PNETMOD-MIB
32 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27533 | Nodebke | |||
| 1.3.6.1.4.1.27533.5 | NodepnetMod | |||
| 1.3.6.1.4.1.27533.5.1 | Nodegrid | |||
| 1.3.6.1.4.1.27533.5.1 | NodetsTrapAlarmStart | This trap is sent each time an alarm is inserted into the alarm table. | ||
| 1.3.6.1.4.1.27533.5.1.1 | ScalargridState | read-only | current | Grid State Ok/Fail value |
| 1.3.6.1.4.1.27533.5.1.2 | ScalargridFuse | read-only | current | Grid Fuse Ok/Fail value |
| 1.3.6.1.4.1.27533.5.2 | NodepowerSource | |||
| 1.3.6.1.4.1.27533.5.2 | NodetsTrapAlarmEnd | This trap is sent each time an alarm is removed from the alarm table. | ||
| 1.3.6.1.4.1.27533.5.2.1 | ScalarpowerSourceState | read-only | current | Power Source State Ok/Fail value |
| 1.3.6.1.4.1.27533.5.2.2 | ScalarpowerSourceCurrent | read-only | current | Power Source Current value XXXX divide by 10 to get XXX.X |
| 1.3.6.1.4.1.27533.5.3 | Nodeaccumulator | |||
| 1.3.6.1.4.1.27533.5.3.1 | ScalaraccuVoltage | read-only | current | Accumulator Voltage value XXXX divide by 10 to get XXX.X |
| 1.3.6.1.4.1.27533.5.3.2 | ScalaraccuCurrent | read-only | current | Accumulator Current value XXXX divide by 10 to get XXX.X |
| 1.3.6.1.4.1.27533.5.3.3 | ScalaraccuTemperature | read-only | current | Accumulator Temperature value -XXX divide by 10 to get -XX.X |
| 1.3.6.1.4.1.27533.5.3.4 | ScalaraccuFuse | read-only | current | Accumulator Fuse Ok/Fail value |
| 1.3.6.1.4.1.27533.5.4 | Nodeoutput | |||
| 1.3.6.1.4.1.27533.5.4.1 | ScalaroutFuse | read-only | current | Output Fuse Ok/Fail value |
| 1.3.6.1.4.1.27533.5.4.2 | ScalaroutState | read-write | current | Output State On/Off value |
| 1.3.6.1.4.1.27533.5.10 | Nodealarms | |||
| 1.3.6.1.4.1.27533.5.10.1 | TablealarmTable | not-accessible | current | A list of input entries. |
| 1.3.6.1.4.1.27533.5.10.1.1 | RowalarmEntry | not-accessible | current | An entry containing information applicable to a particular input. |
| 1.3.6.1.4.1.27533.5.10.1.1.1 | ColumnalarmIndex | read-only | current | The input index. |
| 1.3.6.1.4.1.27533.5.10.1.1.2 | ColumnalarmDescription | read-only | current | The input alarm description. |
| 1.3.6.1.4.1.27533.5.10.1.1.3 | ColumnvalueType | read-only | current | The input digital or analog type. |
| 1.3.6.1.4.1.27533.5.10.1.1.4 | Columnvalue | read-only | current | The input alarm value. |
| 1.3.6.1.4.1.27533.5.10.1.1.5 | ColumnalarmTimeStamp | read-only | current | The input alarm duration. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlarmDescription | INTEGER { InputGridFailure (1), InputFuseFailure (2), PowerSourceFailure (3), PowerSourceCurrentOutOfRange (4), BatteryVoltageOutOfRange (5), BatteryCurrentChargeOutOfRange (6), BatteryTemperatureOutOfRange (7), BatteryFuseFailure (8), OutputFuseFailure (9), OutputStateDisconnected (10) } | ||
| Index | INTEGER (0..255) | ||
| OKFail | INTEGER { OK (0), Fail (1) } | ||
| OnOff | INTEGER { off (0), on (1) } | ||
| SignedNumber | INTEGER (-32758..32757) | ||
| ValueType | INTEGER { DI (1), AI (2) } |