MIB Viewer

PEPLINK-BALANCE-MIB

54 objects
MIB module for Peplink Balance.
Imported Objects
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks
SNMPv2-TCTEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.23695.1IdentitypeplinkBalanceMIB module for Peplink Balance.
1.3.6.1.4.1.23695.1.1NodebalanceStatus
1.3.6.1.4.1.23695.1.1.1NodebalanceSystem
1.3.6.1.4.1.23695.1.1.1.1ScalarbalFirmwareread-onlycurrentBalance firmware version.
1.3.6.1.4.1.23695.1.1.1.2ScalarbalSerialNumberread-onlycurrentBalance serial number.
1.3.6.1.4.1.23695.1.1.1.3ScalarbalTimeread-onlycurrentBalance system time.
1.3.6.1.4.1.23695.1.1.1.4ScalarbalUpTimeread-onlycurrentBalance up time (in hundredths of a second) since the system was last re-initialized.
1.3.6.1.4.1.23695.1.1.1.6NodebalanceLan
1.3.6.1.4.1.23695.1.1.1.6.1ScalarbalLanStatusread-onlycurrentBalance LAN status (up/down).
1.3.6.1.4.1.23695.1.1.1.6.2ScalarbalLanIpread-onlycurrentBalance LAN IP address.
1.3.6.1.4.1.23695.1.1.1.6.3ScalarbalLanSubnetMaskread-onlycurrentBalance LAN sub-net mask.
1.3.6.1.4.1.23695.1.1.2NodebalLinkStatus
1.3.6.1.4.1.23695.1.1.2.1ScalarbalLinkNumberread-onlycurrentThe number of network interfaces (regardless of their current state) present on this system.
1.3.6.1.4.1.23695.1.1.2.2TablelinkTablenot-accessiblecurrentA list of link status.
1.3.6.1.4.1.23695.1.1.2.2.1RowlinkEntrynot-accessiblecurrentAn entry containing management information applicable to a particular interface.
1.3.6.1.4.1.23695.1.1.2.2.1.1ColumnlinkConnNumnot-accessiblecurrentVirtual WAN index number (1-based, unique).
1.3.6.1.4.1.23695.1.1.2.2.1.2ColumnlinkNameread-onlycurrentBalance link status (connecting/connected/link down).
1.3.6.1.4.1.23695.1.1.2.2.1.3ColumnlinkStatusread-onlycurrentBalance link status (connecting/connected/link down).
1.3.6.1.4.1.23695.1.1.2.2.1.4ColumnlinkThroughputInread-onlycurrentThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.23695.1.1.2.2.1.5ColumnlinkThroughputOutread-onlycurrentThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso…
1.3.6.1.4.1.23695.1.1.2.2.1.6ColumnlinkDataTransferredread-onlycurrentThe numbe of bytes transferred through.
1.3.6.1.4.1.23695.1.1.2.3TablelinkIpTablenot-accessiblecurrentA list of link status.
1.3.6.1.4.1.23695.1.1.2.3.1RowlinkIpEntrynot-accessiblecurrentAn entry containing management information applicable to a particular interface.
1.3.6.1.4.1.23695.1.1.2.3.1.1ColumnlinkIpConnNumnot-accessiblecurrentVirtual WAN index number.
1.3.6.1.4.1.23695.1.1.2.3.1.2ColumnlinkIpIndexnot-accessiblecurrentVirtual WAN index number.
1.3.6.1.4.1.23695.1.1.2.3.1.3ColumnlinkIpread-onlycurrentBalance link IP address list.
1.3.6.1.4.1.23695.1.1.3TablewanUsageTablenot-accessiblecurrentA list of interface entries.
1.3.6.1.4.1.23695.1.1.3.1RowwanUsageEntrynot-accessiblecurrentAn entry containing management information applicable to a particular interface.
1.3.6.1.4.1.23695.1.1.3.1.1ColumnwanUsageIndexnot-accessiblecurrentPhysical WAN index number.
1.3.6.1.4.1.23695.1.1.3.1.2ColumnwanUsageThroughputInread-onlycurrentThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.23695.1.1.3.1.3ColumnwanUsageThroughputOutread-onlycurrentThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso…
1.3.6.1.4.1.23695.1.1.3.1.4ColumnwanUsageDataTransferredread-onlycurrentThe numbe of bytes transferred through.
1.3.6.1.4.1.23695.1.2NodebalanceMaintenance
1.3.6.1.4.1.23695.1.2.1ScalarbalRebootread-writecurrentReboot the Balance. Write 'enable' to take effect.
1.3.6.1.4.1.23695.1.3NodebalanceLanConfig
1.3.6.1.4.1.23695.1.3.1ScalarportLanSpeedConfigread-writecurrentSet Balance LAN port speed (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.
1.3.6.1.4.1.23695.1.3.2TableportWanSpeedConfigTablenot-accessiblecurrentA list of interface entries.
1.3.6.1.4.1.23695.1.3.2.1RowportWanSpeedConfigEntrynot-accessiblecurrentAn entry containing management information applicable to a particular interface.
1.3.6.1.4.1.23695.1.3.2.1.1ColumnportWanSpeedConfigIndexnot-accessiblecurrentPhysical LAN/WAN port name.
1.3.6.1.4.1.23695.1.3.2.1.2ColumnportWanSpeedConfigread-writecurrentSet Balance WAN port speed (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.
1.3.6.1.4.1.23695.1.3.3ScalarlanConfigIpread-writecurrentSet Balance LAN IP address.
1.3.6.1.4.1.23695.1.3.4ScalarlanConfigSubnetMaskread-writecurrentSet Balance LAN sub-net mask.
1.3.6.1.4.1.23695.1.50NodebalanceConformance
1.3.6.1.4.1.23695.1.50.1NodebalCompliances
1.3.6.1.4.1.23695.1.50.1.1CompliancebalCompliancecurrentBalance compliance groups.
1.3.6.1.4.1.23695.1.50.2NodebalGroups
1.3.6.1.4.1.23695.1.50.2.1GroupbalSystemGroupcurrentBalance system status group.
1.3.6.1.4.1.23695.1.50.2.2GroupbalLinkGroupcurrentBalance system status group.
1.3.6.1.4.1.23695.1.50.2.3GroupbalWanGroupcurrentBalance system status group.
1.3.6.1.4.1.23695.1.50.2.4GroupbalSetGroupcurrentBalance system status group.
Type Definitions
NameSyntaxStatusDescription
ConnectionNumInteger32 (1..2147483647)currentA unique value, greater than zero, for each WAN connection number.
NameStringOCTET STRING (SIZE (0..80))currentBalance name string.
PortSpeedTypeINTEGER { unknown(0), auto(1), fullDulplex10(2), halfDulplex10(3), fullDulplex100(4), halfDulplex100(5), fullDulplex1000(6), halfDulplex1000(7) }currentDescribe the port speed and type.
TableIndexInteger32 (1..2147483647)currentA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must re…