QB-DWS-MIB
128 objects
This module defines additional objects for the provisioning and management of DWS links in Quantum bridge devices.
Imported Objects
| ATM-TC-MIB | AtmAddr AtmConnCastType AtmConnKind atmNoClpNoScr AtmServiceCategory AtmTrafficDescrParamIndex AtmVcIdentifier AtmVorXAdminStatus AtmVorXLastChange AtmVorXOperStatus AtmVpIdentifier |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| QBSYS-SYSTEM-MIB | qbSysIotSerialNumber qbSysModuleSlot |
| QUANTUMBRIDGE-REG | qbMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.3 | IdentityqbDwsMIB | This module defines additional objects for the provisioning and management of DWS links in Quantum bridge devices. | ||
| 1.3.6.1.4.1.4323.2.3.1 | NodeqbDwsObjects | |||
| 1.3.6.1.4.1.4323.2.3.1.1 | NodeqbDwsNetGroup | |||
| 1.3.6.1.4.1.4323.2.3.1.1.1 | ScalarqbDwsSysRangeMode | read-write | current | The object that indicates a system wide range mode. When read, this object always returns the value 'ready(1)'. Setting this object to rangeAll(2) causes rangi… |
| 1.3.6.1.4.1.4323.2.3.1.1.2 | ScalarqbSysIotRecoverMode | read-write | current | The object allows to set the IOT auto-recovery feature on the IOAS. Auto-recovery is global in scope, so when it is enabled, auto-recovery is attempted for all… |
| 1.3.6.1.4.1.4323.2.3.1.1.3 | TableqbDwsNetTable | not-accessible | current | The Quantum Bridge PON Interface Table contains extensions of the standard MIB Interface Table, one entry per IOAS DWS interface. The table contains read-only … |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1 | RowqbDwsNetEntry | not-accessible | current | An entry in the Quantum Bridge DWS Interface Table that contains the Network interface's specific objects. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.1 | ColumnqbDwsNetIfIndex | read-only | current | The value of this object is the same as the corresponding ifIndex of the Network Interface in the ifTable. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.2 | ColumnqbDwsNetBw | read-only | current | The object indicates the total bandwidth rate that is available for reservation on this interface. This object is specified in Bits per second. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.3 | ColumnqbDwsNetAllocatedBw | read-only | current | The object indicates the total bandwidth rate that is currently subscribed. The subscribed bandwidth rate consists of the bandwidth rate allocated for all prov… |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.4 | ColumnqbDwsNetAvailableBw | read-only | current | The portion of this interface's capacity in bits per sec that is available for data traffic. This variable is adjusted for the allocated bandwidth. The formula… |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.5 | ColumnqbDwsNetAllocatedUbrBw | read-only | current | The object indicates the total number of bandwidth that are currently allocated for packet/ubr traffic. This object is specified in Bps. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.6 | ColumnqbDwsNetAllocatedCbrBw | read-only | current | The object indicates the total number of bandwidth that is currently allocated for CBR traffic. This object is specified in Bps. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.7 | ColumnqbDwsNetNumCbrConn | read-only | current | The object indicates the total number of inactive and in-service CBR connections that are currently provisioned on this interface. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.8 | ColumnqbDwsNetNumUbrConn | read-only | current | The object indicates the total number of inactive and in-serice UBR connections that are currently provisioned on this interface. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.9 | ColumnqbDwsNetNumIot | read-only | current | The number of IOTs that are provisioned on the Network interface. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.10 | ColumnqbDwsNetTxStatus | read-only | current | This objects indicates the status of the DWS transmitter. The trap is generated by the SNMP agent when the IOAS DWS transmitter problem is detected. The trap c… |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.11 | ColumnqbDwsNetTxStatusLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this DWS Interface entered its current status state. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.12 | ColumnqbDwsNetLosIotAddr | read-only | current | The object contains the address of the IOT for which a Los condition is detected. This indicates that no signal was detected within the expected time slot wind… |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.13 | ColumnqbDwsNetLosIotTime | read-only | current | The value of MIB II's sysUpTime object at the time when the qbDwsNetIotLos condition was detected. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.14 | ColumnqbDwsNetEncryptStatus | read-write | current | The object that enables and disables encryption on this interface. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.15 | ColumnqbDwsNetRangeMode | read-write | current | The object that indicates a range mode. When read, this object always returns the value 'ready(1)'. Setting this object to rangeAll(2) causes ranging of all IO… |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.16 | ColumnqbDwsNetRxTsCount | read-only | current | The total number of successfully received time slots. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.17 | ColumnqbDwsNetTxTsCount | read-only | current | The total number of successfully transmitted time slots. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.18 | ColumnqbDwsNetRxMissingTs | read-only | current | The number received time slots that have been missed. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.19 | ColumnqbDwsNetRxIllegalTs | read-only | current | The number illegal received time slots that have been detected. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.20 | ColumnqbDwsNetTxJabberTs | read-only | current | The number jabber transmitted time slots that have been detected. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.21 | ColumnqbDwsNetTxOutOfFrameTs | read-only | current | The number out of frame transmitted timeslots that have been detected. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.22 | ColumnqbDwsNetTxHdrCrcTsErrs | read-only | current | The number transmitted timeslots with the header protection error that have been detected. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.23 | ColumnqbDwsNetOamRequests | read-only | current | The number of OAM requests. These OAM requests are originated by the IOAS and sent to downstream IOTs. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.24 | ColumnqbDwsNetOamResponses | read-only | current | The number of OAM responses. These responses are generated by IOTs in response to downstream requests. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.25 | ColumnqbDwsNetOamEvents | read-only | current | The number of OAM events. These events are originated by IOT devices to signal abnormal conditions. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.26 | ColumnqbDwsNetOamBadMsgs | read-only | current | The total number of bad OAM messages. |
| 1.3.6.1.4.1.4323.2.3.1.1.3.1.27 | ColumnqbDwsNetLoopBack | read-write | current | The Loopback status of this DWS port. Writing configures the port to go into the loopback mode. When placed in loopback mode the DWS port does a 'payload' loop… |
| 1.3.6.1.4.1.4323.2.3.1.2 | NodeqbDwsIotIfGroup | |||
| 1.3.6.1.4.1.4323.2.3.1.2.1 | TableqbDwsIotIfConfTable | not-accessible | current | The Quantum DWS interface table. One entry per each IOT's DWS interface. |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1 | RowqbDwsIotIfConfEntry | not-accessible | current | An entry in the Quantum Bridge DWS Interface Table. The ifIndex is a DWS interface index from ifTable. |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1.1 | ColumnqbDwsIotIfIndex | not-accessible | current | The ifIndex of this interface in the ifTable. |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1.2 | ColumnqbDwsIotNetIfIndex | read-only | current | The ifIndex of this PON interface in the ifTable. |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1.3 | ColumnqbDwsIotIfAddr | read-only | current | The IOT terminal address. |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1.4 | ColumnqbDwsIotIfConfPowerLevel | read-only | current | The DWS interface's power level. |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1.5 | ColumnqbDwsIotIfConfEqDelay | read-only | current | The equal Delay time (in hundredths of a second). |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1.6 | ColumnqbDwsIotIfConfWaveLength | read-only | current | The wave length value for this DWS interface. |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1.7 | ColumnqbDwsIotIfUbrBw | read-only | current | The object indicates the total UBR bandwidth rate that is reserved for a given IOT interface. This object is specified in Bits per second. |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1.8 | ColumnqbDwsIotIfCbrBw | read-only | current | The object indicates the total CBR bandwidth rate that is reserved for a given IOT interface. This object is specified in Bits per second. |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1.9 | ColumnqbDwsIotIfTxStatus | read-only | current | This objects indicates the status of the IOT DWS Port. The txFailure(2) state indicates that the laser transmitter failed. The rxFailure(3) state indicates tha… |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1.10 | ColumnqbDwsIotIfTxStatusLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this DWS Interface enters its current status state. |
| 1.3.6.1.4.1.4323.2.3.1.2.1.1.11 | ColumnqbDwsIotIfLastRangeTime | read-only | current | The value of MIB II's sysUpTime object at the last time when this IOT is ranged |
| 1.3.6.1.4.1.4323.2.3.1.2.2 | TableqbDwsIotIfStatsTable | not-accessible | current | The Quantum Bridge IOT's terminal table. One entry per each RT. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1 | RowqbDwsIotIfStatsEntry | not-accessible | current | An entry in the Quantum DWS Interface Statistics Table. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1.1 | ColumnqbDwsIotIfStatsUtil | read-only | current | The object indicates the utilization of the Network Interface transmission rate capacity by the IOT DWS interface. This object is specified in percents. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1.2 | ColumnqbDwsIotIfStatsOamRequests | read-only | current | The number of received downstream OAM request messages. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1.3 | ColumnqbDwsIotIfStatsOamResponses | read-only | current | The number of transmitted upstream OAM response messages. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1.4 | ColumnqbDwsIotIfStatsOamEvents | read-only | current | The number of OAM event messages originated by the interface. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1.5 | ColumnqbDwsIotIfStatsOamBadMsgs | read-only | current | The number of wrong OAM messages received on this interface. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1.6 | ColumnqbDwsIotIfStatsCrcErrs | read-only | current | The summary number of the IOT DWS CRC subframe and time slot header CRC errors. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1.7 | ColumnqbDwsIotIfStatsTsHdrParityErrs | read-only | current | The number of Time Slot header parity errors that have been detected on the interface. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1.8 | ColumnqbDwsIotIfStatsFrameLossErrs | read-only | current | The number of Loss frame errors that have been detected on the interface. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1.9 | ColumnqbDwsIotIfStatsSignalLossErrs | read-only | current | The number of Loss signal errors that have been detected on the interface. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1.10 | ColumnqbDwsIotIfStatsRxAal1Cells | read-only | current | The number of received AAL1 ATM cells. |
| 1.3.6.1.4.1.4323.2.3.1.2.2.1.11 | ColumnqbDwsIotIfStatsTxAal1Cells | read-only | current | The number of transmitted ATM cells . |
| 1.3.6.1.4.1.4323.2.3.1.3 | NodeqbIotPktIfGroup | |||
| 1.3.6.1.4.1.4323.2.3.1.3.1 | TableqbIotPktIfConfTable | not-accessible | current | The Quantum Bridge PKT configuration table contains cross-connections between Ethernet interfaces and corresponding PVC/AAL5 that are configured at a WAN port.… |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1 | RowqbIotPktIfConfEntry | not-accessible | current | An entry in the Quantum Bridge IP configuration table. For every IP traffic flow, there is a corresponding row in this table which contains a DWS interface ind… |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.1 | ColumnqbIotPktIfConfIndex | not-accessible | current | An interface index of the Ethernet port interface. |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.2 | ColumnqbAtmIfIndex | read-create | current | An interface index of the ATM interface that is stacked on top of the WAN/SONET interface. |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.3 | ColumnqbIotPktIfConfVpi | read-create | current | A VPI of the AAL5 PVC that connects this interface to the ATM cloud. This PVC is automatically configured at the SONET port of the WAN card (atmVclTable). |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.4 | ColumnqbIotPktIfConfVci | read-create | current | A VCI of the AAL5 bi-directional PVC that connects this interface to the ATM cloud. This PVC is automatically configured or removed at the SONET port of the WA… |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.5 | ColumnqbIotPktIfConfConnName | read-create | current | The textual name of the connection(PVC) as specified by a user. It provides a non-volatile handle for this PVC. The supplied name in the qbPktIotIfConfPvcName … |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.6 | ColumnqbIotPktIfConfRxTrafficDescrIndex | read-create | current | The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VCL. |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.7 | ColumnqbIotPktIfConfTxTrafficDescrIndex | read-create | current | The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VCL. |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.8 | ColumnqbIotPktIfConfAdminStatus | read-create | current | The desired administrative status of the packet connection The up and down states indicate that the traffic flow is enabled or disabled respectively across the… |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.9 | ColumnqbIotPktIfConfOperStatus | read-only | current | The current operational status of the connect. |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.10 | ColumnqbIotPktIfConfRowStatus | read-create | current | The status column for this IOT ENET interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) This object may… |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.11 | ColumnqbIotPktIfConfLoopback | read-create | current | This object enables loopback on the IOT ENET enedpoint. |
| 1.3.6.1.4.1.4323.2.3.1.3.1.1.12 | ColumnqbIotPktIfConfConnKind | read-create | current | The PVC connection type. |
| 1.3.6.1.4.1.4323.2.3.1.4 | NodeqbIotAddrGroup | |||
| 1.3.6.1.4.1.4323.2.3.1.4.1 | TableqbIotAddrTable | not-accessible | current | The Quantum Bridge IOT address table. This table contains information to convert an IOT's address into an IOT's serial number. This table has two indexes: 1. I… |
| 1.3.6.1.4.1.4323.2.3.1.4.1.1 | RowqbIotAddrEntry | not-accessible | current | For every IOT terminal there is a row in this table. This contains the IOT address and serial number. |
| 1.3.6.1.4.1.4323.2.3.1.4.1.1.1 | ColumnqbIotAddr | not-accessible | current | The IOT's address. |
| 1.3.6.1.4.1.4323.2.3.1.4.1.1.2 | ColumnqbIotSerialNum | read-only | current | The IOT's serial number. |
| 1.3.6.1.4.1.4323.2.3.1.5 | NodeqbIotPortCrossConnGroup | |||
| 1.3.6.1.4.1.4323.2.3.1.5.1 | TableqbIotPortCrossConnTable | not-accessible | current | The Quantum Bridge IOT port cross-connection table. This table defines all IOT port point-to-point cross-connections within a single OAS system. The connection… |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1 | RowqbIotPortCrossConnEntry | not-accessible | current | An entry in the Quantum Bridge qbIotPortConnTable two contains a connection between the same port type of different IOTs. |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.1 | ColumnqbIotPortCrossConnEndpt1IfIndex | not-accessible | current | The ifIndex of the first IOT port((end-point) for the configured IOT cross-connect. |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.2 | ColumnqbIotPortCrossConnEndpt2IfIndex | not-accessible | current | The ifIndex of the second IOT port(end-point) for the configured IOT cross-connect. |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.3 | ColumnqbIotPortCrossConnAdminStatus | read-create | current | The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VCL. |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.4 | ColumnqbIotPortCrossConnOperStatus | read-only | current | The current operational status of the connection. |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.5 | ColumnqbIotPortCrossConnLastChange | read-only | current | The value of sysUpTime at the time this connection entered its current operational state. |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.6 | ColumnqbIotPortCrossConnRxTrafficDescrIndex | read-create | current | The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this connection. |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.7 | ColumnqbIotPortCrossConnTxTrafficDescrIndex | read-create | current | The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this connection. |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.8 | ColumnqbIotPortCrossConnName | read-create | current | The textual name of the connection as specified by a user. It provides a non-volatile handle for this connection. The supplied name in the qbIotPortConnName is… |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.9 | ColumnqbIotPortCrossConnRowStatus | read-create | current | The status of the port connect entry. Changing the value of this object from 'active' to 'destroy' will remove this entry from the database. It will disrupt tr… |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.10 | ColumnqbIotPortCrossConnLoopback | read-create | current | This object enables loopback on this IOT to IOT port enedpoint. The endpoint on which loopback is enabled is defined by qbIotPortCrossConnLoopbackEndpt. |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.11 | ColumnqbIotPortCrossConnLoopbackEndpt | read-create | current | This object defines loopback on the selected endpoint. |
| 1.3.6.1.4.1.4323.2.3.1.5.1.1.12 | ColumnqbIotPortCrossConnKind | read-create | current | The VCL connection type. |
| 1.3.6.1.4.1.4323.2.3.1.6 | NodeqbTContGroup | |||
| 1.3.6.1.4.1.4323.2.3.1.6.1 | ScalarqbTContNumber | read-only | current | The total number of provisioned Ethernet to ATM PVCs. |
| 1.3.6.1.4.1.4323.2.3.1.6.2 | ScalarqbNextFreeTContIndex | read-only | current | The next available Container index. |
| 1.3.6.1.4.1.4323.2.3.1.6.3 | TableqbTContTable | not-accessible | current | The Quantum Bridge Traffic Container table(TCons) contains traffic containers of IOTs. |
| 1.3.6.1.4.1.4323.2.3.1.6.3.1 | RowqbTContEntry | not-accessible | current | An entry in the qbTContTable. There is one entry in the table per IOT on the PON for Release 3.0. The creation of a row in the qbSysIotTable causes a correspon… |
| 1.3.6.1.4.1.4323.2.3.1.6.3.1.1 | ColumnqbTContIndex | not-accessible | current | The value of this object identifies the row of the Traffic Container Table. Note tht this value can be set to 1 only for Release 3.0. |
| 1.3.6.1.4.1.4323.2.3.1.6.3.1.2 | ColumnqbTContType | read-write | current | The Traffic container type. Note that this object can be set to type1 for Release 3.0 |
| 1.3.6.1.4.1.4323.2.3.1.6.3.1.3 | ColumnqbTContMaxBw | read-write | current | The maximum bandwidth to be assigned to this TCONT. Note that the read-only access is supported for Release 3.0 |
| 1.3.6.1.4.1.4323.2.3.1.6.3.1.4 | ColumnqbTContFixedBw | read-write | current | The lower limit of bandwidth for this TCONT. |
| 1.3.6.1.4.1.4323.2.3.1.6.3.1.5 | ColumnqbTContAssuredBw | read-write | current | The guaranteed minimum bandwidth for this TCONT. TCONT. Note that the read-only access is supported for Release 3.0 |
| 1.3.6.1.4.1.4323.2.3.1.6.3.1.6 | ColumnqbTContGrantNum | read-write | current | FSAN grant number that is assigned to this TCONT. Note that the read-only access is supported for Release 3.0 |
| 1.3.6.1.4.1.4323.2.3.2 | NodeqbDwsNotifications | |||
| 1.3.6.1.4.1.4323.2.3.2.0 | NodeqbDwsNotificationPrefix | |||
| 1.3.6.1.4.1.4323.2.3.2.0.1 | NotificationqbDwsIotRxLos | current | A qbDwsIotRxLos trap indicates Loss of Signal by the IOT's. This trap is generated by an IOT when Analog DS1/E1 Analog or Digital Los occur. | |
| 1.3.6.1.4.1.4323.2.3.2.0.2 | NotificationqbDwsRxIoasLos | current | A qbDwsRxIoasLos trap indicates Loss of Signal by the IOAS's DWS receiver. This trap is generated by an IOAS DWS card when no signal from an IOT is detected wi… | |
| 1.3.6.1.4.1.4323.2.3.2.0.3 | NotificationqbDwsIoasTxFailure | current | A qbDwsTxFailure trap indicates that the IOAS card transmitter does not work. The trap is generated by an IOAS card when the IOAS DWS card transmitter problem … | |
| 1.3.6.1.4.1.4323.2.3.2.0.4 | NotificationqbDwsIotRangeTimeout | current | A qbDwsTxFailure trap indicates that IOT not responding during the ranging process. | |
| 1.3.6.1.4.1.4323.2.3.3 | NodeqbDwsConformance | |||
| 1.3.6.1.4.1.4323.2.3.3.1 | NodeqbDwsCompliances | |||
| 1.3.6.1.4.1.4323.2.3.3.1.1 | ComplianceqbDwsCompliance | current | The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. | |
| 1.3.6.1.4.1.4323.2.3.3.2 | NodeqbDwsGroups | |||
| 1.3.6.1.4.1.4323.2.3.3.2.1 | GroupqbDwsNetGroupInfo | current | The set of all accessible objects in the DWS Network Group of this MIB. | |
| 1.3.6.1.4.1.4323.2.3.3.2.2 | GroupqbDwsIotGroupInfo | current | The set of all accessible objects in the IOT Group of this MIB. | |
| 1.3.6.1.4.1.4323.2.3.3.2.3 | GroupqbDwsPktGroupInfo | current | The set of all accessible objects in the Packet Group ofthis MIB. | |
| 1.3.6.1.4.1.4323.2.3.3.2.4 | GroupqbDwsIotAddrGroupInfo | current | The set of all accessible objects in the IOT address group of this MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| QbAtmAal5EncapsType | INTEGER { qbVcMultiplexRoutedProto(1), qbBridgedProto8023EncapFcs(2), qbBridgedProto8023EncapsNoFcs(3), qbBridgedPropEncaps(4), qbBridgedProtoLLCEncapsNoFcs(5), qbRoutedEncapsNoHdrNoFcs(6) } | current | The type of data encapsulation used over the AAL5 layer. |
| QbBitRate | Gauge32 | current | A data rate in bits/second. |
| QbDwsIfStatus | INTEGER { ok(1), rxFailure(2), txFailure(3), unknown(4) } | current | The status of the DWS Interface |
| QbDwsSrvStatus | INTEGER { avilable(1), empty(2), almostFull(3), overflown(4) } | current | The service status of the DWS Interface |
| QbEnableStatus | INTEGER { enable(1), disable(2) } | current | enable(1) or disable(1) operations. |
| QbPvcConnKind | INTEGER { unknown(0), atmPvcToPvc(1), atmPvpToPvp(2), iotE1ToAtm(3), iotDs1ToAtm(4), iotEnetToAtm(5), vt15ToAtm(6), vc12ToAtm(7), vt15Vt15(8), vc12ToVc12(9), iotE1ToVt15(10), iotDs1ToVt15(11), iotE1ToVc12(12), iotDs1ToVc12(13), iotE1ToIotE1(14), iotDs1ToIotDs1(15), iotEnetToIotEnet(16), vc11ToAtm(17), iotDs1ToVc11(18), vc11ToVc11(19), m13ToAtm(20), iotDs1ToM13(21), m13ToM13(22), atmToEnet(23), atmToDs1(24), atmToE1(25), ds1ToVt15(26), e1ToVc12(27), ds1ToVc11(28), ds1ToM13(29), ds1ToDs1(30), e1ToE1(31), enetToEnet(32), iotDs1ToDs1(33), iotE1ToE1(34), iotEnetToEnet(35), vlanToAtm(36), vlanToGige(37), vlanToIotEnet(38), vlanToEnet(39) } | current | A connection type that can be provisioned. |
| QbSerialNum | Unsigned32 (0..32) | current | The IOT serial number. |