PW-ATM-MIB-DRAFT-00
43 objects
This MIB contains managed object definitions for Pseudo Wire emulation of ATM over Packet Switched Networks(PSN). This MIB reports to the PW-MIB. The PW-MIB contains structures and MIB associations generic to Pseudo-Wire Virtual Circuit (VC) emulation. VC-specific MIBs (such as this) contain config and stats for specific VC types.
Imported Objects
| ATM-TC-MIB | AtmVcIdentifier AtmVpIdentifier |
| IF-MIB | InterfaceIndex |
| PW-MIB | pwVcIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 experimental Integer32 Counter32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowPointer RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.979 | IdentitypwAtmMIB | This MIB contains managed object definitions for Pseudo Wire emulation of ATM over Packet Switched Networks(PSN). This MIB reports to the PW-MIB. The PW-MIB co… | ||
| 1.3.6.1.3.979.0 | NodepwAtmNotifications | |||
| 1.3.6.1.3.979.1 | NodepwAtmObjects | |||
| 1.3.6.1.3.979.1.1 | TablepwAtmOutboundTable | not-accessible | current | This table specifies the information for an ATM VC to be carried over PSN in the outbound direction. |
| 1.3.6.1.3.979.1.1.1 | RowpwAtmOutboundEntry | not-accessible | current | A row in this table represents an ATM VC that needs to be adapted and carried over PSN. This table is indexed by pwVcIndex from pwVcTable. |
| 1.3.6.1.3.979.1.1.1.1 | ColumnpwAtmOutboundAtmIf | read-create | current | The ATM Interface that receives cells from the ATM network. |
| 1.3.6.1.3.979.1.1.1.2 | ColumnpwAtmOutboundVpi | read-create | current | VPI value of this ATM VC. If the pwVcType is atmNto1Transparent then the value will be set to zero. |
| 1.3.6.1.3.979.1.1.1.3 | ColumnpwAtmOutboundVci | read-create | current | VCI value of this ATM VC. If the pwVcType is atmNto1Transparent, atmCell1to1Vpc or atmCellNto1Vpc then the value should be set to zero. |
| 1.3.6.1.3.979.1.1.1.4 | ColumnpwAtmOutboundTrafficParamDescr | read-create | current | This object represents a pointer to a ATM traffic parameter specification table which will be employed while receiving cells from the ATM network. This table s… |
| 1.3.6.1.3.979.1.1.1.5 | ColumnpwAtmOutboundRowStatus | read-create | current | This Object is used to create, modify or delete a row in this table. |
| 1.3.6.1.3.979.1.1.1.6 | ColumnpwAtmOutboundClpQosMapping | read-create | current | This Object indicates whether the CLP bits are considered when determining the value placed in the Quality of Service fields (e.g. EXP fields of the MPLS Label… |
| 1.3.6.1.3.979.1.1.1.7 | ColumnpwAtmOutboundOamCellSupported | read-create | current | This Object indicates whether OAM Cells are transported on this VC. |
| 1.3.6.1.3.979.1.1.1.8 | ColumnpwAtmOutboundQosScalingFactor | read-create | current | This Object represents the scaling factor (% value) to be applied to ATM QoS rates when calculating QoS rates for the PSN domain . For example, in the cell tra… |
| 1.3.6.1.3.979.1.2 | TablepwAtmOutboundPerfTable | not-accessible | current | This table specifies performance-related attributes for an ATM VC in the outbound direction. |
| 1.3.6.1.3.979.1.2.1 | RowpwAtmOutboundPerfEntry | not-accessible | current | A row in this table represents performance for an ATM VC in the outbound direction |
| 1.3.6.1.3.979.1.2.1.1 | ColumnpwAtmOutboundCellsReceived | read-only | current | This Object indicates the number of cells received by this VC. |
| 1.3.6.1.3.979.1.2.1.2 | ColumnpwAtmOutboundCellsRejected | read-only | current | This Object indicates the number of cells that were rejected by this VC because of policing. |
| 1.3.6.1.3.979.1.2.1.3 | ColumnpwAtmOutboundCellsTagged | read-only | current | This Object indicates the number of cells that were Tagged. |
| 1.3.6.1.3.979.1.2.1.4 | ColumnpwAtmOutboundHCCellsReceived | read-only | current | High capacity counter for number of cells received by this VC. |
| 1.3.6.1.3.979.1.2.1.5 | ColumnpwAtmOutboundHCCellsRejected | read-only | current | High Capacity counter for number of cells that were rejected by this VC because of policing. |
| 1.3.6.1.3.979.1.2.1.6 | ColumnpwAtmOutboundHCCellsTagged | read-only | current | High capacity counter for number of cells that were Tagged. |
| 1.3.6.1.3.979.1.3 | TablepwAtmInboundTable | not-accessible | current | This table specifies the information for an ATM VC in the Inbound direction. |
| 1.3.6.1.3.979.1.3.1 | RowpwAtmInboundEntry | not-accessible | current | A row in this table represents an ATM VC that needs to be sent into the ATM Network after reconstructing cells from Packets received from a PSN This table is i… |
| 1.3.6.1.3.979.1.3.1.1 | ColumnpwAtmInboundAtmIf | read-create | current | The ATM Interface that sends cells into the ATM network after reconstructing cells from packets received from a PSN. |
| 1.3.6.1.3.979.1.3.1.2 | ColumnpwAtmInboundVpi | read-create | current | VPI value of this ATM VC. If the pwVcType is atmNto1Transparent then the value will be set to zero. |
| 1.3.6.1.3.979.1.3.1.3 | ColumnpwAtmInboundVci | read-create | current | VCI value of this ATM VC. If the pwVcType is atmNto1Transparent atmCell1to1Vpc or atmCellNto1Vpc then the value should be set to zero. |
| 1.3.6.1.3.979.1.3.1.4 | ColumnpwAtmInboundTrafficParamDescr | read-create | current | This object represents a pointer to a ATM traffic parameter specification table which will be employed while transmit into the ATM network. This table contains… |
| 1.3.6.1.3.979.1.3.1.5 | ColumnpwAtmInboundRowStatus | read-create | current | This Object is used to create, modify or delete a row in this table. |
| 1.3.6.1.3.979.1.3.1.6 | ColumnpwAtmInboundOamCellSupported | read-create | current | This Object indicates whether this VC can receive OAM Cells. |
| 1.3.6.1.3.979.1.4 | TablepwAtmInboundPerfTable | not-accessible | current | This table specifies the performance for an ATM VC in the Inbound direction. |
| 1.3.6.1.3.979.1.4.1 | RowpwAtmInboundPerfEntry | not-accessible | current | This table specifies performance-related attributes for an ATM VC in the inbound direction. |
| 1.3.6.1.3.979.1.4.1.1 | ColumnpwAtmInboundPerfCellsXmit | read-only | current | This Object indicates the number of cells that were transmitted into ATM network by this VC. |
| 1.3.6.1.3.979.1.4.1.2 | ColumnpwAtmInboundPerfCellsLost | read-only | current | This Object indicates the number of cells that were dropped by this VC. |
| 1.3.6.1.3.979.1.4.1.3 | ColumnpwAtmInboundPerfHCCellsXmit | read-only | current | High Capacity counter for the number of cells that were transmitted into ATM network by this VC. |
| 1.3.6.1.3.979.1.4.1.4 | ColumnpwAtmInboundPerfHCCellsLost | read-only | current | High Capacity counter for number of cells that were dropped by this VC. |
| 1.3.6.1.3.979.2 | NodepwAtmConformance | |||
| 1.3.6.1.3.979.2.1 | NodepwAtmGroups | |||
| 1.3.6.1.3.979.2.1.1 | GrouppwAtmOutboundGroup | current | Collection of objects for basic ATM PW outbound config. | |
| 1.3.6.1.3.979.2.1.2 | GrouppwAtmOutboundPerfGroup | current | Collection of objects counting various outbound ATM PW statistics. | |
| 1.3.6.1.3.979.2.1.3 | GrouppwAtmInboundGroup | current | Collection of objects for basic ATM PW inbound config. | |
| 1.3.6.1.3.979.2.1.4 | GrouppwAtmInboundPerfGroup | current | Collection of objects counting various inbound ATM PW statistics. | |
| 1.3.6.1.3.979.2.2 | NodepwAtmCompliances | |||
| 1.3.6.1.3.979.2.2.1 | CompliancepwAtmModuleCompliance | current | The compliance statement for agent that support PW ATM. |