RAISECOM-ALARM-MGMT-MIB
20 objects
This MIB module contains managed object definitions for MPLS.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex |
| RAISECOM-BASE-MIB | raisecomAgent |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Opaque TimeTicks Unsigned32 zeroDotZero |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8886.1.34 | IdentityraisecomAlarmMgmt | This MIB module contains managed object definitions for MPLS. | ||
| 1.3.6.1.4.1.8886.1.34.1 | NoderaisecomAlarmMgmtObejcts | |||
| 1.3.6.1.4.1.8886.1.34.1.1 | ScalarraisecomAlarmMgmtRaiseDelay | read-write | current | The approximate period from the time a alarm was raised to a time this alarm was reported. |
| 1.3.6.1.4.1.8886.1.34.1.2 | ScalarraisecomAlarmMgmtClearDelay | read-write | current | The approximate period from the time a alarm was cleared to a time this alarm report. |
| 1.3.6.1.4.1.8886.1.34.1.3 | ScalarraisecomAlarmMgmtActiveStoreMode | read-write | current | The storage mode of the alarm active table |
| 1.3.6.1.4.1.8886.1.34.1.4 | ScalarraisecomAlarmMgmtInhibitEnable | read-write | current | Enable or Disable Alarm Inhibit |
| 1.3.6.1.4.1.8886.1.34.1.5 | ScalarraisecomAlarmMgmtSyslogEnable | read-write | current | Enable or Disable write syslog when an alarm raise |
| 1.3.6.1.4.1.8886.1.34.1.6 | ScalarraisecomAlarmMgmtActiveClear | read-write | current | clear active alarm according to the active table third index |
| 1.3.6.1.4.1.8886.1.34.1.7 | TableraisecomAlarmMgmtConfigTable | not-accessible | current | This table specifies the information of alarm configuration. |
| 1.3.6.1.4.1.8886.1.34.1.7.1 | RowraisecomAlarmMgmtConfigEntry | not-accessible | current | A row in this table represents the configuration of specified alarm. |
| 1.3.6.1.4.1.8886.1.34.1.7.1.1 | ColumnraisecomAlarmMgmtId | not-accessible | current | First index of alarm config table which is equal to alarm group Id |
| 1.3.6.1.4.1.8886.1.34.1.7.1.2 | ColumnraisecomAlarmMgmtClear | read-write | current | The swith of alarm clear,when open the swith the related active alarm entry will be deleted from alarm active table |
| 1.3.6.1.4.1.8886.1.34.1.7.1.3 | ColumnraisecomAlarmMgmtReportEnable | read-write | current | Enable or disable Alarm Report |
| 1.3.6.1.4.1.8886.1.34.1.7.1.4 | ColumnraisecomAlarmMgmtMonitorEnable | read-write | current | Enable or disable alarm monitor |
| 1.3.6.1.4.1.8886.1.34.1.7.1.5 | ColumnraisecomAlarmMgmtInverseMode | read-write | current | The mode of alarm inverse |
| 1.3.6.1.4.1.8886.1.34.1.7.1.6 | ColumnraisecomAlarmMgmtModuleName | read-only | current | The module name which this alarm belongs to. |
| 1.3.6.1.4.1.8886.1.34.1.7.1.7 | ColumnraisecomAlarmMgmtGroupName | read-only | current | The name of alarm group. |
| 1.3.6.1.4.1.8886.1.34.1.8 | ScalarraisecomAlarmMgmtRepeatIndex | read-write | current | Alarm will be repeated according to this alarm index. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlarmInverseMode | INTEGER { none(1), auto(2), manual(3) } | current | Describes the mode of alarm inverse |
| AlarmStorageMode | INTEGER { stop(1), loop(2) } | current | Describes how to store alarm active table when the alarm table was full.When the storage mode is stop,the new raised alarm will be discarded.It will not insert to alarm active table. If the storage mode is loop,the olde… |