MIB Viewer

PCE-PCEP-DRAFT-MIB

43 objects
This MIB module defines a collection of objects for managing PCE communication protocol(PCEP).
Imported Objects
INET-ADDRESS-MIBInetAddress InetAddressPrefixLength InetAddressType InetPortNumber
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 experimental Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus StorageType TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.3.9999IdentitypcePcepDraftMIBThis MIB module defines a collection of objects for managing PCE communication protocol(PCEP).
1.3.6.1.3.9999.0NodepcePcepNotifications
1.3.6.1.3.9999.0.1NotificationpcePcepSessionUpcurrentThis notification is sent when the value of 'pcePcepSessionState' enters the 'sessionUp(1)' state.
1.3.6.1.3.9999.0.2NotificationpcePcepSessionDowncurrentThis notification is sent when the value of 'pcePcepSessionState' leaves the 'sessionUp(1)' state.
1.3.6.1.3.9999.1NodepcePcepMIBObjects
1.3.6.1.3.9999.1.1NodepcePcepClientObjects
1.3.6.1.3.9999.1.1.1ScalarpcePcepClientLastChangeread-onlycurrentThe value of sysUpTime at the time of the most recent addition or deletion of an entry to/from the pcePcepClientTable/pcePcepClientStatsTable, or the most rece…
1.3.6.1.3.9999.1.1.2ScalarpcePcepClientIndexNextread-onlycurrentThis object contains an appropriate value to be used for pcePcepClientIndex when creating entries in the pcePcepClientTable. The value 0 indicates that no unas…
1.3.6.1.3.9999.1.1.3TablepcePcepClientTablenot-accessiblecurrentThis table contains information about the PCEP Client.
1.3.6.1.3.9999.1.1.3.1RowpcePcepClientEntrynot-accessiblecurrentAn entry in this table represents a PCEP client. An entry can be created by a network administrator or by an SNMP agent as instructed by PCEP.
1.3.6.1.3.9999.1.1.3.1.1ColumnpcePcepClientPcepIdnot-accessiblecurrentThe PCEP client identifier.
1.3.6.1.3.9999.1.1.3.1.2ColumnpcePcepClientIndexnot-accessiblecurrentThis index is used to uniquely identify the PCEP client. Before creating a row in this table, the 'pcePcepClientIndexNext' object should be retrieved. That val…
1.3.6.1.3.9999.1.1.3.1.4ColumnpcePcepClientAdminStatusread-createcurrentThe administrative status of this PCEP Client. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact …
1.3.6.1.3.9999.1.1.3.1.5ColumnpcePcepClientOperStatusread-onlycurrentThe operational status of this PCEP client. The value of unknown(1) indicates that the operational status cannot be determined at this time. The value of unkno…
1.3.6.1.3.9999.1.1.3.1.6ColumnpcePcepClientTcpPortread-createcurrentThe TCP Port for PCEP. The default value is the well-known value of this port.
1.3.6.1.3.9999.1.1.3.1.7ColumnpcePcepClientKeepAliveTimerread-createcurrentThe integer value which is the proposed keep alive timer for this PCEP client.
1.3.6.1.3.9999.1.1.3.1.8ColumnpcePcepClientStorageTyperead-createcurrentThe storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row.
1.3.6.1.3.9999.1.1.3.1.9ColumnpcePcepClientRowStatusread-createcurrentThe status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Chan…
1.3.6.1.3.9999.1.1.3.1.10ColumnpcePcepClientDeadTimerread-createcurrentThe value which indicates a period of time after the expiration of which a PCEP peer declares the session down if no PCEP message has been received. The Deadti…
1.3.6.1.3.9999.1.3NodepcePcepSessionObjects
1.3.6.1.3.9999.1.3.1ScalarpcePcepPeerLastChangeread-onlycurrentThe value of sysUpTime at the time of the most recent addition or deletion to/from the pcePcepPeerTable/pcePcepSessionTable.
1.3.6.1.3.9999.1.3.2TablepcePcepPeerTablenot-accessiblecurrentInformation about PCEP peers known by Entities in the pcePcepClientTable. The information in this table is based on information from the Client-Peer interactio…
1.3.6.1.3.9999.1.3.2.1RowpcePcepPeerEntrynot-accessiblecurrentInformation about a single Peer which is related to a Session. This table is augmented by the pcePcepSessionTable.
1.3.6.1.3.9999.1.3.2.1.1ColumnpcePcepPeerPcepIdnot-accessiblecurrentThe PCEP identifier of this PCE Peer.
1.3.6.1.3.9999.1.3.2.1.2ColumnpcePcepPeerTransportAddrTyperead-onlycurrentThe type of the Internet address for the pcePcepPeerTransportAddr object. The PCEP specification describes this as being either an IPv4 Transport Address or IP…
1.3.6.1.3.9999.1.3.2.1.3ColumnpcePcepPeerTransportAddrread-onlycurrentThe Internet address advertised by the peer. The type of this address is specified by the value of the pcePcepPeerTransportAddrType object.
1.3.6.1.3.9999.1.3.3TablepcePcepSessionTablenot-accessiblecurrentA table of Sessions between PCEP clients. This table AUGMENTS the pcePcepPeerTable. Each row in this table represents a single session.
1.3.6.1.3.9999.1.3.3.1RowpcePcepSessionEntrynot-accessiblecurrentAn entry in this table represents information on a single session between two PCEP clients. The information contained in a row is read-only.
1.3.6.1.3.9999.1.3.3.1.1ColumnpcePcepSessionStateLastChangeread-onlycurrentThe value of sysUpTime at the time this Session entered its current state as denoted by the pcePcepSessionState object.
1.3.6.1.3.9999.1.3.3.1.2ColumnpcePcepSessionStateread-onlycurrentThe current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior.
1.3.6.1.3.9999.1.3.3.1.3ColumnpcePcepSessionKeepAliveHoldTimeRemread-onlycurrentThe keep alive hold time remaining for this session.
1.3.6.1.3.9999.1.3.3.1.4ColumnpcePcepSessionKeepAliveTimeread-onlycurrentThe negotiated KeepAlive Time which represents the amount of seconds between keep alive messages. The pcePcepClientKeepAliveHoldTimer related to this Session i…
1.3.6.1.3.9999.1.3.3.1.5ColumnpcePcepSessionDiscontinuityTimeread-onlycurrentThe value of sysUpTime on the most recent occasion at which any one or more of this session's counters suffered a discontinuity. The relevant counters are the …
1.3.6.1.3.9999.1.3.3.1.6ColumnpcePcepSessionSpeakerRoleread-onlycurrentThe value of this object indicates the PCEP speaker role in this session.
1.3.6.1.3.9999.1.3.4ScalarpcePcepSessionMaxread-onlycurrentThe maximum number of sessions that can be setup on this PCEP client.
1.3.6.1.3.9999.2NodepcePcepConformance
1.3.6.1.3.9999.2.1NodepcePcepGroups
1.3.6.1.3.9999.2.1.1GrouppcePcepGeneralGroupcurrentObjects that apply to all PCEP MIB implementations.
1.3.6.1.3.9999.2.1.2GrouppcePcepNotificationsGroupcurrentThe notifications for a PCEP MIB implementation.
1.3.6.1.3.9999.2.2NodepcePcepCompliances
1.3.6.1.3.9999.2.2.1CompliancepcePcepModuleFullCompliancecurrentThe Module is implemented with support for read-create and read-write. In other words, both monitoring and configuration are available when using this MODULE-C…
1.3.6.1.3.9999.2.2.2CompliancepcePcepModuleReadOnlyCompliancecurrentThe Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE.
Type Definitions
NameSyntaxStatusDescription
PcePcepIdentifierOCTET STRING (SIZE (6))currentThe LDP identifier is a six octet quantity which is used to identify a PCE client.