3.1.3	ColumnconfigIpArpServerAtmAddressMask	read-write	mandatory	The ATM address mask associated with the object configIpArpServerAtmAddressSpec. The value of the mask is an ATM address with the don't care portion set to zer…
1.3.6.1.4.1.285.2.6.2.21.3.1.4	ColumnconfigIpArpServerAtmAddressActual	read-only	mandatory	The resultant ATM address in use by the IP ARP Server. This object is a product of the specified ATM address, mask, and interaction with the network. This obje…
1.3.6.1.4.1.285.2.6.2.21.3.1.5	ColumnconfigIpArpServerIpSubnetAddress	read-write	mandatory	The address of the IP subnet serviced by this IP ARP server.
1.3.6.1.4.1.285.2.6.2.21.3.1.6	ColumnconfigIpArpServerIpSubnetMask	read-write	mandatory	The subnet mask of the IP subnet serviced by this IP ARP server.
1.3.6.1.4.1.285.2.6.2.21.3.1.7	ColumnconfigIpArpServerAdminStatus	read-write	mandatory	Enables or disable the IP ARP server.
1.3.6.1.4.1.285.2.6.2.21.3.1.8	ColumnconfigIpArpServerOperStatus	read-only	mandatory	Operational state of this IP ARP Server entry.
1.3.6.1.4.1.285.2.6.2.21.3.1.9	ColumnconfigIpArpServerRowStatus	read-write	mandatory	Used to control creation and deletion of new rows in the table.
1.3.6.1.4.1.285.2.6.2.21.4	ScalarconfigClipArpServer	read-write	mandatory	The ATM address of the IP ARP server used by the CLIP client in the switch.
1.3.6.1.4.1.285.2.6.2.22	NodeconfigQosClass
1.3.6.1.4.1.285.2.6.2.22.1	TableqosClassTable	not-accessible	mandatory	This table provides the translation between the Quality of Service (QoS) classes used in UNI 3.1 signalling and the corresponding values of the QoS parameters.…
1.3.6.1.4.1.285.2.6.2.22.1.1	RowqosClassEntry	not-accessible	mandatory	Each row in this table describes one QoS class.
1.3.6.1.4.1.285.2.6.2.22.1.1.1	ColumnqosClassClass	read-only	mandatory	The QoS class number.
1.3.6.1.4.1.285.2.6.2.22.1.1.2	ColumnqosClassCtd	read-write	mandatory	The Cell Transfer Delay (in microseconds) for this QoS class.
1.3.6.1.4.1.285.2.6.2.22.1.1.3	ColumnqosClassCdv	read-write	mandatory	The Cell Delay Variation (in microseconds) for this QoS class.
1.3.6.1.4.1.285.2.6.2.22.1.1.4	ColumnqosClassLogClr	read-write	mandatory	Minus the base 10 logarithm of the Cell Loss Ratio for this QoS class.
1.3.6.1.4.1.285.2.6.2.23	NodeconfigSerial
1.3.6.1.4.1.285.2.6.2.23.1	ScalarconfigSerialObmSlip	read-write	mandatory	Controls if the serial line is used for OBM or SLIP.
1.3.6.1.4.1.285.2.6.2.24	NodeconfigOam
1.3.6.1.4.1.285.2.6.2.24.1	NodeifMIBObjects
1.3.6.1.4.1.285.2.6.2.24.1.3	TableifTestTable	not-accessible	mandatory	This table contains one entry per interface. It is a copy of the ifTestTable in the ifMIB as defined in RFC 1573.
1.3.6.1.4.1.285.2.6.2.24.1.3.1	RowifTestEntry	not-accessible	mandatory	An entry containing objects for invoking tests on an interface.
1.3.6.1.4.1.285.2.6.2.24.1.3.1.1	ColumnifTestId	read-write	mandatory	This object identifies the current invocation of the interface's test. The type of this object is identical to the textual convention TestAndIncr, defined in R…
1.3.6.1.4.1.285.2.6.2.24.1.3.1.2	ColumnifTestStatus	read-write	mandatory	This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object i…
1.3.6.1.4.1.285.2.6.2.24.1.3.1.4	ColumnifTestResult	read-only	mandatory	This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this …
1.3.6.1.4.1.285.2.6.2.24.1.3.1.6	ColumnifTestOwner	read-write	mandatory	The entity which currently has the 'ownership' required to invoke a test on this interface.
1.3.6.1.4.1.285.2.6.2.24.2	NodeatmTESTMIBObjects
1.3.6.1.4.1.285.2.6.2.24.2.1	NodeatmLoopbackTestGroup
1.3.6.1.4.1.285.2.6.2.24.2.1.4	NodeatmLoopbackTestTypes
1.3.6.1.4.1.285.2.6.2.24.2.1.4.1	NodeatmLoopbackVpE2e
1.3.6.1.4.1.285.2.6.2.24.2.1.4.2	NodeatmLoopbackVcE2e
1.3.6.1.4.1.285.2.6.2.24.2.1.4.3	NodeatmLoopbackVpSegment
1.3.6.1.4.1.285.2.6.2.24.2.1.4.4	NodeatmLoopbackVcSegment
1.3.6.1.4.1.285.2.6.2.25	NodeconfigTest
1.3.6.1.4.1.285.2.6.2.25.1	ScalarcontrolDeleteCode	write-only	optional	Writing a value of 0x54455354 (i.e. 'TEST') to this object causes both installed code blocks to be erased
1.3.6.1.4.1.285.2.6.2.25.2	ScalarcontrolDeleteConfig	write-only	optional	Writing a value of 0x54455354 (i.e. 'TEST') to this object causes the configuration flash to be erased
1.3.6.1.4.1.285.2.6.2.26	NodeconfigPriorityBuffer
1.3.6.1.4.1.285.2.6.2.26.1	TableconfigPriorityBufferTable	not-accessible	mandatory	This table contains the maximum total number of cells buffers that may be allocated to a particular queue priority.
1.3.6.1.4.1.285.2.6.2.26.1.1	RowconfigPriorityBufferEntry	not-accessible	mandatory	Each row in this table describes one queue priority.
1.3.6.1.4.1.285.2.6.2.26.1.1.1	ColumnconfigPriorityBufferIndex	read-only	mandatory	The queue priority.
1.3.6.1.4.1.285.2.6.2.26.1.1.2	ColumnconfigPriorityBufferSize	read-write	mandatory	The maximum total cell buffer allocation for this queue priority.
1.3.6.1.4.1.285.2.6.3	NodecrossfireAtmStatus
1.3.6.1.4.1.285.2.6.3	NodeglobalCongestionTrap			The rate of globally discarded cells/second rises or falls above/below defined threshold.
1.3.6.1.4.1.285.2.6.3.1	NodestatusBasicHw
1.3.6.1.4.1.285.2.6.3.1.1	ScalarstatusHwChassisCurrentXModules	read-only	mandatory	The number of installed expansion modules.
1.3.6.1.4.1.285.2.6.3.1.2	ScalarstatusHwChassisCurrentEPorts	read-only	mandatory	The number of installed ATM ports.
1.3.6.1.4.1.285.2.6.3.1.3	ScalarstatusHwChassisUpsOperState	read-only	mandatory	The operational state of the Uninterrupted Power Supply (UPS).
1.3.6.1.4.1.285.2.6.3.1.4	ScalarstatusHwChassisSwitchingSystemSize	read-only	mandatory	The number of Core Access Points in the switch.
1.3.6.1.4.1.285.2.6.3.1.5	ScalarstatusHwChassisCellBufferSize	read-only	mandatory	The size (in K cells) of the switch core cell buffer.
1.3.6.1.4.1.285.2.6.3.1.6	ScalarstatusCurrentTemperatureConditionState	read-only	mandatory	The current state of the temperature within the switch. Possible values are: normal The temperature is below fhTrapDashboardControlThresholdLow. highDecreasing…
1.3.6.1.4.1.285.2.6.3.1.7	ScalarstatusCurrentTemperatureGauge	read-only	mandatory	The current temperature in degrees Celsius.
1.3.6.1.4.1.285.2.6.3.1.8	ScalarstatusCurrentTemperatureLatch	read-write	mandatory	Indicates if the temperature has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset by management.
1.3.6.1.4.1.285.2.6.3.1.9	ScalarstatusCurrentTemperatureLatchTime	read-only	mandatory	The value of sysUpTime when the system turned statusCurrentTemperatureLatch on.
1.3.6.1.4.1.285.2.6.3.1.10	ScalarstatusFanOperStatus	read-only	mandatory	Indicates if the fan is running.
1.3.6.1.4.1.285.2.6.3.1.11	TablestatusPsuStatusTable	not-accessible	mandatory	This table contains status information about the two power supplies in the switch.
1.3.6.1.4.1.285.2.6.3.1.11.1	RowstatusPsuStatusEntry	not-accessible	mandatory	Each row in this table describes one power supply.
1.3.6.1.4.1.285.2.6.3.1.11.1.1	ColumnstatusPsuIndex	read-only	mandatory	The power supply number.
1.3.6.1.4.1.285.2.6.3.1.11.1.2	ColumnstatusPsuOperStatus	read-only	mandatory	Indicates the operational state of the power supply.
1.3.6.1.4.1.285.2.6.3.2	NodestatusProcessorModule
1.3.6.1.4.1.285.2.6.3.2.1	ScalarstatusProcessorModuleStatusLed	read-only	mandatory	Indicates the state of the status LED on the processor module.
1.3.6.1.4.1.285.2.6.3.2.2	ScalarstatusProcessorModuleFaultLed	read-only	mandatory	Indicates the state of the fault LED on the processor module.
1.3.6.1.4.1.285.2.6.3.3	NodestatusFeatureModule
1.3.6.1.4.1.285.2.6.3.3.1	ScalarstatusFeatureModuleOperStatus	read-only	mandatory	Indicates the operational state of the feature module.
1.3.6.1.4.1.285.2.6.3.3.2	ScalarstatusFeatureModuleStatusLed	read-only	mandatory	Indicates the state of the LED on the feature module.
1.3.6.1.4.1.285.2.6.3.4	NodestatusXModule
1.3.6.1.4.1.285.2.6.3.4.1	TablestatusXModuleTable	not-accessible	mandatory	This table contains status information about the expansion modules in the switch.
1.3.6.1.4.1.285.2.6.3.4.1.1	RowstatusXModuleEntry	not-accessible	mandatory	Each row in this table describes one expansion module.
1.3.6.1.4.1.285.2.6.3.4.1.1.1	ColumnstatusXModuleSlotIndex	read-only	mandatory	The expansion module slot in the switch.
1.3.6.1.4.1.285.2.6.3.4.1.1.2	ColumnstatusXModuleOperStatus	read-only	mandatory	The operational state of the expansion module.
1.3.6.1.4.1.285.2.6.3.4.1.1.3	ColumnstatusXModuleNoOfSlotsUsed	read-only	mandatory	Indicates the number of slots occupied by this expansion module.
1.3.6.1.4.1.285.2.6.3.4.1.1.4	ColumnstatusXModuleIPort1SlotIndex	read-only	mandatory	The slot number for the first iPort connected to this expansion module. This slot number can be used to index, for example, configIPortTable. A value of 0 indi…
1.3.6.1.4.1.285.2.6.3.4.1.1.5	ColumnstatusXModuleIPort1RIndex	read-only	mandatory	The index of the first iPort connected to this expansion module. This value can be used to index, for example, configIPortTable.
1.3.6.1.4.1.285.2.6.3.4.1.1.6	ColumnstatusXModuleIPort2SlotIndex	read-only	mandatory	The slot number for the second iPort connected to this expansion module. This slot number can be used to index, for example, configIPortTable. A value of 0 ind…
1.3.6.1.4.1.285.2.6.3.4.1.1.7	ColumnstatusXModuleIPort2RIndex	read-only	mandatory	The index of the second iPort connected to this expansion module. This value can be used to index, for example, configIPortTable.
1.3.6.1.4.1.285.2.6.3.4.1.1.8	ColumnstatusXModuleIPort3SlotIndex	read-only	mandatory	The slot number for the third iPort connected to this expansion module. This slot number can be used to index, for example, configIPortTable. A value of 0 indi…
1.3.6.1.4.1.285.2.6.3.4.1.1.9	ColumnstatusXModuleIPort3RIndex	read-only	mandatory	The index of the third iPort connected to this expansion module. This value can be used to index, for example, configIPortTable.
1.3.6.1.4.1.285.2.6.3.4.1.1.10	ColumnstatusXModuleIPort4SlotIndex	read-only	mandatory	The slot number for the fourth iPort connected to this expansion module. This slot number can be used to index, for example, configIPortTable. A value of 0 ind…
1.3.6.1.4.1.285.2.6.3.4.1.1.11	ColumnstatusXModuleIPort4RIndex	read-only	mandatory	The index of the fourth iPort connected to this expansion module. This value can be used to index, for example, configIPortTable.
1.3.6.1.4.1.285.2.6.3.6	NodestatusEPort
1.3.6.1.4.1.285.2.6.3.6.1	TablestatusEPortTable	not-accessible	mandatory	This table provides status information about the ATM ports on the switch.
1.3.6.1.4.1.285.2.6.3.6.1.1	RowstatusEPortEntry	not-accessible	mandatory	Each row in this table describes one ATM port.
1.3.6.1.4.1.285.2.6.3.6.1.1.1	ColumnstatusEPortIfIndex	read-only	mandatory	The ifIndex of the ATM port.
1.3.6.1.4.1.285.2.6.3.6.1.1.2	ColumnstatusEPortXModuleIndex	read-only	mandatory	The expansion module on which this ATM port is located.
1.3.6.1.4.1.285.2.6.3.6.1.1.3	ColumnstatusEPortRIndex	read-only	mandatory	The position within the expansion module of this ATM port.
1.3.6.1.4.1.285.2.6.3.6.1.1.4	ColumnstatusEPortOperStatus	read-only	mandatory	The operational state of the ATM port.
1.3.6.1.4.1.285.2.6.3.6.1.1.5	ColumnstatusEPortPhyState	read-only	mandatory	The state of the ATM port PHY.
1.3.6.1.4.1.285.2.6.3.6.1.1.6	ColumnstatusEPortType	read-only	mandatory	The ATM port type.
1.3.6.1.4.1.285.2.6.3.6.1.1.7	ColumnstatusEPortRxSyncLedState	read-only	mandatory	The state of the RXSYNC LED at the ATM port.
1.3.6.1.4.1.285.2.6.3.6.1.1.8	ColumnstatusEPortSignalLossLedState	read-only	mandatory	The state of the SIGLOSS LED at the ATM port.
1.3.6.1.4.1.285.2.6.3.6.1.1.9	ColumnstatusEPortPhyPortIndex	read-only	mandatory	Index into a physical layer table.
1.3.6.1.4.1.285.2.6.3.6.1.1.10	ColumnstatusEPortLoopbackState	read-only	mandatory	The loopback state of the ATM port.
1.3.6.1.4.1.285.2.6.3.6.1.1.11	ColumnstatusEPortLoopbackErrorCode	read-only	mandatory	Loopback test error information.
1.3.6.1.4.1.285.2.6.3.6.1.1.12	ColumnstatusEPortIlmiState	read-only	mandatory	State of the ILMI protocol on the ATM port.
1.3.6.1.4.1.285.2.6.3.6.1.1.13	ColumnstatusEPortAdjInfoTransmissionType	read-only	mandatory	UNI 2.0 only: Transmission type of the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.14	ColumnstatusEPortAdjInfoMediaType	read-only	mandatory	UNI 3.1 only: The media type of the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.15	ColumnstatusEPortAdjInfoIfName	read-only	mandatory	The ifName from MIB-II of the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.16	ColumnstatusEPortAdjInfoSystemIdentifier	read-only	mandatory	The IEEE MAC address of the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.17	ColumnstatusEPortAdjInfoMaxVpcs	read-only	mandatory	The maximum number of VPCs on the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.18	ColumnstatusEPortAdjInfoMaxVccs	read-only	mandatory	The maximum number of VCC on the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.19	ColumnstatusEPortAdjInfoMaxVpiBits	read-only	mandatory	The number of bits used in a VPI on the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.20	ColumnstatusEPortAdjInfoMaxVciBits	read-only	mandatory	The number of bits used in a VCI on the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.21	ColumnstatusEPortAdjInfoUniType	read-only	mandatory	The UNI type of the remote ATM port to which the ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.22	ColumnstatusEPortAdjInfoUniVersion	read-only	mandatory	The UNI version of the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.23	ColumnstatusEPortAdjInfoDeviceType	read-only	mandatory	The device type of the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.24	ColumnstatusEPortAdjInfoIlmiVersion	read-only	mandatory	The ILMI version used by the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.25	ColumnstatusEPortAdjInfoNniSigVersion	read-only	mandatory	The NNI signalling protocol used by the remote ATM port to which this ATM port is connected.
1.3.6.1.4.1.285.2.6.3.6.1.1.26	ColumnstatusEPortAutoconfigMaxVpcs	read-only	mandatory	The maximum number of VPCs that the connection between this ATM port and its peer will use.
1.3.6.1.4.1.285.2.6.3.6.1.1.27	ColumnstatusEPortAutoconfigMaxVccs	read-only	mandatory	The maximum number of VCCs that the connection between this ATM port and its peer will use.
1.3.6.1.4.1.285.2.6.3.6.1.1.28	ColumnstatusEPortAutoconfigMaxVpiBits	read-only	mandatory	The number of bits used in a VPI on the connection between this ATM port and its peer.
1.3.6.1.4.1.285.2.6.3.6.1.1.29	ColumnstatusEPortAutoconfigMaxVciBits	read-only	mandatory	The number of bits used in a VCI on the connection between this ATM port and its peer.
1.3.6.1.4.1.285.2.6.3.6.1.1.30	ColumnstatusEPortAutoconfigUniVersion	read-only	mandatory	The UNI version used between this ATM port and its peer.
1.3.6.1.4.1.285.2.6.3.6.1.1.31	ColumnstatusEPortAutoconfigDeviceType	read-only	mandatory	The device type of this ATM port used in its communication with its peer.
1.3.6.1.4.1.285.2.6.3.6.1.1.32	ColumnstatusEPortAutoconfigDerivedInterfaceType	read-only	mandatory	The UNI/NNI interface type of this ATM port used in its communication with its peer.
1.3.6.1.4.1.285.2.6.3.6.1.1.33	ColumnstatusEPortAutoconfigMaxSvpcVpi	read-only	mandatory	The highest VPI number used for signalled VPCs between this ATM port and its peer.
1.3.6.1.4.1.285.2.6.3.6.1.1.34	ColumnstatusEPortAutoconfigMaxSvccVpi	read-only	mandatory	The highest VPI number used for signalled VCCs between this ATM port and its peer.
1.3.6.1.4.1.285.2.6.3.6.1.1.35	ColumnstatusEPortAutoconfigMinSvccVci	read-only	mandatory	The lowest VCI number used for signalled VCCs between this ATM port and its peer.
1.3.6.1.4.1.285.2.6.3.6.1.1.36	ColumnstatusEPortAdjInfoMaxSvpcVpi	read-only	mandatory	The MaxSvpcVpi value of the remote port.
1.3.6.1.4.1.285.2.6.3.6.1.1.37	ColumnstatusEPortAdjInfoMaxSvccVpi	read-only	mandatory	The MaxSvccVpi value of the remote port.
1.3.6.1.4.1.285.2.6.3.6.1.1.38	ColumnstatusEPortAdjInfoMinSvccVci	read-only	mandatory	The MinSvccVci value of the remote port.
1.3.6.1.4.1.285.2.6.3.7	NodestatusVpcVcc
1.3.6.1.4.1.285.2.6.3.7.1	TablevpcExtensionTable	not-accessible	mandatory	This table provides information about VPCs in addition to what is found in the ATM MIB.
1.3.6.1.4.1.285.2.6.3.7.1.1	RowvpcExtensionEntry	not-accessible	mandatory	Each row in this table describes one VPC.
1.3.6.1.4.1.285.2.6.3.7.1.1.1	ColumnvpcExtensionIndex	read-only	mandatory	An arbitrary integer used to differentiate multiple rows in this table.
1.3.6.1.4.1.285.2.6.3.7.1.1.2	ColumnvpcExtensionVpCrossConnectIndex	read-only	mandatory	The index of this VPC in the atmVpCrossConnectTable in the ATM MIB.
1.3.6.1.4.1.285.2.6.3.7.1.1.3	ColumnvpcExtensionOrigAtmAddr	read-only	mandatory	The ATM address that originated this VPC.
1.3.6.1.4.1.285.2.6.3.7.1.1.4	ColumnvpcExtensionTermAtmAddr	read-only	mandatory	The ATM address at which this VPC terminates.
1.3.6.1.4.1.285.2.6.3.7.1.1.5	ColumnvpcExtensionCapabilities	read-only	mandatory	Reserved for special capabilities.
1.3.6.1.4.1.285.2.6.3.7.2	TablevccExtensionTable	not-accessible	mandatory	This table provides information about VCCs in addition to what is found in the ATM MIB.
1.3.6.1.4.1.285.2.6.3.7.2.1	RowvccExtensionEntry	not-accessible	mandatory	Each row in this table describes one VCC.
1.3.6.1.4.1.285.2.6.3.7.2.1.1	ColumnvccExtensionIndex	read-only	mandatory	An arbitrary integer used to differentiate multiple rows in this table.
1.3.6.1.4.1.285.2.6.3.7.2.1.2	ColumnvccExtensionVcCrossConnectIndex	read-only	mandatory	The index of this VCC in the atmVcCrossConnectTable in the ATM MIB.
1.3.6.1.4.1.285.2.6.3.7.2.1.3	ColumnvccExtensionOrigAtmAddr	read-only	mandatory	The ATM address that originated this VCC.
1.3.6.1.4.1.285.2.6.3.7.2.1.4	ColumnvccExtensionTermAtmAddr	read-only	mandatory	The ATM address at which this VPC terminates.
1.3.6.1.4.1.285.2.6.3.7.2.1.5	ColumnvccExtensionCapabilities	read-only	mandatory	Reserved for special capabilities.
1.3.6.1.4.1.285.2.6.3.7.2.1.6	ColumnvccExtensionEarlyPacketDiscard	read-only	mandatory	Indicates if early packet discard is allowed on this VCC.
1.3.6.1.4.1.285.2.6.3.8	NodestatusFatalLog
1.3.6.1.4.1.285.2.6.3.8.1	ScalarstatusFatalStatUsed	read-only	mandatory	The number of currently used entries in the FATAL log.
1.3.6.1.4.1.285.2.6.3.8.2	ScalarstatusFatalStatFree	read-only	mandatory	The number of free entries in the FATAL log.
1.3.6.1.4.1.285.2.6.3.8.3	ScalarstatusFatalStatOverflow	read-only	mandatory	Indicates if there has been an overflow in the FATAL log.
1.3.6.1.4.1.285.2.6.3.8.4	ScalarstatusFatalStatMaxDumpLength	read-only	mandatory	The maximum number of bytes that can be dumped.
1.3.6.1.4.1.285.2.6.3.8.5	TablestatusFatalTable	not-accessible	mandatory	This table contains the contents of the FATAL log.
1.3.6.1.4.1.285.2.6.3.8.5.1	RowstatusFatalEntry	not-accessible	mandatory	Each row in this table describes one entry in the FATAL log.
1.3.6.1.4.1.285.2.6.3.8.5.1.1	ColumnstatusFatalIndex	read-only	mandatory	An arbitrary integer used to differentiate multiple rows in the table.
1.3.6.1.4.1.285.2.6.3.8.5.1.2	ColumnstatusFatalSerial	read-only	mandatory	The serial number of this entry.
1.3.6.1.4.1.285.2.6.3.8.5.1.3	ColumnstatusFatalTimestamp	read-only	mandatory	Time when the FATAL error occurred (measured in seconds since 00:00:00 UTC on 1 January 1970).
1.3.6.1.4.1.285.2.6.3.8.5.1.4	ColumnstatusFatalTimeString	read-only	mandatory	Time when the FATAL error occurred (as a string giving the UTC time and date).
1.3.6.1.4.1.285.2.6.3.8.5.1.5	ColumnstatusFatalSource	read-only	mandatory	Source file name of version of the software that generated the FATAL error.
1.3.6.1.4.1.285.2.6.3.8.5.1.6	ColumnstatusFatalLine	read-only	mandatory	The line number of the source code instruction that generated the FATAL error.
1.3.6.1.4.1.285.2.6.3.8.5.1.7	ColumnstatusFatalOriginalDumpSize	read-only	mandatory	The original size of the dumped objects.
1.3.6.1.4.1.285.2.6.3.8.5.1.8	ColumnstatusFatalDumpSize	read-only	mandatory	The actual size of the dumped objects.
1.3.6.1.4.1.285.2.6.3.8.5.1.9	ColumnstatusFatalDump	read-only	mandatory	The dumped objects.
1.3.6.1.4.1.285.2.6.4	NodecrossfireAtmStatistics
1.3.6.1.4.1.285.2.6.4	NodeglobalInvalidCellRateTrap			The rate of invalid cells/second is above the defined threshold.
1.3.6.1.4.1.285.2.6.4.1	NodestatisticsGlobal
1.3.6.1.4.1.285.2.6.4.1.1	ScalarstatsGlobalCongestionState	read-only	mandatory	The current congestion state within the switch, based on the number of globally discarded cells. Possible values are: normal The cell discard rate is below fhT…
1.3.6.1.4.1.285.2.6.4.1.2	ScalarstatsGlobalCongestionDiscardCellRate	read-only	mandatory	The rate of globally discarded cells (measured in cells/second), averaged over 10 seconds.
1.3.6.1.4.1.285.2.6.4.1.3	ScalarstatsGlobalCongestionDiscardCellCounter	read-only	mandatory	The number of globally discarded cells.
1.3.6.1.4.1.285.2.6.4.1.4	ScalarstatsGlobalCongestionDiscardCellLatch	read-write	mandatory	Indicates if the cell discard rate has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset by management.
1.3.6.1.4.1.285.2.6.4.1.5	ScalarstatsGlobalCongestionDiscardCellLatchTime	read-only	mandatory	The value of sysUpTime when the system turned statsGlobalCongestionDiscardCellLatch on.
1.3.6.1.4.1.285.2.6.4.1.6	ScalarstatsInvalidCellRateState	read-only	mandatory	The current invalid cell state within the switch, based on the number of invalid cells received. Possible values are: normal The invalid cell rate is below fhT…
1.3.6.1.4.1.285.2.6.4.1.7	ScalarstatsInvalidCellRate	read-only	mandatory	The rate of invalid cells (measured in cells/second), averaged over 10 seconds.
1.3.6.1.4.1.285.2.6.4.1.8	ScalarstatsInvalidCellCounter	read-only	mandatory	The number of invalid cells received.
1.3.6.1.4.1.285.2.6.4.1.9	ScalarstatsInvalidCellLatch	read-write	mandatory	Indicates if the invalid cell rate has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset by management.
1.3.6.1.4.1.285.2.6.4.1.10	ScalarstatsInvalidCellLatchTime	read-only	mandatory	The value of sysUpTime when the system turned statsInvalidCellLatch on.
1.3.6.1.4.1.285.2.6.4.2	NodestatisticsCpuPort
1.3.6.1.4.1.285.2.6.4.2.1	ScalarstatsCpuPortCongestionState	read-only	mandatory	The current congestion state of the switch processor queue, based on the number of cells in the switch processor queue. Possible values are: normal The queue l…
1.3.6.1.4.1.285.2.6.4.2.2	ScalarstatsCpuPortDiscardCellRate	read-only	mandatory	The rate of discarded cells per second destined for the switch processor queue (measured in cells/second), averaged over 10 seconds.
1.3.6.1.4.1.285.2.6.4.2.3	ScalarstatsCpuPortDiscardCellCounter	read-only	mandatory	The number of cells, destined for the switch processor queue, that have been discarded.
1.3.6.1.4.1.285.2.6.4.2.4	ScalarstatsCpuPortDiscardCellLatch	read-write	mandatory	Indicates if the switch processor queue cell discard rate has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset b…
1.3.6.1.4.1.285.2.6.4.2.5	ScalarstatsCpuPortDiscardCellLatchTime	read-only	mandatory	The value of sysUpTime when the system turned statsCpuPortDiscardCellLatch on.
1.3.6.1.4.1.285.2.6.4.3	NodestatisticsEPort
1.3.6.1.4.1.285.2.6.4.3.1	TablestatsEportTable	not-accessible	mandatory	This table contains ATM port HEC error statistics.
1.3.6.1.4.1.285.2.6.4.3.1.1	RowstatsEportEntry	not-accessible	mandatory	Each row in this table describes one ATM port.
1.3.6.1.4.1.285.2.6.4.3.1.1.1	ColumnstatsEPortIfIndex	read-only	mandatory	The ifIndex of the ATM port.
1.3.6.1.4.1.285.2.6.4.3.1.1.2	ColumnstatsEPortHecErrorRateConditionState	read-only	mandatory	The current HEC error state within the switch, based on the rate of cells with HEC errors. Possible values are: normal The HEC error cell rate is below fhTrapD…
1.3.6.1.4.1.285.2.6.4.3.1.1.3	ColumnstatsEPortRxHecErrorCellRate	read-only	mandatory	The rate of cells with HEC errors received on this ATM port (measured in cells/second), averaged over 10 seconds.
1.3.6.1.4.1.285.2.6.4.3.1.1.4	ColumnstatsEPortRxHecErrorCellCounter	read-only	mandatory	The number of cells with HEC errors received on this ATM port.
1.3.6.1.4.1.285.2.6.4.3.1.1.5	ColumnstatsEPortRxHecErrorCellLatch	read-write	mandatory	Indicates if the HEC error cell rate has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset by management.
1.3.6.1.4.1.285.2.6.4.3.1.1.6	ColumnstatsEPortRxHecErrorCellLatchTime	read-only	mandatory	The value of sysUpTime when the system turned statsEPortRxHecErrorCellLatch on.
1.3.6.1.4.1.285.2.6.4.4	NodestatisticsIPort
1.3.6.1.4.1.285.2.6.4.4.1	TablestatsIPortTable	not-accessible	mandatory	This table contains statistics for the Core Access Points (iPorts) in the switch).
1.3.6.1.4.1.285.2.6.4.4.1.1	RowstatsIPortEntry	not-accessible	mandatory	Each row in this table describes one iPort.
1.3.6.1.4.1.285.2.6.4.4.1.1.1	ColumnstatsIPortSlotIndex	read-only	mandatory	The number of the expansion module to which the iPort is connected.
1.3.6.1.4.1.285.2.6.4.4.1.1.2	ColumnstatsIPortRIndex	read-only	mandatory	The number of the iPort within the expansion module.
1.3.6.1.4.1.285.2.6.4.4.1.1.3	ColumnstatsIPortRxCellRate	read-only	mandatory	The rate of cells received on this iPort (measured in cells/second), averaged over 5 samples, sampled every 2 seconds, computed as 0.8previous+0.2current.
1.3.6.1.4.1.285.2.6.4.4.1.1.4	ColumnstatsIPortTxCellRate	read-only	mandatory	The rate of cells transmitted on this iPort (measured in cells/second), averaged over 5 samples, sampled every 2 seconds, computed as 0.8previous+0.2current.
1.3.6.1.4.1.285.2.6.4.4.1.1.5	ColumnstatsIPortTxParityErrorCellCounter	read-only	mandatory	The number of cells with memory parity error that were read from the switch core cell buffer.
1.3.6.1.4.1.285.2.6.4.4.2	TablestatsQueueCongestionTable	not-accessible	mandatory	This table contains congestion information for each queue attached to each Core Access Point (iPort).
1.3.6.1.4.1.285.2.6.4.4.2.1	RowstatsQueueCongestionEntry	not-accessible	mandatory	Each row in this table describes one queue on one iPort.
1.3.6.1.4.1.285.2.6.4.4.2.1.1	ColumnstatsQueueCongestionSlotIndex	read-only	mandatory	The number of the expansion module to which the iPort is connected.
1.3.6.1.4.1.285.2.6.4.4.2.1.2	ColumnstatsQueueCongestionIPortRIndex	read-only	mandatory	The number of the iPort within the expansion module.
1.3.6.1.4.1.285.2.6.4.4.2.1.3	ColumnstatsQueueCongestionQueueIndex	read-only	mandatory	The queue priority.
1.3.6.1.4.1.285.2.6.4.4.2.1.4	ColumnstatsQueueCongestionConditionState	read-only	mandatory	The current congestion state on the iPort queue, based on the length of the queue. Possible values are: normal The queue length is below fhTrapDashboardControl…
1.3.6.1.4.1.285.2.6.4.4.2.1.5	ColumnstatsQueueCongestionCellsInQueueGauge	read-only	mandatory	The current length of the iPort queue.
1.3.6.1.4.1.285.2.6.4.4.2.1.6	ColumnstatsQueueCongestionCellsInQueueLatch	read-write	mandatory	Indicates if the iPort queue length has been above fhTrapDashboardControlThresholdHigh. This object is writable so that it can be reset by management.
1.3.6.1.4.1.285.2.6.4.4.2.1.7	ColumnstatsQueueCongestionCellsInQueueLatchTime	read-only	mandatory	The value of sysUpTime when the system turned statsQueueCongestionCellsInQueueLatch on.
1.3.6.1.4.1.285.2.6.5	NodecpuPortCongestionTrap			The number of cells in the switch processor queue is above the defined threshold.
1.3.6.1.4.1.285.2.6.5	NodecrossfireAtmTrapControl
1.3.6.1.4.1.285.2.6.5.1	ScalarfhTrapFrequencyCntrlFrequency	read-write	mandatory	Controls how frequently a threshold-exceeded trap may be generated. This object is the maximum number of times each trap may be sent per minute.
1.3.6.1.4.1.285.2.6.5.2	ScalarfhTrapFrequencyCntrlMaxTraps	read-write	mandatory	The maximum number of times each threshold-exceeded trap may be generated during one threshold-exceeded incident if fhTrapDashboardControlFrequencyMode is upTo…
1.3.6.1.4.1.285.2.6.5.3	TablefhTrapDashboardControlTable	not-accessible	mandatory	This table contains the thresholds that trigger various traps.
1.3.6.1.4.1.285.2.6.5.3.1	RowfhTrapDashboardControlEntry	not-accessible	mandatory	Each row in this table describes one trap type.
1.3.6.1.4.1.285.2.6.5.3.1.1	ColumnfhTrapDashboardControlTrapTypeIndex	read-only	mandatory	The trap type.
1.3.6.1.4.1.285.2.6.5.3.1.2	ColumnfhTrapDashboardControlFrequencyMode	read-write	mandatory	Controls the number of times this trap may be generated. The legal values are: oneShot Generate a trap once for each threshold-exceeded incident. forever Gener…
1.3.6.1.4.1.285.2.6.5.3.1.3	ColumnfhTrapDashboardControlThresholdLow	read-write	mandatory	The low threshold hysteresis value. When the measured value drops below this number, trap generation stops. This value must be smaller than or equal to fhTrapD…
1.3.6.1.4.1.285.2.6.5.3.1.4	ColumnfhTrapDashboardControlThresholdHigh	read-write	mandatory	The high threshold hysteresis value. When the measured value rises above this number, trap generation starts. This value must be greater than or equal to fhTra…
1.3.6.1.4.1.285.2.6.5.3.1.5	ColumnfhTrapDashboardControlSamplingInterval	read-write	mandatory	Sampling interval (in seconds) for the value that is to be compared with the thresholds.
1.3.6.1.4.1.285.2.6.5.3.1.6	ColumnfhTrapDashboardControlNoSamples	read-write	mandatory	The number of samples in a running average. A value of 1 indicates no running average.
1.3.6.1.4.1.285.2.6.5.4	ScalartemperatureCriticalTrapThreshold	read-write	mandatory	If the temperature in the switch rises above this value (in degrees Celsius, the temperatureCriticalTrap trap is generated, and the switch is shut down.
1.3.6.1.4.1.285.2.6.6	NodecrossfireAtmTest
1.3.6.1.4.1.285.2.6.6	NodequeueCongestionTrap			The number of cells in an iPort queue is above the defined threshold.
1.3.6.1.4.1.285.2.6.7	Nodecrossfirexlx
1.3.6.1.4.1.285.2.6.7	NodeePortHecErrorRateTrap			The rate of HEC error cells/second is above the defined threshold.
1.3.6.1.4.1.285.2.6.7.3	NodeocCNNI
1.3.6.1.4.1.285.2.6.7.3.1	TableocCNNIMonSimple	not-accessible	optional
1.3.6.1.4.1.285.2.6.7.3.1.1	RowocCNNIMonSEntry	not-accessible	optional
1.3.6.1.4.1.285.2.6.7.3.1.1.1	ColumnocCNNIRoutingTableChanged	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.1.1.2	ColumnocCNNINeighborTableChanged	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.1.1.3	ColumnocCNNILineStatus	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.1.1.4	ColumnocCNNIMACAddress	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.1.1.5	ColumnocCNNIMode	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.1.1.6	ColumnocCNNIProtocolVersion	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.1.1.7	ColumnocCNNIApplID	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.2	NodeocCNNIMonTables
1.3.6.1.4.1.285.2.6.7.3.2.1	TableocCNNIRoutingTable	not-accessible	optional
1.3.6.1.4.1.285.2.6.7.3.2.1.1	RowocCNNIRoutingTableEntry	not-accessible	optional
1.3.6.1.4.1.285.2.6.7.3.2.1.1.1	ColumnocCNNIAddress	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.2.1.1.2	ColumnocCNNIRoutingTableData	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.2.1.1.3	ColumnocCNNIAddressAlias	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.2.2	TableocCNNINeighborTable	not-accessible	optional
1.3.6.1.4.1.285.2.6.7.3.2.2.1	RowocCNNINeighborTableEntry	not-accessible	optional
1.3.6.1.4.1.285.2.6.7.3.2.2.1.1	ColumnocCNNIPort	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.2.2.1.2	ColumnocCNNINeighborTableData	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.2.3	TableocCNNITrapClientTable	not-accessible	optional
1.3.6.1.4.1.285.2.6.7.3.2.3.1	RowocCNNITrapClientTableEntry	not-accessible	optional
1.3.6.1.4.1.285.2.6.7.3.2.3.1.1	ColumnocCNNITrapClientIndex	read-only	optional
1.3.6.1.4.1.285.2.6.7.3.2.3.1.2	ColumnocCNNITrapClientAddress	read-write	optional
1.3.6.1.4.1.285.2.6.7.3.2.3.1.3	ColumnocCNNITrapClientCommName	read-write	optional
1.3.6.1.4.1.285.2.6.7.3.3	NodeocCNNIConfig
1.3.6.1.4.1.285.2.6.7.3.3.1	ScalarocCNNIConfigMethod	read-write	optional	An alorithm used by CNNI. First (0) means that the SETUP frame which arrives first is accepted, all consecutive are discarded. Best (1) means that we delay the…
1.3.6.1.4.1.285.2.6.7.3.3.2	ScalarocCNNIConfigAlgorithm	read-write	optional	An algorithm that is used to determine the cost of a SETUP frame if ocCNNIConfigMethod equals Best (1).
1.3.6.1.4.1.285.2.6.7.3.4	TableocCNNIPortConfig	not-accessible	optional	A table of parameter information for CNNI ports.
1.3.6.1.4.1.285.2.6.7.3.4.1	RowocCNNIPortEntry	not-accessible	optional	An entry in the table, containing information about parameters for CNNI ports.
1.3.6.1.4.1.285.2.6.7.3.4.1.1	ColumnocCNNIPortProtocol	read-write	optional	Routing protocol used on an ATM port.
1.3.6.1.4.1.285.2.6.7.3.4.1.2	ColumnocCNNIPortBorder	read-write	optional	Definition of a role this port has in CNNI cloud. no (0) means that it is connected to another device running CNNI. yes (1) means it is connected to a non-CNNI…
1.3.6.1.4.1.285.2.6.7.3.4.1.3	ColumnocCNNIPortAutoreroute	read-write	optional	An indication if all calls coming from this port should be automatically rerouted by CNNI if a path they are traversing becomes invalid. Refers to UNI ports.
1.3.6.1.4.1.285.2.6.7.3.4.1.4	ColumnocCNNIPortReroute	read-write	optional	An indication if a port should be considered an alternate path for automatic rerouting. Refers to ports that have ocCNNIPortProtocol set to cnni (0).
1.3.6.1.4.1.285.2.6.7.3.4.1.5	ColumnocCNNIPortAssign	read-write	optional	Defines if CNNI should assign VPI/VCI identifiers for this port. For CNNI link (ocCNNIPortProtocol set to cnni (0)) only one end should have it set to yes(1).
1.3.6.1.4.1.285.2.6.7.3.5	NodeocCNNIGlobalStats
1.3.6.1.4.1.285.2.6.7.3.5.1	ScalarocCNNIGlobalStatsTotal	read-only	optional	Total number of active switched connection established by CNNI.
1.3.6.1.4.1.285.2.6.7.3.5.2	ScalarocCNNIGlobalStatsCreated	read-only	optional	Number of connections set up by CNNI that are in CREATED phase.
1.3.6.1.4.1.285.2.6.7.3.5.3	ScalarocCNNIGlobalStatsOneWay	read-only	optional	Number of connections set up by CNNI that are in ONE WAY phase.
1.3.6.1.4.1.285.2.6.7.3.5.4	ScalarocCNNIGlobalStatsConnected	read-only	optional	Number of connections set up by CNNI that are in CONNECTED phase.
1.3.6.1.4.1.285.2.6.7.3.5.5	ScalarocCNNIGlobalStatsBrokenLeaf	read-only	optional	Number of connections set up by CNNI that are in BROKEN LEAF phase.
1.3.6.1.4.1.285.2.6.7.3.5.6	ScalarocCNNIGlobalStatsBrokenRoot	read-only	optional	Number of connections set up by CNNI that are in BROKEN ROOT phase.
1.3.6.1.4.1.285.2.6.7.3.5.7	ScalarocCNNIGlobalStatsRerouteWaiting	read-only	optional	Number of connections set up by CNNI that are in REROUTE WAITING phase.
1.3.6.1.4.1.285.2.6.7.3.6	TableocCNNIAddrStats	not-accessible	optional	A table of CNNI statistics information for an ATM address.
1.3.6.1.4.1.285.2.6.7.3.6.1	RowocCNNIAddrStatsEntry	not-accessible	optional	An entry in a table of CNNI statistics information for an ATM address.
1.3.6.1.4.1.285.2.6.7.3.6.1.1	ColumnocCNNIAddrStatsToTotal	read-only	optional	Total number of active switched connection established by CNNI to this address.
1.3.6.1.4.1.285.2.6.7.3.6.1.2	ColumnocCNNIAddrStatsToCreated	read-only	optional	Number of active switched connection set up by CNNI to this address that are in CREATED phase.
1.3.6.1.4.1.285.2.6.7.3.6.1.3	ColumnocCNNIAddrStatsToOneWay	read-only	optional	Number of active switched connection set up by CNNI to this address that are in ONE WAY phase.
1.3.6.1.4.1.285.2.6.7.3.6.1.4	ColumnocCNNIAddrStatsToConnected	read-only	optional	Number of active switched connection set up by CNNI to this address that are in CONNECTED phase.
1.3.6.1.4.1.285.2.6.7.3.6.1.5	ColumnocCNNIAddrStatsToBrokenLeaf	read-only	optional	Number of active switched connection set up by CNNI to this address that are in BROKEN LEAF phase.
1.3.6.1.4.1.285.2.6.7.3.6.1.6	ColumnocCNNIAddrStatsToBrokenRoot	read-only	optional	Number of active switched connection set up by CNNI to this address that are in BROKEN ROOT phase.
1.3.6.1.4.1.285.2.6.7.3.6.1.7	ColumnocCNNIAddrStatsToRerouteWaiting	read-only	optional	Number of active switched connection set up by CNNI to this address that are in REROUTE WAITING phase.
1.3.6.1.4.1.285.2.6.7.3.6.1.8	ColumnocCNNIAddrStatsFromTotal	read-only	optional	Total number of active switched connection set up by CNNI from this address.
1.3.6.1.4.1.285.2.6.7.3.6.1.9	ColumnocCNNIAddrStatsFromCreated	read-only	optional	Number of active switched connection set up by CNNI from this address that are in CREATED phase.
1.3.6.1.4.1.285.2.6.7.3.6.1.10	ColumnocCNNIAddrStatsFromOneWay	read-only	optional	Number of active switched connection set up by CNNI from this address that are in ONE WAY phase.
1.3.6.1.4.1.285.2.6.7.3.6.1.11	ColumnocCNNIAddrStatsFromConnected	read-only	optional	Number of active switched connection set up by CNNI from this address that are in CONNECTED phase.
1.3.6.1.4.1.285.2.6.7.3.6.1.12	ColumnocCNNIAddrStatsFromBrokenLeaf	read-only	optional	Number of active switched connection set up by CNNI from this address that are in BROKEN LEAF phase.
1.3.6.1.4.1.285.2.6.7.3.6.1.13	ColumnocCNNIAddrStatsFromBrokenRoot	read-only	optional	Number of active switched connection set up by CNNI from this address that are in BROKEN ROOT phase.
1.3.6.1.4.1.285.2.6.7.3.6.1.14	ColumnocCNNIAddrStatsFromRerouteWaiting	read-only	optional	Number of active switched connection set up by CNNI from this address that are in REROUTE WAITING phase.
1.3.6.1.4.1.285.2.6.7.3.7	TableocCNNIAliasTable	not-accessible	optional	A table of symbolic names assigned to ATM addresses.
1.3.6.1.4.1.285.2.6.7.3.7.1	RowocCNNIAliasTableEntry	not-accessible	optional	An entry in a table of symbolic names assigned to ATM addresses.
1.3.6.1.4.1.285.2.6.7.3.7.1.1	ColumnocCNNIAlias	read-write	optional	A symbolic name assigned to an ATM address. It can be 15 characters long max.
1.3.6.1.4.1.285.2.6.7.3.8	NodeocCNNIConnDB
1.3.6.1.4.1.285.2.6.7.3.8.1	ScalarocCNNIFilterAssignID	read-only	optional	First empty slot in CNNI filter table. The NMS station should obtain it first, before setting filter parameters.
1.3.6.1.4.1.285.2.6.7.3.8.2	TableocCNNIFilterTable	not-accessible	optional	Table of filters defined for tracing signalling messages.
1.3.6.1.4.1.285.2.6.7.3.8.2.1	RowocCNNIFilterTableEntry	not-accessible	optional	Entry in a table of filters for tracing signalling messages.
1.3.6.1.4.1.285.2.6.7.3.8.2.1.1	ColumnocCNNIFilterID	read-only	optional	Unique identificator of a filter.
1.3.6.1.4.1.285.2.6.7.3.8.2.1.2	ColumnocCNNIFilterTypePres	read-write	optional	Indicates if a connection type field is present in the filter definition.
1.3.6.1.4.1.285.2.6.7.3.8.2.1.3	ColumnocCNNIFilterTypeData	read-write	optional	Connection type field in the filter definition. This field has any meaning only if ocCNNIFilterTypePres is set to present (1).
1.3.6.1.4.1.285.2.6.7.3.8.2.1.4	ColumnocCNNIFilterInPortPres	read-write	optional	Indicates if a incoming port field is present in the filter definition.
1.3.6.1.4.1.285.2.6.7.3.8.2.1.5	ColumnocCNNIFilterInPortData	read-write	optional	Incoming port field in the filter definition. This field has any meaning only if ocCNNIFilterInPortPres is set to present (1).
1.3.6.1.4.1.285.2.6.7.3.8.2.1.6	ColumnocCNNIFilterOutPortPres	read-write	optional	Indicates if a outgoing port field is present in the filter definition.
1.3.6.1.4.1.285.2.6.7.3.8.2.1.7	ColumnocCNNIFilterOutPortData	read-write	optional	Outgoing port field in the filter definition. This field has any meaning only if ocCNNIFilterOutPortPres is set to present (1).
1.3.6.1.4.1.285.2.6.7.3.8.2.1.8	ColumnocCNNIFilterCgPtyPres	read-write	optional	Indicates if a calling party field is present in the filter definition.
1.3.6.1.4.1.285.2.6.7.3.8.2.1.9	ColumnocCNNIFilterCgPtyData	read-write	optional	Calling party field in the filter definition. This field has any meaning only if ocCNNIFilterCgPtyPres is set to present (1).
1.3.6.1.4.1.285.2.6.7.3.8.2.1.10	ColumnocCNNIFilterCdPtyPres	read-write	optional	Indicates if a called party field is present in the filter definition.
1.3.6.1.4.1.285.2.6.7.3.8.2.1.11	ColumnocCNNIFilterCdPtyData	read-write	optional	Called party field in the filter definition. This field has any meaning only if ocCNNIFilterCdPtyPres is set to present (1).
1.3.6.1.4.1.285.2.6.7.3.8.2.1.12	ColumnocCNNIFilterStatePres	read-write	optional	Indicates if a connection phase field is present in the filter definition.
1.3.6.1.4.1.285.2.6.7.3.8.2.1.13	ColumnocCNNIFilterStateData	read-write	optional	Connection state field in the filter definition. This field has any meaning only if ocCNNIFilterStatePres is set to present (1).
1.3.6.1.4.1.285.2.6.7.3.8.3	TableocCNNISessTable	not-accessible	optional	Table containing info about session data. In order to read from this table one must first define a filter using ocCNNIFilterTable.
1.3.6.1.4.1.285.2.6.7.3.8.3.1	RowocCNNISessTableEntry	not-accessible	optional	An entry in a table containing info about session data.
1.3.6.1.4.1.285.2.6.7.3.8.3.1.1	ColumnocCNNISessID	read-only	optional	A unique session identifier.
1.3.6.1.4.1.285.2.6.7.3.8.3.1.2	ColumnocCNNISessDataType	read-only	optional	Connection type: pointtopoint (0) or pointtomultipoint (1).
1.3.6.1.4.1.285.2.6.7.3.8.3.1.3	ColumnocCNNISessDataInPort	read-only	optional	Incoming port (a port from which we received a SETUP frame that was accepted).
1.3.6.1.4.1.285.2.6.7.3.8.3.1.4	ColumnocCNNISessDataOutPort	read-only	optional	Outgoing port (a port to which we sent a SETUP frame that was accepted).
1.3.6.1.4.1.285.2.6.7.3.8.3.1.5	ColumnocCNNISessDataCgPty	read-only	optional	ATM address of a calling party.
1.3.6.1.4.1.285.2.6.7.3.8.3.1.6	ColumnocCNNISessDataCdPty	read-only	optional	ATM address of a called party.
1.3.6.1.4.1.285.2.6.7.3.8.3.1.7	ColumnocCNNISessDataState	read-only	optional	State of the connection.
1.3.6.1.4.1.285.2.6.7.4	NodeocDsx3
1.3.6.1.4.1.285.2.6.7.4.1	NodeocDsx3MIBObjs
1.3.6.1.4.1.285.2.6.7.4.1.1	TableocDsx3ConfigTable	not-accessible	mandatory	The Olicom extensions to the DS3/E3 Configuration table.
1.3.6.1.4.1.285.2.6.7.4.1.1.1	RowocDsx3ConfigEntry	not-accessible	mandatory	An entry in the DS3/E3 Configuration table.
1.3.6.1.4.1.285.2.6.7.4.1.1.1.1	ColumnocDsx3Xor55	read-write	mandatory	This tests the FIFO data path between the the ATM layer, Atomizer and PHY/TC layer. Normally this option is disabled.
1.3.6.1.4.1.285.2.6.7.4.1.1.1.2	ColumnocDsx3Scrambling	read-write	mandatory	Scrambles the cell payload using a self synchronizing scrambler with an XX^43+1. Required by ITU-T in I.432 Not used on ATMF UNI DS3 interface, but may be requ…
1.3.6.1.4.1.285.2.6.7.4.1.1.1.3	ColumnocDsx3Delineation	read-write	mandatory	Provides ATM cell delineation based on the cell HEC byte or by the PLCP direct based mapping of ATM cells into the DS3 payload envelopes. Normally PLCP delinea…
1.3.6.1.4.1.285.2.6.7.4.1.1.1.4	ColumnocDsx3HcsPassThru	read-write	mandatory	Allows cells with detected HCS errors to pass to the receive FIFO. This is ussually disabled.
1.3.6.1.4.1.285.2.6.7.4.1.1.1.5	ColumnocDsx3Ext8kRefClk	read-write	mandatory	The option selects an internal frame reference clock. When the interface is used to source line timing, this reference clock should be active. On an XLX one of…
1.3.6.1.4.1.285.2.6.7.4.1.1.1.6	ColumnocDsx3ShortCable	read-write	mandatory	If the coaxial cables attached to the DS3 interface are 225 feet or less, select the short. If length is greater than 225 feet do not select short. This select…
1.3.6.1.4.1.285.2.6.7.4.1.1.1.7	ColumnocDsx3CntHcsCorrectedErrs	read-write	mandatory	If this parameter is enabled(1) the CPPM HCS counter will count the number of correctable header checksum errors. If disabled(1) the CPPM HCS counter will coun…
1.3.6.1.4.1.285.2.6.7.4.1.2	TableocDsx3SuniPdhTable	not-accessible	mandatory	The Olicom extensions to the DS3/E3 Configuration table.
1.3.6.1.4.1.285.2.6.7.4.1.2.1	RowocDsx3SuniPdhEntry	not-accessible	mandatory	An entry in the DS3/E3 Configuration table.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.1	ColumnocDsx3SuniPmonLcv	read-only	mandatory	Represents the number of Line Code Violations since last polled.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.2	ColumnocDsx3SuniPmonFerr	read-only	mandatory	Represents the number of DS3 F and M bit errors since last polled.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.3	ColumnocDsx3SuniPmonExzs	read-only	mandatory	Represents the number of summed excessivce zeros that occured during the previous accumulation period. One or more excessive zeros occurrence withan an 85 bit …
1.3.6.1.4.1.285.2.6.7.4.1.2.1.4	ColumnocDsx3SuniPmonPeec	read-only	mandatory	Represents the number of DS3 P bits errors that have been detected since last polled.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.5	ColumnocDsx3SuniPmonPpec	read-only	mandatory	Represents the number of DS3 path parity errprs that have been detected since last polled.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.6	ColumnocDsx3SuniPmonFebeErr	read-only	mandatory	Represents the number of DS3 far end block errors that have been detected since last polled.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.7	ColumnocDsx3SuniB1Bip8Err	read-only	mandatory	Represents the number of B1 Bit-Interleaved Parity (BIP8) errors since last polled.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.8	ColumnocDsx3SuniCppmFrameErr	read-only	mandatory	Represents the number of PLCP frame errors that have occurred since last polled.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.9	ColumnocDsx3SuniCppmFebeErr	read-only	mandatory	Represent the number of PLCP Far End Block Errors since last polled.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.10	ColumnocDsx3SuniCppmHcsErr	read-only	mandatory	If the ocDsx3CntHcsCorrectedErrs is enabled this counter represents the number of correctable Header Checksum errors that have occurred since last polled. If t…
1.3.6.1.4.1.285.2.6.7.4.1.2.1.11	ColumnocDsx3SuniCppmRcvCells	read-only	mandatory	Represents the number of cells received by the PHY device since power on.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.12	ColumnocDsx3SuniCppmXmtCells	read-only	mandatory	Represents the number of cells transmitted by the PHY device since power on.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.13	ColumnocDsx3SuniCppmIdleCells	read-only	mandatory	Represents the number of received idle cells by the PHY device since power on.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.14	ColumnocDsx3SuniCppmMegaRcvCells	read-only	mandatory	Represents the millions of cells received by the PHY device since power on.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.15	ColumnocDsx3SuniCppmMegaXmtCells	read-only	mandatory	Represents the millions of cells transmitted by the PHY device since power on.
1.3.6.1.4.1.285.2.6.7.4.1.2.1.16	ColumnocDsx3SuniCppmMegaIdleCells	read-only	mandatory	Represents the millions of received idle cells by the PHY device since power on.
1.3.6.1.4.1.285.2.6.8	NodeiPortTxParityErrorTrap			The rate of cell buffer memory parity errors is above the defined threshold.
1.3.6.1.4.1.285.2.6.9	NodeePortAutoDisabled			An ATM port has been automatically disabled due to a hardware failure.
1.3.6.1.4.1.285.2.6.10	NodefeatureModuleStatusChange			Informs the management station that an expected feature module is not present, the system will operate without a feature module.
1.3.6.1.4.1.285.2.6.11	NodexModuleStatusChange			Informs the management station about a change in the state of an expansion module, e.g. when its state changes to failed, lost, disabledChanged, or disabledRep…
1.3.6.1.4.1.285.2.6.12	NodetemperatureWarningTrap			The temerature in the switch is above the defined threshold.
1.3.6.1.4.1.285.2.6.13	NodefanFailureTrap			The fan has stopped working.
1.3.6.1.4.1.285.2.6.14	NodepsuFailureTrap			A power supply has stopped working.
1.3.6.1.4.1.285.2.6.15	NodetemperatureCriticalTrap			The temperature has reached an unacceptable level. The switch will be shut down.
1.3.6.1.4.1.285.2.6.16	NodeoamFlowNoResponseTrap			An F4 or F5 OAM cell was not returned within 5 seconds.

Type Definitions

Name	Syntax	Status	Description
AtmAddress	OCTET STRING (SIZE (20))

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

Olicom-crossfireAtmSwitch-MIB

Bulk Translate

Search Vendor MIBs

Search Vendor Traps