MIB Viewer

PTPBASE-MIB

196 objects
The MIB module for PTP version 2 Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). Overview of PTP version 2 (IEEE Std. 1588-2008) [IEEE-1588-2008] defines a protocol enabling precise synchronization of clocks in measurement and control systems implemented with packet-based networks, the Precision Time Protocol version 2 (PTPv2). This MIB module does not address PTPv1, the earlier version defined in IEEE Std. 1588-2002. The protocol is applicable to network elements communicating using IP. The protocol enables heterogeneous systems that include clocks of various inherent precision, resolution, and stability to synchronize to a grandmaster clock. The protocol supports system-wide synchronization accuracy in the sub-microsecond range with minimal network and local clock computing resources. [IEEE-1588-2008] uses UDP/IP or Ethernet and can be adapted to other mappings. It includes formal mechanisms for message extensions, higher sampling rates, correction for asymmetry, a clock type to reduce error accumulation in large topologies, and specifications on how to incorporate the resulting additional data into the synchronization protocol. [IEEE-1588-2008] also defines conformance and management capability. MIB description This MIB module supports the Precision Time Protocol version 2 (PTPv2, hereafter designated as PTP) features of network element system devices, when using the default PTP profile described in [IEEE-1588-2008] when running over the IP network layer. It is envisioned that this MIB module will complement other managed objects to be defined to monitor and measure the performance of the PTP devices and telecom clocks supporting specific PTP profiles. Some other PTP profiles have their own MIB modules defined as part of the profile, and this MIB module is not intended to replace those MIB modules. Technical terms used in this module are defined in [IEEE-1588-2008]. The MIB module refers to sections of [IEEE-1588-2008]. Abbreviations: E2E End-to-End EUI Extended Unique Identifier GPS Global Positioning System IANA Internet Assigned Numbers Authority IP Internet Protocol NTP Network Time Protocol (see [RFC5905]) P2P Peer-to-Peer PTP Precision Time Protocol TAI International Atomic Time UDP User Datagram Protocol UTC Coordinated Universal Time References: [IEEE-1588-2008] IEEE Standard for A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, IEEE Std. 1588-2008, July 2008. The below table specifies the object formats of the various textual conventions used. Data type mapping Textual Convention SYNTAX 5.3.2 TimeInterval PtpClockTimeInterval OCTET STRING(SIZE(1..255)) 5.3.3 Timestamp PtpClockTimestamp OCTET STRING(SIZE(6)) 5.3.4 ClockIdentity PtpClockIdentity OCTET STRING(SIZE(8)) 5.3.5 PortIdentity PtpClockPortNumber INTEGER(1..65535) 5.3.7 ClockQuality PtpClockQualityClassType
Imported Objects
IF-MIBInterfaceIndexOrZero
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCAutonomousType DisplayString TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.2.1.241IdentityptpbaseMIBThe MIB module for PTP version 2 Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use i…
1.3.6.1.2.1.241.0NodeptpbaseMIBNotifs
1.3.6.1.2.1.241.1NodeptpbaseMIBObjects
1.3.6.1.2.1.241.1.1NodeptpbaseMIBSystemInfo
1.3.6.1.2.1.241.1.1.1TableptpbaseSystemTablenot-accessiblecurrentTable of count information about the PTP system for all domains.
1.3.6.1.2.1.241.1.1.1.1RowptpbaseSystemEntrynot-accessiblecurrentA table entry that contains count information about a single domain. New row entries are added when the PTP clock for this domain is configured, while the unco…
1.3.6.1.2.1.241.1.1.1.1.1ColumnptpDomainIndexnot-accessiblecurrentThis object specifies the domain number used to create a logical group of PTP devices. The Clock Domain is a logical group of clocks and devices that synchroni…
1.3.6.1.2.1.241.1.1.1.1.2ColumnptpInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this domain.
1.3.6.1.2.1.241.1.1.1.1.3ColumnptpDomainClockPortsTotalread-onlycurrentThis object specifies the total number of clock ports configured within a domain in the system.
1.3.6.1.2.1.241.1.1.2TableptpbaseSystemDomainTablenot-accessiblecurrent
1.3.6.1.2.1.241.1.1.2.1RowptpbaseSystemDomainEntrynot-accessiblecurrentA table entry that contains information about a single clock mode for the PTP system. A row entry gets added when PTP clocks are configured on the node.
1.3.6.1.2.1.241.1.1.2.1.1ColumnptpbaseSystemDomainClockTypeIndexnot-accessiblecurrentThis object specifies the clock type as defined in the textual convention description.
1.3.6.1.2.1.241.1.1.2.1.2ColumnptpbaseSystemDomainTotalsread-onlycurrentThis object specifies the total number of PTP domains for this particular clock type configured in this node.
1.3.6.1.2.1.241.1.1.3ScalarptpbaseSystemProfileread-onlycurrentThis object specifies the PTP profile implemented on the system.
1.3.6.1.2.1.241.1.2NodeptpbaseMIBClockInfo
1.3.6.1.2.1.241.1.2.1TableptpbaseClockCurrentDSTablenot-accessiblecurrentTable of information about the PTP clock currentDS for all domains.
1.3.6.1.2.1.241.1.2.1.1RowptpbaseClockCurrentDSEntrynot-accessiblecurrentA table entry that contains information about a single PTP clock currentDS for a domain.
1.3.6.1.2.1.241.1.2.1.1.1ColumnptpbaseClockCurrentDSDomainIndexnot-accessiblecurrentThis object specifies the domain number used to create a logical group of PTP devices.
1.3.6.1.2.1.241.1.2.1.1.2ColumnptpbaseClockCurrentDSClockTypeIndexnot-accessiblecurrentThis object specifies the clock type as defined in the textual convention description.
1.3.6.1.2.1.241.1.2.1.1.3ColumnptpbaseClockCurrentDSInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this clock type in the given domain.
1.3.6.1.2.1.241.1.2.1.1.4ColumnptpbaseClockCurrentDSStepsRemovedread-onlycurrentThe current clock dataset stepsRemoved value. This object specifies the distance measured by the number of boundary clocks between the local clock and the fore…
1.3.6.1.2.1.241.1.2.1.1.5ColumnptpbaseClockCurrentDSOffsetFromMasterread-onlycurrentThis object specifies the current clock dataset ClockOffset value. The value of the computation of the offset in time between a slave and a master clock.
1.3.6.1.2.1.241.1.2.1.1.6ColumnptpbaseClockCurrentDSMeanPathDelayread-onlycurrentThis object specifies the current clock dataset MeanPathDelay value. The mean path delay between a pair of ports as measured by the delay request-response mech…
1.3.6.1.2.1.241.1.2.2TableptpbaseClockParentDSTablenot-accessiblecurrentTable of information about the PTP clock parentDS for all domains.
1.3.6.1.2.1.241.1.2.2.1RowptpbaseClockParentDSEntrynot-accessiblecurrentA table entry that contains information about a single PTP clock parentDS for a domain.
1.3.6.1.2.1.241.1.2.2.1.1ColumnptpbaseClockParentDSDomainIndexnot-accessiblecurrentThis object specifies the domain number used to create a logical group of PTP devices.
1.3.6.1.2.1.241.1.2.2.1.2ColumnptpbaseClockParentDSClockTypeIndexnot-accessiblecurrentThis object specifies the clock type as defined in the textual convention description.
1.3.6.1.2.1.241.1.2.2.1.3ColumnptpbaseClockParentDSInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this clock type in the given domain.
1.3.6.1.2.1.241.1.2.2.1.4ColumnptpbaseClockParentDSParentPortIdentityread-onlycurrentThis object specifies the value of portIdentity of the port on the master that issues the Sync messages used in synchronizing this clock.
1.3.6.1.2.1.241.1.2.2.1.5ColumnptpbaseClockParentDSParentStatsread-onlycurrentThis object specifies the parentDS ParentStats value. This value indicates whether the values of ParentDSOffset and ParentDSClockPhChRate have been measured an…
1.3.6.1.2.1.241.1.2.2.1.6ColumnptpbaseClockParentDSOffsetread-onlycurrentThis object specifies the parentDS ParentOffsetScaledLogVariance value. This value is the variance of the parent clock's phase as measured by the local clock.
1.3.6.1.2.1.241.1.2.2.1.7ColumnptpbaseClockParentDSClockPhChRateread-onlycurrentThis object specifies the clock's parentDS ParentClockPhaseChangeRate value. This value is an estimate of the parent clock's phase change rate as measured by t…
1.3.6.1.2.1.241.1.2.2.1.8ColumnptpbaseClockParentDSGMClockIdentityread-onlycurrentThis object specifies the parentDS grandmaster clock identity.
1.3.6.1.2.1.241.1.2.2.1.9ColumnptpbaseClockParentDSGMClockPriority1read-onlycurrentThis object specifies the parentDS grandmaster clock priority1.
1.3.6.1.2.1.241.1.2.2.1.10ColumnptpbaseClockParentDSGMClockPriority2read-onlycurrentThis object specifies the parentDS grandmaster clock priority2.
1.3.6.1.2.1.241.1.2.2.1.11ColumnptpbaseClockParentDSGMClockQualityClassread-onlycurrentThis object specifies the parentDS grandmaster clock quality class.
1.3.6.1.2.1.241.1.2.2.1.12ColumnptpbaseClockParentDSGMClockQualityAccuracyread-onlycurrentThis object specifies the parentDS grandmaster clock quality accuracy.
1.3.6.1.2.1.241.1.2.2.1.13ColumnptpbaseClockParentDSGMClockQualityOffsetread-onlycurrentThis object specifies the parentDS grandmaster clock quality offset.
1.3.6.1.2.1.241.1.2.3TableptpbaseClockDefaultDSTablenot-accessiblecurrentTable of information about the PTP clock defaultDS for all domains.
1.3.6.1.2.1.241.1.2.3.1RowptpbaseClockDefaultDSEntrynot-accessiblecurrentA table entry that contains information about a single PTP clock defaultDS for a domain.
1.3.6.1.2.1.241.1.2.3.1.1ColumnptpbaseClockDefaultDSDomainIndexnot-accessiblecurrentThis object specifies the domain number used to create a logical group of PTP devices.
1.3.6.1.2.1.241.1.2.3.1.2ColumnptpbaseClockDefaultDSClockTypeIndexnot-accessiblecurrentThis object specifies the clock type as defined in the textual convention description.
1.3.6.1.2.1.241.1.2.3.1.3ColumnptpbaseClockDefaultDSInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this clock type in the given domain.
1.3.6.1.2.1.241.1.2.3.1.4ColumnptpbaseClockDefaultDSTwoStepFlagread-onlycurrentThis object specifies whether the two-step process is used.
1.3.6.1.2.1.241.1.2.3.1.5ColumnptpbaseClockDefaultDSClockIdentityread-onlycurrentThis object specifies the defaultDS clockIdentity member.
1.3.6.1.2.1.241.1.2.3.1.6ColumnptpbaseClockDefaultDSPriority1read-onlycurrentThis object specifies the defaultDS priority1 member.
1.3.6.1.2.1.241.1.2.3.1.7ColumnptpbaseClockDefaultDSPriority2read-onlycurrentThis object specifies the defaultDS priority2 member.
1.3.6.1.2.1.241.1.2.3.1.8ColumnptpbaseClockDefaultDSSlaveOnlyread-onlycurrentThis object specifies whether the SlaveOnly flag is set.
1.3.6.1.2.1.241.1.2.3.1.9ColumnptpbaseClockDefaultDSQualityClassread-onlycurrentThis object specifies the defaultDS Quality Class.
1.3.6.1.2.1.241.1.2.3.1.10ColumnptpbaseClockDefaultDSQualityAccuracyread-onlycurrentThis object specifies the defaultDS Quality Accuracy.
1.3.6.1.2.1.241.1.2.3.1.11ColumnptpbaseClockDefaultDSQualityOffsetread-onlycurrentThis object specifies the defaultDS Quality offset.
1.3.6.1.2.1.241.1.2.4TableptpbaseClockRunningTablenot-accessiblecurrentTable of information about the PTP clock running datasets for all domains.
1.3.6.1.2.1.241.1.2.4.1RowptpbaseClockRunningEntrynot-accessiblecurrentA table entry that contains information about a single PTP clock running dataset for a domain.
1.3.6.1.2.1.241.1.2.4.1.1ColumnptpbaseClockRunningDomainIndexnot-accessiblecurrentThis object specifies the domain number used to create a logical group of PTP devices.
1.3.6.1.2.1.241.1.2.4.1.2ColumnptpbaseClockRunningClockTypeIndexnot-accessiblecurrentThis object specifies the clock type as defined in the textual convention description.
1.3.6.1.2.1.241.1.2.4.1.3ColumnptpbaseClockRunningInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this clock type in the given domain.
1.3.6.1.2.1.241.1.2.4.1.4ColumnptpbaseClockRunningStateread-onlycurrentThis object specifies the clock state returned by a PTP engine.
1.3.6.1.2.1.241.1.2.4.1.5ColumnptpbaseClockRunningPacketsSentread-onlycurrentThis object specifies the total number of all unicast and multicast packets that have been sent out for this clock in this domain for this type. These counters…
1.3.6.1.2.1.241.1.2.4.1.6ColumnptpbaseClockRunningPacketsReceivedread-onlycurrentThis object specifies the total number of all unicast and multicast packets that have been received for this clock in this domain for this type. These counters…
1.3.6.1.2.1.241.1.2.5TableptpbaseClockTimePropertiesDSTablenot-accessiblecurrentTable of information about the PTP clock timePropertiesDS for all domains.
1.3.6.1.2.1.241.1.2.5.1RowptpbaseClockTimePropertiesDSEntrynot-accessiblecurrentA table entry that contains information about a single PTP clock timePropertiesDS for a domain.
1.3.6.1.2.1.241.1.2.5.1.1ColumnptpbaseClockTimePropertiesDSDomainIndexnot-accessiblecurrentThis object specifies the domain number used to create a logical group of PTP devices.
1.3.6.1.2.1.241.1.2.5.1.2ColumnptpbaseClockTimePropertiesDSClockTypeIndexnot-accessiblecurrentThis object specifies the clock type as defined in the textual convention description.
1.3.6.1.2.1.241.1.2.5.1.3ColumnptpbaseClockTimePropertiesDSInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this clock type in the given domain.
1.3.6.1.2.1.241.1.2.5.1.4ColumnptpbaseClockTimePropertiesDSCurrentUTCOffsetValidread-onlycurrentThis object specifies the timePropertiesDS value of whether the current UTC offset is valid.
1.3.6.1.2.1.241.1.2.5.1.5ColumnptpbaseClockTimePropertiesDSCurrentUTCOffsetread-onlycurrentThis object specifies the timePropertiesDS value of the current UTC offset. In PTP systems whose epoch is the PTP epoch, the value of timePropertiesDS.currentU…
1.3.6.1.2.1.241.1.2.5.1.6ColumnptpbaseClockTimePropertiesDSLeap59read-onlycurrentThis object specifies the Leap59 value in the clock currentDS.
1.3.6.1.2.1.241.1.2.5.1.7ColumnptpbaseClockTimePropertiesDSLeap61read-onlycurrentThis object specifies the Leap61 value in the clock currentDS.
1.3.6.1.2.1.241.1.2.5.1.8ColumnptpbaseClockTimePropertiesDSTimeTraceableread-onlycurrentThis object specifies the Time Traceable value in the clock currentDS.
1.3.6.1.2.1.241.1.2.5.1.9ColumnptpbaseClockTimePropertiesDSFreqTraceableread-onlycurrentThis object specifies the Frequency Traceable value in the clock currentDS.
1.3.6.1.2.1.241.1.2.5.1.10ColumnptpbaseClockTimePropertiesDSPTPTimescaleread-onlycurrentThis object specifies the PTP Timescale value in the clock currentDS.
1.3.6.1.2.1.241.1.2.5.1.11ColumnptpbaseClockTimePropertiesDSSourceread-onlycurrentThis object specifies the Timesource value in the clock currentDS.
1.3.6.1.2.1.241.1.2.6TableptpbaseClockTransDefaultDSTablenot-accessiblecurrentTable of information about the PTP transparentClockDefaultDS for all domains.
1.3.6.1.2.1.241.1.2.6.1RowptpbaseClockTransDefaultDSEntrynot-accessiblecurrentA table entry that contains information about a single PTP transparent clock defaultDS for a domain.
1.3.6.1.2.1.241.1.2.6.1.1ColumnptpbaseClockTransDefaultDSDomainIndexnot-accessiblecurrentThis object specifies the domain number used to create a logical group of PTP devices.
1.3.6.1.2.1.241.1.2.6.1.2ColumnptpbaseClockTransDefaultDSInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this clock type in the given domain.
1.3.6.1.2.1.241.1.2.6.1.3ColumnptpbaseClockTransDefaultDSClockIdentityread-onlycurrentThis object specifies the value of the clockIdentity attribute of the local clock.
1.3.6.1.2.1.241.1.2.6.1.4ColumnptpbaseClockTransDefaultDSNumOfPortsread-onlycurrentThis object specifies the number of PTP ports of the device. These counters are discontinuous.
1.3.6.1.2.1.241.1.2.6.1.5ColumnptpbaseClockTransDefaultDSDelayread-onlycurrentThis object, if the transparent clock is an end-to-end transparent clock, has the value of e2e; if the transparent clock is a peer-to-peer transparent clock, t…
1.3.6.1.2.1.241.1.2.6.1.6ColumnptpbaseClockTransDefaultDSPrimaryDomainread-onlycurrentThis object specifies the value of the primary syntonization domain. The initialization value is 0.
1.3.6.1.2.1.241.1.2.7TableptpbaseClockPortTablenot-accessiblecurrentTable of information about the clock ports for a particular domain.
1.3.6.1.2.1.241.1.2.7.1RowptpbaseClockPortEntrynot-accessiblecurrentA table entry that contains information about a single clock port.
1.3.6.1.2.1.241.1.2.7.1.1ColumnptpbaseClockPortDomainIndexnot-accessiblecurrentThis object specifies the domain number used to create a logical group of PTP devices.
1.3.6.1.2.1.241.1.2.7.1.2ColumnptpbaseClockPortClockTypeIndexnot-accessiblecurrentThis object specifies the clock type as defined in the textual convention description.
1.3.6.1.2.1.241.1.2.7.1.3ColumnptpbaseClockPortClockInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this clock type in the given domain.
1.3.6.1.2.1.241.1.2.7.1.4ColumnptpbaseClockPortTablePortNumberIndexnot-accessiblecurrentThis object specifies the PTP portNumber for this port.
1.3.6.1.2.1.241.1.2.7.1.5ColumnptpbaseClockPortNameread-onlycurrentThis object specifies the PTP clock port name configured on the node.
1.3.6.1.2.1.241.1.2.7.1.6ColumnptpbaseClockPortRoleread-onlycurrentThis object describes the current role (slave/master) of the port.
1.3.6.1.2.1.241.1.2.7.1.7ColumnptpbaseClockPortSyncTwoStepread-onlycurrentThis object specifies that two-step clock operation between the PTP master and slave device is enabled.
1.3.6.1.2.1.241.1.2.7.1.8ColumnptpbaseClockPortCurrentPeerAddressTyperead-onlycurrentThis object specifies the current peer's network address type used for PTP communication.
1.3.6.1.2.1.241.1.2.7.1.9ColumnptpbaseClockPortCurrentPeerAddressread-onlycurrentThis object specifies the current peer's network address used for PTP communication.
1.3.6.1.2.1.241.1.2.7.1.10ColumnptpbaseClockPortNumOfAssociatedPortsread-onlycurrentThis object specifies the following: For a master port - the number of PTP slave sessions (peers) associated with this PTP port. For a slave port - the number …
1.3.6.1.2.1.241.1.2.8TableptpbaseClockPortDSTablenot-accessiblecurrentTable of information about the clock's portDS for a particular domain.
1.3.6.1.2.1.241.1.2.8.1RowptpbaseClockPortDSEntrynot-accessiblecurrentA table entry that contains portDS information for a single clock port.
1.3.6.1.2.1.241.1.2.8.1.1ColumnptpbaseClockPortDSDomainIndexnot-accessiblecurrentThis object specifies the domain number used to create a logical group of PTP devices.
1.3.6.1.2.1.241.1.2.8.1.2ColumnptpbaseClockPortDSClockTypeIndexnot-accessiblecurrentThis object specifies the clock type as defined in the textual convention description.
1.3.6.1.2.1.241.1.2.8.1.3ColumnptpbaseClockPortDSClockInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this clock type in the given domain.
1.3.6.1.2.1.241.1.2.8.1.4ColumnptpbaseClockPortDSPortNumberIndexnot-accessiblecurrentThis object specifies the PTP portNumber associated with this PTP port.
1.3.6.1.2.1.241.1.2.8.1.5ColumnptpbaseClockPortDSNameread-onlycurrentThis object specifies the PTP clock portDS name.
1.3.6.1.2.1.241.1.2.8.1.6ColumnptpbaseClockPortDSPortIdentityread-onlycurrentThis object specifies the PTP clock port Identity.
1.3.6.1.2.1.241.1.2.8.1.7ColumnptpbaseClockPortDSlogAnnouncementIntervalread-onlycurrentThis object specifies the Announce message transmission interval associated with this clock port.
1.3.6.1.2.1.241.1.2.8.1.8ColumnptpbaseClockPortDSAnnounceRctTimeoutread-onlycurrentThis object specifies the Announce receipt timeout associated with this clock port.
1.3.6.1.2.1.241.1.2.8.1.9ColumnptpbaseClockPortDSlogSyncIntervalread-onlycurrentThis object specifies the Sync message transmission interval.
1.3.6.1.2.1.241.1.2.8.1.10ColumnptpbaseClockPortDSMinDelayReqIntervalread-onlycurrentThis object specifies the Delay_Req message transmission interval.
1.3.6.1.2.1.241.1.2.8.1.11ColumnptpbaseClockPortDSPeerDelayReqIntervalread-onlycurrentThis object specifies the Pdelay_Req message transmission interval.
1.3.6.1.2.1.241.1.2.8.1.12ColumnptpbaseClockPortDSDelayMechread-onlycurrentThis object specifies the delay mechanism used. If the clock is an end-to-end clock, the value is e2e; if the clock is a peer to-peer clock, the value is p2p.
1.3.6.1.2.1.241.1.2.8.1.13ColumnptpbaseClockPortDSPeerMeanPathDelayread-onlycurrentThis object specifies the peer meanPathDelay.
1.3.6.1.2.1.241.1.2.8.1.14ColumnptpbaseClockPortDSGrantDurationread-onlycurrentThis object specifies the grant duration allocated by the master.
1.3.6.1.2.1.241.1.2.8.1.15ColumnptpbaseClockPortDSPTPVersionread-onlycurrentThis object specifies the PTP version being used.
1.3.6.1.2.1.241.1.2.9TableptpbaseClockPortRunningTablenot-accessiblecurrentTable of information about the clock ports running datasets for a particular domain.
1.3.6.1.2.1.241.1.2.9.1RowptpbaseClockPortRunningEntrynot-accessiblecurrentA table entry that contains running dataset information about a single clock port.
1.3.6.1.2.1.241.1.2.9.1.1ColumnptpbaseClockPortRunningDomainIndexnot-accessiblecurrentThis object specifies the domain number used to create a logical group of PTP devices.
1.3.6.1.2.1.241.1.2.9.1.2ColumnptpbaseClockPortRunningClockTypeIndexnot-accessiblecurrentThis object specifies the clock type as defined in the textual convention description.
1.3.6.1.2.1.241.1.2.9.1.3ColumnptpbaseClockPortRunningClockInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this clock type in the given domain.
1.3.6.1.2.1.241.1.2.9.1.4ColumnptpbaseClockPortRunningPortNumberIndexnot-accessiblecurrentThis object specifies the PTP portNumber associated with this clock port.
1.3.6.1.2.1.241.1.2.9.1.5ColumnptpbaseClockPortRunningNameread-onlycurrentThis object specifies the PTP clock port name.
1.3.6.1.2.1.241.1.2.9.1.6ColumnptpbaseClockPortRunningStateread-onlycurrentThis object specifies the port state returned by PTP engine: initializing faulty disabled listening preMaster master passive uncalibrated slave
1.3.6.1.2.1.241.1.2.9.1.7ColumnptpbaseClockPortRunningRoleread-onlycurrentThis object specifies the Clock Role.
1.3.6.1.2.1.241.1.2.9.1.8ColumnptpbaseClockPortRunningInterfaceIndexread-onlycurrentThis object specifies the interface on the node being used by the PTP clock for PTP communication.
1.3.6.1.2.1.241.1.2.9.1.9ColumnptpbaseClockPortRunningTransportread-onlycurrentThis object specifies the transport protocol being used for PTP communication (the mapping used).
1.3.6.1.2.1.241.1.2.9.1.10ColumnptpbaseClockPortRunningEncapsulationTyperead-onlycurrentThis object specifies the type of encapsulation if the interface is adding extra layers (e.g., VLAN or Pseudowire encapsulation) for the PTP messages.
1.3.6.1.2.1.241.1.2.9.1.11ColumnptpbaseClockPortRunningTxModeread-onlycurrentThis object specifies the clock transmission mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-m…
1.3.6.1.2.1.241.1.2.9.1.12ColumnptpbaseClockPortRunningRxModeread-onlycurrentThis object specifies the clock receive mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-mix: U…
1.3.6.1.2.1.241.1.2.9.1.13ColumnptpbaseClockPortRunningPacketsReceivedread-onlycurrentThis object specifies the packets received on the clock port (cumulative). These counters are discontinuous.
1.3.6.1.2.1.241.1.2.9.1.14ColumnptpbaseClockPortRunningPacketsSentread-onlycurrentThis object specifies the packets sent on the clock port (cumulative). These counters are discontinuous.
1.3.6.1.2.1.241.1.2.10TableptpbaseClockPortTransDSTablenot-accessiblecurrentTable of information about the transparentClockPortDS for a particular domain.
1.3.6.1.2.1.241.1.2.10.1RowptpbaseClockPortTransDSEntrynot-accessiblecurrentA table entry that contains clock port transparent dataset information about a single clock port.
1.3.6.1.2.1.241.1.2.10.1.1ColumnptpbaseClockPortTransDSDomainIndexnot-accessiblecurrentThis object specifies the domain number used to create a logical group of PTP devices.
1.3.6.1.2.1.241.1.2.10.1.2ColumnptpbaseClockPortTransDSInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this clock type in the given domain.
1.3.6.1.2.1.241.1.2.10.1.3ColumnptpbaseClockPortTransDSPortNumberIndexnot-accessiblecurrentThis object specifies the PTP portNumber associated with this port.
1.3.6.1.2.1.241.1.2.10.1.4ColumnptpbaseClockPortTransDSPortIdentityread-onlycurrentThis object specifies the value of the PortIdentity attribute of the local port.
1.3.6.1.2.1.241.1.2.10.1.5ColumnptpbaseClockPortTransDSlogMinPdelayReqIntread-onlycurrentThis object specifies the value of the logarithm to the base 2 of the minPdelayReqInterval.
1.3.6.1.2.1.241.1.2.10.1.6ColumnptpbaseClockPortTransDSFaultyFlagread-onlycurrentThis object specifies the value TRUE if the port is faulty and FALSE if the port is operating normally.
1.3.6.1.2.1.241.1.2.10.1.7ColumnptpbaseClockPortTransDSPeerMeanPathDelayread-onlycurrentThis object specifies, if the delayMechanism used is p2p, the value of the estimate of the current one-way propagation delay, i.e., <meanPathDelay> on the link…
1.3.6.1.2.1.241.1.2.11TableptpbaseClockPortAssociateTablenot-accessiblecurrentTable of information about a given port's associated ports. For a master port: multiple slave ports that have established sessions with the current master port…
1.3.6.1.2.1.241.1.2.11.1RowptpbaseClockPortAssociateEntrynot-accessiblecurrentA table entry that contains information about a single associated port for the given clock port.
1.3.6.1.2.1.241.1.2.11.1.1ColumnptpClockPortCurrentDomainIndexnot-accessiblecurrentThis object specifies the given port's domain number.
1.3.6.1.2.1.241.1.2.11.1.2ColumnptpClockPortCurrentClockTypeIndexnot-accessiblecurrentThis object specifies the given port's clock type.
1.3.6.1.2.1.241.1.2.11.1.3ColumnptpClockPortCurrentClockInstanceIndexnot-accessiblecurrentThis object specifies the instance of the clock for this clock type in the given domain.
1.3.6.1.2.1.241.1.2.11.1.4ColumnptpClockPortCurrentPortNumberIndexnot-accessiblecurrentThis object specifies the PTP portNumber for the given port.
1.3.6.1.2.1.241.1.2.11.1.5ColumnptpbaseClockPortAssociatePortIndexnot-accessiblecurrentThis object specifies the associated port's serial number in the current port's context.
1.3.6.1.2.1.241.1.2.11.1.6ColumnptpbaseClockPortAssociateAddressTyperead-onlycurrentThis object specifies the peer port's network address type used for PTP communication. The OCTET STRING representation of the OID of ptpbaseWellKnownTransportT…
1.3.6.1.2.1.241.1.2.11.1.7ColumnptpbaseClockPortAssociateAddressread-onlycurrentThis object specifies the peer port's network address used for PTP communication.
1.3.6.1.2.1.241.1.2.11.1.8ColumnptpbaseClockPortAssociatePacketsSentread-onlycurrentThe number of packets sent to this peer port from the current port. These counters are discontinuous.
1.3.6.1.2.1.241.1.2.11.1.9ColumnptpbaseClockPortAssociatePacketsReceivedread-onlycurrentThe number of packets received from this peer port by the current port. These counters are discontinuous.
1.3.6.1.2.1.241.1.2.11.1.10ColumnptpbaseClockPortAssociateInErrorsread-onlycurrentThis object specifies the input errors associated with the peer port. These counters are discontinuous.
1.3.6.1.2.1.241.1.2.11.1.11ColumnptpbaseClockPortAssociateOutErrorsread-onlycurrentThis object specifies the output errors associated with the peer port. These counters are discontinuous.
1.3.6.1.2.1.241.1.2.12NodeptpbaseWellKnownTransportTypes
1.3.6.1.2.1.241.1.2.12.1IdentityptpbaseTransportTypeIPversion4currentIP version 4
1.3.6.1.2.1.241.1.2.12.2IdentityptpbaseTransportTypeIPversion6currentIP version 6
1.3.6.1.2.1.241.1.2.12.3IdentityptpbaseTransportTypeEthernetcurrentEthernet
1.3.6.1.2.1.241.1.2.12.4IdentityptpbaseTransportTypeDeviceNETcurrentDevice NET
1.3.6.1.2.1.241.1.2.12.5IdentityptpbaseTransportTypeControlNETcurrentControl NET
1.3.6.1.2.1.241.1.2.12.6IdentityptpbaseTransportTypeIEC61158currentIEC61158
1.3.6.1.2.1.241.1.2.13NodeptpbaseWellKnownEncapsulationTypes
1.3.6.1.2.1.241.1.2.13.1IdentityptpbaseEncapsulationTypeEthernetcurrentEthernet Encapsulation type.
1.3.6.1.2.1.241.1.2.13.2IdentityptpbaseEncapsulationTypeVLANcurrentVLAN Encapsulation type.
1.3.6.1.2.1.241.1.2.13.3IdentityptpbaseEncapsulationTypeUDPIPLSPcurrentUDP/IP over MPLS Encapsulation type.
1.3.6.1.2.1.241.1.2.13.4IdentityptpbaseEncapsulationTypePWUDPIPLSPcurrentUDP/IP Pseudowire over MPLS Encapsulation type.
1.3.6.1.2.1.241.1.2.13.5IdentityptpbaseEncapsulationTypePWEthernetLSPcurrentEthernet Pseudowire over MPLS Encapsulation type.
1.3.6.1.2.1.241.2NodeptpbaseMIBConformance
1.3.6.1.2.1.241.2.1NodeptpbaseMIBCompliances
1.3.6.1.2.1.241.2.1.1ComplianceptpbaseMIBCompliancesSystemInfocurrentCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide system-level information of clock devices. Such devices can only be m…
1.3.6.1.2.1.241.2.1.2ComplianceptpbaseMIBCompliancesClockInfocurrentCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-related information. Such devices can only be monitored using t…
1.3.6.1.2.1.241.2.1.3ComplianceptpbaseMIBCompliancesClockPortInfocurrentCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-port-related information. Such devices can only be monitored us…
1.3.6.1.2.1.241.2.1.4ComplianceptpbaseMIBCompliancesTransparentClockInfocurrentCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide transparent-clock-related information. Such devices can only be monit…
1.3.6.1.2.1.241.2.2NodeptpbaseMIBGroups
1.3.6.1.2.1.241.2.2.1GroupptpbaseMIBSystemInfoGroupcurrentGroup that aggregates objects describing system-wide information
1.3.6.1.2.1.241.2.2.2GroupptpbaseMIBClockCurrentDSGroupcurrentGroup that aggregates objects describing PTP currentDS information
1.3.6.1.2.1.241.2.2.3GroupptpbaseMIBClockParentDSGroupcurrentGroup that aggregates objects describing PTP parentDS information
1.3.6.1.2.1.241.2.2.4GroupptpbaseMIBClockDefaultDSGroupcurrentGroup that aggregates objects describing PTP defaultDS information
1.3.6.1.2.1.241.2.2.5GroupptpbaseMIBClockRunningGroupcurrentGroup that aggregates objects describing PTP running state information
1.3.6.1.2.1.241.2.2.6GroupptpbaseMIBClockTimepropertiesGroupcurrentGroup that aggregates objects describing PTP Time Properties information
1.3.6.1.2.1.241.2.2.7GroupptpbaseMIBClockTranparentDSGroupcurrentGroup that aggregates objects describing PTP transparentClockDefaultDS information
1.3.6.1.2.1.241.2.2.8GroupptpbaseMIBClockPortGroupcurrentGroup that aggregates objects describing information for a given PTP Port
1.3.6.1.2.1.241.2.2.9GroupptpbaseMIBClockPortDSGroupcurrentGroup that aggregates objects describing PTP portDS information
1.3.6.1.2.1.241.2.2.10GroupptpbaseMIBClockPortRunningGroupcurrentGroup that aggregates objects describing PTP running interface information
1.3.6.1.2.1.241.2.2.11GroupptpbaseMIBClockPortTransDSGroupcurrentGroup that aggregates objects describing PTP transparentClockPortDS information
1.3.6.1.2.1.241.2.2.12GroupptpbaseMIBClockPortAssociateGroupcurrentGroup that aggregates objects describing information on peer PTP ports for a given PTP clock port
Type Definitions
NameSyntaxStatusDescription
PtpClockDomainTypeUnsigned32 (0..255)currentThe Domain is identified by an integer, the domainNumber, in the range of 0 to 255. An integer value that is used to assign each PTP device to a particular domain.
PtpClockIdentityOCTET STRING (SIZE (8))currentThe clock identity is an 8-octet array and will be presented in the form of a character array. Network byte order is assumed. The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual assigned nu…
PtpClockInstanceTypeUnsigned32 (0..255)currentThe instance of the clock of a given clock type in a given domain.
PtpClockIntervalBase2Integer32 (-128..127)currentThe interval included in message types Announce, Sync, Delay_Req, and Pdelay_Req as indicated in Section 7.7.2.1 of [IEEE-1588-2008].
PtpClockMechanismTypeINTEGER { e2e(1), p2p(2), disabled(254) }currentThe clock type based on whether end-to-end or peer-to-peer mechanisms are used. The mechanism used to calculate the Mean Path Delay as indicated in Table 9 of [IEEE-1588-2008].
PtpClockPortNumberUnsigned32 (0..65535)currentAn index identifying a specific PTP port on a PTP node.
PtpClockPortStateINTEGER { initializing(1), faulty(2), disabled(3), listening(4), preMaster(5), master(6), passive(7), uncalibrated(8), slave(9) }currentThis is the value of the current state of the protocol engine associated with this port.
PtpClockPortTransportTypeAddressOCTET STRING (SIZE (1..255))currentThe clock port transport protocol address used for this communication between the clock nodes. This is a string corresponding to the address type as specified by the transport type used. The transport types can be defin…
PtpClockProfileTypeINTEGER { default(1), telecom(2), vendorspecific(3) }currentClock Profile used. A profile is the set of allowed PTP features applicable to a device.
PtpClockQualityAccuracyTypeINTEGER { nanoSecond25(32), nanoSecond100(33), nanoSecond250(34), microSec1(35), microSec2dot5(36), microSec10(37), microSec25(38), microSec100(39), microSec250(40), milliSec1(41), milliSec2dot5(42), milliSec10(43), milliSec25(44), milliSec100(45), milliSec250(46), second1(47), second10(48), secondGreater10(49), unknown(254) }currentThe ClockQuality as specified in Section 5.3.7, Section 7.6.2.5, and Table 6 of [IEEE-1588-2008]. The following values are not represented in the enumerated values. 0x01-0x1F Reserved 0x32-0x7F Reserved It is important …
PtpClockQualityClassTypeINTEGER { clockclass6(6), clockclass7(7), clockclass13(13), clockclass14(14), clockclass52(52), clockclass58(58) }currentThe ClockQuality as specified in Section 5.3.7, Section 7.6.2.4, and Table 5 of [IEEE-1588-2008].
PtpClockRoleTypeINTEGER { master(1), slave(2) }currentThe Clock Role. The protocol generates a master-slave relationship among the clocks in the system. Clock Role Value Master clock 1 Slave clock 2
PtpClockStateTypeINTEGER { freerun(1), holdover(2), acquiring(3), frequencyLocked(4), phaseAligned(5) }currentThe clock state returned by a PTP engine. Clock State Value Freerun state 1 Holdover state 2 Acquiring state 3 Freq_locked state 4 Phase_aligned state 5
PtpClockTimeIntervalOCTET STRING (SIZE (1..255))currentThis textual convention corresponds to the TimeInterval structure indicated in Section 5.3.2 of [IEEE-1588-2008]. It will be presented in the form of a character array. Network byte order is assumed.
PtpClockTimeSourceTypeINTEGER { atomicClock(16), gps(32), terrestrialRadio(48), ptp(64), ntp(80), handSet(96), other(144), internalOscillator(160) }currentThe ClockQuality as specified in Sections 5.3.7, Section 7.6.2.6, and Table 7 of [IEEE-1588-2008]. The following values are not represented in the enumerated values. 0xF0-0xFE For use by alternate PTP profiles 0xFF Rese…
PtpClockTxModeTypeINTEGER { unicast(1), multicast(2), multicastmix(3) }currentTransmission mode. Unicast: Using unicast communication channel. Multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channel
PtpClockTypeINTEGER { ordinaryClock(1), boundaryClock(2), transparentClock(3), boundaryNode(4) }currentThe clock types as defined in the MIB module description.