QB-SONET-MIB
24 objects
This module defines additional objects for management of SONET links in Quantum Bridge devices, above and beyond what is defined in the standard SONET mib.
Imported Objects
| IF-MIB | ifIndex |
| QUANTUMBRIDGE-REG | qbMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| SONET-MIB | sonetMediumEntry |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.6 | IdentityqbSonetMIB | This module defines additional objects for management of SONET links in Quantum Bridge devices, above and beyond what is defined in the standard SONET mib. | ||
| 1.3.6.1.4.1.4323.2.6.1 | NodeqbSonetObjects | |||
| 1.3.6.1.4.1.4323.2.6.1.1 | ScalarqbSonetAlarmMode | read-write | current | Setting this object causes enabling or disabling optical ports alarms(LOS, LF, SD or SF). At initial start up time all optical ports are enabled. The user can … |
| 1.3.6.1.4.1.4323.2.6.1.2 | ScalarqbSonetScramblingMode | read-write | current | Setting this object defines whether ATM cell payload is enabled or disabled. At initial start up time scrambling is set to 'enabled(1)' This object is used in … |
| 1.3.6.1.4.1.4323.2.6.1.3 | ScalarqbSonetMediumType | read-write | current | Setting this object defines whether SONET, SDH, SDHDS1, or SONETM13 signal is used across the chassis/slot. At initial start up the object is set to 'sonet(1)'… |
| 1.3.6.1.4.1.4323.2.6.1.4 | ScalarqbSonetSlot | read-write | current | This object defines a scope of the applied configuration parameter. If the object is set to non-zero value all ports of the defined slot are configured. When o… |
| 1.3.6.1.4.1.4323.2.6.2 | NodeqbSonetTables | |||
| 1.3.6.1.4.1.4323.2.6.2.1 | TableqbSonetMediumTable | not-accessible | current | The Quantum Bridge SONET Medium table contains extensions to the SONET Medium table. |
| 1.3.6.1.4.1.4323.2.6.2.1.1 | RowqbSonetMediumEntry | not-accessible | current | An entry in the Quantum Bridge SONET Medium table. |
| 1.3.6.1.4.1.4323.2.6.2.1.1.1 | ColumnqbSonetPortTxClockSource | read-write | deprecated | The source of Transmit Clock. recovered indicates that the recovered receive clock is used as the transmit clock. local indicates that a local clock source is … |
| 1.3.6.1.4.1.4323.2.6.2.1.1.2 | ColumnqbSonetPortScramblingMode | read-write | current | The scrambling mode of the sonet interface. |
| 1.3.6.1.4.1.4323.2.6.2.1.1.3 | ColumnqbSonetPortAlarmMode | read-write | current | The alarm mode of the sonet interface. |
| 1.3.6.1.4.1.4323.2.6.2.1.1.4 | ColumnqbSonetPortMediumType | read-write | current | Setting this object defines whether SONET, SDH, SDHDS1, or SONETM13 signal is used across the chassis/slot. At initial start up the object is set to 'sonet(1)'… |
| 1.3.6.1.4.1.4323.2.6.2.2 | TableqbSonetStatTable | not-accessible | current | The Quantum Bridge SONET Stat table contains SONET statistics. |
| 1.3.6.1.4.1.4323.2.6.2.2.1 | RowqbSonetStatEntry | not-accessible | current | An entry in the Quantum Bridge SONET Stat table. |
| 1.3.6.1.4.1.4323.2.6.2.2.1.1 | ColumnqbSonetSectionBIP | read-only | current | This object gives the number of section bit interleaved parity erorrs. |
| 1.3.6.1.4.1.4323.2.6.2.2.1.2 | ColumnqbSonetLineBIP | read-only | current | This object gives the number of line bit interleaved parity erorrs. |
| 1.3.6.1.4.1.4323.2.6.2.2.1.3 | ColumnqbSonetPathBIP | read-only | current | This object gives the number of path bit interleaved parity erorrs. |
| 1.3.6.1.4.1.4323.2.6.3 | NodeqbSonetConformance | |||
| 1.3.6.1.4.1.4323.2.6.3.1 | NodeqbSonetCompliances | |||
| 1.3.6.1.4.1.4323.2.6.3.1.1 | ComplianceqbSonetCompliance | current | The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. | |
| 1.3.6.1.4.1.4323.2.6.3.2 | NodeqbSonetGroups | |||
| 1.3.6.1.4.1.4323.2.6.3.2.1 | GroupqbSonetAllGroup | current | The set of all accessible objects in this MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| QbSonetType | INTEGER { sonetVT15(1), sdhVC12(2), sdhVC11(3), sonetM13(4), unknown(5) } | current | Defines whether SONET, SDH/VC12, SDHDS1/VC11, SONET/M13 signal is used across the chassis/slot. |