PANDATEL-MODEM-MIB
199 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.760 | Nodepandatel | |||
| 1.3.6.1.4.1.760.1 | Nodemibs | |||
| 1.3.6.1.4.1.760.1.1 | Nodeproducts | |||
| 1.3.6.1.4.1.760.1.1.2 | Nodewan-products | |||
| 1.3.6.1.4.1.760.1.1.2.1 | Nodemdm-mgmt | |||
| 1.3.6.1.4.1.760.1.1.2.1.1 | NodemdmGroup | |||
| 1.3.6.1.4.1.760.1.1.2.1.1 | NoderackAdded | This trap will be sent when a rack is added to the managed chassis. The rack index of the new rack is sent along with this trap. | ||
| 1.3.6.1.4.1.760.1.1.2.1.1.1 | ScalarmdmInstalledRacks | read-only | mandatory | This is the number of currently installed modem racks. |
| 1.3.6.1.4.1.760.1.1.2.1.1.2 | ScalarmdmInstalledModems | read-only | mandatory | This is the number of currently installed modems |
| 1.3.6.1.4.1.760.1.1.2.1.1.3 | ScalarmdmLoopModeTraps | read-write | mandatory | This enables or disables traps generated by a Loop Mode status change at any local modem port of one of the installed modems (values: disable, enable). |
| 1.3.6.1.4.1.760.1.1.2.1.1.13 | ScalarmdmCurrentDate | read-write | mandatory | This indicate the current date as 'mm/dd/yy'. The date will be used for local management. |
| 1.3.6.1.4.1.760.1.1.2.1.1.14 | ScalarmdmCurrentTime | read-write | mandatory | This indicate the current time as 'hh:mm:ss'. The time will be used for local management. |
| 1.3.6.1.4.1.760.1.1.2.1.2 | TablemdmRackTable | not-accessible | mandatory | Table which contains information about the installed racks. |
| 1.3.6.1.4.1.760.1.1.2.1.2 | NoderackRemoved | This trap will be sent when a rack is removed from the managed chassis. The rack index of the removed rack is sent along with this trap. | ||
| 1.3.6.1.4.1.760.1.1.2.1.2.1 | RowrackEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.2.1.1 | ColumnrackRack | read-only | mandatory | The index of this particular modem rack in the stack. The index of the rack which contains the agent should have the number 1. |
| 1.3.6.1.4.1.760.1.1.2.1.2.1.2 | ColumnrackType | read-only | mandatory | This entry shows the type number of the rack. |
| 1.3.6.1.4.1.760.1.1.2.1.2.1.3 | ColumnrackDescription | read-only | mandatory | A verbal description of the modem rack. |
| 1.3.6.1.4.1.760.1.1.2.1.2.1.4 | ColumnrackModemSlots | read-only | mandatory | This entry shows the number of slots for modem cards in the rack. |
| 1.3.6.1.4.1.760.1.1.2.1.2.1.5 | ColumnrackModems | read-only | mandatory | This entry shows the number of modems currently installed in the rack. |
| 1.3.6.1.4.1.760.1.1.2.1.2.1.6 | ColumnrackPowerSupplySlots | read-only | mandatory | This entry shows the number of slots for power supplies in the rack. |
| 1.3.6.1.4.1.760.1.1.2.1.2.1.7 | ColumnrackPowerSupplies | read-only | mandatory | This entry shows the number of power supplies currently installed in the rack. |
| 1.3.6.1.4.1.760.1.1.2.1.3 | TablemdmModemTable | not-accessible | mandatory | Table which contains general information about the installed modems. |
| 1.3.6.1.4.1.760.1.1.2.1.3 | NodemodemAdded | This trap will be sent when a modem is added. The rack number and the index of the new modem is sent along with this trap. | ||
| 1.3.6.1.4.1.760.1.1.2.1.3.1 | RowmodemEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.3.1.1 | ColumnmdmRack | read-only | mandatory | The index of the rack where the modem is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.3.1.2 | ColumnmdmModem | read-only | mandatory | The index of this particular modem in the rack. The value corresponds with the slot where the modem is inserted. |
| 1.3.6.1.4.1.760.1.1.2.1.3.1.3 | ColumnmdmDescription | read-only | mandatory | A verbal description of the modem. |
| 1.3.6.1.4.1.760.1.1.2.1.3.1.4 | ColumnmdmUserName | read-write | mandatory | A verbal description of the modem which can be changed by the manager. |
| 1.3.6.1.4.1.760.1.1.2.1.3.1.5 | ColumnmdmSelfTest | read-write | mandatory | This entry enables the execution of a selftest. Write requests with values other than 'start' or 'cancel' will be rejected. The result will be found in mdmSelf… |
| 1.3.6.1.4.1.760.1.1.2.1.3.1.6 | ColumnmdmSelfTestResult | read-only | mandatory | This entry shows the result status of the last modem-dependent self test. After start, the status may change to 'running' before the first error that occured i… |
| 1.3.6.1.4.1.760.1.1.2.1.3.1.7 | ColumnmdmRemoteAccessStatus | read-only | mandatory | This entry shows the access status to the remote counterpart of the modem. The standard value depends on the device. Some remote modems are always accessible, … |
| 1.3.6.1.4.1.760.1.1.2.1.3.1.8 | ColumnmdmInterfacePorts | read-only | mandatory | This entry indicates the number of interface ports of the modem. An interface port connects an external device. |
| 1.3.6.1.4.1.760.1.1.2.1.3.1.9 | ColumnmdmLinePorts | read-only | mandatory | This entry indicates the number of line ports of the modem. A line port connects a remote modem. |
| 1.3.6.1.4.1.760.1.1.2.1.4 | TablemdmVerInfoTable | not-accessible | mandatory | Table which contains information about the installed modems' versions. |
| 1.3.6.1.4.1.760.1.1.2.1.4 | NodemodemRemoved | This trap will be sent when a modem in one of the slots is removed. The rack number and the index of the removed modem is sent along with this trap. | ||
| 1.3.6.1.4.1.760.1.1.2.1.4.1 | RowverInfoEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.4.1.1 | ColumnviRack | read-only | mandatory | The index of the rack where the modem is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.4.1.2 | ColumnviModem | read-only | mandatory | The index of this particular modem in the rack. The value corresponds with the slot where the modem is inserted. |
| 1.3.6.1.4.1.760.1.1.2.1.4.1.3 | ColumnviType | read-only | mandatory | This entry indicates the type of the modem. |
| 1.3.6.1.4.1.760.1.1.2.1.4.1.4 | ColumnviFirmwVer | read-only | mandatory | This entry indicates the firmware revision of the modem. |
| 1.3.6.1.4.1.760.1.1.2.1.4.1.5 | ColumnviUnitRel | read-only | mandatory | This entry indicates the hardware version and revision of the modem. |
| 1.3.6.1.4.1.760.1.1.2.1.4.1.6 | ColumnviArtNo | read-only | mandatory | This entry indicates the article number of the modem. |
| 1.3.6.1.4.1.760.1.1.2.1.4.1.7 | ColumnviFrontVer | read-only | mandatory | For factory purposes only. |
| 1.3.6.1.4.1.760.1.1.2.1.4.1.8 | ColumnviSerialNumber | read-only | mandatory | This entry indicates the serial number of the modem. |
| 1.3.6.1.4.1.760.1.1.2.1.5 | TablemdmPortTable | not-accessible | mandatory | Table which contains information about all ports. |
| 1.3.6.1.4.1.760.1.1.2.1.5 | NodeportLoopEnabled | This trap will be sent when a modem in one of the slots enables a Loop. The rack number, index of the modem, and port number is sent along with this trap. | ||
| 1.3.6.1.4.1.760.1.1.2.1.5.1 | RowportEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.5.1.1 | ColumnportRack | read-only | mandatory | The index of the rack where the modem to which this port belongs is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.5.1.2 | ColumnportModem | read-only | mandatory | The index of the modem to which this port belongs. |
| 1.3.6.1.4.1.760.1.1.2.1.5.1.3 | ColumnportPort | read-only | mandatory | The index of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.5.1.4 | ColumnportType | read-only | mandatory | This entry indicates the type of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.5.1.5 | ColumnportInterfaceType | read-only | mandatory | This entry indicates the type of interface of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.5.1.6 | ColumnportConnector | read-only | mandatory | This entry indicates the connector type of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.5.1.7 | ColumnportLoopMode | read-write | mandatory | This entry indicates the loop mode of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.6 | TablemdmPortSignalTable | not-accessible | mandatory | Table which contains information about all port status signals. |
| 1.3.6.1.4.1.760.1.1.2.1.6 | NodeportLoopDisabled | This trap will be sent when a modem in one of the slots disables a Loop. The rack number, index of the modem, and port number is sent along with this trap. | ||
| 1.3.6.1.4.1.760.1.1.2.1.6.1 | RowportSignalEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.6.1.1 | ColumnpsignalRack | read-only | mandatory | The index of the rack where the modem is installed to which the port belongs that provides the signal. |
| 1.3.6.1.4.1.760.1.1.2.1.6.1.2 | ColumnpsignalModem | read-only | mandatory | The index of the modem to which the port belongs that provides the signal. |
| 1.3.6.1.4.1.760.1.1.2.1.6.1.3 | ColumnpsignalPort | read-only | mandatory | The index of the port that provides the signal. |
| 1.3.6.1.4.1.760.1.1.2.1.6.1.4 | ColumnpsignalType | read-only | mandatory | This entry indicates the signal type. |
| 1.3.6.1.4.1.760.1.1.2.1.6.1.5 | ColumnpsignalStatus | read-only | mandatory | This entry indicates the current status of the signal. |
| 1.3.6.1.4.1.760.1.1.2.1.6.1.6 | ColumnpsignalTrap | read-write | mandatory | This enables or disables traps. If Trap is enabled each transition of the signal status may cause a trap portSignalStatusGood/portSignalStatusBad. |
| 1.3.6.1.4.1.760.1.1.2.1.7 | TablemdmBERTTable | not-accessible | mandatory | Table which contains information about all performable bit error rate tests. |
| 1.3.6.1.4.1.760.1.1.2.1.7 | NodeportSignalStatusGood | This will be sent when a status signal of a modem port enters the 'good' status. The rack number, index of the modem, and port number is sent along with this t… | ||
| 1.3.6.1.4.1.760.1.1.2.1.7.1 | RowbertEntry | not-accessible | mandatory | The index of thetable. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.1 | ColumnbertRack | read-only | mandatory | The index of the rack where the modem is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.2 | ColumnbertModem | read-only | mandatory | The index of this particular modem in the rack. The value corresponds with the slot where the modem is inserted. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.3 | ColumnbertPort | read-write | mandatory | The index of the port where the BER test will be performed. The modem can only perform one test at a time. The test can only be performed on a subset of ports,… |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.4 | ColumnbertBERTest | read-write | mandatory | This entry enables the execution of a BER test. Write requests with values other than 'start' or 'stop' will be rejected. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.5 | ColumnbertStatus | read-only | mandatory | This entry indicates the status of the BER test. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.6 | ColumnbertRunTime | read-only | mandatory | This entry indicates the duration of the BER test in seconds. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.7 | ColumnbertInErrorTime | read-only | mandatory | This entry shows the duration of erroneous test transmission in seconds. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.8 | ColumnbertErrorFreeTime | read-only | mandatory | This entry shows the duration of error-free test transmission in seconds. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.9 | ColumnbertKbitsRecWrapped | read-only | mandatory | This is the number the bertKbitsReceived counter has wrapped. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.10 | ColumnbertKbitsReceived | read-only | mandatory | This entry indicates the number of Kbits received during the test. When the counter wraps the bertKbitRecWrapped increases by one. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.11 | ColumnbertErrors | read-only | mandatory | This entry indicates the number of errors detected during the test. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.12 | ColumnbertSyncLosts | read-only | mandatory | This entry indicates the number of pattern sync losts detected during the test. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.13 | ColumnbertSyncStatus | read-only | mandatory | This entry indicates the current pattern sync status. |
| 1.3.6.1.4.1.760.1.1.2.1.7.1.14 | ColumnbertBitErrorRate | read-only | mandatory | This entry indicates the bit error rate. It is provided as a string in the format 'd.ddE+/-dd'. Float scanf routines are capable of interpreting the string in … |
| 1.3.6.1.4.1.760.1.1.2.1.8 | NodeportSignalStatusBad | This trap will be sent when a status signal of a modem port enters the 'bad' status. The rack number, index of the modem, and port number is sent along with th… | ||
| 1.3.6.1.4.1.760.1.1.2.1.9 | NodemdmRemoteAccess | |||
| 1.3.6.1.4.1.760.1.1.2.1.9 | NodeportBackupEnabled | This trap will be sent when a modem in one of the slots enters a backup status. The first port indicates the active data port, the second the inactive port. Th… | ||
| 1.3.6.1.4.1.760.1.1.2.1.9.3 | TableremModemTable | not-accessible | mandatory | Table which contains general information about all counterparts of the installed modems. |
| 1.3.6.1.4.1.760.1.1.2.1.9.3.1 | RowrmodemEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.9.3.1.1 | ColumnrmdmRack | read-only | mandatory | This entry indicates the index of the rack where the modem is installed that the remote modem is linked to. |
| 1.3.6.1.4.1.760.1.1.2.1.9.3.1.2 | ColumnrmdmModem | read-only | mandatory | The index of the modem that the remote modem is linked to. |
| 1.3.6.1.4.1.760.1.1.2.1.9.3.1.3 | ColumnrmdmDescription | read-only | mandatory | A verbal description of the remote modem. |
| 1.3.6.1.4.1.760.1.1.2.1.9.3.1.4 | ColumnrmdmUserName | read-write | mandatory | A verbal description of the remote modem which can be changed by the manager. |
| 1.3.6.1.4.1.760.1.1.2.1.9.3.1.5 | ColumnrmdmSelfTest | read-write | mandatory | This entry enables the execution of a selftest. Write requests with values other than 'start' or 'cancel' will be rejected. The result will be found in SelfTes… |
| 1.3.6.1.4.1.760.1.1.2.1.9.3.1.6 | ColumnrmdmSelfTestResult | read-only | mandatory | This indicates the result status of the last modem-dependent self test. After start, the status may change to 'running' before the first error that occured dis… |
| 1.3.6.1.4.1.760.1.1.2.1.9.3.1.7 | ColumnrmdmRemoteAccessStatus | read-only | mandatory | This entry shows the access status of the modem. The standard value depends on the device. Some modems are always accessible, others are not accessible or can … |
| 1.3.6.1.4.1.760.1.1.2.1.9.3.1.8 | ColumnrmdmInterfacePorts | read-only | mandatory | This entry indicates the number of interface ports of the remote modem. An interface port connects an external device. |
| 1.3.6.1.4.1.760.1.1.2.1.9.3.1.9 | ColumnrmdmLinePorts | read-only | mandatory | This entry indicates the number of line ports of the modem. A line port connects the local counterpart of the remote modem. |
| 1.3.6.1.4.1.760.1.1.2.1.9.4 | TableremVerInfoTable | not-accessible | mandatory | Table which contains information about the remote modems' versions. |
| 1.3.6.1.4.1.760.1.1.2.1.9.4.1 | RowremVerInfoEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.9.4.1.1 | ColumnrviRack | read-only | mandatory | The index of the rack where the modem is installed that the remote modem is linked to. |
| 1.3.6.1.4.1.760.1.1.2.1.9.4.1.2 | ColumnrviModem | read-only | mandatory | The index of the modem that the remote modem is linked to. |
| 1.3.6.1.4.1.760.1.1.2.1.9.4.1.3 | ColumnrviType | read-only | mandatory | This entry indicates the type of the remote modem. |
| 1.3.6.1.4.1.760.1.1.2.1.9.4.1.4 | ColumnrviFirmwVer | read-only | mandatory | This entry indicates the firmware revision of the remote modem. |
| 1.3.6.1.4.1.760.1.1.2.1.9.4.1.5 | ColumnrviUnitRel | read-only | mandatory | This entry indicates the hardware version and revision of the remote modem. |
| 1.3.6.1.4.1.760.1.1.2.1.9.4.1.6 | ColumnrviArtNo | read-only | mandatory | This entry indicates the article number of the remote modem. |
| 1.3.6.1.4.1.760.1.1.2.1.9.4.1.7 | ColumnrviFrontVer | read-only | mandatory | For factory purposes only. |
| 1.3.6.1.4.1.760.1.1.2.1.9.4.1.8 | ColumnrviSerialNumber | read-only | mandatory | This entry indicates the serial number of the remote modem. |
| 1.3.6.1.4.1.760.1.1.2.1.9.5 | TableremPortTable | not-accessible | mandatory | Table which contains information about all ports of the remote modem. |
| 1.3.6.1.4.1.760.1.1.2.1.9.5.1 | RowremPortEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.9.5.1.1 | ColumnrportRack | read-only | mandatory | The index of the rack where the local counterpart of the remote modem is installed to which this port belongs. |
| 1.3.6.1.4.1.760.1.1.2.1.9.5.1.2 | ColumnrportModem | read-only | mandatory | The index of the local counterpart of the remote modem to which this port belongs. |
| 1.3.6.1.4.1.760.1.1.2.1.9.5.1.3 | ColumnrportPort | read-only | mandatory | The index of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.9.5.1.4 | ColumnrportType | read-only | mandatory | This entry indicates the type of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.9.5.1.5 | ColumnrportInterfaceType | read-only | mandatory | This entry indicates the type of interface of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.9.5.1.6 | ColumnrportConnector | read-only | mandatory | This entry indicates the connector type of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.9.5.1.7 | ColumnrportLoopMode | read-write | mandatory | This entry indicates the loop mode of the port (remote, digital, line, off). |
| 1.3.6.1.4.1.760.1.1.2.1.9.6 | TableremPortSignalTable | not-accessible | mandatory | Table which contains information about all port status signals. |
| 1.3.6.1.4.1.760.1.1.2.1.9.6.1 | RowremPortSignalEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.9.6.1.1 | ColumnrpsignalRack | read-only | mandatory | The index of the rack where the local counterpart of the remote modem is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.9.6.1.2 | ColumnrpsignalModem | read-only | mandatory | The index of the local counterpart of the remote modem. |
| 1.3.6.1.4.1.760.1.1.2.1.9.6.1.3 | ColumnrpsignalPort | read-only | mandatory | The index of the port at the remote modem that provides the signal. |
| 1.3.6.1.4.1.760.1.1.2.1.9.6.1.4 | ColumnrpsignalType | read-only | mandatory | This entry indicates the signal type. |
| 1.3.6.1.4.1.760.1.1.2.1.9.6.1.5 | ColumnrpsignalStatus | read-only | mandatory | This entry indicates the current status of the signal. |
| 1.3.6.1.4.1.760.1.1.2.1.10 | NodemdmSpecifics | |||
| 1.3.6.1.4.1.760.1.1.2.1.10 | NodeportBackupDisabled | This trap will be sent when a modem in one of the slots leaves a backup status. The first port indicates the active data port, the second the inactive port. Th… | ||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000 | Nodemdm-oid | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1 | Nodecomp-id | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.1 | Noderack-other | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.2 | Noderack-10s-3hu | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.3 | Noderack-12s-3hu | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.4 | Noderack-10s-6hu | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.5 | Noderack-6s-9s-6hu | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.6 | Nodedevice-stack-15s | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.7 | Noderack-8s-4hu | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.8 | Noderack-10s-2c-6hu | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.9 | Nodehs-rack-10s-3hu | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.10 | Noderack-8s-2c-6hu | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.11 | Nodehs-rack-3s-1c-3hu | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.12 | Noderack-1s-1c-1hu | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.1.13 | Noderack-3s-1c-1hu | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.2 | Nodedevice-id | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.1 | NodeotherModem | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10001 | Nodecms-snmp-master | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10002 | Nodecms-slave | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10003 | Nodecms-intelligent-slave | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.10004 | Noderc-control | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.3 | Nodeslot-id | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.1 | NodemodemSlot | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.2 | NodemgmtSlot | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.3 | NodemodemAddr | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.4 | NodemgmtAddr | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.5 | NodewdmSlot | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.6 | NodecontrolSlot | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.3.10 | NodepsupplySlot | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.4 | Nodeport-id | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.1 | NodeotherPort | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.2 | NodeinterfacePort | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.3 | NodelinePort | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.4 | Nodevt100mgmtPort | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.5 | NodeoutbandmgmtPort | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.6 | NodebackupPort | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.4.7 | Noders485Port | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5 | Nodepsupply-id | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.1 | Nodeps-other | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.2 | Nodep-ac-x-5v-20a | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.3 | Nodep-ac-x-5v-30a | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.4 | Nodep-dc-48v-5v-18a | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.5 | Nodep-dc-24v-5v-15a | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.6 | Nodep-dc-48v-5v-30a | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.7 | Nodeb-ac-x-5v-6a | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.8 | Nodeb-dc-48v-5v-lc | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.9 | Nodeb-dc-48v-5v-hc | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.10 | Nodeb-dc-24v-5v-su | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.11 | Nodep-ac-x-3v-20a | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.12 | Nodep-dc-48v-5v-20a | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.13 | Nodep-dc-5v-3v-4a | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.5.14 | Nodep-dc-5v-5v-5a | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.6 | Nodepsonoff-id | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.6.1 | NodepS1-PS2-other | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.6.2 | NodepS1-on-PS2-off | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.6.3 | NodepS1-on-PS2-on | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.7 | Nodefanonoff-id | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.7.1 | NodefAN1-FAN2-other | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.7.2 | NodefAN1-off-FAN2-off | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.7.3 | NodefAN1-on-FAN2-off | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.7.4 | NodefAN1-off-FAN2-on | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.7.5 | NodefAN1-on-FAN2-on | |||
| 1.3.6.1.4.1.760.1.1.2.1.11 | NodeportBackupAvailable | This trap will be sent when a second link can be used as backup. The rack number, index of the modem, and port number is sent along with this trap. | ||
| 1.3.6.1.4.1.760.1.1.2.1.12 | NodeportBackupNotAvailable | This trap will be sent when there is no second link available as backup. The rack number, index of the modem, and port number is sent along with this trap. | ||
| 1.3.6.1.4.1.760.1.1.2.1.13 | NodeportDataPortChanged | This trap will be sent when the line port used for data transmission is changed. The first port indicates the active data port, the second the inactive port. T… | ||
| 1.3.6.1.4.1.760.1.1.2.1.20 | NodemdmMgmtIfGroup | |||
| 1.3.6.1.4.1.760.1.1.2.1.20.1 | ScalarmdmIfType | read-only | mandatory | This variable shows the agent's interface type. |
| 1.3.6.1.4.1.760.1.1.2.1.20.2 | ScalarmdmIfProtocol | read-only | mandatory | This variable shows the agent's protocol type. |
| 1.3.6.1.4.1.760.1.1.2.1.20.3 | ScalarmdmIfDataRate | read-only | mandatory | This variable shows the agent's data rate in bps. |
| 1.3.6.1.4.1.760.1.1.2.1.20.4 | ScalarmdmIfDialEnable | read-write | mandatory | This variable enables the initialization of a dial modem in case of alarm. The following variables (5 to 10) are active only if this variable is enabled. |
| 1.3.6.1.4.1.760.1.1.2.1.20.5 | ScalarmdmIfInitString | read-write | mandatory | This variable defines an init string which is generated in case of alarm to configure an external Hayes compatible modem. |
| 1.3.6.1.4.1.760.1.1.2.1.20.6 | ScalarmdmIfDialString | read-write | mandatory | This variable defines a modem command which is generated in case of alarm to dial-up a remote NMS station. If the dial string is not defined neither the init s… |
| 1.3.6.1.4.1.760.1.1.2.1.20.7 | ScalarmdmIfSendTTL | read-write | mandatory | This variable defines the TTL (time to live) in seconds. After that time the generated traps will be deleted from the buffer. If the value is '0' the traps wil… |
| 1.3.6.1.4.1.760.1.1.2.1.20.8 | ScalarmdmIfDialTimeout | read-write | mandatory | This variable defines a dial timeout for the modem in seconds. |
| 1.3.6.1.4.1.760.1.1.2.1.20.9 | ScalarmdmIfRedialPause | read-write | mandatory | This variable defines the duration of a redial pause in seconds. |
| 1.3.6.1.4.1.760.1.1.2.1.20.10 | ScalarmdmIfIdlePeriodBeforeDisconnect | read-write | mandatory | This variable defines the period of time before disconnecting in seconds. If the value is '0' the modem will remain connected. |