POWERHUB-CORE-MIB
218 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326 | Nodefore | |||
| 1.3.6.1.4.1.326.2 | Nodesystems | |||
| 1.3.6.1.4.1.326.2.6 | Nodelsd | |||
| 1.3.6.1.4.1.326.2.6.1 | Nodelsdproducts | |||
| 1.3.6.1.4.1.326.2.6.1.1 | Nodepowerhub4k6k7k | |||
| 1.3.6.1.4.1.326.2.6.1.1.1 | Nodealchassis | |||
| 1.3.6.1.4.1.326.2.6.1.1.1.1 | TablealSlotTable | not-accessible | mandatory | A table that contains information about each slot in the PowerHub 4k6k7k chassis. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1 | NodepowerFailure | The powerFailure trap indicates that powerFailure occured in the particular powersupply unit. | ||
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1 | RowalSlotEntry | not-accessible | mandatory | Information about a specific slot. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.1 | ColumnalSlotNumber | read-only | mandatory | The slot number for which the following information applies. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.2 | ColumnalSlotCardType | read-only | mandatory | The card type for this slot. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.3 | ColumnalSlotStatus | read-only | mandatory | The status of the card in this slot. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.4 | ColumnalSlotModel | read-only | mandatory | The model number for this card. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.5 | ColumnalSlotRevision | read-only | mandatory | The revision number for this card. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.6 | ColumnalSlotIssue | read-only | mandatory | The issue number for this slot. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.7 | ColumnalSlotDeviation | read-only | mandatory | The deviation for this slot. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.8 | ColumnalSlotSerialNumber | read-only | mandatory | The serial number of this card this slot. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.9 | ColumnalSlotPower5 | read-only | mandatory | The number of milliamps. of current drawn by this slot at 5 Volts. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.10 | ColumnalSlotPower12 | read-only | mandatory | The number of milliamps. of current drawn by this slot at 12 Volts. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.11 | ColumnalSlotPower33 | read-only | mandatory | The number of milliamps. of current drawn by this slot at 3.3 Volts. |
| 1.3.6.1.4.1.326.2.6.1.1.1.1.1.12 | ColumnalSlotPowerOther | read-only | mandatory | The number of milliamps. of current drawn by this slot at OTHER voltage. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2 | TablealVportTable | not-accessible | mandatory | A table that contains information about each virtual port in the PowerHub 4k6k7k chassis. This table differs from the alSlotToVportTable mainly in how this tab… |
| 1.3.6.1.4.1.326.2.6.1.1.1.2 | NodeboardFailure | The boardFailure trap indicates that intelligent card failure occured in the particular slot. | ||
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1 | RowalVportEntry | not-accessible | mandatory | Information about a specific virtual port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1.1 | ColumnalVportNumber | read-only | mandatory | The virtual port number for which the following information applies. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1.2 | ColumnalVportSlotNumber | read-only | mandatory | The slot number which holds the physical port that corresponds to the virtual port of interest. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1.3 | ColumnalVportPortNumber | read-only | mandatory | The physical port number on the slot that corresponds to this virtual port number, identified by alVportNumber. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1.4 | ColumnalVportPortType | read-only | mandatory | The port type for this virtual port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1.5 | ColumnalVportStatus | read-only | mandatory | The port status for this virtual port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1.6 | ColumnalVportControllerType | read-only | mandatory | The controller type for this virtual port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1.7 | ColumnalVportDataRateConfig | read-write | mandatory | The data rate requested for this virtual port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1.8 | ColumnalVportOperModeConfig | read-write | mandatory | The operating mode requested for this virtual port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1.9 | ColumnalVportAutoNegotiateConfig | read-write | mandatory | The auto-negotiation requested for this virtual port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1.10 | ColumnalVportDataRateStatus | read-only | mandatory | The actual data rate for this virtual port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.2.1.11 | ColumnalVportOperModeStatus | read-only | mandatory | The actual operating mode for this virtual port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.3 | TablealSlotToVportTable | not-accessible | mandatory | A table that contains information about each port of each slot in the PowerHub 4k6k7k chassis. This table is established as a way to specify the information ab… |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1 | RowalSlotVportEntry | not-accessible | mandatory | Information about a specific port in a specific slot. The slot number and the port number in that slot (numbered left to right in ascending order) identifies a… |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1.1 | ColumnalSlotVportSlotNumber | read-only | mandatory | The slot number which holds the port of interest. |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1.2 | ColumnalSlotVportPortNumber | read-only | mandatory | The physical port number on a slot which represents the port of interest. The physical port is numbered from left to right in a slot. |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1.3 | ColumnalSlotVportNumber | read-only | mandatory | The virtual port number which corresponds to the port that is identified by the slot and port number. This scheme thereby relates each virtual port to a slot a… |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1.4 | ColumnalSlotVportPortType | read-only | mandatory | The port type for this port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1.5 | ColumnalSlotVportStatus | read-only | mandatory | The status for this port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1.6 | ColumnalSlotVportControllerType | read-only | mandatory | The controller type for this port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1.7 | ColumnalSlotVportDataRateConfig | read-write | mandatory | The data rate requested for this port. The actual data rate may be different from the requested data rate. |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1.8 | ColumnalSlotVportOperModeConfig | read-write | mandatory | The operating mode requested for this port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1.9 | ColumnalSlotVportAutoNegotiateConfig | read-write | mandatory | The auto-negotiation requested for this port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1.10 | ColumnalSlotVportDataRateStatus | read-only | mandatory | The actual data rate for this port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.3.1.11 | ColumnalSlotVportOperModeStatus | read-only | mandatory | The actual operating mode for this port. |
| 1.3.6.1.4.1.326.2.6.1.1.1.4 | TablealPSTable | not-accessible | mandatory | A table that contains information about each power supply in the PowerHub 4k6k7k chassis. |
| 1.3.6.1.4.1.326.2.6.1.1.1.4.1 | RowalPSEntry | not-accessible | mandatory | Information about a specific power supply. |
| 1.3.6.1.4.1.326.2.6.1.1.1.4.1.1 | ColumnalPSNumber | read-only | mandatory | The power supply number |
| 1.3.6.1.4.1.326.2.6.1.1.1.4.1.2 | ColumnalPSStatus | read-only | mandatory | The status of the power supply identified by the instance of alPSNumber. |
| 1.3.6.1.4.1.326.2.6.1.1.1.5 | ScalaralCpuSlot | read-only | mandatory | The slot number in which the packet engine resides |
| 1.3.6.1.4.1.326.2.6.1.1.1.6 | ScalaralSlotChassis | read-only | mandatory | The maximum number of slots available in the powerhub. Presently it could either be a 5, 10, or 15 slot chassis. This object is used only for PH7000. |
| 1.3.6.1.4.1.326.2.6.1.2 | Nodepowerbits | |||
| 1.3.6.1.4.1.326.2.6.1.3 | Nodeasn9000 | |||
| 1.3.6.1.4.1.326.2.6.2 | Nodelsdcommon | |||
| 1.3.6.1.4.1.326.2.6.2.1 | Nodealsystem | |||
| 1.3.6.1.4.1.326.2.6.2.1.1 | ScalaralChassisType | read-only | mandatory | The model type of the PowerHub |
| 1.3.6.1.4.1.326.2.6.2.1.1 | NodealLoginFailure | The login failure trap indicates that the login failed due to some error condition during the login process. | ||
| 1.3.6.1.4.1.326.2.6.2.1.2 | ScalaralMcpuRtVer | read-only | mandatory | Runtime software version of the motherboard CPU; it is an ASCII string that describes the version as well as the date and time the software was released from t… |
| 1.3.6.1.4.1.326.2.6.2.1.3 | ScalaralMcpuPromVer | read-only | mandatory | PROM software version of the motherboard CPU; it is an ASCII string that describes the version as well as the date and time the software was released from the … |
| 1.3.6.1.4.1.326.2.6.2.1.4 | ScalaralFcpuOneRtVer | read-only | mandatory | Runtime software version of F-bus CPU for the first FDDI board. |
| 1.3.6.1.4.1.326.2.6.2.1.5 | ScalaralFcpuTwoRtVer | read-only | mandatory | Runtime software version of F-bus CPU for the second FDDI board. |
| 1.3.6.1.4.1.326.2.6.2.1.6 | ScalaralFcpuOnePromVer | read-only | mandatory | PROM software version of F-bus CPU for the first FDDI board. |
| 1.3.6.1.4.1.326.2.6.2.1.7 | ScalaralFcpuTwoPromVer | read-only | mandatory | PROM software version of F-bus CPU for the second FDDI board. |
| 1.3.6.1.4.1.326.2.6.2.1.8 | ScalaralRcpuOneRtVer | read-only | mandatory | Runtime software version of Ring CPU for the first FDDI board. |
| 1.3.6.1.4.1.326.2.6.2.1.9 | ScalaralRcpuTwoRtVer | read-only | mandatory | Runtime software version of Ring CPU for the second FDDI board. |
| 1.3.6.1.4.1.326.2.6.2.1.10 | ScalaralRcpuOnePromVer | read-only | mandatory | PROM software version of Ring CPU for the first FDDI board. |
| 1.3.6.1.4.1.326.2.6.2.1.11 | ScalaralRcpuTwoPromVer | read-only | mandatory | PROM software version of Ring CPU for the second FDDI board. |
| 1.3.6.1.4.1.326.2.6.2.1.12 | ScalaralLastLoginFailureTimeDate | read-only | mandatory | Time and date string of the last login session that failed. |
| 1.3.6.1.4.1.326.2.6.2.1.13 | ScalaralLastLoginFailureUserId | read-only | mandatory | User id of the last login session that failed. |
| 1.3.6.1.4.1.326.2.6.2.1.14 | ScalaralLastLoginFailureReason | read-only | mandatory | Reason code for the last login failure. |
| 1.3.6.1.4.1.326.2.6.2.1.15 | ScalaralLastLoginSourceAddress | read-only | mandatory | Source address of the last login session that failed. The value would be either 'console' or ipaddress string of the telnet session. |
| 1.3.6.1.4.1.326.2.6.2.1.17 | ScalaralConsoleSyslogLevel | read-write | mandatory | Level which generates a logging messsage for console port commands (telnet, tip, etc.); no messages if set to off(1). |
| 1.3.6.1.4.1.326.2.6.2.1.18 | ScalaralSnmpSyslogLevel | read-write | mandatory | Level which generates a logging messsage for snmp induced changes; no messages if set to off(1). |
| 1.3.6.1.4.1.326.2.6.2.1.19 | ScalaralIlmiSyslogLevel | read-write | mandatory | Level which generates a logging messsage for ilmi configuration changes; no messages if set to off(1). |
| 1.3.6.1.4.1.326.2.6.2.1.20 | ScalaralSyslogHostType | read-write | mandatory | Host which receives syslog messages: notSet(1) if no host is set or becomes unset; local(2) if messages go to console; ip(3) if messages go to a remote host |
| 1.3.6.1.4.1.326.2.6.2.1.21 | ScalaralSyslogHostIp | read-write | mandatory | IP address of remote host which receives syslog messages; must be set if alSyslogHost is set to ip. |
| 1.3.6.1.4.1.326.2.6.2.1.22 | ScalaralSyslogHostIpFacility | read-write | mandatory | Syslog facility to be assigned to all syslog messages. Default is daemon(1). |
| 1.3.6.1.4.1.326.2.6.2.2 | Nodealbridge | |||
| 1.3.6.1.4.1.326.2.6.2.2.1 | TablealBridgeTable | not-accessible | mandatory | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.326.2.6.2.2.1.1 | RowalBridgeEntry | not-accessible | mandatory | Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.326.2.6.2.2.1.1.1 | ColumnalBridgeEntryAddress | read-only | mandatory | The MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.326.2.6.2.2.1.1.2 | ColumnalBridgeEntryPort | read-only | mandatory | The port number of the port on which a frame having a source address equal to the value of the corresponding instance of alBridgeEntryAddress has been seen. |
| 1.3.6.1.4.1.326.2.6.2.2.1.1.3 | ColumnalBridgeEntryLink | read-only | mandatory | The link number on the port on which a frame having as ource address equal to the value of the corresponding instance of alBridgeEntryAddress has been seen. On… |
| 1.3.6.1.4.1.326.2.6.2.2.1.1.4 | ColumnalBridgeEntryRule | read-only | mandatory | The rule number that is applied to packets that are forwarded to or from this address. |
| 1.3.6.1.4.1.326.2.6.2.2.1.1.5 | ColumnalBridgeEntryFlags | read-only | mandatory | The status of this entry. |
| 1.3.6.1.4.1.326.2.6.2.2.2 | ScalaralBridgeTblClear | read-write | mandatory | When set, clears the Bridge table. |
| 1.3.6.1.4.1.326.2.6.2.2.3 | ScalaralBrFlushCache | read-write | mandatory | When set, flushes the cache. |
| 1.3.6.1.4.1.326.2.6.2.2.4 | TablealPortStatsTable | not-accessible | mandatory | Per port statistics |
| 1.3.6.1.4.1.326.2.6.2.2.4.1 | RowportStatsEntry | not-accessible | mandatory | Per port statistics entries. |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.1 | ColumnportStatsPort | read-only | mandatory | Segment for which the statistics collected. |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.2 | ColumnportStatsPktsIn | read-only | mandatory | Good packets received on the segment. Packets are listed regardless of packet type, or whether the packet is forwarded to another segment. Error packets are no… |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.3 | ColumnportStatsPktsOut | read-only | mandatory | Packets transmitted on the segment. This statistic is incremented when a packet is scheduled for transmission, not when it is actually transmitted. |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.4 | ColumnportStatsOctetsIn | read-only | mandatory | Good octets received on the segment. This statistic includes 8 octets per packet to account for the preamble. |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.5 | ColumnportStatsOctetsOut | read-only | mandatory | Octets transmitted from the segment. This statistic is incremented when a packet is scheduled for transmission, not when it is actually transmitted. This stati… |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.6 | ColumnportStatsMulticastPktsIn | read-only | mandatory | Broadcast multicast packets received on the segment. This statistic is incremented for each good broadcast or multicast packet received on the segment. |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.7 | ColumnportStatsMulticastPktsOut | read-only | mandatory | Broadcast multicast packets transmitted from the segment. This statistic is incremented once for each broadcast or multicast packet scheduled for transmission … |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.8 | ColumnportStatsTableMisses | read-only | mandatory | Packets received that have unknown destination addresses. When address learning is enabled, this statistic is usually incremented only for the first packet tra… |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.9 | ColumnportStatsRcvBuffErrs | read-only | mandatory | Incremented each time the hub detects an incoming packet but does not have a buffer in which to store the packet. |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.10 | ColumnportStatsXmitBuffErrs | read-only | mandatory | Incremented each time the hub attempts to forward a packet to a busy destination segment whose output buffers all are full. |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.11 | ColumnportStatsTotalCollisions | read-only | mandatory | The total number of collisions detected on the segment while attempting to transmit and receive packets. For FDDI segments, this statistic is always 0. |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.12 | ColumnportStatsRcvCollisions | read-only | mandatory | The number of collisions detected on the segment while listening for incoming packets. This statistic is only available for UTP segments. For segments on other… |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.13 | ColumnportStatsXmitCollisions | read-only | mandatory | The number of collisions detected on the segment while attempting to transmit packets. For FDDI segments, this statistic is always 0. |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.14 | ColumnportStatsXmitQLen | read-only | mandatory | The number of outgoing packets in the transmit queue. These packets have been scheduled for transmission, but have not been transmitted yet. |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.15 | ColumnportStatsPeakUtilization | read-only | mandatory | The segment's maximum utilization during a one-second interval since the statistics last were cleared. For Ethernet segments, the current utilization is calcul… |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.16 | ColumnportStatsCurrUtilization | read-only | mandatory | For Ethernet segments, the current utilization is calculated as follows: Once per second, the current one-second utilization is computed as (total # octets) x … |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.17 | ColumnportStatsLossOfCarrier | read-only | mandatory | Indicates that an AUI segment has no cable attached, or the cable or transceiver is faulty. |
| 1.3.6.1.4.1.326.2.6.2.2.4.1.18 | ColumnportStatsExcessRetries | read-only | mandatory | Incremented whenever all of 15 attempts to transmit a single packet cause collisions. This can happen in very busy networks, or when no cable is attached to an… |
| 1.3.6.1.4.1.326.2.6.2.2.5 | ScalaralBridgeStatsClear | read-write | mandatory | When set, clears the statistics for the bridge. When not set, value 0 is returned. |
| 1.3.6.1.4.1.326.2.6.2.2.6 | ScalaralBridgePPControl | read-write | mandatory | When set to 3 , disables the port to port collection of the stats; when set to 1, enables the port to port stats collection; when set to 2, clears the port to … |
| 1.3.6.1.4.1.326.2.6.2.2.7 | TablealPortToPortTable | not-accessible | mandatory | Statistics for port to port traffic. |
| 1.3.6.1.4.1.326.2.6.2.2.7.1 | RowportToPortEntry | not-accessible | mandatory | Statistics for port to port traffic |
| 1.3.6.1.4.1.326.2.6.2.2.7.1.1 | ColumnalPPSourcePort | read-only | mandatory | Source port number |
| 1.3.6.1.4.1.326.2.6.2.2.7.1.2 | ColumnalPPDestinationPort | read-only | mandatory | Destination port number |
| 1.3.6.1.4.1.326.2.6.2.2.7.1.3 | ColumnportToPortPackets | read-only | mandatory | Port to port packets. |
| 1.3.6.1.4.1.326.2.6.2.2.7.1.4 | ColumnportToPortOctets | read-only | mandatory | Port to port octets. |
| 1.3.6.1.4.1.326.2.6.2.2.8 | TablealPortConfigTable | not-accessible | mandatory | Per port configuration for configuring Source and Destination Rules etc. |
| 1.3.6.1.4.1.326.2.6.2.2.8.1 | RowportConfigEntry | not-accessible | mandatory | Per port configuration. |
| 1.3.6.1.4.1.326.2.6.2.2.8.1.1 | ColumnportConfigPort | read-only | mandatory | The port number for this table entry |
| 1.3.6.1.4.1.326.2.6.2.2.8.1.2 | ColumnportConfigSrcRule | read-write | mandatory | Source Rule for the port number identified by the instance of portConfigPort |
| 1.3.6.1.4.1.326.2.6.2.2.8.1.3 | ColumnportConfigDstRule | read-write | mandatory | Destination Rule for the port number identified by the instance of portConfigPort |
| 1.3.6.1.4.1.326.2.6.2.2.8.1.4 | ColumnportConfigBlockLearnedEntries | read-write | mandatory | When set to True (1), the port identified by the instance of portConfigPort will block the learned entries; if set to False (2) the port will not block the lea… |
| 1.3.6.1.4.1.326.2.6.2.2.9 | ScalaralBridgeIpBridging | read-write | mandatory | When set to enable(1), enables the IP bridging and if set to disable(2), disables the IP bridging. |
| 1.3.6.1.4.1.326.2.6.2.2.10 | TablealBrTemplateTable | not-accessible | mandatory | Per template information |
| 1.3.6.1.4.1.326.2.6.2.2.10.1 | RowbrTemplateEntry | not-accessible | mandatory | Template entry. |
| 1.3.6.1.4.1.326.2.6.2.2.10.1.1 | ColumnbrTemplateNumber | read-only | mandatory | The number of the template with which it is identified. |
| 1.3.6.1.4.1.326.2.6.2.2.10.1.2 | ColumnbrTemplateOffset | read-write | mandatory | A displacement, in octets, from the beginning of the packet. This must be a multiple of 4 in the range from 0 to 124 decimal. A value of -1 will delete the ent… |
| 1.3.6.1.4.1.326.2.6.2.2.10.1.3 | ColumnbrTemplateMask | read-write | mandatory | A 4-byte (32-bit) number, normally specified as eight hexadecimal digits (00000000 - ffffffff) Description: The bytes in the mask are numbered from 0 to 3, sta… |
| 1.3.6.1.4.1.326.2.6.2.2.10.1.4 | ColumnbrTemplateComparator | read-write | mandatory | A 4-byte number, usually specified as eight hexadecimal digits (00000000 - ffffffff) Description: If the masked value defined above equals the comparator, then… |
| 1.3.6.1.4.1.326.2.6.2.2.10.1.5 | ColumnbrTemplateOption | read-write | mandatory | Setting this value to 0 assume all 32 bits mask and comparator specified; value 1 assume half-word (2 bytes) qunatity; and value 2 assume single-byte quantity. |
| 1.3.6.1.4.1.326.2.6.2.2.11 | TablealBrRuleTable | not-accessible | mandatory | Per rule information |
| 1.3.6.1.4.1.326.2.6.2.2.11.1 | RowbrRuleEntry | not-accessible | mandatory | Rule entry. |
| 1.3.6.1.4.1.326.2.6.2.2.11.1.1 | ColumnbrRuleNumber | read-only | mandatory | A rule number in the range 101-162. You can define up to 62 rules. |
| 1.3.6.1.4.1.326.2.6.2.2.11.1.2 | ColumnbrRuleStatement | read-write | mandatory | Specifies the templates and the logical operators that make up the rule. Rule statements consist of rule numbers joined by the following logical operators: Ope… |
| 1.3.6.1.4.1.326.2.6.2.2.12 | TablealBrRuleToNodeTable | not-accessible | mandatory | Rules to specific node. |
| 1.3.6.1.4.1.326.2.6.2.2.12.1 | RowalBrRuleToNodeEntry | not-accessible | mandatory | Rule node entry. |
| 1.3.6.1.4.1.326.2.6.2.2.12.1.1 | ColumnbrRuleToNodePort | read-write | mandatory | The number of the port for which this rule applies |
| 1.3.6.1.4.1.326.2.6.2.2.12.1.2 | ColumnbrRuleToNodeMacAddr | read-write | mandatory | The source MAC address |
| 1.3.6.1.4.1.326.2.6.2.2.12.1.3 | ColumnbrRuleToNodeRule | read-write | mandatory | The rule number that applies to this entry. |
| 1.3.6.1.4.1.326.2.6.2.2.13 | TablealBrGroupTable | not-accessible | mandatory | Bridge group table. |
| 1.3.6.1.4.1.326.2.6.2.2.13.1 | RowalBrGroupEntry | not-accessible | mandatory | Bridge group entry. |
| 1.3.6.1.4.1.326.2.6.2.2.13.1.1 | ColumnbrGroupNumber | read-only | mandatory | The group number by which the group is identified with. |
| 1.3.6.1.4.1.326.2.6.2.2.13.1.2 | ColumnbrGroupPortsMask | read-write | mandatory | The ports associated with the group number identified by the instance of brGroupNumber. The mask is ascii segments separated by commas. A value of -1 would inv… |
| 1.3.6.1.4.1.326.2.6.2.2.13.1.3 | ColumnbrGroupName | read-write | mandatory | The name of the group for which this entry applies |
| 1.3.6.1.4.1.326.2.6.2.2.14 | ScalaralBridgeSTPControl | read-write | mandatory | When set to 2 , disables the spanning tree. set to 1, enables the spanning tree. |
| 1.3.6.1.4.1.326.2.6.2.2.15 | TablealPortStateTable | not-accessible | mandatory | Per port state information about spanning tree, dignostics and management. |
| 1.3.6.1.4.1.326.2.6.2.2.15.1 | RowportStateEntry | not-accessible | mandatory | Port state entry. |
| 1.3.6.1.4.1.326.2.6.2.2.15.1.1 | ColumnportStatePort | read-only | mandatory | The port number for this table entry |
| 1.3.6.1.4.1.326.2.6.2.2.15.1.2 | ColumnportStateDiag | read-only | mandatory | The diagnostics state of the port |
| 1.3.6.1.4.1.326.2.6.2.2.15.1.3 | ColumnportStateMgmt | read-only | mandatory | The management state of the port |
| 1.3.6.1.4.1.326.2.6.2.2.15.1.4 | ColumnportStateStp | read-only | mandatory | The spanning tree state of the port. |
| 1.3.6.1.4.1.326.2.6.2.2.15.1.5 | ColumnportStatePortName | read-only | mandatory | The name of this port |
| 1.3.6.1.4.1.326.2.6.2.3 | Nodealmgmt | |||
| 1.3.6.1.4.1.326.2.6.2.3.1 | TablealAutoPortStateTable | not-accessible | mandatory | auto port stat table |
| 1.3.6.1.4.1.326.2.6.2.3.1.1 | RowautoportStateEntry | not-accessible | mandatory | auto port stat entry. |
| 1.3.6.1.4.1.326.2.6.2.3.1.1.1 | ColumnautoPortStatePort | read-only | mandatory | The port number for this table entry |
| 1.3.6.1.4.1.326.2.6.2.3.1.1.2 | ColumnautoPortState | read-write | mandatory | Whether the auto port state detection is turned on or not. |
| 1.3.6.1.4.1.326.2.6.2.3.1.1.3 | ColumnautoPortStateThreshold | read-write | mandatory | Corresponding to the threshold parameter of the autoportstate command. |
| 1.3.6.1.4.1.326.2.6.2.3.2 | ScalaralLinkStatsCollect | read-write | mandatory | When set to enable(1), per link stats collection is enabled; when set to disable(0), the per link stats are not collected. |
| 1.3.6.1.4.1.326.2.6.2.3.3 | ScalaralLinkStatsClear | read-write | mandatory | When set, clears the link stats; otherwise value 0 is returned. |
| 1.3.6.1.4.1.326.2.6.2.3.4 | TablealLinkStatsTable | not-accessible | mandatory | Per link stats table |
| 1.3.6.1.4.1.326.2.6.2.3.4.1 | RowlinkStatsEntry | read-write | mandatory | link stats entry. |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.1 | ColumnlinkStatsPort | read-only | mandatory | Port Number |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.2 | ColumnlinkStatsLink | read-only | mandatory | Link Number |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.3 | ColumnlinkStatsPktsIn | read-only | mandatory | Pkts In - corresponds to pi |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.4 | ColumnlinkStatsOctetsIn | read-only | mandatory | Octets In - corresponds to oi |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.5 | ColumnlinkStatsBMCastPktsIn | read-only | mandatory | Bmcast Pks In - corresponds to bpi |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.6 | ColumnlinkStatsGiantPkts | read-only | mandatory | Giant Pkts - corresponds to gp |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.7 | ColumnlinkStatsFrameErrs | read-only | mandatory | Frame Errors - corresponds to fa |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.8 | ColumnlinkStatsFCSErrs | read-only | mandatory | FCS Errors corresponds to fcs |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.9 | ColumnlinkStatsCodingErrors | read-only | mandatory | This Counter is incremented when the receiver (RX) port detects an invalid symbol in the incoming code sent by the TX port using symbol mode. |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.10 | ColumnlinkStatsDataRateMismatch | read-only | mandatory | This counter is incremented by one for each frame received on this port that meets all of the following conditions: 1) The Collision Event signal is not assert… |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.11 | ColumnlinkStatsJabbers | read-only | mandatory | This Counter is incremented for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.12 | ColumnlinkStatsShortEvents | read-only | mandatory | This counter is incremented for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.13 | ColumnlinkStatsRunts | read-only | mandatory | An event whose length is greater than 74 bit times but less than 82 bit times shall increment either the shortEvents counter or the runts counter but not both |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.14 | ColumnlinkStatsPortCollision | read-only | mandatory | This counter is incremented for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is also asserted. |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.15 | ColumnlinkStatsLateCollision | read-only | mandatory | This counter is incremented for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE while the ActivityDuration is great… |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.16 | ColumnlinkStatsAutoPartition | read-only | mandatory | This counter is incremented each time the repeater has automatically partitioned this port |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.17 | ColumnlinkStatsIsolates | read-only | mandatory | This counter is incremented whenever the port detects two consecutive carrier integrity false carriers. |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.18 | ColumnlinkStatsSaFieldChanges | read-only | mandatory | This counter is incremented for each time that the rptrAddrTrackLastSourceAddress attribute for this port has changed. |
| 1.3.6.1.4.1.326.2.6.2.3.4.1.19 | ColumnlinkStatsLastSa | read-only | mandatory | This object is the SourceAddress of the last readable frame received by this port. |
| 1.3.6.1.4.1.326.2.6.2.3.5 | TablealLinkControlTable | not-accessible | mandatory | Per link stats table |
| 1.3.6.1.4.1.326.2.6.2.3.5.1 | RowlinkControlEntry | read-write | mandatory | link control entry. |
| 1.3.6.1.4.1.326.2.6.2.3.5.1.1 | ColumnlinkControlPort | read-only | mandatory | Port number for this entry. |
| 1.3.6.1.4.1.326.2.6.2.3.5.1.2 | ColumnlinkControlLink | read-only | mandatory | Link number for this entry. |
| 1.3.6.1.4.1.326.2.6.2.3.5.1.3 | ColumnlinkControlEnlState | read-write | mandatory | Setting the value of this object to Enable (1) will enable the link and setting to Disable(2) will disable the link. |
| 1.3.6.1.4.1.326.2.6.2.3.5.1.4 | ColumnlinkControlLinkTest | read-only | mandatory | Link test status for the link; corresponds to lt option of the lkd command. |
| 1.3.6.1.4.1.326.2.6.2.3.5.1.5 | ColumnlinkControlPartition | read-only | mandatory | Partitioning state of the link |
| 1.3.6.1.4.1.326.2.6.2.3.5.1.6 | ColumnlinkControlPolarity | read-only | mandatory | Polarity of the link |
| 1.3.6.1.4.1.326.2.6.2.3.6 | TablealPortLinkTable | not-accessible | mandatory | Per port link type |
| 1.3.6.1.4.1.326.2.6.2.3.6.1 | RowportLinkEntry | not-accessible | mandatory | port link entry. |
| 1.3.6.1.4.1.326.2.6.2.3.6.1.1 | ColumnportLinkPort | read-only | mandatory | The port number for which the port type is to be set |
| 1.3.6.1.4.1.326.2.6.2.3.6.1.2 | ColumnportLinkType | read-write | mandatory | The type of port |
| 1.3.6.1.4.1.326.2.6.2.3.7 | TablealFiberStatsTable | not-accessible | mandatory | Per port fiber stats and Fiber Security |
| 1.3.6.1.4.1.326.2.6.2.3.7.1 | RowfiberStatsEntry | not-accessible | mandatory | fiber stat entry. |
| 1.3.6.1.4.1.326.2.6.2.3.7.1.1 | ColumnfiberStatsPort | read-only | mandatory | The fiber port for which the stats are requested or the Fiber violation is set |
| 1.3.6.1.4.1.326.2.6.2.3.7.1.2 | ColumnfiberAuiStatus | read-only | mandatory | The fiber aui status for the port that is specified by the instance of fiberStatsPort |
| 1.3.6.1.4.1.326.2.6.2.3.7.1.3 | ColumnfiberSecurityViolation | read-write | mandatory | The fiber port for which the stats are requested or the Fiber violation is set |
| 1.3.6.1.4.1.326.2.6.2.3.8 | ScalaralPortMonitorClose | read-write | mandatory | Setting the value to close(1), will turn the port monitoring off. |
| 1.3.6.1.4.1.326.2.6.2.3.9 | TablealPortMonitorTable | not-accessible | mandatory | port monitor table. |
| 1.3.6.1.4.1.326.2.6.2.3.9.1 | RowportMonitorEntry | not-accessible | mandatory | port monitor entry. |
| 1.3.6.1.4.1.326.2.6.2.3.9.1.1 | ColumnportMonSrcPort | read-only | mandatory | The traffic to/from this port will be monitored on the portMonDstPort |
| 1.3.6.1.4.1.326.2.6.2.3.9.1.2 | ColumnportMonDstPort | read-only | mandatory | The traffic to/from portMonSrcPort will be monitored on this port |
| 1.3.6.1.4.1.326.2.6.2.3.9.1.3 | ColumnportMonTrafficType | read-write | mandatory | Setting this value to 1, will let the port monitor monitor forwarded traffic; setting to 8 means the forwarded traffic will not be monitored. |
| 1.3.6.1.4.1.326.2.6.2.3.10 | ScalaralReboot | write-only | mandatory | Setting the value to Reboot(1), will reboot the PowerHub. |
| 1.3.6.1.4.1.326.2.6.2.3.11 | TablealPortMonitorViewTable | not-accessible | mandatory | port monitor view table. |
| 1.3.6.1.4.1.326.2.6.2.3.11.1 | RowportMonitorViewEntry | not-accessible | mandatory | port monitor view entry. |
| 1.3.6.1.4.1.326.2.6.2.3.11.1.1 | ColumnportMonViewSrcPort | read-only | mandatory | The traffic from this port to the port designated by portMonViewDstPort will be monitored on portMonViewMonitorPort. |
| 1.3.6.1.4.1.326.2.6.2.3.11.1.2 | ColumnportMonViewDstPort | read-only | mandatory | The traffic to this port from the port designated by portMonViewSrcPort will be monitored on portMonViewMonitorPort. |
| 1.3.6.1.4.1.326.2.6.2.3.11.1.3 | ColumnportMonViewMonitorPort | read-write | mandatory | The traffic to portMonViewDstPort from the port designated by portMonViewSrcPort will be monitored on portMonViewMonitorPort. The mask is ascii, segments separ… |
| 1.3.6.1.4.1.326.2.6.2.3.12 | ScalaralCfgLocalMediaScope | read-only | mandatory | This object display the types of local media currently available on the PH for storing files. The PH4000 and PH6000 do not support floppy whereas the PH3000 an… |
| 1.3.6.1.4.1.326.2.6.2.3.13 | ScalaralCfgMediaName | read-write | mandatory | This object specify the medium name to which the the powerhub will save the configurations. The value 'none' is returned when user have not set the valid save … |
| 1.3.6.1.4.1.326.2.6.2.3.14 | ScalaralCfgTftpHostAddr | read-write | mandatory | This object specify the IP address of the tftp host system to which the configs get saved when the object alCfgMediaName is set with value tftpHost(3). |
| 1.3.6.1.4.1.326.2.6.2.3.15 | ScalaralCfgFileName | read-write | mandatory | This object specify the configuration filename to which the PH will save the configuration. Depending on the medium (floppy, flash, or tftpHost) in which the s… |
| 1.3.6.1.4.1.326.2.6.2.3.16 | ScalaralCfgSaveOp | read-write | mandatory | Save config operation can be performed only when this object is set to value '1'. This field returns a dummy value 100 for get operations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING (SIZE (6)) |