POWERHUB-TCPIP-MIB

182 objects

No module-level DESCRIPTION found.

Imported Objects

RFC1155-SMI	Counter enterprises Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks
RFC1213-MIB	DisplayString PhysAddress

OID	Name	Access	Status	Description
1.3.6.1.4.1.326	Nodefore
1.3.6.1.4.1.326.2	Nodesystems
1.3.6.1.4.1.326.2.6	Nodelsd
1.3.6.1.4.1.326.2.6.1	Nodelsdproducts
1.3.6.1.4.1.326.2.6.2	Nodelsdcommon
1.3.6.1.4.1.326.2.6.2.4	Nodealrip
1.3.6.1.4.1.326.2.6.2.4.1	ScalaralripControlType	read-write	mandatory	control type to change the RIP update mechanism
1.3.6.1.4.1.326.2.6.2.4.2	TablealRipNormalConfigTable	not-accessible	mandatory	Per port RIP configuration per segment method.
1.3.6.1.4.1.326.2.6.2.4.2.1	RowalripNormalConfigEntry	not-accessible	mandatory	information about a specific RIP configuration entry
1.3.6.1.4.1.326.2.6.2.4.2.1.1	ColumnalripNormalConfigPort	read-write	mandatory	Port number for which the RIP parameters are to be set or viewed.
1.3.6.1.4.1.326.2.6.2.4.2.1.2	ColumnalripNormalConfigTalk	read-write	mandatory	Controls whether the hub generates RIP packets on the port identified by the instance of ripConfigPort.
1.3.6.1.4.1.326.2.6.2.4.2.1.3	ColumnalripNormalConfigListen	read-write	mandatory	Controls whether the hub processes RIP packets received on the port identified by the instance of ripConfigPort.
1.3.6.1.4.1.326.2.6.2.4.2.1.4	ColumnalripNormalConfigPoison	read-write	mandatory	Controls what happens when a route goes down. If set to no(2), the hub simply stops reporting the route. If set to yes(1), the hub reports it one more time, bu…
1.3.6.1.4.1.326.2.6.2.4.2.1.5	ColumnalripNormalConfigRptStaticRt	read-write	mandatory	When RIP packets are generated on the port, controls whether the hub reports the static routes in its route table.
1.3.6.1.4.1.326.2.6.2.4.2.1.6	ColumnalripNormalConfigRptDefaultRt	read-write	mandatory	When RIP packets are generated on the port, controls whether the hub reports the default routes, if any, in ints route table.
1.3.6.1.4.1.326.2.6.2.4.2.1.7	ColumnalripNormalConfigAccptDefaultRt	read-write	mandatory	When RIP packets are received on the port, controls whether the hub accepts(learns) a default route that is reported in a RIP packet.
1.3.6.1.4.1.326.2.6.2.4.3	TablealRipVLANConfigTable	not-accessible	mandatory	Per port RIP configuration per VLAN method.
1.3.6.1.4.1.326.2.6.2.4.3.1	RowalripVLANConfigEntry	not-accessible	mandatory	information about a specific RIP configuration entry
1.3.6.1.4.1.326.2.6.2.4.3.1.1	ColumnalripVLANConfigNetNumber	read-write	mandatory	IP network number for which the RIP parameters are to be set or viewed.
1.3.6.1.4.1.326.2.6.2.4.3.1.2	ColumnalripVLANConfigTalk	read-write	mandatory	Controls whether the hub generates RIP packets on the port identified by the instance of ripConfigPort.
1.3.6.1.4.1.326.2.6.2.4.3.1.3	ColumnalripVLANConfigListen	read-write	mandatory	Controls whether the hub processes RIP packets received on the port identified by the instance of ripConfigPort. This field cannot be activated if this interfa…
1.3.6.1.4.1.326.2.6.2.4.3.1.4	ColumnalripVLANConfigPoison	read-write	mandatory	Controls what happens when a route goes down. If set to no(2), the hub simply stops reporting the route. If set to yes(1), the hub reports it one more time, bu…
1.3.6.1.4.1.326.2.6.2.4.3.1.5	ColumnalripVLANConfigRptStaticRt	read-write	mandatory	When RIP packets are generated on the port, controls whether the hub reports the static routes in its route table.
1.3.6.1.4.1.326.2.6.2.4.3.1.6	ColumnalripVLANConfigRptDefaultRt	read-write	mandatory	When RIP packets are generated on the port, controls whether the hub reports the default routes, if any, in ints route table.
1.3.6.1.4.1.326.2.6.2.4.3.1.7	ColumnalripVLANConfigAccptDefaultRt	read-write	mandatory	When RIP packets are received on the port, controls whether the hub accepts(learns) a default
1.3.6.1.4.1.326.2.6.2.4.3.1.8	ColumnalripVLANConfigDelete	read-write	mandatory	When set to 1, this entry is deleted.
1.3.6.1.4.1.326.2.6.2.4.4	ScalaralripStatsClear	read-write	mandatory	When set to 1, clears the RIP stats
1.3.6.1.4.1.326.2.6.2.4.5	ScalaralRipStatPktsRcvd	read-only	mandatory	Packets Received.
1.3.6.1.4.1.326.2.6.2.4.6	ScalaralRipStatPktsXmitted	read-only	mandatory	Packets Sent.
1.3.6.1.4.1.326.2.6.2.4.7	ScalaralRipStatReqsRcvd	read-only	mandatory	Requests Received.
1.3.6.1.4.1.326.2.6.2.4.8	ScalaralRipStatRespRcvd	read-only	mandatory	Responses Received.
1.3.6.1.4.1.326.2.6.2.4.9	ScalaralRipStatReqsXmitted	read-only	mandatory	Requests Sent.
1.3.6.1.4.1.326.2.6.2.4.10	ScalaralRipStatRespXmitted	read-only	mandatory	Responses Sent.
1.3.6.1.4.1.326.2.6.2.4.11	ScalaralRipStatRouteTimeOuts	read-only	mandatory	Route Timeouts.
1.3.6.1.4.1.326.2.6.2.4.12	ScalaralRipStatShortPkts	read-only	mandatory	Short packets received.
1.3.6.1.4.1.326.2.6.2.4.13	ScalaralRipStatBadVer	read-only	mandatory	Bad version pkts received.
1.3.6.1.4.1.326.2.6.2.4.14	ScalaralRipStatBadZeroes	read-only	mandatory	Bad zeroes received.
1.3.6.1.4.1.326.2.6.2.4.15	ScalaralRipStatBadSrcPort	read-only	mandatory	Packets with bad Source port received.
1.3.6.1.4.1.326.2.6.2.4.16	ScalaralRipStatBadSrcIp	read-only	mandatory	Packets with bad source IP address received.
1.3.6.1.4.1.326.2.6.2.4.17	ScalaralRipStatPktsSelf	read-only	mandatory	Packets from self received.
1.3.6.1.4.1.326.2.6.2.4.18	ScalaralRipigUpdates	read-only	mandatory	number of RIP update trigged.
1.3.6.1.4.1.326.2.6.2.4.19	ScalaralRipStatPqueuePktsQueued	read-only	mandatory	Packets queued in RIP process queue.
1.3.6.1.4.1.326.2.6.2.4.20	ScalaralRipStatPqueueFreeQueue	read-only	mandatory	Free entries in the RIP processing queue.
1.3.6.1.4.1.326.2.6.2.4.21	ScalaralRipStatTqueuePktsQueued	read-only	mandatory	Packets queued in the RIP route timeout process queue.
1.3.6.1.4.1.326.2.6.2.4.22	ScalaralRipStatTqueueFreeQueue	read-only	mandatory	Free entries in the RIP route timeout queue.
1.3.6.1.4.1.326.2.6.2.4.23	ScalaralRipDynPktsRcvd	read-only	mandatory	Packets Received.
1.3.6.1.4.1.326.2.6.2.4.24	ScalaralRipDynPktsXmitted	read-only	mandatory	Packets Sent.
1.3.6.1.4.1.326.2.6.2.4.25	ScalaralRipDynReqsRcvd	read-only	mandatory	Requests Received.
1.3.6.1.4.1.326.2.6.2.4.26	ScalaralRipDynRespRcvd	read-only	mandatory	Responses Received.
1.3.6.1.4.1.326.2.6.2.4.27	ScalaralRipDynReqsXmitted	read-only	mandatory	Requests Sent.
1.3.6.1.4.1.326.2.6.2.4.28	ScalaralRipDynRespXmitted	read-only	mandatory	Responses Sent.
1.3.6.1.4.1.326.2.6.2.4.29	ScalaralRipDynRouteTimeOuts	read-only	mandatory	Route Timeouts.
1.3.6.1.4.1.326.2.6.2.4.30	ScalaralRipDynShortPkts	read-only	mandatory	Short packets received.
1.3.6.1.4.1.326.2.6.2.4.31	ScalaralRipDynBadVer	read-only	mandatory	Bad version pkts received.
1.3.6.1.4.1.326.2.6.2.4.32	ScalaralRipDynBadZeroes	read-only	mandatory	Bad zeroes received.
1.3.6.1.4.1.326.2.6.2.4.33	ScalaralRipDynBadSrcPort	read-only	mandatory	Packets with bad Source port received.
1.3.6.1.4.1.326.2.6.2.4.34	ScalaralRipDynBadSrcIp	read-only	mandatory	Packets with bad source IP address received.
1.3.6.1.4.1.326.2.6.2.4.35	ScalaralRipDynPktsSelf	read-only	mandatory	Packets from self received.
1.3.6.1.4.1.326.2.6.2.4.36	ScalaralRipDynNumTrigUpdates	read-only	mandatory	number of RIP update trigged.
1.3.6.1.4.1.326.2.6.2.4.37	ScalaralRipDyntPqueuePktsQueued	read-only	mandatory	Packets queued in RIP process queue.
1.3.6.1.4.1.326.2.6.2.4.38	ScalaralRipDynPqueueFreeQueue	read-only	mandatory	Free entries in the RIP processing queue.
1.3.6.1.4.1.326.2.6.2.4.39	ScalaralRipDynTqueuePktsQueued	read-only	mandatory	Packets queued in the RIP route timeout process queue.
1.3.6.1.4.1.326.2.6.2.4.40	ScalaralRipDynTqueueFreeQueue	read-only	mandatory	Free entries in the RIP route timeout queue.
1.3.6.1.4.1.326.2.6.2.4.41	TablealRipAccptFilTable	not-accessible	mandatory	RIP Accept filter table
1.3.6.1.4.1.326.2.6.2.4.41.1	RowripAccptFilEntry	not-accessible	mandatory	RIP Accept filter entry
1.3.6.1.4.1.326.2.6.2.4.41.1.1	ColumnripAccptFilNumber	read-write	mandatory	Filter Number; Range 1-64
1.3.6.1.4.1.326.2.6.2.4.41.1.2	ColumnripAccptFilAddr	read-write	mandatory	Valid network or subnet address
1.3.6.1.4.1.326.2.6.2.4.41.1.3	ColumnripAccptFilMask	read-write	mandatory	Accept filter Mask
1.3.6.1.4.1.326.2.6.2.4.41.1.4	ColumnripAccptFilPort	read-write	mandatory	Port number on which network should be accepted or not. Range 1-14.
1.3.6.1.4.1.326.2.6.2.4.42	TablealRipReportFilTable	not-accessible	mandatory	RIP Report filter table
1.3.6.1.4.1.326.2.6.2.4.42.1	RowripReportFilEntry	not-accessible	mandatory	RIP Report filter entry
1.3.6.1.4.1.326.2.6.2.4.42.1.1	ColumnripReportFilNumber	read-write	mandatory	Filter Number; Range 1-64
1.3.6.1.4.1.326.2.6.2.4.42.1.2	ColumnripReportFilAddr	read-write	mandatory	Valid network or subnet address
1.3.6.1.4.1.326.2.6.2.4.42.1.3	ColumnripReportFilMask	read-write	mandatory	Report filter Mask
1.3.6.1.4.1.326.2.6.2.4.42.1.4	ColumnripReportFilPort	read-write	mandatory	Port number on which network should be reported or not. Port number range 1-14
1.3.6.1.4.1.326.2.6.2.5	Nodealtcp
1.3.6.1.4.1.326.2.6.2.5.1	ScalaralTcpConnIdleTime	read-write	mandatory	Time in minutes before sending keep-alives. The range is 5 to 30 minutes.
1.3.6.1.4.1.326.2.6.2.5.2	ScalaralTcpKeepAliveInt	read-write	mandatory	Time interval in seconds between two successive keep-alive sends. The range is 30 to 240 seconds.
1.3.6.1.4.1.326.2.6.2.5.3	ScalaralTcpDisconnectInt	read-only	mandatory	Time interval in seconds, before an idle connection is dropped. This equals to the sum of alTcpConnIdleTime plus eight times the alTcpKeepAliveInt interval.
1.3.6.1.4.1.326.2.6.2.5.4	ScalaralTcpShortSegRcvd	read-only	mandatory	Number of short segments received.
1.3.6.1.4.1.326.2.6.2.5.5	ScalaralTcpStatsClear	read-write	mandatory	When set to 1, clears the TCP stats.
1.3.6.1.4.1.326.2.6.2.5.6	TablealTcpConnTable	not-accessible	mandatory	A table containing TCP connection-specific information.
1.3.6.1.4.1.326.2.6.2.5.6.1	RowalTcpConnEntry	not-accessible	mandatory	Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection make…
1.3.6.1.4.1.326.2.6.2.5.6.1.1	ColumnalTcpConnId	read-only	mandatory	The connection Identifier by which a connection is addressed.
1.3.6.1.4.1.326.2.6.2.5.6.1.2	ColumnalTcpConnState	read-write	mandatory	The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to retu…
1.3.6.1.4.1.326.2.6.2.5.6.1.3	ColumnalTcpConnLocalAddress	read-only	mandatory	The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface assoc…
1.3.6.1.4.1.326.2.6.2.5.6.1.4	ColumnalTcpConnLocalPort	read-only	mandatory	The local port number for this TCP connection.
1.3.6.1.4.1.326.2.6.2.5.6.1.5	ColumnalTcpConnRemAddress	read-only	mandatory	The remote IP address for this TCP connection.
1.3.6.1.4.1.326.2.6.2.5.6.1.6	ColumnalTcpConnRemPort	read-only	mandatory	The remote port number for this TCP connection.
1.3.6.1.4.1.326.2.6.2.5.7	TablealTcpFilTable	not-accessible	mandatory	TCP filter table
1.3.6.1.4.1.326.2.6.2.5.7.1	RowtcpFilEntry	not-accessible	mandatory	TCP filter entry
1.3.6.1.4.1.326.2.6.2.5.7.1.1	ColumntcpFilNumber	read-write	mandatory	Filter Number; Range 1-32
1.3.6.1.4.1.326.2.6.2.5.7.1.2	ColumntcpFilSrcAddr	read-write	mandatory	Source address
1.3.6.1.4.1.326.2.6.2.5.7.1.3	ColumntcpFilSrcMask	read-write	mandatory	Mask
1.3.6.1.4.1.326.2.6.2.5.7.1.4	ColumntcpFilProtocol	read-write	mandatory	tcp(1) or udp(2)
1.3.6.1.4.1.326.2.6.2.5.7.1.5	ColumntcpFilDstPort	read-write	mandatory	smtp(1000), telnet(2000), ftp(3000) or valid port Number
1.3.6.1.4.1.326.2.6.2.6	Nodealip
1.3.6.1.4.1.326.2.6.2.6.1	ScalaralArpTableClear	read-write	mandatory	When set, clears the ARP table.
1.3.6.1.4.1.326.2.6.2.6.2	ScalaralArpAge	read-write	mandatory	Timeout in minutes for aging ARP entries; when set to zero, set-arpage is turned off.
1.3.6.1.4.1.326.2.6.2.6.3	ScalaralArpStatReqsRcvd	read-only	mandatory	Requests Received.
1.3.6.1.4.1.326.2.6.2.6.4	ScalaralArpStatRepliesRcvd	read-only	mandatory	Replies Received.
1.3.6.1.4.1.326.2.6.2.6.5	ScalaralArpStatInvalidOpcodes	read-only	mandatory	Invalid Opcodes Received.
1.3.6.1.4.1.326.2.6.2.6.6	ScalaralArpStatRequestsSent	read-only	mandatory	Requests Sent.
1.3.6.1.4.1.326.2.6.2.6.7	ScalaralArpStatRepliesSent	read-only	mandatory	Replies Sent.
1.3.6.1.4.1.326.2.6.2.6.8	ScalaralArpStatProxyReplies	read-only	mandatory	number of proxy replied
1.3.6.1.4.1.326.2.6.2.6.9	ScalaralArpDynReqsRcvd	read-only	mandatory	Requests Received.
1.3.6.1.4.1.326.2.6.2.6.10	ScalaralArpDynRepliesRcvd	read-only	mandatory	Replies Received.
1.3.6.1.4.1.326.2.6.2.6.11	ScalaralArpDynInvalidOpcodes	read-only	mandatory	Invalid Opcodes Received.
1.3.6.1.4.1.326.2.6.2.6.12	ScalaralArpDynRequestsSent	read-only	mandatory	Requests Sent.
1.3.6.1.4.1.326.2.6.2.6.13	ScalaralArpDynRepliesSent	read-only	mandatory	Replies Sent.
1.3.6.1.4.1.326.2.6.2.6.14	ScalaralArpDynProxyReplies	read-only	mandatory	number of proxy replied
1.3.6.1.4.1.326.2.6.2.6.15	ScalaralArpStatsClear	read-write	mandatory	When set to 1, clears the ARP statistics.
1.3.6.1.4.1.326.2.6.2.6.16	TablealArpProxyTable	not-accessible	mandatory	Per port proxy arp enable/disable
1.3.6.1.4.1.326.2.6.2.6.16.1	RowarpProxyEntry	not-accessible	mandatory	information of a specific arp proxy entry
1.3.6.1.4.1.326.2.6.2.6.16.1.1	ColumnarpProxyPort	read-only	mandatory	Port Number
1.3.6.1.4.1.326.2.6.2.6.16.1.2	ColumnarpProxyEnable	read-write	mandatory	If set to Enable(1), enables proxy arp arp requests received on the port identified by the instance of arpProxyPort. If set to Disable(2), it disables the prox…
1.3.6.1.4.1.326.2.6.2.6.17	TablealIpTemplateTable	not-accessible	mandatory	Per template information
1.3.6.1.4.1.326.2.6.2.6.17.1	RowalipTemplateEntry	not-accessible	mandatory	Information about a filtering template
1.3.6.1.4.1.326.2.6.2.6.17.1.1	ColumnalipTemplateNumber	read-write	mandatory	The number of the template with which it is identified.
1.3.6.1.4.1.326.2.6.2.6.17.1.2	ColumnalipTemplateDelete	read-write	mandatory	When set to 1, this entry is deleted.
1.3.6.1.4.1.326.2.6.2.6.17.1.3	ColumnalipTemplateAction	read-write	mandatory	Whether the packet being filtered should be forwarded or blocked
1.3.6.1.4.1.326.2.6.2.6.17.1.4	ColumnalipTemplateSrcAddr	read-write	mandatory	The portion of the packet's source address specified by ipTemplateSrcMask is matched with this address.
1.3.6.1.4.1.326.2.6.2.6.17.1.5	ColumnalipTemplateSrcMask	read-write	mandatory	Source Mask. The portion specified by this mask is matched with source address.
1.3.6.1.4.1.326.2.6.2.6.17.1.6	ColumnalipTemplateDstAddr	read-write	mandatory	The portion of the packet's destination address specified by ipTemplateDstMask is matched with this address.
1.3.6.1.4.1.326.2.6.2.6.17.1.7	ColumnalipTemplateDstMask	read-write	mandatory	Destination mask. The portion specified by this mask is matched with destination address.
1.3.6.1.4.1.326.2.6.2.6.17.1.8	ColumnalipTemplateProtocol	read-write	mandatory	Determines the type of packets that need to be filtered. PowerHub currently recognizes ip(1) , icmp(1), ipinip(4), tcp(6), udp(17), ospf(89). If all(0) is spec…
1.3.6.1.4.1.326.2.6.2.6.17.1.9	ColumnalipTemplateOperator	read-write	mandatory	Allowed only if the protocol field is tcp or udp. The following operators allowed: (1) Unknown =(2) Equal to ~=(3) Not equal to <(4) Less than >(5) Greater tha…
1.3.6.1.4.1.326.2.6.2.6.17.1.10	ColumnalipTemplateDstPort	read-write	mandatory	This is expressed as either a well-known protocol name or a well-known tcp or udp port number. 0 means unknown
1.3.6.1.4.1.326.2.6.2.6.18	TablealIpRuleTable	not-accessible	mandatory	Per template information
1.3.6.1.4.1.326.2.6.2.6.18.1	RowalipRuleEntry	not-accessible	mandatory	Information about a specific filtering rule
1.3.6.1.4.1.326.2.6.2.6.18.1.1	ColumnalipRuleNumber	read-write	mandatory	The number of the rule with which it is Identified.
1.3.6.1.4.1.326.2.6.2.6.18.1.2	ColumnalipRuleDelete	read-write	mandatory	If set to 1 the entry is deleted.
1.3.6.1.4.1.326.2.6.2.6.18.1.3	ColumnalipRuleTemplates	read-write	mandatory	The templates associated with the rule identified by the instance of ipRuleNumber.
1.3.6.1.4.1.326.2.6.2.6.19	TablealipAcsCtrlTable	not-accessible	mandatory	Per port IP access control filters
1.3.6.1.4.1.326.2.6.2.6.19.1	RowalipAcsCtrlEntry	not-accessible	mandatory	information of a specific rule applied to segment
1.3.6.1.4.1.326.2.6.2.6.19.1.1	ColumnalipAcsCtrlPort	read-write	mandatory	Port number of the port for which the source and destination access filter apply.
1.3.6.1.4.1.326.2.6.2.6.19.1.2	ColumnalipAcsCtrlDelete	read-write	mandatory	If set to 1, the entry is deleted.
1.3.6.1.4.1.326.2.6.2.6.19.1.3	ColumnalipAcsCtrlSourceRule	read-write	mandatory	the source rule is assigned to the segment
1.3.6.1.4.1.326.2.6.2.6.19.1.4	ColumnalipAcsCtrlDestRule	read-write	mandatory	the destination rule is assigned to the segment
1.3.6.1.4.1.326.2.6.2.6.20	TablealipFilStatStatsTable	not-accessible	mandatory	Per template static statistics from the beginning of the last system reboot.
1.3.6.1.4.1.326.2.6.2.6.20.1	RowalipFilStatStatsEntry	not-accessible	mandatory	filter statistics entry
1.3.6.1.4.1.326.2.6.2.6.20.1.1	ColumnalipFilStatStatsTemplate	read-only	mandatory	The template number for which the stats are displayed
1.3.6.1.4.1.326.2.6.2.6.20.1.2	ColumnalipFilStatStatsInPkts	read-only	mandatory	The number of packets that matched the template identified by the instance of alipFilStatStatsTemplate. The template has to be a Source template.
1.3.6.1.4.1.326.2.6.2.6.20.1.3	ColumnalipFilStatStatsOutPkts	read-only	mandatory	The number of packets that matched the template identified by the instance of alipFilStatStatsTemplate. The template has to be a Destination template.
1.3.6.1.4.1.326.2.6.2.6.21	TablealipFilDynStatsTable	not-accessible	mandatory	Per template dynamic statistics from the beginning of the last clear.
1.3.6.1.4.1.326.2.6.2.6.21.1	RowalipFilDynStatsEntry	not-accessible	mandatory	information of a specific statistic entry
1.3.6.1.4.1.326.2.6.2.6.21.1.1	ColumnalipFilDynStatsTemplate	read-only	mandatory	The template number for which the stats are displayed
1.3.6.1.4.1.326.2.6.2.6.21.1.2	ColumnalipFilDynStatsInPkts	read-only	mandatory	The number of packets that matched the template identified by the instance of alipFilDynStatsTemplate. The template has to be a Source template.
1.3.6.1.4.1.326.2.6.2.6.21.1.3	ColumnalipFilDynStatsOutPkts	read-only	mandatory	The number of packets that matched the template identified by the instance of alipFilDynStatsTemplate. The template has to be a Destination template.
1.3.6.1.4.1.326.2.6.2.6.21.1.4	ColumnalipFilDynStatsClear	write-only	mandatory	Setting the value of 1, it will clear all the stats for the template identified by the instance of alipFilDynStatsTemplate.
1.3.6.1.4.1.326.2.6.2.6.22	ScalaralipTotalFilPacketForward	read-only	mandatory	The total number of packets forwarded since last system reset.
1.3.6.1.4.1.326.2.6.2.6.23	ScalaralipTotalFilPacketBlock	read-only	mandatory	The total number of packets blocked since last system reset.
1.3.6.1.4.1.326.2.6.2.6.24	ScalaralipCurrentFilPacketForward	read-only	mandatory	The total number of packets forwarded since the last statistical clear.
1.3.6.1.4.1.326.2.6.2.6.25	ScalaralipCurrentFilPacketBlock	read-only	mandatory	The total number of packets blocked since the last statistical clear.
1.3.6.1.4.1.326.2.6.2.6.26	TablealIpInterfaceTable	not-accessible	mandatory	IP interface table corresponding to the command - interface-table.
1.3.6.1.4.1.326.2.6.2.6.26.1	RowalIpInterfaceEntry	not-accessible	mandatory	Entry of IP interface
1.3.6.1.4.1.326.2.6.2.6.26.1.1	ColumnipInterfaceNumber	read-write	mandatory	Segment number of the selecetd IP address interface entry.
1.3.6.1.4.1.326.2.6.2.6.26.1.2	ColumnipInterfaceAddress	read-write	mandatory	IP address of the selected IP segment number.
1.3.6.1.4.1.326.2.6.2.6.26.1.3	ColumnipInterfaceSubnetMask	read-write	mandatory	IP subnet mask for the selected IP address.
1.3.6.1.4.1.326.2.6.2.6.26.1.4	ColumnipInterfaceBroadCast	read-write	mandatory	Specifies style of broadcast address on a segment basis: when you specify 'br0', the hub sends an 'all-0s' broadcast; when you sepcify 'br1', the hub sends 'al…
1.3.6.1.4.1.326.2.6.2.6.26.1.5	ColumnipInterfaceCost	read-write	mandatory	Specifies an additiopnal cost of using the subnet interface. This cost is the number of extra hops to the destination. The range is 1 thru 14. The default is 0…
1.3.6.1.4.1.326.2.6.2.6.26.1.6	ColumnipInterfaceDelete	read-write	mandatory	When this object is set with value 1, the IP interface corresponds to the segment number will be deleted; otherwise this object returns value 0.
1.3.6.1.4.1.326.2.6.2.6.26.1.7	ColumnipInterfaceMtu	read-only	mandatory	Displays the maximum transimission unit size allowed on this IP interface.
1.3.6.1.4.1.326.2.6.2.6.26.1.8	ColumnipInterfaceState	read-only	mandatory	Displays the up/down status of the IP interface.
1.3.6.1.4.1.326.2.6.2.6.26.1.9	ColumnipInterfacePktsIn	read-only	mandatory	Total number of packets received on this interface.
1.3.6.1.4.1.326.2.6.2.6.26.1.10	ColumnipInterfaceOctetsIn	read-only	mandatory	Total number of bytes received on this interface.
1.3.6.1.4.1.326.2.6.2.6.26.1.11	ColumnipInterfacePktsOut	read-only	mandatory	Total number of packets transmitted to the network by this interface.
1.3.6.1.4.1.326.2.6.2.6.26.1.12	ColumnipInterfaceOctetsOut	read-only	mandatory	Total number of bytes transimitted to the network by this interface.
1.3.6.1.4.1.326.2.6.2.6.27	TablealIpRtCacheTable	not-accessible	mandatory	IP Route Cache for all ports
1.3.6.1.4.1.326.2.6.2.6.27.1	RowalIpRtCacheEntry	not-accessible	mandatory	IP Route cache for each port
1.3.6.1.4.1.326.2.6.2.6.27.1.1	ColumnipRtCachePort	read-write	mandatory	Port number for the ip route cache.
1.3.6.1.4.1.326.2.6.2.6.27.1.2	ColumnipRtCacheDstAddress	read-write	mandatory	Ip route cache destination address.
1.3.6.1.4.1.326.2.6.2.6.27.1.3	ColumnipRtCacheClear	write-only	mandatory	Setting this to Clear(1), will clear the routecache for the port and Destination address identified by the instance of ipRtCachePort and ipRtCacheDstAddress.
1.3.6.1.4.1.326.2.6.2.6.28	TablealVlanIpInterfaceTable	not-accessible	mandatory	Vlan IP interface table corresponding to the command - vlan add/del IP interface.
1.3.6.1.4.1.326.2.6.2.6.28.1	RowalVlanIpInterfaceEntry	not-accessible	mandatory	Entry of Vlan IP interface
1.3.6.1.4.1.326.2.6.2.6.28.1.1	ColumnvlanIpInterfaceNameLen	read-only	mandatory	The string length of Vlan name of the selecetd vlan IP interface entry.
1.3.6.1.4.1.326.2.6.2.6.28.1.2	ColumnvlanIpInterfaceName	read-only	mandatory	Vlan name of the selecetd vlan IP interface entry.
1.3.6.1.4.1.326.2.6.2.6.28.1.3	ColumnvlanIpInterfaceAddress	read-only	mandatory	IP address of the selected vlan IP interface entry.
1.3.6.1.4.1.326.2.6.2.6.28.1.4	ColumnvlanIpInterfaceSubnetMask	read-write	mandatory	IP subnet mask for the selected vlan IP interface entry.
1.3.6.1.4.1.326.2.6.2.6.28.1.5	ColumnvlanIpInterfaceType	read-write	mandatory	Specifies type of interface of vlan The types are are broadcast, nbma (nonBroadcastMultiAccess i.e.,CLIP), ptop (i.e.,PVC). Default is broadcast. The discontin…
1.3.6.1.4.1.326.2.6.2.6.28.1.6	ColumnvlanIpInterfaceNeighborAddress	read-write	mandatory	Specifies the ip address of neightbors of the interfaces of the vlan. This object apply only when interface type is pointToPoint.
1.3.6.1.4.1.326.2.6.2.6.28.1.7	ColumnvlanIpInterfaceRowStatus	read-write	mandatory	The status of the table. The table can not be changed when it is active.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

POWERHUB-TCPIP-MIB

Bulk Translate

Search Vendor MIBs

Search Vendor Traps