PSA-WIN-MIB
87 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.211 | Nodefujitsu | |||
| 1.3.6.1.4.1.211.1 | Nodeproducts | |||
| 1.3.6.1.4.1.211.1.31 | NodeiaServer | |||
| 1.3.6.1.4.1.211.1.31.1 | Nodeprimequest | |||
| 1.3.6.1.4.1.211.1.31.1.2 | Nodepartition | |||
| 1.3.6.1.4.1.211.1.31.1.2.100 | NodepartitionCommon | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.1 | NodephysicalComponent | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.2 | NodelogicalComponentForLinux | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.3 | NodelogicalComponentForWindows | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.3.1 | NodewinLogicalCpuInfo | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.3.1.6 | ScalarwinNumOfLogicalCpus | read-only | mandatory | Number of effective logical CPUs in the partition. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.2 | NodewinLogicalMemoryInfo | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.3.2.1 | ScalarwinLgMemSize | read-only | mandatory | Memory size of the partition.(unit:Mbyte) |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.2.2 | ScalarwinLgMemSwapSize | read-only | mandatory | Swap size of the partition.(unit:Mbyte) |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4 | NodewinNetworkInfo | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1 | TablewinNetworkInterfaceTable | not-accessible | mandatory | Table with network interface information. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1 | RowwinNetworkInterfaceEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.1 | ColumnwinNIIndex | read-only | mandatory | Network inteface identification number. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.2 | ColumnwinNIMACAddress | read-only | mandatory | The interface address of the physical layer of the network. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.3 | ColumnwinNIIPAddress | read-only | mandatory | IP address of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.4 | ColumnwinNIInterfaceName | read-only | mandatory | Network interface name.(e.g.eth0). |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.5 | ColumnwinNISpeed | read-only | mandatory | Network speed.(unit:Mbit/s) |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.6 | ColumnwinNISubNetMask | read-only | mandatory | Subnet address of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.7 | ColumnwinNINetworkType | read-only | mandatory | Network interface type. The network type definition are assigned by the IANA. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.8 | ColumnwinNIBusType | read-only | mandatory | Bus type of the network interface. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.9 | ColumnwinNISegment | read-only | mandatory | Segment number of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.10 | ColumnwinNIBusNumber | read-only | mandatory | Bus number of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.11 | ColumnwinNIDeviceNumber | read-only | mandatory | Device number of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.12 | ColumnwinNIFunction | read-only | mandatory | Function number of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.13 | ColumnwinNIStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.14 | ColumnwinNIIpPacketsIn | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.15 | ColumnwinNIIpPacketsOut | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.16 | ColumnwinNIDeviceName | read-only | mandatory | Device name of the network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.17 | ColumnwinNILinkStatus | read-only | mandatory | The current link state of the interface. If 0; link status is unknown. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.18 | ColumnwinNIPhysicalID | read-only | mandatory | Identification name of Network Interface cand. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.19 | ColumnwinNIIPAddress2 | read-only | mandatory | IP address of the network interface. Please use this object instead of 'winNIIPAddress'. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.1.1.20 | ColumnwinNISubNetMask2 | read-only | mandatory | Subnet address of the network interface. Please use this object instead of 'winNISubNetMask'. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2 | TablewinIPv6NetworkInterfaceTable | not-accessible | mandatory | Table with IPv6 network interface information. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1 | RowwinIPv6NetworkInterfaceEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.1 | ColumnwinIPv6NIIndex | read-only | mandatory | IPv6 Network inteface identification number. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.2 | ColumnwinIPv6NIMACAddress | read-only | mandatory | The interface address of the physical layer of the IPv6 network. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.3 | ColumnwinIPv6NIIPAddress | read-only | mandatory | IPv6 address of the network interface. This object returns IPv6 address of 16 bytes binary data. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.4 | ColumnwinIPv6NIIPAddress2 | read-only | mandatory | IPv6 address of the network interface. This object returns IPv6 address of text string format |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.5 | ColumnwinIPv6NIInterfaceName | read-only | mandatory | IPv6 Network interface name.(e.g.eth0). |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.6 | ColumnwinIPv6NISpeed | read-only | mandatory | IPv6 Network speed.(unit:Mbit/s) |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.7 | ColumnwinIPv6NIPrefix | read-only | mandatory | IPv6 network interface prefix |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.8 | ColumnwinIPv6NIScope | read-only | mandatory | IPv6 network interface scope. Refer to the following definitions; value contents 0 global 16 loopback 32 link 64 site |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.9 | ColumnwinIPv6NIDADStatus | read-only | mandatory | IPv6 network interface DAD Status. Refer to the following definitions; value contents 0 The DAD state is invalid 1 The DAD state is tentative 2 A duplicate IP … |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.10 | ColumnwinIPv6NINetworkType | read-only | mandatory | IPv6 network interface type. The network type definition are assigned by the IANA. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.11 | ColumnwinIPv6NIBusType | read-only | mandatory | Bus type of the IPv6 network interface. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.12 | ColumnwinIPv6NISegment | read-only | mandatory | Segment number of the IPv6 network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.13 | ColumnwinIPv6NIBusNumber | read-only | mandatory | Bus number of the IPv6 network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.14 | ColumnwinIPv6NIDeviceNumber | read-only | mandatory | Device number of the IPv6 network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.15 | ColumnwinIPv6NIFunction | read-only | mandatory | Function number of the IPv6 network interface. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.16 | ColumnwinIPv6NIStatus | read-only | mandatory | The current operational state of the IPv6 interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.17 | ColumnwinIPv6NIIpPacketsIn | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.18 | ColumnwinIPv6NIIpPacketsOut | read-only | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.19 | ColumnwinIPv6NIlinkStatus | read-only | mandatory | The current link state of the IPv6 interface. If 0; link status is unknown. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.4.2.1.20 | ColumnwinIPv6NIPhysicalID | read-only | mandatory | Identification name of IPv6 network interface cand. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5 | NodewinHardwareResourceInfo | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1 | TablewinHardwareResourceTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1 | RowwinHardwareResourceEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.1 | ColumnwinHWRBusType | read-only | mandatory | Bus type of the device. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.2 | ColumnwinHWRSegment | read-only | mandatory | Segment number of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.3 | ColumnwinHWRBusNumber | read-only | mandatory | Bus number of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.4 | ColumnwinHWRDeviceNumber | read-only | mandatory | Device number of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.5 | ColumnwinHWRFunction | read-only | mandatory | Function number of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.6 | ColumnwinHWRMemArea | read-only | mandatory | Memory area used the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.7 | ColumnwinHWRIRQ | read-only | mandatory | Interrupt number used the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.8 | ColumnwinHWRIoPort | read-only | mandatory | I/O port area used the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.9 | ColumnwinHWRAdapterName | read-only | mandatory | Adapter name id of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.10 | ColumnwinHWRVendor | read-only | mandatory | Vendor id of the device. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.5.1.1.11 | ColumnwinHWRClass | read-only | mandatory | Device classification; according to the PCI classification scheme. Byte Contents 0 BaseClass 1 SubClass 2 ProgIf |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.6 | NodewinOperatingSystemInfo | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.3.6.1 | ScalarwinOSName | read-only | mandatory | Operating system name that running on the partition. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.6.2 | ScalarwinOSVersion | read-only | mandatory | Operating system version that running on the partition. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.6.3 | ScalarwinOSRunTime | read-only | mandatory | Current partition up time.(unit:sec) |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.6.4 | ScalarwinOSSystemTime | read-only | mandatory | Current date and time as visible string. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.6.5 | ScalarwinOSCurrentSession | read-only | mandatory | Number of current session. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.6.6 | ScalarwinOSAverageUsageRate | read-only | mandatory | The average system usage rate over all processors since startup.(unit:%) |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.6.9 | ScalarwinOSServicePack | read-only | mandatory | Service pack. |
| 1.3.6.1.4.1.211.1.31.1.2.100.3.6.10 | ScalarwinOSCharactorCode | read-only | mandatory | System charactor code.This value is the Code-page indentifiers. |
| 1.3.6.1.4.1.211.1.31.1.2.100.4 | NodemonitoringFunction | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.5 | NodethresholdFunction | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.6 | NodestatusFunction | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.7 | NodeotherFunction | |||
| 1.3.6.1.4.1.211.1.31.1.2.100.8 | NodepxFunction |