PROBE-MIB
268 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.1 | NodehpExperimental | |||
| 1.3.6.1.4.1.11.2.1.5 | Nodentd | |||
| 1.3.6.1.4.1.11.2.3 | Nodesystem | |||
| 1.3.6.1.4.1.11.2.3.7 | NodenetElement | |||
| 1.3.6.1.4.1.11.2.3.7.6 | Nodelanprobe | |||
| 1.3.6.1.4.1.11.2.3.7.6.1 | NodeechotestStatus | The SNMP trap that is generated when a LanProbe echo test status has changed and generates an event that is configured for sending SNMP traps. | ||
| 1.3.6.1.4.1.11.2.3.7.6.1 | Nodegeneral | |||
| 1.3.6.1.4.1.11.2.3.7.6.1.1 | NodeprobeAdmin | |||
| 1.3.6.1.4.1.11.2.3.7.6.1.1.1 | ScalarprobeIdentification | read-write | mandatory | A string uniquely identifying this device. |
| 1.3.6.1.4.1.11.2.3.7.6.1.1.2 | ScalarprobeFirmwareRev | read-only | mandatory | The firmware revision of this device. |
| 1.3.6.1.4.1.11.2.3.7.6.1.1.3 | ScalarprobeHardwareRev | read-only | mandatory | The hardware revision of this device. |
| 1.3.6.1.4.1.11.2.3.7.6.1.1.4 | ScalarprobeDateTime | read-write | mandatory | Probe's current date and time in the format: WWW MMM DD HH:MM:SS TTT YYYY (eg: 'Wed Jan 02 02:03:55 PST 1980'). The length of the timezone field can be from 1 … |
| 1.3.6.1.4.1.11.2.3.7.6.1.1.5 | ScalarprobeResetControl | read-write | mandatory | Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Se… |
| 1.3.6.1.4.1.11.2.3.7.6.1.1.6 | ScalarprobeDownloadFile | read-write | mandatory | The file name to be downloaded from the TFTP server. |
| 1.3.6.1.4.1.11.2.3.7.6.1.1.7 | ScalarprobeDownloadTFTPServer | read-write | mandatory | The IP address of the TFTP server that contains the boot image to load. |
| 1.3.6.1.4.1.11.2.3.7.6.1.1.8 | ScalarprobeDownloadAction | read-write | mandatory | When this object is set to downloadToRAM(2) or downloadToPROM(3), the device will discontinue its normal operation and begin download of the image specified by… |
| 1.3.6.1.4.1.11.2.3.7.6.1.1.9 | ScalarprobeDownloadStatus | read-only | mandatory | The status of the last download procedure, if any. This object will have a value of downloadStatusUnknown(3) if no download process has been performed. |
| 1.3.6.1.4.1.11.2.3.7.6.1.1.10 | ScalarprobeEchoInterval | read-write | mandatory | The probe will send an ICMP echo request (ping) to the default gateway every probeEchoInterval seconds. To force the probe not to send any echo requests, set p… |
| 1.3.6.1.4.1.11.2.3.7.6.1.1.12 | ScalarprobeFeatureDeactivate | read-only | mandatory | This integer represents ORed bit fields which can be set to deactivate certain features of a probe. Currently defined bit fields: Bit Feature To Deactivate 0 P… |
| 1.3.6.1.4.1.11.2.3.7.6.1.2 | NodecableTest | |||
| 1.3.6.1.4.1.11.2.3.7.6.1.3 | NodenodeLocation | |||
| 1.3.6.1.4.1.11.2.3.7.6.1.4 | NodeprobeView | |||
| 1.3.6.1.4.1.11.2.3.7.6.1.5 | NodermonExtension | |||
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1 | NodestatsExtension | |||
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.1 | ScalarcurrentUtilizationPeriod | read-write | mandatory | The number of seconds over which the currentUtilization object is calculated. Any change to this variable causes the value of currentUtilization to be set to a… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.2 | ScalarcurrentUtilization | read-only | mandatory | NOTE: Because, this variable has been obsoleted by the currentUtilizationTable, it will be deprecated in a future firmware release. Applications should migrate… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7 | TablecurrentUtilizationTable | not-accessible | mandatory | A table of current utilizations for multi-port probes. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1 | RowcurrentUtilizationEntry | not-accessible | mandatory | The current utilization period and current utilization for a particular interface on a multi-interface probe. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.1 | ColumncurUtilIfIndex | read-only | mandatory | The value of this object uniquely identifies the physical interface on this device for which this entry contains current utilization parameters. The interface … |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.2 | ColumncurUtilPeriod | read-write | mandatory | The number of seconds over which the current utilization object for this entry in the table is calculated. Any change to this variable causes the value of curU… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.3 | ColumncurUtil | read-only | mandatory | The best estimate of the mean physical layer network utilization on the monitor's physical interface during the previous number of seconds defined by curUtilPe… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.4 | ColumncurUtilReceive | read-only | mandatory | The best estimate of the mean physical layer network utilization on the monitor's physical interface during the previous number of seconds defined by curUtilPe… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.7.1.5 | ColumncurUtilTransmit | read-only | mandatory | The best estimate of the mean physical layer network utilization on the monitor's physical interface during the previous number of seconds defined by curUtilPe… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4 | NodehostsExtension | |||
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.1 | ScalarhostExtDuplicateNetAddresses | read-only | mandatory | This counter is incremented every time the monitor detects a second host using the same network address as another host. This object can be the target of an RM… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.2 | ScalarhostExtDuplicateNetEvent | read-write | mandatory | The index of the eventEntry in the RMON MIB that is used whenever the value of hostExtDuplicateNetAddresses changes. The eventEntry identified by a particular … |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.3 | ScalarhostExtLastDuplicateNetAddress | read-only | mandatory | The network address that was being used by two different hosts (represented by hostExtLastDuplicateHost1 and hostExtLasDuplicateHost2). The value of this objec… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.4 | ScalarhostExtLastDuplicateHost1 | read-only | mandatory | The MAC address of one of the two last hosts to be detected using a duplicate network level address. The value of this object will correspond with the detectio… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.5 | ScalarhostExtLastDuplicateHost2 | read-only | mandatory | The MAC address of the other of the two last hosts to be detected using a duplicate network level address. The value of this object will correspond with the de… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.6 | ScalarhostExtChangedNetAddresses | read-only | mandatory | This counter is incremented every time the monitor detects that a host has changed the network address it is using. It is not incremented by detection of a hos… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.7 | ScalarhostExtChangedNetEvent | read-write | mandatory | The index of the eventEntry in the RMON MIB that is used whenever the value of hostExtChangedNetAddresses changes. The eventEntry identified by a particular va… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.8 | ScalarhostExtLastChangedHost | read-only | mandatory | The MAC address of the last host which was detected to have changed the network address it was using. The value of this object will correspond with the detecti… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.9 | ScalarhostExtLastOldNetAddress | read-only | mandatory | The network address that the host represented by hostExtLastChangedHost was previously using. The value of this object will correspond with the detection event… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.10 | ScalarhostExtLastNewNetAddress | read-only | mandatory | The network address that the host represented by hostExtLastChangedHost is currently using. The value of this object will correspond with the detection event t… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.11 | TablehostExtTable | not-accessible | mandatory | A list of extensions to the RMON MIB Host Table |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.11.1 | RowhostExtEntry | not-accessible | mandatory | A collection of additional statistics for a particular host that has been discovered on an interface of this device. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.11.1.1 | ColumnhostExtIndex | read-only | mandatory | The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the host… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.11.1.2 | ColumnhostExtMacAddress | read-only | mandatory | The physical address of this host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.11.1.3 | ColumnhostExtNetAddrType | read-only | mandatory | The type of network address used in packets sent by this host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.11.1.4 | ColumnhostExtNetAddrStatus | read-only | mandatory | The level of knowledge the monitor has of the network address used by this host. Values greater than known(2) indicate that this host has used more than one ne… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.11.1.5 | ColumnhostExtNetAddress | read-only | mandatory | The network address for this host. The expected length of this object is dependent on the value of hostExtNetAddrType. If hostExtNetAddrStatus == multipleChang… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.11.1.6 | ColumnhostExtCreationOrder | read-only | mandatory | An Index that defines the relative ordering of the creation time of hosts caputed for a particular hostControlEntry. This index shall be between 1 and N, where… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.11.1.7 | ColumnhostExtLastUpdateTime | read-only | mandatory | The value of the SysUptime variable the last time that the corresponding hostEntry was updated. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.12 | TablehostTimeExtTable | not-accessible | mandatory | A list of extensions to the RMON MIB Host Time Table |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.12.1 | RowhostTimeExtEntry | not-accessible | mandatory | A collection of additional statistics for a particular host that has been discovered on an interface of this device. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.12.1.1 | ColumnhostTimeExtIndex | read-only | mandatory | The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the host… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.12.1.2 | ColumnhostTimeExtMacAddress | read-only | mandatory | The physical address of this host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.12.1.3 | ColumnhostTimeExtNetAddrType | read-only | mandatory | The type of network address used in packets sent by this host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.12.1.4 | ColumnhostTimeExtNetAddrStatus | read-only | mandatory | The level of knowledge the monitor has of the network address used by this host. Values greater than known(2) indicate that this host has used more than one ne… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.12.1.5 | ColumnhostTimeExtNetAddress | read-only | mandatory | The network address for this host. The expected length of this object is dependent on the value of hostTimeExtNetAddrType. If hostTimeExtNetAddrStatus == multi… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.12.1.6 | ColumnhostTimeExtCreationOrder | read-only | mandatory | An Index that defines the relative ordering of the creation time of hosts caputed for a particular hostControlEntry. This index shall be between 1 and N, where… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.4.12.1.7 | ColumnhostTimeExtLastUpdateTime | read-only | mandatory | The value of the SysUptime variable the last time that the corresponding hostEntry was updated. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.7 | NodefilterExtension | |||
| 1.3.6.1.4.1.11.2.3.7.6.1.5.7.2 | TablechannelExtTable | not-accessible | mandatory | A list of extensions to RMON packet channel entries. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.7.2.1 | RowchannelExtEntry | not-accessible | mandatory | A set of additional parameters for a RMON packet channel applied on a particular interface. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.7.2.1.1 | ColumnchannelExtIndex | read-only | mandatory | An index that uniquely identifies an entry in the channel table. Each such entry defines one channel, a logical data and event stream. The channel identified b… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.7.2.1.2 | ColumnchannelExtSelfPktCapture | read-write | mandatory | The value of this object indicates whether or not packets that are sent to or from the MAC address of the monitor should pass through this channel. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.7.3 | ScalarchannelExtDropEvents | read-only | mandatory | The total number of events in which packets were dropped for all channels due to lack of resources in the probe. Note that this number is not necessarily the n… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6 | NodeechoTest | |||
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1 | TableechoTestSSTable | not-accessible | mandatory | A table of instructions for and results of one-shot network connectivity tests |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1 | RowechoTestSSEntry | not-accessible | mandatory | A collection of objects that describe the form of and give the results of a one-shot connectivity test to a given host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.1 | ColumnechoTestSSIndex | read-only | mandatory | An index that uniquely identifies an entry in the echoTestSS table. Each such entry defines a single shot echo test to the node corresponding to either the mac… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.2 | ColumnechoTestSSIfIndex | read-write | mandatory | The value of this object uniquely identifies the interface on this remote network monitoring device on which the echo test will be performed. The interface ide… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.3 | ColumnechoTestSSMacAddress | read-write | mandatory | The MAC level address for this host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.4 | ColumnechoTestSSNetAddress | read-write | mandatory | The network level address for this host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.5 | ColumnechoTestSSProtocol | read-write | mandatory | The type of echo test to perform. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.6 | ColumnechoTestSSTimeout | read-write | mandatory | The number of milliseconds to wait for a reply before retransmitting the echo request packet. Note that a monitor may impose a lower bound on this object if it… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.7 | ColumnechoTestSSRetryAttempts | read-write | mandatory | The number of times to retransmit the echo request packet should a response packet not be received before echoTestSSTimeout expires. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.8 | ColumnechoTestSSLastEchoStatus | read-only | mandatory | The result of this echo test. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.9 | ColumnechoTestSSResponseNumber | read-only | mandatory | The number of echo request packets sent before a successful response packet was received. The value of this object will be non-zero only when echoTestSSLastEch… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.10 | ColumnechoTestSSResponseTime | read-only | mandatory | The number of milliseconds between the time the last echo request packet was transmitted and a response packet was received. The value of this object will be n… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.11 | ColumnechoTestSSOwner | read-write | mandatory | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1.1.12 | ColumnechoTestSSStatus | read-write | mandatory | The status of this row. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2 | TableechoTestPeriodicTable | not-accessible | mandatory | A table of instructions for and results of periodic network connectivity tests |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1 | RowechoTestPeriodicEntry | not-accessible | mandatory | A collection of objects that describe the form of and give the results of periodic connectivity tests to a given host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.1 | ColumnechoTestPeriodicIndex | read-only | mandatory | An index that uniquely identifies an entry in the echoTestPeriodic table. Each such entry defines a periodic echo test to the node corresponding to either the … |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.2 | ColumnechoTestPeriodicIfIndex | read-write | mandatory | The value of this object uniquely identifies the interface on this remote network monitoring device on which the echo test will be performed. The interface ide… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.3 | ColumnechoTestPeriodicMacAddress | read-write | mandatory | The MAC level address of this host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.4 | ColumnechoTestPeriodicNetAddress | read-write | mandatory | The network level address of this host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.5 | ColumnechoTestPeriodicProtocol | read-write | mandatory | The type of echo test to perform. Note that only one test can be selected at a time. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.6 | ColumnechoTestPeriodicTimeout | read-write | mandatory | The number of milliseconds to wait for a reply before retransmitting the echo request packet. Note that a monitor may impose a lower bound on this object if it… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.7 | ColumnechoTestPeriodicRetryAttempts | read-write | mandatory | The number of times to retransmit the echo request packet should a response packet not be received before echoTestPeriodicTimeout expires. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.8 | ColumnechoTestPeriodicNoResponseEventIndex | read-write | mandatory | The index of the eventEntry in the RMON MIB that is used whenever the value of echoTestPeriodicLastEchoStatus changes to response_timed_out(3). The eventEntry … |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.9 | ColumnechoTestPeriodicRespondedEventIndex | read-write | mandatory | The index of the eventEntry in the RMON MIB that is used whenever the value of echoTestPeriodicLastEchoStatus changes from response_timed_out(3) to response_re… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.10 | ColumnechoTestPeriodicEchoState | read-only | mandatory | The current state of testing for this echoTestPeriodicEntry. Once a successful response has been received, this object will alternate between waiting_to_echo(3… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.11 | ColumnechoTestPeriodicLastEchoStatus | read-only | mandatory | The result of the last echo test for this entry. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.12 | ColumnechoTestPeriodicTotalOperations | read-only | mandatory | The total number of times that echoTestPeriod has expired and an echo test has been initiated for this host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.13 | ColumnechoTestPeriodicSuccessfulOperations | read-only | mandatory | The total number of times that an echo test has completed successfully with the reception of a correct response packet. This number will always be less than or… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.14 | ColumnechoTestPeriodicMinRespTime | read-only | mandatory | The shortest time (in milliseconds) between request and response for all of the periodic echo tests that have been attempted for this host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.15 | ColumnechoTestPeriodicMaxRespTime | read-only | mandatory | The longest time (in milliseconds) between request and response for all of the periodic echo tests that have been attempted for this host. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.16 | ColumnechoTestPeriodicLastRespTime | read-only | mandatory | The time (in milliseconds) between request and response for the last echo test attempted for this host. If the value of echoTestPeriodicLastEchoStatus for this… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.17 | ColumnechoTestPeriodicTotalRespTime | read-only | mandatory | The sum of all the response times (in milliseconds) for all of the periodic echo tests that have been attempted for this host. This object and echoTestPeriodic… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.18 | ColumnechoTestPeriodicOwner | read-write | mandatory | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.19 | ColumnechoTestPeriodicStatus | read-write | mandatory | The status of this row. |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.20 | ColumnechoTestPeriodicSumOfSquaresTimeLo | read-only | mandatory | The sum of the square of all the response times (in milliseconds) for all of the periodic tests analogous to targetTotalResponseTime. This object, targetTotalR… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.21 | ColumnechoTestPeriodicSumOfSquaresTimeHi | read-only | mandatory | The sum of the square of all the response times (in milliseconds) for all of the periodic tests analogous to targetTotalResponseTime. This object, targetTotalR… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.22 | ColumnechoTestPeriodicFailedAttemptCount | read-only | mandatory | The total count of failed attempts |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.23 | ColumnechoTestPeriodicMinRespTime30MinInt | read-only | mandatory | Minimum response time (in milliseconds) value for the last 30 minute interval. The agent must update this object every 30 minutes, aligning to the system clock… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.24 | ColumnechoTestPeriodicMaxRespTime30MinInt | read-only | mandatory | Maximum response time (in milliseconds) value for the last 30 minute interval. The agent must update this object every 30 minutes, aligning to the system clock… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.25 | ColumnechoTestPeriodicMinRespTime5MinInt | read-only | mandatory | Minimum response time (in milliseconds) value for the last 5 minute interval. The agent must update this object every 5 minutes, aligning to the system clock a… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2.1.26 | ColumnechoTestPeriodicMaxRespTime5MinInt | read-only | mandatory | Maximum response time (in milliseconds) value for the last 5 minute interval. The agent must update this object every 5 minutes, aligning to the system clock a… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.3 | ScalarechoTestPeriod | read-write | mandatory | This object indicates how long to wait (in seconds) after completion of a pass through the echoTestPeriodic table before starting a new pass. Whenever this obj… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.4 | ScalarechoTestPeriodicCount | read-only | mandatory | This object indicates how many complete passes through the echoTestPeriodicTable have occurred since it was last restarted. Its value will be zero(0) until the… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.5 | ScalarechoTestResetSSTable | read-write | mandatory | This is a control/status object for the echoTestSSTable. When there are entries in the table, this object's value is table-in-use(3). When set to reset-the-tab… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.6 | ScalarechoTestResetPeriodicTable | read-write | mandatory | This is a control/status object for the echoTestListTable. When there are entries in the table, this object's value is table_in_use(3). When set to reset_the_t… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.7 | ScalarechoTestPeriodicTableLastEdit | read-only | mandatory | The value of sysUpTime at the time of the last edit (create, delete, or modify) to the echoTestPeriodicTable |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.8 | ScalarechoTestPeriodicTableStatus | read-write | mandatory | The status of the PeriodicTable. Only those communities with level4 access shall have access to this object. When the agent sets the status of a row in the ech… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.9 | ScalarechoTestNovellDefaultGateway | read-write | mandatory | The MAC level address of the router through which Novell Echo packets are to be forwarded, if the echo test is to be performed outside of the subnet on which t… |
| 1.3.6.1.4.1.11.2.3.7.6.1.7 | Nodecable | |||
| 1.3.6.1.4.1.11.2.3.7.6.1.8 | NodenodeLocatorII | |||
| 1.3.6.1.4.1.11.2.3.7.6.2 | NodeduplicateIP | The SNMP trap that is generated when the monitor detects a network level address is being used by two different hosts. | ||
| 1.3.6.1.4.1.11.2.3.7.6.2 | Nodelp1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.3 | NodechangedIP | The SNMP trap that is generated when the monitor detects a host has changed the network level address it is using. | ||
| 1.3.6.1.4.1.11.2.3.7.6.3 | NodelpEther | |||
| 1.3.6.1.4.1.11.2.3.7.6.3.1 | Nodelp2EtherV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.3.2 | Nodelp2EtherV2 | |||
| 1.3.6.1.4.1.11.2.3.7.6.3.3 | Nodelp3Ether | |||
| 1.3.6.1.4.1.11.2.3.7.6.4 | Nodepview | |||
| 1.3.6.1.4.1.11.2.3.7.6.5 | Nodelp2TokenRing | |||
| 1.3.6.1.4.1.11.2.3.7.6.5.2 | Nodelp2TokenRingV2 | |||
| 1.3.6.1.4.1.11.2.3.7.6.6 | NodelpFDDI | |||
| 1.3.6.1.4.1.11.2.3.7.6.6.1 | NodelpFDDIV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.6.2 | NodelpFDDIV2 | |||
| 1.3.6.1.4.1.11.2.3.7.6.7 | NodelpQ | |||
| 1.3.6.1.4.1.11.2.3.7.6.7.2 | NodelpQuadEther | |||
| 1.3.6.1.4.1.11.2.3.7.6.7.2.1 | NodelpQuadEtherV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.9 | NodelpFE | |||
| 1.3.6.1.4.1.11.2.3.7.6.9.1 | NodelpFastEther | |||
| 1.3.6.1.4.1.11.2.3.7.6.9.1.1 | NodelpFastEtherV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.10 | NodelpMultiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.10.1 | NodelpMultiportTokenRing | |||
| 1.3.6.1.4.1.11.2.3.7.6.10.1.1 | NodelpMultiportTokenRingV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.10.2 | NodelpMultiportEther | |||
| 1.3.6.1.4.1.11.2.3.7.6.10.2.1 | NodelpMultiportEtherV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.11 | NodelpT1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.11.1 | NodelpT1Multiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.11.1.1 | NodelpT1MultiportV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.12 | NodelpE1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.12.1 | NodelpE1Multiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.12.1.1 | NodelpE1MultiportV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.13 | NodelpVSeries | |||
| 1.3.6.1.4.1.11.2.3.7.6.13.1 | NodelpVSeriesMultiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.13.1.1 | NodelpVSeriesMultiportV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.14 | NodelpHSSerial | |||
| 1.3.6.1.4.1.11.2.3.7.6.14.1 | NodelpHSSI | |||
| 1.3.6.1.4.1.11.2.3.7.6.14.1.1 | NodelpHSSIV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.15 | NodelpT3 | |||
| 1.3.6.1.4.1.11.2.3.7.6.15.1 | NodelpT3Multiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.15.1.1 | NodelpT3MultiportV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.16 | NodelpATMUTP | |||
| 1.3.6.1.4.1.11.2.3.7.6.16.1 | NodelpATMUTPMultiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.16.1.1 | NodelpATMUTPMultiportV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.17 | NodelpATMOC3 | |||
| 1.3.6.1.4.1.11.2.3.7.6.17.1 | NodelpATMOC3Multiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.17.1.1 | NodelpATMOC3MultiportV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.18 | NodelpATMT3 | |||
| 1.3.6.1.4.1.11.2.3.7.6.18.1 | NodelpATMT3Multiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.18.1.1 | NodelpATMT3MultiportV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.19 | NodelpATME3 | |||
| 1.3.6.1.4.1.11.2.3.7.6.19.1 | NodelpATME3Multiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.19.1.1 | NodelpATME3MultiportV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.20 | NodelpATMOC12 | |||
| 1.3.6.1.4.1.11.2.3.7.6.20.1 | NodelpATMOC12Multiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.20.1.1 | NodelpATMOC12MultiportV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.21 | NodelpATMGigabit | |||
| 1.3.6.1.4.1.11.2.3.7.6.21.1 | NodelpATMGigabitMultiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.21.1.1 | NodelpATMGigabitMultiportV1 | |||
| 1.3.6.1.4.1.11.2.3.7.6.22 | NodelpE3 | |||
| 1.3.6.1.4.1.11.2.3.7.6.22.1 | NodelpE3Multiport | |||
| 1.3.6.1.4.1.11.2.3.7.6.22.1.1 | NodelpE3MultiportV1 | |||
| 1.3.6.1.4.1.11.2.4 | Nodeinterface | |||
| 1.3.6.1.4.1.11.2.4.4 | Nodeethernet | |||
| 1.3.6.1.4.1.11.2.4.5 | Nodeserial | |||
| 1.3.6.1.4.1.11.2.4.5.1 | TableserialConfigTable | not-accessible | mandatory | A table of Serial interface configuration entries. |
| 1.3.6.1.4.1.11.2.4.5.1.1 | RowserialConfigEntry | not-accessible | mandatory | A set of configuration parameters for a particular serial interface on this device. |
| 1.3.6.1.4.1.11.2.4.5.1.1.1 | ColumnserialIfIndex | read-only | mandatory | The value of this object uniquely identifies the serial interface on this device for which this entry contains configuration parameters. The interface identifi… |
| 1.3.6.1.4.1.11.2.4.5.1.1.2 | ColumnserialIpAddress | read-write | mandatory | The IP address of this serial interface. |
| 1.3.6.1.4.1.11.2.4.5.1.1.3 | ColumnserialSubnetMask | read-write | mandatory | The IP subnet mask of this serial interface. |
| 1.3.6.1.4.1.11.2.4.5.1.1.4 | ColumnserialMode | read-write | mandatory | The type of incoming connection to expect on this serial interface. |
| 1.3.6.1.4.1.11.2.4.5.1.1.5 | ColumnserialProtocol | read-write | mandatory | The type of data link encapsulation to be used on this serial interface. |
| 1.3.6.1.4.1.11.2.4.5.1.1.6 | ColumnserialSpeed | read-write | mandatory | The data rate to configure this serial interface to on startup as well as after each serial connection. |
| 1.3.6.1.4.1.11.2.4.5.1.1.7 | ColumnserialTimeout | read-write | mandatory | This timeout value is used when the Management Station has initiated the conversation over the serial link. This variable represents the number of seconds of i… |
| 1.3.6.1.4.1.11.2.4.5.1.1.8 | ColumnserialModemInitString | read-write | mandatory | A control string which controls how a modem attached to this serial interface should be initialized. The initialization is performed once during startup and ag… |
| 1.3.6.1.4.1.11.2.4.5.1.1.9 | ColumnserialModemHangUpString | read-write | mandatory | A control string which specifies how to disconnect a modem connection on this serial interface. This object is only meaningful if the associated serialMode has… |
| 1.3.6.1.4.1.11.2.4.5.1.1.10 | ColumnserialModemConnectResp | read-write | mandatory | An ASCII string conntaining substrings that desribe the expected modem connection response code and associated bps rate. The substrings are delimited by the fi… |
| 1.3.6.1.4.1.11.2.4.5.1.1.11 | ColumnserialModemNoConnectResp | read-write | mandatory | An ASCII string containing response codes that may be generated by a modem to report the reason why a connection attempt has failed. The response codes are del… |
| 1.3.6.1.4.1.11.2.4.5.1.1.12 | ColumnserialFlowControl | read-write | mandatory | The type of flow control to use on this serial interface. |
| 1.3.6.1.4.1.11.2.4.5.1.1.13 | ColumnserialTrapTimeout | read-write | mandatory | This timeout value is used when the probe initiates the serial connection with the intention of sending a trap. This variable represents the number of seconds … |
| 1.3.6.1.4.1.11.2.4.6 | Nodenet | |||
| 1.3.6.1.4.1.11.2.4.6.1 | TablenetConfigTable | not-accessible | mandatory | A table of network configuration entries. |
| 1.3.6.1.4.1.11.2.4.6.1.1 | RownetConfigEntry | not-accessible | mandatory | A set of configuration parameters for a particular network interface on this device. |
| 1.3.6.1.4.1.11.2.4.6.1.1.1 | ColumnnetConfigIfIndex | read-only | mandatory | The value of this object uniquely identifies the physical interface on this device for which this entry contains configuration parameters. The interface identi… |
| 1.3.6.1.4.1.11.2.4.6.1.1.2 | ColumnnetConfigIfSpeed | read-only | mandatory | The value of this object indicates the speed of the media. This is equivalent to the MIB-2 object ifSpeed. |
| 1.3.6.1.4.1.11.2.4.6.1.1.3 | ColumnnetConfigIPAddress | read-write | mandatory | The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then w… |
| 1.3.6.1.4.1.11.2.4.6.1.1.4 | ColumnnetConfigSubnetMask | read-write | mandatory | The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then … |
| 1.3.6.1.4.1.11.2.4.6.1.1.5 | ColumnnetConfigRingNumber | read-write | mandatory | The value of this object uniquely identifies the physical ring number on which the probe resides. This variable is only meaningful on a Token Ring probe. If th… |
| 1.3.6.1.4.1.11.2.4.6.1.1.6 | ColumnnetConfigPortType | read-write | mandatory | This object indicates whether or not the port for this row (indicated in netConfigIfIndex) is monitor only or can transmit as well. If this port is monitorOnly… |
| 1.3.6.1.4.1.11.2.4.6.1.1.7 | ColumnnetConfigDefaultGateway | read-write | mandatory | The IP Address of the default gateway for this Net interface. |
| 1.3.6.1.4.1.11.2.4.6.1.1.8 | ColumnnetConfigPhysicalConnector | read-write | mandatory | The value of this object indicates the type of physical connector which is currently being used to connect the interface to the network. |
| 1.3.6.1.4.1.11.2.4.6.1.1.9 | ColumnnetConfigLinkSpeed | read-write | mandatory | Indicates the speed of the media (in one direction). For Fast Ethernet auto-negotiation and Token-Ring speed auto-detection, this value should be set to auto-n… |
| 1.3.6.1.4.1.11.2.4.6.1.1.10 | ColumnnetConfigDuplex | read-write | mandatory | Indicates whether the interface supports half or full duplex mode. When LinkSpeed is set to auto-negotiate, this field has no effect. It will be set to the neg… |
| 1.3.6.1.4.1.11.2.4.6.1.1.11 | ColumnnetConfigLineCode | read-write | mandatory | Line coding. The choices for this field are: B8ZS - Binary 8 Zeros Suppress. Used with more recent ESF T1 framing. Commonly used in 64 Kbps, fractional T1 and … |
| 1.3.6.1.4.1.11.2.4.6.1.1.12 | ColumnnetConfigFramingType | read-write | mandatory | Framing type. The choices for this field are: ESF - Extended Super Frame (24 frames/ESF). Valid for T1. D4 - Conventional Super Frame (12 frames/SF). Valid for… |
| 1.3.6.1.4.1.11.2.4.6.1.1.13 | ColumnnetConfigChannelRate | read-write | mandatory | Channel Rate. The choices for this field are: 56K - Valid for T1. 64K - Valid for T1/E1. 1536bps - Valid for Channelized T3. This field applies only to the T1,… |
| 1.3.6.1.4.1.11.2.4.6.1.1.14 | ColumnnetConfigDataChannel | read-write | mandatory | This integer represents the ORed bit fields which can be set to indicate that the probe should monitor the specified channel on the incoming data line. A value… |
| 1.3.6.1.4.1.11.2.4.6.1.1.15 | ColumnnetConfigDataSense | read-write | mandatory | Indicates whether the bits on the channel(s) being tested are inverted. A Mark is a signal pulse on the line. A Space is a bit time with no pulse. The choices … |
| 1.3.6.1.4.1.11.2.4.6.1.1.16 | ColumnnetConfigLinkLayerType | read-write | mandatory | Indicates the type of link layer analysis to be performed on the incoming data. This field applies only to WanProbes and ATMProbes |
| 1.3.6.1.4.1.11.2.4.6.1.1.17 | ColumnnetConfigNetworkInterface | read-write | mandatory | ATM network interface addressing mode. Valid values for this field are: NNI - Network to Network Interface. The Network to Network Interface (or Network to Nod… |
| 1.3.6.1.4.1.11.2.4.6.1.1.18 | ColumnnetConfigCellSynchronization | read-write | mandatory | ATM network interface addressing mode. Valid values for this field are: HEC - The Header Error Control (DEC) is an 8-bit field and the fifth byte in the header… |
| 1.3.6.1.4.1.11.2.4.6.1.1.19 | ColumnnetConfigReceiverMode | read-write | mandatory | Line: When monitoring, the selected challes are presented as the line and equipment signals for decoding and statistics. All changes are regenerated and passed… |
| 1.3.6.1.4.1.11.2.4.6.1.1.20 | ColumnnetConfigMaximumFrameSize | read-write | mandatory | The size of the buffer to be allocated at the physical layer for the reception of a frame from the network. Any frames which are longer than the maximum frame … |
| 1.3.6.1.4.1.11.2.4.6.2 | ScalarnetDefaultGateway | read-write | mandatory | NOTE: Because, this variable has been obsoleted by the variable netConfigDefaultGateway, it will be deprecated in a future firmware release. Applications shoul… |
| 1.3.6.1.4.1.11.2.4.7 | NodetokenRing | |||
| 1.3.6.1.4.1.11.2.4.7.1 | ScalartokenRingSpeed | read-write | mandatory | NOTE: Because, this variable has been obsoleted by the netConfigLinkSpeed and netConfigIfSpeed, it will be deprecated in a future firmware release. Application… |
| 1.3.6.1.4.1.11.2.13 | Nodesnmp | |||
| 1.3.6.1.4.1.11.2.13.1 | Nodetrap | |||
| 1.3.6.1.4.1.11.2.13.1.3 | Nodedelivery | |||
| 1.3.6.1.4.1.11.2.13.1.3.3 | TabletrapDestTable | not-accessible | mandatory | A list of trap destination entries. |
| 1.3.6.1.4.1.11.2.13.1.3.3.1 | RowtrapDestEntry | not-accessible | mandatory | This entry includes a destination IP address to which to send traps for this community. It also includes a backup address in case the primary address does not … |
| 1.3.6.1.4.1.11.2.13.1.3.3.1.1 | ColumntrapDestIndex | read-only | mandatory | A value that uniquely identifies this trapDestEntry. |
| 1.3.6.1.4.1.11.2.13.1.3.3.1.2 | ColumntrapDestCommunity | read-write | mandatory | A community to which these destination IP addresses belong. This entry is associated with any eventEntries in the RMON MIB whose value of eventCommunity is equ… |
| 1.3.6.1.4.1.11.2.13.1.3.3.1.3 | ColumntrapDestDeliveryType | read-write | mandatory | If this object has the value one-shot(1), then the trap will be sent only once to the primary address without requiring acknowledgement. If this object has the… |
| 1.3.6.1.4.1.11.2.13.1.3.3.1.4 | ColumntrapDestPrimaryIpAddress | read-write | mandatory | The primary IP address to which to send traps. This object may not be modifed if the associated trapDestStatus object is equal to valid(1). |
| 1.3.6.1.4.1.11.2.13.1.3.3.1.5 | ColumntrapDestPrimaryIfIndex | read-write | mandatory | The value of this object uniquely identifies the interface on this device through which the host at trapPrimaryIpAddress can be reached. The interface identifi… |
| 1.3.6.1.4.1.11.2.13.1.3.3.1.8 | ColumntrapDestOwner | read-write | mandatory | The owner of this trap destination entry. |
| 1.3.6.1.4.1.11.2.13.1.3.3.1.9 | ColumntrapDestStatus | read-write | mandatory | The status of this trap destination entry. |
| 1.3.6.1.4.1.11.2.13.5 | Nodecommunity | |||
| 1.3.6.1.4.1.11.2.13.5.1 | NodeaccessControl | |||
| 1.3.6.1.4.1.11.2.13.5.1.1 | TablecommAccessTable | not-accessible | mandatory | A list of community access entries |
| 1.3.6.1.4.1.11.2.13.5.1.1.1 | RowcommAccessEntry | not-accessible | mandatory | A mapping of community name to access rights. |
| 1.3.6.1.4.1.11.2.13.5.1.1.1.1 | ColumncommAccessIndex | read-only | mandatory | A unique index for this entry. |
| 1.3.6.1.4.1.11.2.13.5.1.1.1.2 | ColumncommAccessCommunity | read-write | mandatory | The community string to which this entry grants access. This string must be unique among the community strings defined in all entries of this table. This objec… |
| 1.3.6.1.4.1.11.2.13.5.1.1.1.3 | ColumncommAccessLevel | read-write | mandatory | The access level for this community string. This object may not be modifed if the associated commAccessStatus object is equal to valid(1). |
| 1.3.6.1.4.1.11.2.13.5.1.1.1.4 | ColumncommAccessOwner | read-write | mandatory | The owner of this serial connection entry. |
| 1.3.6.1.4.1.11.2.13.5.1.1.1.5 | ColumncommAccessStatus | read-write | mandatory | The status of this community access entry. When this object is set to valid(1), if the commAccessCommunity for this row is not unique among commAccessCommunity… |
| 1.3.6.1.4.1.11.2.13.5.1.2 | TableclientTable | not-accessible | mandatory | A list of client entries. |
| 1.3.6.1.4.1.11.2.13.5.1.2.1 | RowclientEntry | not-accessible | mandatory | A configuration that allows an SNMP community to send packets from a particular IP address. |
| 1.3.6.1.4.1.11.2.13.5.1.2.1.1 | ColumnclientIndex | read-only | mandatory | A value that uniquely identifies this client entry. |
| 1.3.6.1.4.1.11.2.13.5.1.2.1.2 | ColumnclientIpAddress | read-write | mandatory | An IP Address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP address is ANDed w… |
| 1.3.6.1.4.1.11.2.13.5.1.2.1.3 | ColumnclientIpMask | read-write | mandatory | A mask to be ANDed with the requesting entity's IP address before comparison with clientIpAddress. If the result matches with clientIpAddress, then the address… |
| 1.3.6.1.4.1.11.2.13.5.1.2.1.4 | ColumnclientCommunity | read-write | mandatory | The community that can be used by the client represented by the associated IP Address. This object may not be modifed if the associated clientStatus object is … |
| 1.3.6.1.4.1.11.2.13.5.1.2.1.5 | ColumnclientOwner | read-write | mandatory | The owner of this client entry. |
| 1.3.6.1.4.1.11.2.13.5.1.2.1.6 | ColumnclientStatus | read-write | mandatory | The status of this client entry. |
| 1.3.6.1.4.1.11.2.15 | Nodeslip | |||
| 1.3.6.1.4.1.11.2.15.5 | TableserialConnectionTable | not-accessible | mandatory | A list of serial connection entries. |
| 1.3.6.1.4.1.11.2.15.5.1 | RowserialConnectionEntry | not-accessible | mandatory | Configuration for a SLIP link over a serial line. |
| 1.3.6.1.4.1.11.2.15.5.1.1 | ColumnserialConnectIndex | read-only | mandatory | A value that uniquely identifies this serialConnection entry. |
| 1.3.6.1.4.1.11.2.15.5.1.2 | ColumnserialConnectDestIpAddress | read-write | mandatory | The IP Address that can be reached at the other end of this serial connection. This object may not be modifed if the associated serialConnectStatus object is e… |
| 1.3.6.1.4.1.11.2.15.5.1.3 | ColumnserialConnectType | read-write | mandatory | The type of outgoing connection to make. If this object has the value direct(1), then a direct serial connection is assumed. If this object has the value modem… |
| 1.3.6.1.4.1.11.2.15.5.1.4 | ColumnserialConnectDialString | read-write | mandatory | A control string which specifies how to dial the phone number in order to establish a modem connection. The string should include dialing prefix and suffix. Fo… |
| 1.3.6.1.4.1.11.2.15.5.1.5 | ColumnserialConnectSwitchConnectSeq | read-write | mandatory | A control string which specifies how to establish a data switch connection. This object may not be modifed if the associated serialConnectStatus object is equa… |
| 1.3.6.1.4.1.11.2.15.5.1.6 | ColumnserialConnectSwitchDisconnectSeq | read-write | mandatory | A control string which specifies how to terminate a data switch connection. This object may not be modifed if the associated serialConnectStatus object is equa… |
| 1.3.6.1.4.1.11.2.15.5.1.7 | ColumnserialConnectSwitchResetSeq | read-write | mandatory | A control string which specifies how to reset a data switch in the event of a timeout. This object may not be modifed if the associated serialConnectStatus obj… |
| 1.3.6.1.4.1.11.2.15.5.1.8 | ColumnserialConnectOwner | read-write | mandatory | The owner of this serial connection entry. |
| 1.3.6.1.4.1.11.2.15.5.1.9 | ColumnserialConnectStatus | read-write | mandatory | The status of this serial connection entry. If the manager attempts to set this object to valid(1) when the serialConnectType is set to modem(2) or modem-switc… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AccessLevel | INTEGER { level1(1), level2(2), level3(3), level4(4) } |