PROTEON-MIB
112 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1213-MIB | DisplayString ifIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1 | Nodeproteon | |||
| 1.3.6.1.4.1.1.1 | NodeproAdmin | |||
| 1.3.6.1.4.1.1.1 | NodeproElsTrapV1 | An ELS trap event. | ||
| 1.3.6.1.4.1.1.1.1 | NodeproSysObjId | |||
| 1.3.6.1.4.1.1.1.1.1 | ScalarproElsTrapSeqs | read-only | deprecated | ELS trap sequence number |
| 1.3.6.1.4.1.1.1.1.2 | ScalarproElsTrapSubSystem | read-only | deprecated | ELS trap subsystem number |
| 1.3.6.1.4.1.1.1.1.3 | ScalarproElsTrapEvent | read-only | deprecated | ELS trap event number |
| 1.3.6.1.4.1.1.1.1.5 | NodeproElsTrapVar1 | |||
| 1.3.6.1.4.1.1.1.1.6 | NodeproElsTrapVar2 | |||
| 1.3.6.1.4.1.1.1.1.7 | NodeproElsTrapVar3 | |||
| 1.3.6.1.4.1.1.1.1.8 | NodeproElsTrapVar4 | |||
| 1.3.6.1.4.1.1.1.1.9 | NodeproElsTrapVar5 | |||
| 1.3.6.1.4.1.1.1.1.10 | NodeproElsTrapVar6 | |||
| 1.3.6.1.4.1.1.1.1.11 | NodeproElsTrapVar7 | |||
| 1.3.6.1.4.1.1.1.1.12 | NodeproElsTrapVar8 | |||
| 1.3.6.1.4.1.1.1.1.13 | NodeproElsTrapVar9 | |||
| 1.3.6.1.4.1.1.1.1.41 | NodeproSysObjIdP4100 | |||
| 1.3.6.1.4.1.1.1.1.42 | NodeproSysObjIdP4200 | |||
| 1.3.6.1.4.1.1.1.1.43 | NodeproSysObjIdDNX300 | |||
| 1.3.6.1.4.1.1.1.1.44 | NodeproSysObjIdCNX400 | |||
| 1.3.6.1.4.1.1.1.1.46 | NodeproSysObjIdCNX600 | |||
| 1.3.6.1.4.1.1.1.1.47 | NodeproSysObjIdRBX200 | |||
| 1.3.6.1.4.1.1.1.1.49 | NodeproSysObjIdCNX500 | |||
| 1.3.6.1.4.1.1.1.1.50 | NodeproSysObjIdRBX250 | |||
| 1.3.6.1.4.1.1.1.1.53 | NodeproSysObjIdBOSS3Slot | |||
| 1.3.6.1.4.1.1.1.1.54 | NodeproSysObjIdBOSSs90 | |||
| 1.3.6.1.4.1.1.1.2 | NodeproStatus | |||
| 1.3.6.1.4.1.1.1.2.1 | ScalarproStatusReloadTime | read-only | mandatory | The time (in hundredths of a second) since the last time the router software was reloaded. |
| 1.3.6.1.4.1.1.1.2.2 | ScalarproStatusStarts | read-only | mandatory | The number of times the router has started since the last reload. |
| 1.3.6.1.4.1.1.1.2.3 | ScalarproStatusCrashes | read-only | mandatory | The number of times the router has crashed since the last reload. Only those crashes that caused the router to deliberately restart due to a software error are… |
| 1.3.6.1.4.1.1.1.2.4 | ScalarproStatusCrashMsg | read-only | mandatory | The last crash message. The message will indicate if the router has not crashed since the last reload. |
| 1.3.6.1.4.1.1.1.5 | NodeproPriv | |||
| 1.3.6.1.4.1.1.1.5.2 | ScalarproActionReset | read-write | mandatory | This object, when read, returns a value of zero. A set of this object causes the router to be reset. The value represents the delay (in seconds) before the res… |
| 1.3.6.1.4.1.1.1.5.4 | ScalarproActionReload | read-write | mandatory | This object, when read, returns a value of zero. A set of this object causes the router to be reloaded. The value represents the delay (in seconds) before the … |
| 1.3.6.1.4.1.1.2 | NodeproElsTrapV2 | An ELS trap event. proElsSubSysEventMsg provides a textual description of the event. | ||
| 1.3.6.1.4.1.1.6 | NodeproSystem | |||
| 1.3.6.1.4.1.1.6.1 | NodeproResource | |||
| 1.3.6.1.4.1.1.6.1.1 | NodeproResMemory | |||
| 1.3.6.1.4.1.1.6.1.1.1 | NodeproResMemHeap | |||
| 1.3.6.1.4.1.1.6.1.1.1.1 | ScalarproResMemHeapTotal | read-only | mandatory | The total number of bytes of heap memory available for allocation. |
| 1.3.6.1.4.1.1.6.1.1.1.2 | ScalarproResMemHeapReserve | read-only | mandatory | The minimum amount of memory needed by the currently configured protocols and features. |
| 1.3.6.1.4.1.1.6.1.1.1.3 | ScalarproResMemHeapNeverAlloc | read-only | mandatory | The memory that has never been allocated. |
| 1.3.6.1.4.1.1.6.1.1.1.4 | ScalarproResMemHeapPermAlloc | read-only | mandatory | The memory that is permanently allocated to router tasks. |
| 1.3.6.1.4.1.1.6.1.1.1.5 | ScalarproResMemHeapTempAlloc | read-only | mandatory | The memory that is temporarily allocated to router tasks. |
| 1.3.6.1.4.1.1.6.1.1.1.6 | ScalarproResMemHeapPrevAlloc | read-only | mandatory | The memory that was temporarily allocated and returned to the free pool. |
| 1.3.6.1.4.1.1.6.1.1.2 | NodeproResMemBuf | |||
| 1.3.6.1.4.1.1.6.1.1.2.1 | ScalarproResMemBufTotal | read-only | mandatory | The total number of bytes of buffer memory available for allocation. |
| 1.3.6.1.4.1.1.6.1.1.2.2 | ScalarproResMemBufReserve | read-only | mandatory | The minimum amount of memory needed by the currently configured protocols and features. |
| 1.3.6.1.4.1.1.6.1.1.2.3 | ScalarproResMemBufNeverAlloc | read-only | mandatory | The memory that has never been allocated. |
| 1.3.6.1.4.1.1.6.1.1.2.4 | ScalarproResMemBufPermAlloc | read-only | mandatory | The memory that is permanently allocated to router tasks. |
| 1.3.6.1.4.1.1.6.1.2 | NodeproResBuffers | |||
| 1.3.6.1.4.1.1.6.1.2.1 | NodeproResBufGlobal | |||
| 1.3.6.1.4.1.1.6.1.2.1.1 | ScalarproResBufGlobalTotal | read-only | mandatory | The total number of global buffers in the system. |
| 1.3.6.1.4.1.1.6.1.2.1.2 | ScalarproResBufGlobalFree | read-only | mandatory | The total number of free buffers in the system. |
| 1.3.6.1.4.1.1.6.1.2.1.3 | ScalarproResBufGlobalFair | read-only | mandatory | The 'fair' number of buffers for each interface. |
| 1.3.6.1.4.1.1.6.1.2.1.4 | ScalarproResBufGlobalLow | read-only | mandatory | The low mark for free buffers. If the value of proResBufGlobalFree is less than this object then freed buffers will not be placed on any queue that has more th… |
| 1.3.6.1.4.1.1.6.1.2.2 | TableproResBufTable | not-accessible | mandatory | The per-port buffer table. |
| 1.3.6.1.4.1.1.6.1.2.2.1 | RowproResBufTableEntry | not-accessible | mandatory | An entry indicating the buffers allocated per interface. |
| 1.3.6.1.4.1.1.6.1.2.2.1.1 | ColumnproResInputBufsReq | read-only | mandatory | The number of buffers requested for this interface. |
| 1.3.6.1.4.1.1.6.1.2.2.1.2 | ColumnproResInputBufsAlloc | read-only | mandatory | The number of buffers allocated for this interface. |
| 1.3.6.1.4.1.1.6.1.2.2.1.3 | ColumnproResInputBufsLow | read-only | mandatory | The low water mark for number of buffers. |
| 1.3.6.1.4.1.1.6.1.2.2.1.4 | ColumnproResInputBufsCurrent | read-only | mandatory | The current number of buffers for this device. A value of zero indicates that the device is disabled. If, on receipt of a packet, the value of this object is l… |
| 1.3.6.1.4.1.1.6.1.2.2.1.5 | ColumnproResInputBufsSize | read-only | mandatory | The size, in bytes, of each buffer allocated to this interface. |
| 1.3.6.1.4.1.1.6.1.2.2.1.6 | ColumnproResInputBufsTotalBytes | read-only | mandatory | The total number of bytes allocated to this interface. This is obtained by multiplying proResInputBufsAlloc by proResInputBufsSize. |
| 1.3.6.1.4.1.1.6.2 | NodeproEls | |||
| 1.3.6.1.4.1.1.6.2.1 | NodeproElsGeneric | |||
| 1.3.6.1.4.1.1.6.2.1.1 | ScalarproElsPin | read-write | mandatory | The number of ELS enterprise specific traps which may be generated per second. A value of zero indicates no limit. This object reflects the operational pin val… |
| 1.3.6.1.4.1.1.6.2.1.2 | ScalarproElsDropped | read-only | mandatory | The number of ELS enterprise specific traps which were not sent because the pin had been reached. |
| 1.3.6.1.4.1.1.6.2.1.3 | ScalarproElsTimestamp | read-write | mandatory | This object indicates whether ELS messages should be timestamped and, if yes, the timebase to use. Setting the object to proTSOff(1) disables timestamping. Set… |
| 1.3.6.1.4.1.1.6.2.1.4 | ScalarproElsAction | read-write | mandatory | A read of this object always returns the value other(1). Setting the object to elsActionClear(2) clears all ELS configuration. Specifically, this clears all EL… |
| 1.3.6.1.4.1.1.6.2.1.5 | ScalarproElsTrapVersion | read-write | mandatory | The format of the ELS trap has been changed so that the trap info is more useful to a majority of net managers. It now contains the fully constructed ELS messa… |
| 1.3.6.1.4.1.1.6.2.2 | TableproElsSubSysTable | not-accessible | mandatory | The ELS sub-system table. |
| 1.3.6.1.4.1.1.6.2.2.1 | RowproElsSubSysTableEntry | not-accessible | mandatory | An entry corresponding to a specific subsystem. |
| 1.3.6.1.4.1.1.6.2.2.1.1 | ColumnproElsSubSysIndex | read-only | mandatory | This object is used to identify a specific subsystem. |
| 1.3.6.1.4.1.1.6.2.2.1.2 | ColumnproElsSubSysDescr | read-only | mandatory | This is a textual string indicating the name of the subsystem. |
| 1.3.6.1.4.1.1.6.2.2.1.3 | ColumnproElsSubSysNumEvents | read-only | mandatory | The number of events defined for this subsystem. |
| 1.3.6.1.4.1.1.6.2.2.1.4 | ColumnproElsSubSysDisplayEnable | read-write | mandatory | A read of this object always returns the value other(1). To check the current value, use the proElsSubSysCurrDisplayLevel variable. A SET of this object to one… |
| 1.3.6.1.4.1.1.6.2.2.1.5 | ColumnproElsSubSysDisplayDisable | read-write | mandatory | A read of this object always returns the value other(1). To check the current value, use the proElsSubSysCurrDisplayLevel variable. A SET of this object to one… |
| 1.3.6.1.4.1.1.6.2.2.1.6 | ColumnproElsSubSysTrapEnable | read-write | mandatory | A read of this object always returns the value other(1). To check the current value, use the proElsSubSysCurrTrapLevel variable. A SET of this object to one of… |
| 1.3.6.1.4.1.1.6.2.2.1.7 | ColumnproElsSubSysTrapDisable | read-write | mandatory | A read of this object always returns the value other(1). To check the current value, use the proElsSubSysCurrTrapLevel variable. A SET of this object to one of… |
| 1.3.6.1.4.1.1.6.2.2.1.8 | ColumnproElsSubSysCurrDisplayLevel | read-only | mandatory | The current event log levels that are enabled for display to console. This information reflects the configuration values not the current operational parameters… |
| 1.3.6.1.4.1.1.6.2.2.1.9 | ColumnproElsSubSysCurrTrapLevel | read-only | mandatory | The current event log levels that are enabled for sending via SNMP trap. This information reflects the configuration values not the current operational paramet… |
| 1.3.6.1.4.1.1.6.2.3 | TableproElsSubSysEventTable | not-accessible | mandatory | The ELS Sub system event table. |
| 1.3.6.1.4.1.1.6.2.3.1 | RowproElsSubSysEventTableEntry | not-accessible | mandatory | An entry corresponding to a specific event in the particular subsystem. |
| 1.3.6.1.4.1.1.6.2.3.1.1 | ColumnproElsSubSysEventIndex | read-only | mandatory | The identifier of the event message for a given subsystem. |
| 1.3.6.1.4.1.1.6.2.3.1.2 | ColumnproElsSubSysEventMsg | read-only | mandatory | The unformatted textual description for the message. It provides the message text related to this event and indiates where specific information will be filled … |
| 1.3.6.1.4.1.1.6.2.3.1.3 | ColumnproElsSubSysEventCount | read-only | mandatory | The number of times this event has occurred. This number will increment even if the event is not enabled to be displayed on the console or sent in an SNMP trap. |
| 1.3.6.1.4.1.1.6.2.3.1.4 | ColumnproElsSubSysEventLogLevel | read-only | mandatory | The pre-defined setting that classifies this message. |
| 1.3.6.1.4.1.1.6.2.3.1.5 | ColumnproElsSubSysEventLogToConsole | read-write | mandatory | This object indicates whether this event should be logged to the console. For 2210 platform, this SET changes the configuration parameters and also immediately… |
| 1.3.6.1.4.1.1.6.2.3.1.6 | ColumnproElsSubSysEventLogToTrap | read-write | mandatory | This object indicates whether this event should be sent as an SNMP trap. For 2210 platform, this SET changes the configuration parameters and also immediately … |
| 1.3.6.1.4.1.1.6.3 | NodeproTemp | |||
| 1.3.6.1.4.1.1.6.3.1 | ScalarproTempScale | read-only | mandatory | Indicates the scale used when reporting temperature values. If Celsius(1), all temperature values are in degrees Celsius. If Fahrenheit(2), all temperature val… |
| 1.3.6.1.4.1.1.6.3.2 | ScalarproMaxHwTemp | read-only | mandatory | This attribute indicates the maximum temperature that the thermometer system can record. This attribute is used as an upper bound for all temperature ranges. |
| 1.3.6.1.4.1.1.6.3.3 | ScalarproMinHwTemp | read-only | mandatory | This attribute indicates the minimum temperature that the thermometer system can record. This attribute is used as a lower bound for all temperature ranges. |
| 1.3.6.1.4.1.1.6.3.4 | ScalarproTempPollPeriod | read-only | mandatory | This attribute determines how often the thermometer system will recalculate the current temperature and any temperature range checks. This value represents tim… |
| 1.3.6.1.4.1.1.6.3.5 | ScalarproCurrentTemp | read-only | mandatory | The current ambient temperature of the system. This value is recalculated by the system once per proTempPollPeriod. |
| 1.3.6.1.4.1.1.6.3.6 | ScalarproLowTempThreshold | read-only | mandatory | The temperature that will cause a Low Temperature Condition to become true. The Low Temperature Condition will become true when: proCurrentTemp <= proLowTempTh… |
| 1.3.6.1.4.1.1.6.3.7 | ScalarproHighTempThreshold | read-only | mandatory | The temperature that will cause a High Temperature Condition to become true. The High Temperature Condition will become true when: proCurrentTemp >= proHighTem… |
| 1.3.6.1.4.1.1.6.3.8 | ScalarproTempHysteresis | read-only | mandatory | The number of degrees that the current ambient temperature must drop below proHighTempThreshold or above proLowTempTheshold before the threshold's condition is… |
| 1.3.6.1.4.1.1.6.3.9 | ScalarproHighTempCondition | read-only | mandatory | Indicates whether a High Temperature Condition is active. This attribute will be set ON(2) if a High Temperature Condition is active. |
| 1.3.6.1.4.1.1.6.3.10 | ScalarproLowTempCondition | read-only | mandatory | Indicates whether a Low Temperature Condition is active. This attribute will be set ON(2) if a Low Temperature Condition is active. |
| 1.3.6.1.4.1.1.6.3.11 | ScalarproHighestTemp | read-only | mandatory | This is the highest temperature recorded by the router since last reset. |
| 1.3.6.1.4.1.1.6.3.12 | ScalarproHighTempTime | read-only | mandatory | This is the time (in hundreds of seconds) that has elapsed since proHighestTemp was last recorded. |
| 1.3.6.1.4.1.1.6.3.13 | ScalarproLowestTemp | read-only | mandatory | This is the lowest temperature recorded by the router since last reset. |
| 1.3.6.1.4.1.1.6.3.14 | ScalarproLowTempTime | read-only | mandatory | This is the time (in hundreds of seconds) that has elapsed since proLowestTemp was last recorded. |
| 1.3.6.1.4.1.1.6.4 | NodeproConfig | |||
| 1.3.6.1.4.1.1.6.4.1 | NodeproCfgLoad | |||
| 1.3.6.1.4.1.1.6.4.1.1 | ScalarproCfgProtocols | read-only | mandatory | This object returns an ASCII string containing the short names of all protocol types supported in the current load. |
| 1.3.6.1.4.1.1.6.4.1.2 | ScalarproCfgDatalinks | read-only | mandatory | This object returns an ASCII string containing the short names of all datalink/MAC types supported in the current load. |
| 1.3.6.1.4.1.1.6.4.1.3 | ScalarproCfgFeatures | read-only | mandatory | This object returns an ASCII string containing the short names of all router features supported in the current load. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ProElsLogStatus | INTEGER { proElsLogDisabled(1), proElsLogEnabled(2) } | ||
| ProElsMsgLogLevel | INTEGER { other(1), proMsgLevelUIError(2), proMsgLevelCIError(3), proMsgLevelUEError(4), proMsgLevelCEError(5), proMsgLevelError(6), proMsgLevelUInfo(7), proMsgLevelCInfo(8), proMsgLevelInfo(9), proMsgLevelPTrace(10), proMsgLevelUTrace(11), proMsgLevelCTrace(12), proMsgLevelTrace(13), proMsgLevelAlways(14), proMsgLevelStandard(15), proMsgLevelAll(16) } |