PEA-EQUIPMENT
116 objects
The public ethernet access software supports a number of standard and proprietary MIBs. This MIB module defines objects for reading/writing common equipment information.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex |
| PEA-SMI | pea |
| PEM-STANDARD | 733 header for the traps managedObjectClass eventTime eventTypePem managedObjectInstance perceivedSeverity probableCause sequenceNumber |
| POWER-ETHERNET-MIB | -- pethMainPseConsumptionPower -- pethPsePortDetectionStatus -- |
| RMON-MIB | -- alarmFallingThreshold -- -- alarmIndex -- alarmRisingThreshold -- alarmSampleType -- alarmValue -- alarmVariable |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.72.600.1 | IdentitypeaEquipment | The public ethernet access software supports a number of standard and proprietary MIBs. This MIB module defines objects for reading/writing common equipment in… | ||
| 1.3.6.1.4.1.193.72.600.1.1 | NodecommonObjects | |||
| 1.3.6.1.4.1.193.72.600.1.1.1 | Nodeversions | |||
| 1.3.6.1.4.1.193.72.600.1.1.1.1 | ScalarsysId | read-only | current | This value includes the full name and version identification of the node software. |
| 1.3.6.1.4.1.193.72.600.1.1.1.2 | ScalarbootSwId | read-only | current | This value includes the full name and version identification of the BOOT software. |
| 1.3.6.1.4.1.193.72.600.1.1.1.3 | ScalarcfgVer | read-write | current | The CfgVer will initially be zero, but is set to the version number defined in the configuration file received from the tftp server at system start-up. The man… |
| 1.3.6.1.4.1.193.72.600.1.1.1.4 | ScalaractiveSwInfo | read-only | current | This value represents the software version of the active software part of the node. |
| 1.3.6.1.4.1.193.72.600.1.1.1.5 | ScalarpassiveSwInfo | read-only | current | This value represents the software version of the passive software part of the node. |
| 1.3.6.1.4.1.193.72.600.1.1.2 | NodemainProcessor | |||
| 1.3.6.1.4.1.193.72.600.1.1.2.1 | ScalarprocessorLoad | read-only | current | The percentage of time that the main processor was not idle. Average over 10 seconds. (almost like hrProcessorLoad in RFC1514). |
| 1.3.6.1.4.1.193.72.600.1.1.2.2 | ScalarmemFree | read-only | current | The amount of free memory on main processor in percent. |
| 1.3.6.1.4.1.193.72.600.1.1.2.3 | ScalarmemFreeBytes | read-only | current | The amount of free memory on main processor in bytes. |
| 1.3.6.1.4.1.193.72.600.1.1.2.4 | ScalarmemBuffersUsed | read-only | current | The total number of memory buffers currently used (Ethernet, ATM & local IP-stack). |
| 1.3.6.1.4.1.193.72.600.1.1.3 | Nodetemperature | |||
| 1.3.6.1.4.1.193.72.600.1.1.3.1 | ScalartempControlState | read-only | current | The state of the temperature control can be: 0 - Low 1 - Normal 2 - High 3 - TooHigh |
| 1.3.6.1.4.1.193.72.600.1.1.3.2 | ScalartempValue | read-only | current | The temperature value in the node in deg. Celsius. |
| 1.3.6.1.4.1.193.72.600.1.1.4 | NodefansStatus | |||
| 1.3.6.1.4.1.193.72.600.1.1.4.1 | ScalargreenFanStatus | read-only | deprecated | The status of the fan which is placed closest to the green LED. For ESN310/ECN320/ECN330, green fan is the fan placed near the front. Made deprecated. Use the … |
| 1.3.6.1.4.1.193.72.600.1.1.4.2 | ScalarredFanStatus | read-only | deprecated | The status of the fan which is placed closest to the red LED. For ESN310/ECN320/ECN330, red fan is the fan placed near the rear. Made deprecated. Use the redFa… |
| 1.3.6.1.4.1.193.72.600.1.1.4.3 | ScalargreenFanSpeed | read-only | current | The speed of the fan, which is placed closest to the green LED, measured in rpm (revolutions per minute). For ESN310/ECN320/ECN330, green fan is the fan placed… |
| 1.3.6.1.4.1.193.72.600.1.1.4.4 | ScalarredFanSpeed | read-only | current | The speed of the fan, which is placed closest to the red LED, measured in rpm (revolutions per minute). For ESN310/ECN320/ECN330, red fan is the fan placed nea… |
| 1.3.6.1.4.1.193.72.600.1.1.4.5 | ScalargreenFanPerfStatus | read-only | current | The performance status of the fan which is placed closest to the green LED. For ESN310/ECN320/ECN330, green fan is the fan placed near the front. |
| 1.3.6.1.4.1.193.72.600.1.1.4.6 | ScalarredFanPerfStatus | read-only | current | The performance status of the fan which is placed closest to the red LED. For ESN310/ECN320/ECN330, red fan is the fan placed near the rear. |
| 1.3.6.1.4.1.193.72.600.1.1.5 | NodealarmFilter | |||
| 1.3.6.1.4.1.193.72.600.1.1.5.1 | ScalarcomAlarmFilter | read-write | current | This alarm filter will filter out all communication alarms with lower severity than the selected. For example: Selecting minor (1) would filter out all alarms … |
| 1.3.6.1.4.1.193.72.600.1.1.5.2 | ScalarenvAlarmFilter | read-write | current | This alarm filter will filter out all environment alarms with lower severity than the selected. For example: Selecting minor (1) would filter out all alarms wi… |
| 1.3.6.1.4.1.193.72.600.1.1.5.3 | ScalarequipAlarmFilter | read-write | current | This alarm filter will filter out all equipment alarms with lower severity than the selected. For example: Selecting minor (1) would filter out all alarms with… |
| 1.3.6.1.4.1.193.72.600.1.1.5.4 | ScalarprocessAlarmFilter | read-write | current | This alarm filter will filter out all processing alarms with lower severity than the selected. For example: Selecting minor (1) would filter out all alarms wit… |
| 1.3.6.1.4.1.193.72.600.1.1.5.5 | ScalarqosAlarmFilter | read-write | current | This alarm filter will filter out all quality alarms with lower severity than the selected. For example: Selecting minor (1) would filter out all alarms with w… |
| 1.3.6.1.4.1.193.72.600.1.1.5.6 | ScalaralarmFilterThres | read-write | obsolete | The threshold value indicates how many alarms that can be filtered by the node in the time interval indicated by the alarmFilterInterval parameter before an al… |
| 1.3.6.1.4.1.193.72.600.1.1.5.7 | ScalaralarmFilterInterval | read-write | obsolete | The value of this parameter indicates the time interval in which the node can filter a number of alarms indicated by the alarmFilterThres parameter before an a… |
| 1.3.6.1.4.1.193.72.600.1.1.6 | NodeconfigurationData | |||
| 1.3.6.1.4.1.193.72.600.1.1.6.1 | ScalarlocalMacAddr | read-only | current | Unique MAC address of the node. |
| 1.3.6.1.4.1.193.72.600.1.1.6.2 | ScalarphyMode | read-write | current | Ethernet PHY Mode setting. The Phy Mode is coded as a bitfield: * Bit 0: Auto-negotiation. If set, auto-negotiation is OFF else ON. * Bit 2: Full Duplex contro… |
| 1.3.6.1.4.1.193.72.600.1.1.6.3 | ScalarwatchDogEnable | read-only | current | Enabling of the HW Watchdog. If 0 (zero), the watchdog is OFF, else the watchdog is ON. |
| 1.3.6.1.4.1.193.72.600.1.1.6.5 | ScalarvlanId | read-write | current | The VLAN ID setting for the management VLAN. |
| 1.3.6.1.4.1.193.72.600.1.1.6.6 | ScalarvlanPrio | read-write | current | Specifies the IEEE 802.1Q priority used for the management VLAN. |
| 1.3.6.1.4.1.193.72.600.1.1.6.7 | ScalarvlanTagging | read-write | current | If 0, VLAN tagging is off, meaning that VLAN is not used. If 1, VLAN tagging is used, with the given ID and Prio. |
| 1.3.6.1.4.1.193.72.600.1.1.6.8 | ScalarbootString | read-only | current | Text commands for the bootloader. |
| 1.3.6.1.4.1.193.72.600.1.1.7 | NodeupgradeSW | |||
| 1.3.6.1.4.1.193.72.600.1.1.7.1 | ScalarswFileName | read-write | current | The filename to upload to the node. The path to this file is in the root directory that is specified in the FTP server |
| 1.3.6.1.4.1.193.72.600.1.1.7.2 | ScalaruploadSW | read-write | current | Upload new application software to device. The file which is loaded is indicated by the swFileName parameter. 1 - upload SW to the device and restart afterward… |
| 1.3.6.1.4.1.193.72.600.1.1.7.3 | ScalarbootSwFileName | read-write | current | The filename of a boot sw image located on the domain file server. This file name is used by the uploadBootSw. |
| 1.3.6.1.4.1.193.72.600.1.1.7.4 | ScalaruploadBootSw | read-write | current | Upload new boot software to this device. The boot sw image must be named by the bootSwFileName parameter and located on the domain file server, which is the ne… |
| 1.3.6.1.4.1.193.72.600.1.1.8 | ScalarhideInternalInterfaces | read-write | current | The management system can chose to hide all interfaces (RFC1233/RFC2233) that are irrelevant in the PEM network view (HP OpenView issue). If 0, Don't hide any … |
| 1.3.6.1.4.1.193.72.600.1.1.9 | Scalarrestart | read-write | current | When set to 'restart' the node restarts, which includes loading the SW image and configuration data from the server. In this way a new SW version can be loaded… |
| 1.3.6.1.4.1.193.72.600.1.1.10 | ScalarledsAltBlink | read-write | current | When the ledsAltBlink is set to ON(1) the LEDs will start to blink alternatively. |
| 1.3.6.1.4.1.193.72.600.1.1.11 | ScalarstartCfgVerification | read-write | current | When startCfgVerification is set to verify(1) the node makes a DHCP renew and retrieves the configuration file from the address of the server just received fro… |
| 1.3.6.1.4.1.193.72.600.1.1.12 | ScalarsaveCfgToNvm | read-write | current | When saveCfgToNvm is set to start(1) the device saves the configuration data parameters to NVM. Using GET command the current (inProgress) or last known state … |
| 1.3.6.1.4.1.193.72.600.1.1.13 | ScalarcfgVerificationInterval | read-write | current | This is the time in minutes between configuration file verification. If the value is zero the configuration verification is disabled. |
| 1.3.6.1.4.1.193.72.600.1.1.14 | ScalarnotifyType | read-write | current | Set the type of the notify sent by the node: 1. Trap 2. Inform |
| 1.3.6.1.4.1.193.72.600.1.1.15 | NodeidentificationData | |||
| 1.3.6.1.4.1.193.72.600.1.1.15.1 | NodedeviceIdData | |||
| 1.3.6.1.4.1.193.72.600.1.1.15.1.1 | ScalarproductNumber | read-only | current | Index number that identifies the node. |
| 1.3.6.1.4.1.193.72.600.1.1.15.1.2 | ScalarrevisionState | read-only | current | Revision State or 'R-state' declaring minor versions. For example: different types of components or new boot SW. |
| 1.3.6.1.4.1.193.72.600.1.1.15.1.3 | ScalarfunctionDesignation | read-only | current | Number with reference to the handling and use of the product. |
| 1.3.6.1.4.1.193.72.600.1.1.15.1.4 | ScalardateOfProduction | read-only | current | Manufacturing date, describing when the unit has been manufactured, in terms of a year, month and a day, as described below: Year code(0000 ..9999) - 2 bytes (… |
| 1.3.6.1.4.1.193.72.600.1.1.15.1.5 | ScalardateOfRepair | read-only | current | Repair date, declaring the year, month and day of the latest repair. The format is described below: Year code(0000 ..9999) - 2 bytes (LSB,MSB) Month (1..12)- 1… |
| 1.3.6.1.4.1.193.72.600.1.1.15.1.6 | ScalarproductionSerialNumber | read-only | current | Unique serial number, describing the product in terms of a manufacturing site code and a sequence number. |
| 1.3.6.1.4.1.193.72.600.1.1.15.1.7 | ScalarlayoutVersionCode | read-only | current | The data layout version that allows the possibility to interpret stored data differently. |
| 1.3.6.1.4.1.193.72.600.1.1.15.1.8 | ScalaridCheckSum | read-only | current | CRC32 Checksum of identification data structure of the node. |
| 1.3.6.1.4.1.193.72.600.1.1.15.2 | NodemicroProcessorIdData | |||
| 1.3.6.1.4.1.193.72.600.1.1.15.2.1 | ScalarproductNumberMicroProcessor | read-only | current | Index number that identifies the MicroProcessor board. |
| 1.3.6.1.4.1.193.72.600.1.1.15.2.2 | ScalarrevisionStateMicroProcessor | read-only | current | Revision State or 'R-state' declaring minor versions. For example: different types of components or new boot SW. |
| 1.3.6.1.4.1.193.72.600.1.1.15.2.3 | ScalarfunctionDesignationMicroProcessor | read-only | current | Number with reference to the handling and use of the product. |
| 1.3.6.1.4.1.193.72.600.1.1.15.2.4 | ScalardateOfProductionMicroProcessor | read-only | current | Manufacturing date, describing when the unit has been manufactured, in terms of a year, month and a day, as described below: Year code(0000 ..9999) - 2 bytes (… |
| 1.3.6.1.4.1.193.72.600.1.1.15.2.5 | ScalardateOfRepairMicroProcessor | read-only | current | Repair date, declaring the year, month and day of the latest repair. The format is described below: Year code(0000 ..9999) - 2 bytes (LSB,MSB) Month (1..12)- 1… |
| 1.3.6.1.4.1.193.72.600.1.1.15.2.6 | ScalarproductionSerialNumberMicroProcessor | read-only | current | Unique serial number, describing the product in terms of a manufacturing site code and a sequence number. |
| 1.3.6.1.4.1.193.72.600.1.1.15.2.7 | ScalarlayoutVersionCodeMicroProcessor | read-only | current | The data layout version that allows the possibility to interpret stored data differently. |
| 1.3.6.1.4.1.193.72.600.1.1.15.2.8 | ScalaridCheckSumMicroProcessor | read-only | current | CRC32 Checksum of identification data structure for the MicroProcessor board. |
| 1.3.6.1.4.1.193.72.600.1.1.15.3 | NodeanalogueFrontEndIdData | |||
| 1.3.6.1.4.1.193.72.600.1.1.15.3.1 | ScalarproductNumberAnalogueFrontEnd | read-only | current | Index number that identifies the AFE board. |
| 1.3.6.1.4.1.193.72.600.1.1.15.3.2 | ScalarrevisionStateAnalogueFrontEnd | read-only | current | Revision State or 'R-state' declaring minor versions. For example: different types of components or new boot SW. |
| 1.3.6.1.4.1.193.72.600.1.1.15.3.3 | ScalarfunctionDesignationAnalogueFrontEnd | read-only | current | Number with reference to the handling and use of the product. |
| 1.3.6.1.4.1.193.72.600.1.1.15.3.4 | ScalardateOfProductionAnalogueFrontEnd | read-only | current | Manufacturing date, describing when the unit has been manufactured, in terms of a year, month and a day, as described below: Year code(0000 ..9999) - 2 bytes (… |
| 1.3.6.1.4.1.193.72.600.1.1.15.3.5 | ScalardateOfRepairAnalogueFrontEnd | read-only | current | Repair date, declaring the year, month and day of the latest repair. The format is described below: Year code(0000 ..9999) - 2 bytes (LSB,MSB) Month (1..12)- 1… |
| 1.3.6.1.4.1.193.72.600.1.1.15.3.6 | ScalarproductionSerialNumberAnalogueFrontEnd | read-only | current | Unique serial number, describing the product in terms of a manufacturing site code and a sequence number. |
| 1.3.6.1.4.1.193.72.600.1.1.15.3.7 | ScalarlayoutVersionCodeAnalogueFrontEnd | read-only | current | The data layout version that allows the possibility to interpret stored data differently. |
| 1.3.6.1.4.1.193.72.600.1.1.15.3.8 | ScalaridCheckSumAnalogueFrontEnd | read-only | current | CRC32 Checksum of identification data structure for the Analogue Front End board. |
| 1.3.6.1.4.1.193.72.600.1.1.15.4 | NodedcDcConverterIdData | |||
| 1.3.6.1.4.1.193.72.600.1.1.15.4.1 | ScalarproductNumberDcDcConverter | read-only | current | Index number that identifies the DC-DC Converter board. |
| 1.3.6.1.4.1.193.72.600.1.1.15.4.2 | ScalarrevisionStateDcDcConverter | read-only | current | Revision State or 'R-state' declaring minor versions. For example: different types of components or new boot SW. |
| 1.3.6.1.4.1.193.72.600.1.1.15.4.3 | ScalarfunctionDesignationDcDcConverter | read-only | current | Number with reference to the handling and use of the product. |
| 1.3.6.1.4.1.193.72.600.1.1.15.4.4 | ScalardateOfProductionDcDcConverter | read-only | current | Manufacturing date, describing when the unit has been manufactured, in terms of a year, month and a day, as described below: Year code(0000 ..9999) - 2 bytes (… |
| 1.3.6.1.4.1.193.72.600.1.1.15.4.5 | ScalardateOfRepairDcDcConverter | read-only | current | Repair date, declaring the year, month and day of the latest repair. The format is described below: Year code(0000 ..9999) - 2 bytes (LSB,MSB) Month (1..12)- 1… |
| 1.3.6.1.4.1.193.72.600.1.1.15.4.6 | ScalarproductionSerialNumberDcDcConverter | read-only | current | Unique serial number, describing the product in terms of a manufacturing site code and a sequence number. |
| 1.3.6.1.4.1.193.72.600.1.1.15.4.7 | ScalarlayoutVersionCodeDcDcConverter | read-only | current | The data layout version that allows the possibility to interpret stored data differently. |
| 1.3.6.1.4.1.193.72.600.1.1.15.4.8 | ScalaridCheckSumDcDcConverter | read-only | current | CRC32 Checksum of identification data for the DC-DC Converter board. |
| 1.3.6.1.4.1.193.72.600.1.1.16 | ScalarsntpServerIP | read-write | current | The IP address of SNTP server used for time synchronization. |
| 1.3.6.1.4.1.193.72.600.1.1.17 | ScalarsnmpKeepAliveTimerTime | read-write | current | The interval between SNMP KeepAlive checks. |
| 1.3.6.1.4.1.193.72.600.1.1.18 | ScalarallowBroadcastToDux | read-write | current | Enables/disables broadcast to DUX (broadcast beacons). When the IP DSLAM is restarted one broadcast to DUX is always sent, hereafter allowBroadcastToDux determ… |
| 1.3.6.1.4.1.193.72.600.1.1.20 | NodepeaMultilink | |||
| 1.3.6.1.4.1.193.72.600.1.1.20.1 | ScalarpeaMultilinkMode | read-write | current | This defines the mode the multiple network-side links operate in. singleLink(1) - only one link is used for active data transfer. This is the only possible val… |
| 1.3.6.1.4.1.193.72.600.1.1.20.2 | ScalarpeaMultilinkPreferredInterface | read-only | current | Shows the index of the interface (link) selected for traffic forwarding whenever there is no other explicit indication on which one to choose. The interface is… |
| 1.3.6.1.4.1.193.72.600.1.1.20.3 | TablepeaMultilinkInterfaceTable | not-accessible | current | This is a table of interfaces (links) on the network-side. The table is indexed by the same interface numbers as used in the IF-MIB (1-based). |
| 1.3.6.1.4.1.193.72.600.1.1.20.3.1 | RowpeaMultilinkInterfaceEntry | not-accessible | current | This is an entry of the multilinkInterfaceTable |
| 1.3.6.1.4.1.193.72.600.1.1.20.3.1.1 | ColumnpeaMultilinkInterfaceIndex | not-accessible | current | This is the index to the multilinkInterfaceTable. The values are the same as used in the IF-MIB (1-based). |
| 1.3.6.1.4.1.193.72.600.1.1.20.3.1.2 | ColumnpeaMultilinkIsForwarding | read-only | current | This shows if the corresponding interface (link) is forwarding traffic - true(1) or not - false(2). An interface that is not forwarding may still carry some se… |
| 1.3.6.1.4.1.193.72.600.1.1.20.3.1.3 | ColumnpeaMultilinkIsUp | read-only | current | This shows if the corresponding interface (link) is up true(1) or down - false(2). The true(1) value is returned if the ifOperState of the corresponding port i… |
| 1.3.6.1.4.1.193.72.600.1.1.20.4 | ScalarpeaMultilinkForceManagementToUsePreferredInterface | read-write | current | Setting this value to 'enabled (1)' forces the management traffic to be sent on the interface towards the Active ECN thereby overruling the RSTP protocol for m… |
| 1.3.6.1.4.1.193.72.600.1.1.21 | ScalarcomboConnector | read-only | current | Tell if a combo connector is mounted for this board. |
| 1.3.6.1.4.1.193.72.600.1.1.22 | ScalarblockUnit | read-write | current | Block this unit. When blocked: - no user traffic is carried out - no alarms are issued - it does not allow any configuration Getting a card out of blocked stat… |
| 1.3.6.1.4.1.193.72.600.1.2 | NodecommonTraps | |||
| 1.3.6.1.4.1.193.72.600.1.2.0 | Nodetraps | |||
| 1.3.6.1.4.1.193.72.600.1.2.1 | NodetrapsParameters | |||
| 1.3.6.1.4.1.193.72.600.1.5 | NodeifObjects | |||
| 1.3.6.1.4.1.193.72.600.1.6 | NodeifNotifications | |||
| 1.3.6.1.4.1.193.72.600.1.6.0 | NodeifNotificationTypes | |||
| 1.3.6.1.4.1.193.72.600.1.7 | NodepeaEquipmentMibGroups | |||
| 1.3.6.1.4.1.193.72.600.1.8 | Nodesnmpv2Notifications | |||
| 1.3.6.1.4.1.193.72.600.1.8.0 | Nodesnmpv2NotificationsTypes | |||
| 1.3.6.1.4.1.193.72.600.1.9 | NodebridgeNotifications | |||
| 1.3.6.1.4.1.193.72.600.1.9.0 | NodebridgeNotificationsTypes | |||
| 1.3.6.1.4.1.193.72.600.1.10 | NodermonNotifications | |||
| 1.3.6.1.4.1.193.72.600.1.10.0 | NodermonNotificationsTypes |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PhyModeType | OCTET STRING (SIZE (1)) | current | Represent the Ethernet PHY Mode. |