QB-TIMING-MIB
30 objects
This module defines objects for timing management of OAS system.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| QUANTUMBRIDGE-REG | qbMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.11 | IdentityqbTimingMIB | This module defines objects for timing management of OAS system. | ||
| 1.3.6.1.4.1.4323.2.11.1 | NodeqbTimingObjects | |||
| 1.3.6.1.4.1.4323.2.11.1.1 | NodeqbTimingGroup | |||
| 1.3.6.1.4.1.4323.2.11.1.1.1 | ScalarqbTimingModeAdminStatus | read-write | current | The object is used to set the desired timing configuration of an OAS system. Setting this object to 'freerun(1)' depending on the installed TGS3 option, causes… |
| 1.3.6.1.4.1.4323.2.11.1.1.2 | ScalarqbTimingModeOperStatus | read-only | current | The object indicates the actual status of the timing of an OAS system. A value 'notOperational(6)' indicates that the shelf doesn't have operational timing equ… |
| 1.3.6.1.4.1.4323.2.11.1.1.3 | ScalarqbTimingOutputMode | read-write | current | This object is used to disable or enable the BITS output signals at the timing ports. Setting the object to 'lock' or track must be accompanied by setting 'qbT… |
| 1.3.6.1.4.1.4323.2.11.1.1.4 | ScalarqbTimingHoldoverCtl | read-write | current | The object forces the OAS system into one of two states depending on whether the TGS3 is equipped. If the TGS3 card is not installed the set command fails. Set… |
| 1.3.6.1.4.1.4323.2.11.1.1.5 | ScalarqbTimingSourceStatus | read-write | current | This is used to switch the external output source to the primary or secondary source. Note: this object works in conjunction with 'qbTimingModeAdminStatus'. |
| 1.3.6.1.4.1.4323.2.11.1.1.6 | ScalarqbTimingInLineRef | read-write | current | The value of ifIndex corresponding to the optical port interface that provides a source for the system time reference. The object is changed in conjunction wit… |
| 1.3.6.1.4.1.4323.2.11.1.1.7 | ScalarqbTimingOutLineRef | read-write | current | The value of ifIndex corresponding to the port interface that provides a line reference for the external timing outputs. The object is changed in conjunction w… |
| 1.3.6.1.4.1.4323.2.11.1.1.8 | TableqbTimingPortTable | not-accessible | current | A list of timing port entries. The number of entries is 2 (timing_port1 and timing_port2). Every entry contains the following configuration settings: the forma… |
| 1.3.6.1.4.1.4323.2.11.1.1.8.1 | RowqbTimingPortEntry | not-accessible | current | Entry containing information for a particular timing port in the OAS system. |
| 1.3.6.1.4.1.4323.2.11.1.1.8.1.1 | ColumnqbTimingPort | not-accessible | current | The timing port number |
| 1.3.6.1.4.1.4323.2.11.1.1.8.1.2 | ColumnqbTimingPortName | read-only | current | A descriptive string of the timing port |
| 1.3.6.1.4.1.4323.2.11.1.1.8.1.3 | ColumnqbTimingPortFormat | read-write | current | The object is used to set the signal format for the external timing ports. |
| 1.3.6.1.4.1.4323.2.11.1.1.8.1.4 | ColumnqbTimingPortLineCoding | read-write | current | The object is used to set the signal linecoding. |
| 1.3.6.1.4.1.4323.2.11.1.1.8.1.5 | ColumnqbTimingPortFraming | read-write | current | The object is used to set the signal linecoding. |
| 1.3.6.1.4.1.4323.2.11.1.1.8.1.6 | ColumnqbTimingPortCableLength | read-write | current | The object is used to set the range of cable from the OAS to the external synchronization source. The value entered is interpreted by the agent to have a cable… |
| 1.3.6.1.4.1.4323.2.11.1.1.8.1.7 | ColumnqbTimingPortImpedanceMode | read-write | current | The object is used to set the impendance in ohms. Note: this value is applicable only for E1 ports. |
| 1.3.6.1.4.1.4323.2.11.1.1.8.1.8 | ColumnqbTimingPortOperStatus | read-only | current | The object indicates the output operational status of the timing port. up(1) - timing port up down(2)- timing port down los(3) - Los of Signal eqpFailure(4) - … |
| 1.3.6.1.4.1.4323.2.11.1.1.8.1.9 | ColumnqbTimingPortInOperStatus | read-only | current | The object indicates the input operational status of the timing port. up(1) - timing port up down(2)- timing port down los(3) - Los of Signal eqpFailure(4) - E… |
| 1.3.6.1.4.1.4323.2.11.2 | NodeqbTimingTables | |||
| 1.3.6.1.4.1.4323.2.11.3 | NodeqbTimingConformance | |||
| 1.3.6.1.4.1.4323.2.11.3.1 | NodeqbTimingCompliances | |||
| 1.3.6.1.4.1.4323.2.11.3.1.1 | ComplianceqbTimingCompliance | current | The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. | |
| 1.3.6.1.4.1.4323.2.11.3.2 | NodeqbTimingGroups | |||
| 1.3.6.1.4.1.4323.2.11.3.2.1 | GroupqbTimingAllGroup | current | The set of all accessible objects in this MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| QbTimingCableLength | INTEGER { length0to110ft(1), length110to220ft(2), length220to330ft(3), length330to440ft(4), length440to550ft(5), length550to660ft(6), lengthGreater660ft(7) } | current | The range of feet of cable from the QB5000 to the Building Integrated Timing Supply. |
| QbTimingFraming | INTEGER { other(1), dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1CRC(5), dsx1E1MF(6), dsx1E1CRCMF(7), dsx1Unframed(8), dsx1E1Unframed(9), dsx1DS2M12(10), dsx2E2(11), dsx1SF(12) } | current | Indicates the signal framing. |
| QbTimingPort | INTEGER { timing-port1(1), timing-port2(2) } | current | Indicates a selected timing port. |