PSA-LIN-MIB
99 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.211 | Nodefujitsu | |||
| 1.3.6.1.4.1.211.1 | Nodeproducts | |||
| 1.3.6.1.4.1.211.1.31 | NodeiaServer | |||
| 1.3.6.1.4.1.211.1.31.1 | Nodeprimequest | |||
| 1.3.6.1.4.1.211.1.31.1.2 | Nodepartition | |||
| 1.3.6.1.4.1.211.1.31.1.2.100 | NodepartitionCommon | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.1 | NodephysicalComponent | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.2 | NodelogicalComponentForLinux | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.2.1 | NodelinLogicalCpuInfo | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.2.1.1 | TablelinLogcalCpuTable | not-accessible | mandatory | Table with logical CPU information |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.1.1.1 | RowlinLogicalCpuEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.1.1.1.1 | ColumnlinLgCpuNumber | read-only | mandatory | Logical identification number that OS allots to the CPU.(index: 0based) |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.1.6 | ScalarlinNumOfLogicalCpus | read-only | mandatory | Number of effective logical CPUs in the partition. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.2 | NodelinLogicalMemoryInfo | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.2.2.1 | ScalarlinLgMemSize | read-only | mandatory | Memory size of the partition.(unit:Mbyte) |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.2.2 | ScalarlinLgMemSwapSize | read-only | mandatory | Swap size of the partition.(unit:Mbyte) |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4 | NodelinNetworkInfo | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1 | TablelinNetworkInterfaceTable | not-accessible | mandatory | Table with network interface information. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1 | RowlinNetworkInterfaceEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.1 | ColumnlinNIIndex | read-only | mandatory | Network inteface identification number. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.2 | ColumnlinNIMACAddress | read-only | mandatory | The interface address of the physical layer of the network. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.3 | ColumnlinNIIPAddress | read-only | mandatory | IP address of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.4 | ColumnlinNIInterfaceName | read-only | mandatory | Network interface name.(e.g.eth0). |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.5 | ColumnlinNISpeed | read-only | mandatory | Network speed.(unit:Mbit/s) |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.6 | ColumnlinNISubNetMask | read-only | mandatory | Subnet address of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.7 | ColumnlinNINetworkType | read-only | mandatory | Network interface type. The network type definition are assigned by the IANA. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.8 | ColumnlinNIBusType | read-only | mandatory | Bus type of the network interface. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.9 | ColumnlinNISegment | read-only | mandatory | Segment number of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.10 | ColumnlinNIBusNumber | read-only | mandatory | Bus number of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.11 | ColumnlinNIDeviceNumber | read-only | mandatory | Device number of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.12 | ColumnlinNIFunction | read-only | mandatory | Function number of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.13 | ColumnlinNIStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.14 | ColumnlinNIIpPacketsIn | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.15 | ColumnlinNIIpPacketsOut | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.16 | ColumnlinNILinkStatus | read-only | mandatory | The current link state of the interface. If 0; link status is unknown. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.17 | ColumnlinNIPhysicalID | read-only | mandatory | Identification name of Network Interface cand. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.18 | ColumnlinNIIPAddress2 | read-only | mandatory | IP address of the network interface. Please use this object instead of 'linNIIPAddress'. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.19 | ColumnlinNISubNetMask2 | read-only | mandatory | Subnet address of the network interface. Please use this object instead of 'linNISubNetMask'. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.2 | TablelinRoutingTable | not-accessible | mandatory | Table with routing information |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1 | RowlinRoutingEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.1 | ColumnlinRTIndex | read-only | mandatory | Routing identification number. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.2 | ColumnlinRTInterfaceName | read-only | mandatory | Network interface name.(e.g.eth0). |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.3 | ColumnlinRTDestination | read-only | mandatory | The destination IP address of this route. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.4 | ColumnlinRTNextHop | read-only | mandatory | The IP address of the next hop of this route. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.5 | ColumnlinRTRouteType | read-only | mandatory | The type of route. Refer to the following definition. Byte field Contents 0x0001 route unable 0x0002 destination is a gateway 0x0004 host entry (net otherwise)… |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.6 | ColumnlinRTRouteMask | read-only | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the linRTDestination field. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.7 | ColumnlinRTDestination2 | read-only | mandatory | The destination IP address of this route. Please use this object instead of 'linRTDestination'. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.8 | ColumnlinRTNextHop2 | read-only | mandatory | The IP address of the next hop of this route. Please use this object instead of 'linRTNextHop'. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.9 | ColumnlinRTRouteMask2 | read-only | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the linRTDestination2 field. Please use this object in… |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3 | TablelinIPv6NetworkInterfaceTable | not-accessible | mandatory | Table with IPv6 network interface information. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1 | RowlinIPv6NetworkInterfaceEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.1 | ColumnlinIPv6NIIndex | read-only | mandatory | IPv6 Network inteface identification number. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.2 | ColumnlinIPv6NIMACAddress | read-only | mandatory | The interface address of the physical layer of the IPv6 network. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.3 | ColumnlinIPv6NIIPAddress | read-only | mandatory | IPv6 address of the network interface. This object returns IPv6 address of 16 bytes binary data. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.4 | ColumnlinIPv6NIIPAddress2 | read-only | mandatory | IPv6 address of the network interface. This object returns IPv6 address of text string format |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.5 | ColumnlinIPv6NIInterfaceName | read-only | mandatory | IPv6 Network interface name.(e.g.eth0). |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.6 | ColumnlinIPv6NISpeed | read-only | mandatory | IPv6 Network speed.(unit:Mbit/s) |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.7 | ColumnlinIPv6NIPrefix | read-only | mandatory | IPv6 network interface prefix |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.8 | ColumnlinIPv6NIScope | read-only | mandatory | IPv6 network interface scope. Refer to the following definitions; value contents 0 global 16 loopback 32 link 64 site |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.9 | ColumnlinIPv6NIDADStatus | read-only | mandatory | IPv6 network interface DAD Status. Refer to the following definitions; value contents 0 The IP address is the preferred address. 4 The IP address is the optimi… |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.10 | ColumnlinIPv6NINetworkType | read-only | mandatory | IPv6 network interface type. The network type definition are assigned by the IANA. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.11 | ColumnlinIPv6NIBusType | read-only | mandatory | Bus type of the IPv6 network interface. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.12 | ColumnlinIPv6NISegment | read-only | mandatory | Segment number of the IPv6 network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.13 | ColumnlinIPv6NIBusNumber | read-only | mandatory | Bus number of the IPv6 network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.14 | ColumnlinIPv6NIDeviceNumber | read-only | mandatory | Device number of the IPv6 network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.15 | ColumnlinIPv6NIFunction | read-only | mandatory | Function number of the IPv6 network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.16 | ColumnlinIPv6NIStatus | read-only | mandatory | The current operational state of the IPv6 interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.17 | ColumnlinIPv6NIIpPacketsIn | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.18 | ColumnlinIPv6NIIpPacketsOut | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.19 | ColumnlinIPv6NILinkStatus | read-only | mandatory | The current link state of the IPv6 interface. If 0; link status is unknown. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.20 | ColumnlinIPv6NIPhysicalID | read-only | mandatory | Identification name of IPv6 network interface cand. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5 | NodelinHardwareResourceInfo | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1 | TablelinHardwareResourceTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1 | RowlinHardwareResourceEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.1 | ColumnlinHWRBusType | read-only | mandatory | Bus type of the device. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.2 | ColumnlinHWRSegment | read-only | mandatory | Segment number of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.3 | ColumnlinHWRBusNumber | read-only | mandatory | Bus number of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.4 | ColumnlinHWRDeviceNumber | read-only | mandatory | Device number of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.5 | ColumnlinHWRFunction | read-only | mandatory | Function number of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.6 | ColumnlinHWRMemArea | read-only | mandatory | Memory area used the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.7 | ColumnlinHWRIRQ | read-only | mandatory | Interrupt number used the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.8 | ColumnlinHWRIoPort | read-only | mandatory | I/O port area used the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.9 | ColumnlinHWRAdapterName | read-only | mandatory | Adapter name id of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.10 | ColumnlinHWRVendor | read-only | mandatory | Vendor id of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.11 | ColumnlinHWRClass | read-only | mandatory | Device classification; according to the PCI classification scheme. Byte Contents 0 BaseClass 1 SubClass 2 ProgIf |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.6 | NodelinOperatingSystemInfo | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.2.6.1 | ScalarlinOSName | read-only | mandatory | Operating system name that running on the partition. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.6.2 | ScalarlinOSVersion | read-only | mandatory | Operating system version that running on the partition. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.6.3 | ScalarlinOSRunTime | read-only | mandatory | Current partition up time.(unit:sec) |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.6.4 | ScalarlinOSSystemTime | read-only | mandatory | Current date and time as visible string. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.6.5 | ScalarlinOSLoginCurrentValue | read-only | mandatory | Number of current login users to the partition. |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.6.6 | ScalarlinOSAverageUsageRate | read-only | mandatory | The average system usage rate over all processors since startup.(unit:%) |
| 1.3.6.1.4.1.211.1.31.1.2.100.2.6.7 | ScalarlinOSRunlevel | read-only | mandatory | The current runlevel of the partition. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3 | NodelogicalComponentForWindows | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.4 | NodemonitoringFunction | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.5 | NodethresholdFunction | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.6 | NodestatusFunction | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.7 | NodeotherFunction | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.8 | NodepxFunction |