PEA-EQUIPMENT-FELX
54 objects
The public ethernet access software supports a number of standard and proprietary MIBs. This MIB module defines objects specific to FELX switch.
Imported Objects
| IF-MIB | InterfaceIndex |
| PEA-FELX-SMI | peaFelx |
| PEA-POWER-ETHERNET-MIB | pethPsePortGroupIndex pethPsePortIndex |
| PEM-STANDARD | 733 header for notifications managedObjectClass eventTime eventTypePem managedObjectInstance perceivedSeverity probableCause sequenceNumber |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.72.800.10 | IdentitypeaEquipmentFelx | The public ethernet access software supports a number of standard and proprietary MIBs. This MIB module defines objects specific to FELX switch. | ||
| 1.3.6.1.4.1.193.72.800.10.1 | NodefelxObjects | |||
| 1.3.6.1.4.1.193.72.800.10.1.1 | NodeidData | |||
| 1.3.6.1.4.1.193.72.800.10.1.1.2 | NodesupBoardIdData | |||
| 1.3.6.1.4.1.193.72.800.10.1.1.2.1 | ScalarproductNumberSup | read-only | current | Index number that identifies the device. |
| 1.3.6.1.4.1.193.72.800.10.1.1.2.2 | ScalarrevisionStateSup | read-only | current | Revision State or 'R-state' declaring minor versions. E.g. different types of components or new boot SW. |
| 1.3.6.1.4.1.193.72.800.10.1.1.2.3 | ScalarfunctionDesignationSup | read-only | current | Number with reference to the handling and use of the product. |
| 1.3.6.1.4.1.193.72.800.10.1.1.2.4 | ScalardateOfProductionSup | read-only | current | Manufacturing date, describing when the unit has been manufactured, in terms of a year, month and a day, as described below: Year code(0000 ..9999) - 2 bytes (… |
| 1.3.6.1.4.1.193.72.800.10.1.1.2.5 | ScalardateOfRepairSup | read-only | current | Repair date, declaring the year, month and day of the latest repair. The format is described below: Year code(0000 ..9999) - 2 bytes (LSB,MSB) Month (1..12)- 1… |
| 1.3.6.1.4.1.193.72.800.10.1.1.2.6 | ScalarproductionSerialNumberSup | read-only | current | Unique serial number, describing the product in terms of a manufacturing site code and a sequence number. |
| 1.3.6.1.4.1.193.72.800.10.1.1.2.7 | ScalarlayoutVersionCodeSup | read-only | current | The data layout version that allows the possibility to interpret stored data differently. |
| 1.3.6.1.4.1.193.72.800.10.1.1.2.8 | ScalaridCheckSumSup | read-only | current | CRC32 Checksum of identification data structure of the device. |
| 1.3.6.1.4.1.193.72.800.10.1.1.3 | NodeddcBoardIdData | |||
| 1.3.6.1.4.1.193.72.800.10.1.1.3.1 | ScalarproductNumberDdc | read-only | current | Index number that identifies the device. |
| 1.3.6.1.4.1.193.72.800.10.1.1.3.2 | ScalarrevisionStateDdc | read-only | current | Revision State or 'R-state' declaring minor versions. E.g. different types of components or new boot SW. |
| 1.3.6.1.4.1.193.72.800.10.1.1.3.3 | ScalarfunctionDesignationDdc | read-only | current | Number with reference to the handling and use of the product. |
| 1.3.6.1.4.1.193.72.800.10.1.1.3.4 | ScalardateOfProductionDdc | read-only | current | Manufacturing date, describing when the unit has been manufactured, in terms of a year, month and a day, as described below: Year code(0000 ..9999) - 2 bytes (… |
| 1.3.6.1.4.1.193.72.800.10.1.1.3.5 | ScalardateOfRepairDdc | read-only | current | Repair date, declaring the year, month and day of the latest repair. The format is described below: Year code(0000 ..9999) - 2 bytes (LSB,MSB) Month (1..12)- 1… |
| 1.3.6.1.4.1.193.72.800.10.1.1.3.6 | ScalarproductionSerialNumberDdc | read-only | current | Unique serial number, describing the product in terms of a manufacturing site code and a sequence number |
| 1.3.6.1.4.1.193.72.800.10.1.1.3.7 | ScalarlayoutVersionCodeDdc | read-only | current | The data layout version that allows the possibility to interpret stored data differently. |
| 1.3.6.1.4.1.193.72.800.10.1.1.3.8 | ScalaridCheckSumDdc | read-only | current | CRC32 Checksum of identification data structure of the device. |
| 1.3.6.1.4.1.193.72.800.10.3 | NodeifObjects | |||
| 1.3.6.1.4.1.193.72.800.10.3.1 | TableifTrafficForwardingTable | not-accessible | current | This is a symmetrical two-dimentional matrix indexed by the same interface numbers in both directions (ifIndex from IF-MIB). Every element of the matrix is a b… |
| 1.3.6.1.4.1.193.72.800.10.3.1.1 | RowifTrafficForwardingEntry | not-accessible | current | This is an entry of the ifTrafficForwardingTable. |
| 1.3.6.1.4.1.193.72.800.10.3.1.1.1 | ColumnifIndexIngress | not-accessible | current | This represents an ingress interface used in ifTrafficForwardingTable as the first index. All values of this index should coincide with the values of the ifInd… |
| 1.3.6.1.4.1.193.72.800.10.3.1.1.2 | ColumnifIndexEgress | not-accessible | current | This represents an egress interface used in ifTrafficForwardingTable as the second index. All values of this index should coincide with the values of the ifInd… |
| 1.3.6.1.4.1.193.72.800.10.3.1.1.3 | ColumnifTrafficForwardingEnable | read-write | current | This defines if traffic forwarding from the corresponding ingress interface to the corresponding egress interface is enabled. The value of true(1) enables traf… |
| 1.3.6.1.4.1.193.72.800.10.3.2 | ScalarifBandwidthMeasurementPeriod | read-write | current | The bandwidth threshold function is used to monitor the average bandwidth over the ifBandwidthMeasurementPeriod on each of the device's external interfaces. If… |
| 1.3.6.1.4.1.193.72.800.10.3.3 | ScalarifBandwidthUsageThreshold | read-write | current | The bandwidth threshold function is used to monitor the average bandwidth over the ifBandwidthMeasurementPeriod on each of the device's external interfaces. If… |
| 1.3.6.1.4.1.193.72.800.10.3.5 | TableifFlowControlTable | not-accessible | current | This is to enable/disable the flow control function. The parameter can be changed per interface (hence the table). |
| 1.3.6.1.4.1.193.72.800.10.3.5.1 | RowifFlowControlEntry | not-accessible | current | This is an entry of the ifFlowContorlTable. |
| 1.3.6.1.4.1.193.72.800.10.3.5.1.1 | ColumnifFlowControlIndex | not-accessible | current | This is an index to the ifFlowControlTable. All values of this index should coincide with the values of the ifIndex in the ifTable of the IF-MIB. |
| 1.3.6.1.4.1.193.72.800.10.3.5.1.2 | ColumnifFlowControlEnable | read-write | current | This defines if the flow control function is enabled on the particular interface.The value of true(1) enables flow control. The value of false(2) disables flow… |
| 1.3.6.1.4.1.193.72.800.10.3.6 | ScalarifManagementInterfaceIndex | read-only | current | This is an index of the interface the management traffic is forwarded through. The value is for information only (there are cases, such as when the traffic is … |
| 1.3.6.1.4.1.193.72.800.10.4 | NodeifNotifications | |||
| 1.3.6.1.4.1.193.72.800.10.4.0 | NodeifNotificationTypes | |||
| 1.3.6.1.4.1.193.72.800.10.4.0.1 | NotificationifBandwidthUsageThresholdNotification | current | The bandwidth threshold function is used to monitor the average bandwidth over the ifBandwidthMeasurementPeriod on each of the device's external interfaces. If… | |
| 1.3.6.1.4.1.193.72.800.10.4.0.2 | NotificationifBandwidthUsageThresholdCeasingNotification | current | The CEASING counterpart of ifBandwidthUsageThresholdNotification. Valid from: EDA 1.3 R2A Parameters 1: Managed object class ESN108 2: Managed object ID [MAC +… | |
| 1.3.6.1.4.1.193.72.800.10.4.1 | NodeifNotificationParameters | |||
| 1.3.6.1.4.1.193.72.800.10.4.1.1 | ScalardirectionMask | accessible-for-notify | current | A general variable for direction: IN, OUT or BOTH. |
| 1.3.6.1.4.1.193.72.800.10.5 | Nodedot1pObjects | |||
| 1.3.6.1.4.1.193.72.800.10.5.1 | Scalardot1pQueuePriorityBarrier | read-write | current | This defines the lowest possible priority (802.1p) a packet should have to be placed in the HIGH PRIORITY queue. If the packet's priority is yet lower than thi… |
| 1.3.6.1.4.1.193.72.800.10.5.2 | Scalardot1pQoSEnable | read-write | current | This enables a separate handling of priority packets (802.1p). When enabled, the packets with priority equal or higher than the value of dot1pQueuePriorityBarr… |
| 1.3.6.1.4.1.193.72.800.10.9 | NodetmsCommonObjects | |||
| 1.3.6.1.4.1.193.72.800.10.9.6 | NodetmsCommonMisc | |||
| 1.3.6.1.4.1.193.72.800.10.9.6.3 | ScalartmsCommonMiscSpanOnOff | read-write | current | THIS IS AN ALIAS FOR THE CORRESPONDING OBJECT FROM THE TMSCOMMON.MIB Enable/Disable Spanning Tree for the bridge. When 'disable(2)', all ports of the device ar… |
| 1.3.6.1.4.1.193.72.800.10.9.8 | NodetmsCommonIgmpSnoop | |||
| 1.3.6.1.4.1.193.72.800.10.9.8.1 | ScalartmsCommonIgmpSnoopEnabled | read-write | current | THIS IS AN ALIAS FOR THE CORRESPONDING OBJECT FROM THE TMSCOMMON.MIB Setting this object to true(1) enables IGMP Snooping. Setting it to false(2) disables IGMP… |
| 1.3.6.1.4.1.193.72.800.10.11 | Nodedot3Objects | |||
| 1.3.6.1.4.1.193.72.800.10.11.1 | Tabledot3PhyModeTable | not-accessible | current | This is to modify the duplex mode and speed for each port. This is an extension to RFC2665. |
| 1.3.6.1.4.1.193.72.800.10.11.1.1 | Rowdot3PhyModeEntry | not-accessible | current | This is an entry in the dot3PhyModeTable |
| 1.3.6.1.4.1.193.72.800.10.11.1.1.1 | Columndot3PhyModeIndex | not-accessible | current | This is an index to the dot3PhyModeTable. The indices are 1-based. |
| 1.3.6.1.4.1.193.72.800.10.11.1.1.2 | Columndot3PhyMode | read-write | current | This describes the duplex mode and speed for each port. This is an extension to RFC2665 where the duplex status and interface speed can be modifed for each por… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DateType | OCTET STRING (SIZE (4)) | current | Represents a date: Year code(0000 ..9999) - 2 bytes (LSB,MSB) Month (1..12)- 1 byte Day (1 ..31)- 1 byte. For example, Wednesday June 12, 2002 would be displayed as: h'02, h'14, h'06, h'0C. |