RAISECOM-DOT1AG-MIB
169 objects
This MIB module defines objects to CFM
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8886.6.1.32 | IdentityrcDot1ag | This MIB module defines objects to CFM | ||
| 1.3.6.1.4.1.8886.6.1.32.0 | NodercDot1agNotifications | |||
| 1.3.6.1.4.1.8886.6.1.32.0.1 | NotificationrcDot1agCfmFaultAlarm | current | A MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whe… | |
| 1.3.6.1.4.1.8886.6.1.32.1 | NodercDot1agMIBObjects | |||
| 1.3.6.1.4.1.8886.6.1.32.1.1 | NodercDot1agCfmStack | |||
| 1.3.6.1.4.1.8886.6.1.32.1.1.1 | TablercDot1agCfmStackTable | not-accessible | current | There is one CFM Stack table per bridge. It permits the retrieval of information about the Maintenance Points configured on any given interface. |
| 1.3.6.1.4.1.8886.6.1.32.1.1.1.1 | RowrcDot1agCfmStackEntry | not-accessible | current | The Stack table entry |
| 1.3.6.1.4.1.8886.6.1.32.1.1.1.1.1 | ColumnrcDot1agCfmStackifIndex | not-accessible | current | This object represents the Bridge Port or aggregated port on which MEPs or MHFs might be configured. Upon a restart of the system, the system SHALL, if necessa… |
| 1.3.6.1.4.1.8886.6.1.32.1.1.1.1.2 | ColumnrcDot1agCfmStackVlanIdOrNone | not-accessible | current | VLAN ID to which the MP is attached, or 0, if none. |
| 1.3.6.1.4.1.8886.6.1.32.1.1.1.1.3 | ColumnrcDot1agCfmStackMdLevel | not-accessible | current | MD Level of the Maintenance Point. |
| 1.3.6.1.4.1.8886.6.1.32.1.1.1.1.4 | ColumnrcDot1agCfmStackDirection | not-accessible | current | Direction in which the MP faces on the Bridge Port |
| 1.3.6.1.4.1.8886.6.1.32.1.1.1.1.5 | ColumnrcDot1agCfmStackMdIndex | read-only | current | The index of the Maintenance Domain in the rcDot1agCfmMdTable to which the MP is associated, or 0, if none. |
| 1.3.6.1.4.1.8886.6.1.32.1.1.1.1.6 | ColumnrcDot1agCfmStackMaIndex | read-only | current | The index of the MA in the rcDot1agCfmMaNetTable and rcDot1agCfmMaCompTable to which the MP is associated, or 0, if none. |
| 1.3.6.1.4.1.8886.6.1.32.1.1.1.1.7 | ColumnrcDot1agCfmStackMepId | read-only | current | If an MEP is configured, the MEPID, else 0 |
| 1.3.6.1.4.1.8886.6.1.32.1.1.1.1.8 | ColumnrcDot1agCfmStackMacAddress | read-only | current | MAC address of the MP. |
| 1.3.6.1.4.1.8886.6.1.32.1.2 | NodercDot1agCfmDefaultMd | |||
| 1.3.6.1.4.1.8886.6.1.32.1.2.1 | ScalarrcDot1agCfmDefaultMdDefLevel | read-write | current | A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for each rcDot1agCfmDefaultM… |
| 1.3.6.1.4.1.8886.6.1.32.1.2.2 | ScalarrcDot1agCfmDefaultMdDefMhfCreation | read-write | current | A value indicating if the Management entity can create MHFs (MIP Half Function) for the VID, for each rcDot1agCfmDefaultMdEntry whose rcDot1agCfmDefaultMdMhfCr… |
| 1.3.6.1.4.1.8886.6.1.32.1.2.3 | ScalarrcDot1agCfmDefaultMdDefIdPermission | read-write | current | Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain, f… |
| 1.3.6.1.4.1.8886.6.1.32.1.2.4 | TablercDot1agCfmDefaultMdTable | not-accessible | current | For each bridge component, the Default MD Level Managed Object controls MHF creation for VIDs that are not attached to a specific Maintenance Association Manag… |
| 1.3.6.1.4.1.8886.6.1.32.1.2.4.1 | RowrcDot1agCfmDefaultMdEntry | not-accessible | current | The Default MD Level table entry. |
| 1.3.6.1.4.1.8886.6.1.32.1.2.4.1.1 | ColumnrcDot1agCfmDefaultMdComponentId | not-accessible | current | The bridge component within the system to which the information in this rcDot1agCfmDefaultMdEntry applies. If the system is not a Bridge, or if only one compon… |
| 1.3.6.1.4.1.8886.6.1.32.1.2.4.1.2 | ColumnrcDot1agCfmDefaultMdPrimaryVid | not-accessible | current | The Primary VID of the VLAN to which this entry's objects apply. |
| 1.3.6.1.4.1.8886.6.1.32.1.2.4.1.3 | ColumnrcDot1agCfmDefaultMdStatus | read-only | current | State of this Default MD Level table entry. True if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as … |
| 1.3.6.1.4.1.8886.6.1.32.1.2.4.1.4 | ColumnrcDot1agCfmDefaultMdLevel | read-write | current | A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for the VLAN to which this e… |
| 1.3.6.1.4.1.8886.6.1.32.1.2.4.1.5 | ColumnrcDot1agCfmDefaultMdMhfCreation | read-write | current | A value indicating if the Management entity can create MHFs (MIP Half Function) for this VID at this MD Level. If this object has the value defMHFdefer, MHF cr… |
| 1.3.6.1.4.1.8886.6.1.32.1.2.4.1.6 | ColumnrcDot1agCfmDefaultMdIdPermission | read-write | current | Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain. I… |
| 1.3.6.1.4.1.8886.6.1.32.1.3 | NodercDot1agCfmVlan | |||
| 1.3.6.1.4.1.8886.6.1.32.1.3.1 | TablercDot1agCfmVlanTable | not-accessible | current | This table defines the association of VIDs into VLANs. There is an entry in this table, for each component of the bridge, for each VID that is: a) a VID belong… |
| 1.3.6.1.4.1.8886.6.1.32.1.3.1.1 | RowrcDot1agCfmVlanEntry | not-accessible | current | The VLAN table entry. |
| 1.3.6.1.4.1.8886.6.1.32.1.3.1.1.1 | ColumnrcDot1agCfmVlanComponentId | not-accessible | current | The bridge component within the system to which the information in this rcDot1agCfmVlanEntry applies. If the system is not a Bridge, or if only one component i… |
| 1.3.6.1.4.1.8886.6.1.32.1.3.1.1.2 | ColumnrcDot1agCfmVlanVid | not-accessible | current | This is a VLAN ID belonging to a VLAN that is associated with more than one VLAN ID, and this is not the Primary VID of the VLAN. |
| 1.3.6.1.4.1.8886.6.1.32.1.3.1.1.3 | ColumnrcDot1agCfmVlanPrimaryVid | read-create | current | This is the Primary VLAN ID of the VLAN with which this entry's rcDot1agCfmVlanVid is associated. This value must not equal the value of rcDot1agCfmVlanVid. |
| 1.3.6.1.4.1.8886.6.1.32.1.3.1.1.4 | ColumnrcDot1agCfmVlanRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.8886.6.1.32.1.4 | NodercDot1agCfmConfigErrorList | |||
| 1.3.6.1.4.1.8886.6.1.32.1.4.1 | TablercDot1agCfmConfigErrorListTable | not-accessible | current | The CFM Configuration Error List table provides a list of Interfaces and VIDs that are incorrectly configured. |
| 1.3.6.1.4.1.8886.6.1.32.1.4.1.1 | RowrcDot1agCfmConfigErrorListEntry | not-accessible | current | The Config Error List Table entry |
| 1.3.6.1.4.1.8886.6.1.32.1.4.1.1.1 | ColumnrcDot1agCfmConfigErrorListVid | not-accessible | current | The VLAN ID of the VLAN with interfaces in error. |
| 1.3.6.1.4.1.8886.6.1.32.1.4.1.1.2 | ColumnrcDot1agCfmConfigErrorListIfIndex | not-accessible | current | This object is the IfIndex of the interface. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes… |
| 1.3.6.1.4.1.8886.6.1.32.1.4.1.1.3 | ColumnrcDot1agCfmConfigErrorListErrorType | read-only | current | A vector of Boolean error conditions from 22.2.4, any of which may be true: 0) CFMleak; 1) ConflictingVids; 2) ExcessiveLevels; 3) OverlappedLevels. |
| 1.3.6.1.4.1.8886.6.1.32.1.5 | NodercDot1agCfmMd | |||
| 1.3.6.1.4.1.8886.6.1.32.1.5.1 | ScalarrcDot1agCfmMdTableNextIndex | read-only | current | This object contains an unused value for rcDot1agCfmMdIndex in the rcDot1agCfmMdTable, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.8886.6.1.32.1.5.2 | TablercDot1agCfmMdTable | not-accessible | current | The Maintenance Domain table. Each row in the table represents a different Maintenance Domain. A Maintenance Domain is described in 802.1ag (3.21) as the netwo… |
| 1.3.6.1.4.1.8886.6.1.32.1.5.2.1 | RowrcDot1agCfmMdEntry | not-accessible | current | The Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage. |
| 1.3.6.1.4.1.8886.6.1.32.1.5.2.1.1 | ColumnrcDot1agCfmMdIndex | not-accessible | current | The index to the Maintenance Domain table. rcDot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity… |
| 1.3.6.1.4.1.8886.6.1.32.1.5.2.1.2 | ColumnrcDot1agCfmMdFormat | read-create | current | The type (and thereby format) of the Maintenance Domain Name. |
| 1.3.6.1.4.1.8886.6.1.32.1.5.2.1.3 | ColumnrcDot1agCfmMdName | read-create | current | The Maintenance Domain name. The type/format of this object is determined by the value of the rcDot1agCfmMdNameType object. Each Maintenance Domain has unique … |
| 1.3.6.1.4.1.8886.6.1.32.1.5.2.1.4 | ColumnrcDot1agCfmMdMdLevel | read-create | current | The Maintenance Domain Level. |
| 1.3.6.1.4.1.8886.6.1.32.1.5.2.1.5 | ColumnrcDot1agCfmMdMhfCreation | read-create | current | Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this Maintenance Domain. Since, in this variable, there is no… |
| 1.3.6.1.4.1.8886.6.1.32.1.5.2.1.6 | ColumnrcDot1agCfmMdMhfIdPermission | read-create | current | Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this Maintenance Domain. Since,… |
| 1.3.6.1.4.1.8886.6.1.32.1.5.2.1.7 | ColumnrcDot1agCfmMdMaNextIndex | read-only | current | Value to be used as the index of the MA table entries, both the rcDot1agCfmMaNetTable and the rcDot1agCfmMaCompTable, for this Maintenance Domain when the mana… |
| 1.3.6.1.4.1.8886.6.1.32.1.5.2.1.8 | ColumnrcDot1agCfmMdRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.8886.6.1.32.1.6 | NodercDot1agCfmMa | |||
| 1.3.6.1.4.1.8886.6.1.32.1.6.1 | TablercDot1agCfmMaNetTable | not-accessible | current | The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the … |
| 1.3.6.1.4.1.8886.6.1.32.1.6.1.1 | RowrcDot1agCfmMaNetEntry | not-accessible | current | The MA table entry. |
| 1.3.6.1.4.1.8886.6.1.32.1.6.1.1.1 | ColumnrcDot1agCfmMaIndex | not-accessible | current | Index of the MA table rcDot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation. |
| 1.3.6.1.4.1.8886.6.1.32.1.6.1.1.2 | ColumnrcDot1agCfmMaNetFormat | read-create | current | The type (and thereby format) of the Maintenance Association Name. |
| 1.3.6.1.4.1.8886.6.1.32.1.6.1.1.3 | ColumnrcDot1agCfmMaNetName | read-create | current | The Short Maintenance Association name. The type/format of this object is determined by the value of the rcDot1agCfmMaNetNameType object. This name must be uni… |
| 1.3.6.1.4.1.8886.6.1.32.1.6.1.1.4 | ColumnrcDot1agCfmMaNetCcmInterval | read-create | current | Interval between CCM transmissions to be used by all MEPs in the MA. |
| 1.3.6.1.4.1.8886.6.1.32.1.6.1.1.5 | ColumnrcDot1agCfmMaNetRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.8886.6.1.32.1.6.2 | TablercDot1agCfmMaCompTable | not-accessible | current | The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the … |
| 1.3.6.1.4.1.8886.6.1.32.1.6.2.1 | RowrcDot1agCfmMaCompEntry | not-accessible | current | The MA table entry. |
| 1.3.6.1.4.1.8886.6.1.32.1.6.2.1.1 | ColumnrcDot1agCfmMaComponentId | not-accessible | current | The bridge component within the system to which the information in this rcDot1agCfmMaCompEntry applies. If the system is not a Bridge, or if only one component… |
| 1.3.6.1.4.1.8886.6.1.32.1.6.2.1.2 | ColumnrcDot1agCfmMaCompPrimaryVlanId | read-create | current | The Primary VLAN ID with which the Maintenance Association is associated, or 0 if the MA is not attached to any VID. If the MA is associated with more than one… |
| 1.3.6.1.4.1.8886.6.1.32.1.6.2.1.3 | ColumnrcDot1agCfmMaCompMhfCreation | read-create | current | Indicates if the Management entity can create MHFs (MIP Half Function) for this MA. |
| 1.3.6.1.4.1.8886.6.1.32.1.6.2.1.4 | ColumnrcDot1agCfmMaCompIdPermission | read-create | current | Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA. |
| 1.3.6.1.4.1.8886.6.1.32.1.6.2.1.5 | ColumnrcDot1agCfmMaCompNumberOfVids | read-only | current | The number of VIDs associated with the MA. |
| 1.3.6.1.4.1.8886.6.1.32.1.6.2.1.6 | ColumnrcDot1agCfmMaCompRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.8886.6.1.32.1.6.3 | TablercDot1agCfmMaMepListTable | not-accessible | current | List of MEPIDs that belong to this MA. Clause 12.14.6.1.3 specifies that a list of MEPIDs in all bridges in that MA, but since SNMP SMI does not allow to state… |
| 1.3.6.1.4.1.8886.6.1.32.1.6.3.1 | RowrcDot1agCfmMaMepListEntry | not-accessible | current | The known MEPS table entry. |
| 1.3.6.1.4.1.8886.6.1.32.1.6.3.1.1 | ColumnrcDot1agCfmMaMepListIdentifier | not-accessible | current | MEPID |
| 1.3.6.1.4.1.8886.6.1.32.1.6.3.1.2 | ColumnrcDot1agCfmMaMepListRowStatus | read-create | current | The status of the row. Read SNMPv2-TC (RFC1903) for an explanation of the possible values this object can take. |
| 1.3.6.1.4.1.8886.6.1.32.1.7 | NodercDot1agCfmMep | |||
| 1.3.6.1.4.1.8886.6.1.32.1.7.1 | TablercDot1agCfmMepTable | not-accessible | current | The Maintenance Association End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1 | RowrcDot1agCfmMepEntry | not-accessible | current | The MEP table entry |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.1 | ColumnrcDot1agCfmMepIdentifier | not-accessible | current | Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a spec… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.2 | ColumnrcDot1agCfmMepIfIndex | read-create | current | This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. … |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.3 | ColumnrcDot1agCfmMepDirection | read-create | current | The direction in which the MEP faces on the Bridge port. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.4 | ColumnrcDot1agCfmMepPrimaryVid | read-create | current | An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.5 | ColumnrcDot1agCfmMepActive | read-create | current | Administrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and false that i… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.6 | ColumnrcDot1agCfmMepFngState | read-only | current | Current state of the MEP Fault Notification Generator State Machine. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.7 | ColumnrcDot1agCfmMepCciEnabled | read-create | current | If set to true, the MEP will generate CCM messages. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.8 | ColumnrcDot1agCfmMepCcmLtmPriority | read-create | current | The priority value for CCMs and LTMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the bridge port for any of thi… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.9 | ColumnrcDot1agCfmMepMacAddress | read-only | current | MAC address of the MEP. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.10 | ColumnrcDot1agCfmMepLowPrDef | read-create | current | An integer value specifying the lowest priority defect that is allowed to generate fault alarm. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.11 | ColumnrcDot1agCfmMepFngAlarmTime | read-create | current | The time that defects must be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s). |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.12 | ColumnrcDot1agCfmMepFngResetTime | read-create | current | The time that defects must be absent before resetting a Fault Alarm (fngResetTime, 20.33.4) (default 10s). |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.13 | ColumnrcDot1agCfmMepHighestPrDefect | read-only | current | The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.14 | ColumnrcDot1agCfmMepDefects | read-only | current | A vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(0) DefMACstatus(1) DefRemoteCCM(2) DefErrorCCM(3) DefXconCCM(4) |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.15 | ColumnrcDot1agCfmMepErrorCcmLastFailure | read-only | current | The last-received CCM that triggered an DefErrorCCM fault. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.16 | ColumnrcDot1agCfmMepXconCcmLastFailure | read-only | current | The last-received CCM that triggered a DefXconCCM fault. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.17 | ColumnrcDot1agCfmMepCcmSequenceErrors | read-only | current | The total number of out-of-sequence CCMs received from all remote MEPs. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.18 | ColumnrcDot1agCfmMepCciSentCcms | read-only | current | Total number of Continuity Check messages transmitted. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.19 | ColumnrcDot1agCfmMepNextLbmTransId | read-only | current | Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps around. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.20 | ColumnrcDot1agCfmMepLbrIn | read-only | current | Total number of valid, in-order Loopback Replies received. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.21 | ColumnrcDot1agCfmMepLbrInOutOfOrder | read-only | current | The total number of valid, out-of-order Loopback Replies received. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.22 | ColumnrcDot1agCfmMepLbrBadMsdu | read-only | current | The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3). |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.23 | ColumnrcDot1agCfmMepLtmNextSeqNumber | read-only | current | Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.24 | ColumnrcDot1agCfmMepUnexpLtrIn | read-only | current | The total number of unexpected LTRs received (20.39.1). |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.25 | ColumnrcDot1agCfmMepLbrOut | read-only | current | Total number of Loopback Replies transmitted. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.26 | ColumnrcDot1agCfmMepTransmitLbmStatus | read-create | current | A Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.27 | ColumnrcDot1agCfmMepTransmitLbmDestMacAddress | read-create | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column rcDot1agCfmMepTransmitL… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.28 | ColumnrcDot1agCfmMepTransmitLbmDestMepId | read-create | current | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used i… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.29 | ColumnrcDot1agCfmMepTransmitLbmDestIsMepId | read-create | current | True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used f… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.30 | ColumnrcDot1agCfmMepTransmitLbmMessages | read-create | current | The number of Loopback messages to be transmitted. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.31 | ColumnrcDot1agCfmMepTransmitLbmDataTlv | read-create | current | An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.32 | ColumnrcDot1agCfmMepTransmitLbmVlanPriority | read-create | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.33 | ColumnrcDot1agCfmMepTransmitLbmVlanDropEnable | read-create | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.34 | ColumnrcDot1agCfmMepTransmitLbmResultOK | read-only | current | Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.35 | ColumnrcDot1agCfmMepTransmitLbmSeqNumber | read-only | current | The Loopback Transaction Identifier (rcDot1agCfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if rcDot1agCfmMepTransmitLbmR… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.36 | ColumnrcDot1agCfmMepTransmitLtmStatus | read-create | current | A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrace Initiator State Machine. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.37 | ColumnrcDot1agCfmMepTransmitLtmFlags | read-create | current | The flags field for LTMs transmitted by the MEP. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.38 | ColumnrcDot1agCfmMepTransmitLtmTargetMacAddress | read-create | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column rcDot1agCfmMepTransmitL… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.39 | ColumnrcDot1agCfmMepTransmitLtmTargetMepId | read-create | current | An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Associ… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.40 | ColumnrcDot1agCfmMepTransmitLtmTargetIsMepId | read-create | current | True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used … |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.41 | ColumnrcDot1agCfmMepTransmitLtmTtl | read-create | current | The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace … |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.42 | ColumnrcDot1agCfmMepTransmitLtmResult | read-only | current | Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.43 | ColumnrcDot1agCfmMepTransmitLtmSeqNumber | read-only | current | The LTM Transaction Identifier (rcDot1agCfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if rcDot1agCfmMepTransmitLtmResult is false. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.44 | ColumnrcDot1agCfmMepTransmitLtmEgressIdentifier | read-create | current | Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-order six octets contain a 48-bit … |
| 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.45 | ColumnrcDot1agCfmMepRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2 | TablercDot1agCfmLtrTable | not-accessible | current | This table extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. SNMP SMI does not allo… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1 | RowrcDot1agCfmLtrEntry | not-accessible | current | The Linktrace Reply table entry. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.1 | ColumnrcDot1agCfmLtrSeqNumber | not-accessible | current | Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.2 | ColumnrcDot1agCfmLtrReceiveOrder | not-accessible | current | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. rcDot1agCfmLtrReceiveOrder are assigned sequentially from 1, … |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.3 | ColumnrcDot1agCfmLtrTtl | read-only | current | TTL field value for a returned LTR. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.4 | ColumnrcDot1agCfmLtrForwarded | read-only | current | Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.5 | ColumnrcDot1agCfmLtrTerminalMep | read-only | current | A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.6 | ColumnrcDot1agCfmLtrLastEgressIdentifier | read-only | current | An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.7 | ColumnrcDot1agCfmLtrNextEgressIdentifier | read-only | current | An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Res… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.8 | ColumnrcDot1agCfmLtrRelay | read-only | current | Value returned in the Relay Action field. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.9 | ColumnrcDot1agCfmLtrChassisIdSubtype | read-only | current | This object specifies the format of the Chassis ID returned in the Sender ID TLV of the LTR, if any. This value is meaningless if the rcDot1agCfmLtrChassisId h… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.10 | ColumnrcDot1agCfmLtrChassisId | read-only | current | The Chassis ID returned in the Sender ID TLV of the LTR, if any. The format of this object is determined by the value of the rcDot1agCfmLtrChassisIdSubtype obj… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.11 | ColumnrcDot1agCfmLtrManAddressDomain | read-only | current | The TDomain that identifies the type and format of the related rcDot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the … |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.12 | ColumnrcDot1agCfmLtrManAddress | read-only | current | The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related o… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.13 | ColumnrcDot1agCfmLtrIngress | read-only | current | The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the LTM. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.14 | ColumnrcDot1agCfmLtrIngressMac | read-only | current | MAC address returned in the ingress MAC address field. If the rcDot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.15 | ColumnrcDot1agCfmLtrIngressPortIdSubtype | read-only | current | Format of the Ingress Port ID. If the rcDot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.16 | ColumnrcDot1agCfmLtrIngressPortId | read-only | current | Ingress Port ID. The format of this object is determined by the value of the rcDot1agCfmLtrIngressPortIdSubtype object. If the rcDot1agCfmLtrIngress object con… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.17 | ColumnrcDot1agCfmLtrEgress | read-only | current | The value returned in the Egress Action Field of the LTM. The value egrNoTlv(0) indicates that no Reply Egress TLV was returned in the LTM. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.18 | ColumnrcDot1agCfmLtrEgressMac | read-only | current | MAC address returned in the egress MAC address field. If the rcDot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are m… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.19 | ColumnrcDot1agCfmLtrEgressPortIdSubtype | read-only | current | Format of the egress Port ID. If the rcDot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.20 | ColumnrcDot1agCfmLtrEgressPortId | read-only | current | Egress Port ID. The format of this object is determined by the value of the rcDot1agCfmLtrEgressPortIdSubtype object. If the rcDot1agCfmLtrEgress object contai… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.2.1.21 | ColumnrcDot1agCfmLtrOrganizationSpecificTlv | read-only | current | All Organization specific TLVs returned in the LTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3 | TablercDot1agCfmMepDbTable | not-accessible | current | The MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain. The SMI does not allow t… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1 | RowrcDot1agCfmMepDbEntry | not-accessible | current | The MEP Database table entry. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1.1 | ColumnrcDot1agCfmMepDbRMepIdentifier | not-accessible | current | Maintenance association End Point Identifier of a remote MEP whose information from the MEP Database is to be returned. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1.2 | ColumnrcDot1agCfmMepDbRMepState | read-only | current | The operational state of the remote MEP IFF State machines. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1.3 | ColumnrcDot1agCfmMepDbRMepFailedOkTime | read-only | current | The time (SysUpTime) at which the IFF Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1.4 | ColumnrcDot1agCfmMepDbMacAddress | read-only | current | The MAC address of the remote MEP. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1.5 | ColumnrcDot1agCfmMepDbRdi | read-only | current | State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1.6 | ColumnrcDot1agCfmMepDbPortStatusTlv | read-only | current | An enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been… |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1.7 | ColumnrcDot1agCfmMepDbInterfaceStatusTlv | read-only | current | An enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no … |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1.8 | ColumnrcDot1agCfmMepDbChassisIdSubtype | read-only | current | This object specifies the format of the Chassis ID received in the last CCM. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1.9 | ColumnrcDot1agCfmMepDbChassisId | read-only | current | The Chassis ID. The format of this object is determined by the value of the rcDot1agCfmLtrChassisIdSubtype object. |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1.10 | ColumnrcDot1agCfmMepDbManAddressDomain | read-only | current | The TDomain that identifies the type and format of the related rcDot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the … |
| 1.3.6.1.4.1.8886.6.1.32.1.7.3.1.11 | ColumnrcDot1agCfmMepDbManAddress | read-only | current | The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related o… |
| 1.3.6.1.4.1.8886.6.1.32.2 | NodercDot1agCfmConformance | |||
| 1.3.6.1.4.1.8886.6.1.32.2.1 | NodercDot1agCfmCompliances | |||
| 1.3.6.1.4.1.8886.6.1.32.2.1.1 | CompliancercDot1agCfmCompliance | not-accessible | current | The compliance statement for support of the CFM MIB module. |
| 1.3.6.1.4.1.8886.6.1.32.2.2 | NodercDot1agCfmGroups | |||
| 1.3.6.1.4.1.8886.6.1.32.2.2.1 | GrouprcDot1agCfmStackGroup | current | Objects for the Stack group. | |
| 1.3.6.1.4.1.8886.6.1.32.2.2.2 | GrouprcDot1agCfmDefaultMdGroup | current | Objects for the Default MD Level group. | |
| 1.3.6.1.4.1.8886.6.1.32.2.2.3 | GrouprcDot1agCfmVlanIdGroup | current | Objects for the VLAN ID group. | |
| 1.3.6.1.4.1.8886.6.1.32.2.2.4 | GrouprcDot1agCfmConfigErrorListGroup | current | Objects for the CFM Configuration Error List Group. | |
| 1.3.6.1.4.1.8886.6.1.32.2.2.5 | GrouprcDot1agCfmMdGroup | current | Objects for the Maintenance Domain Group. | |
| 1.3.6.1.4.1.8886.6.1.32.2.2.6 | GrouprcDot1agCfmMaGroup | current | Objects for the MA group. | |
| 1.3.6.1.4.1.8886.6.1.32.2.2.7 | GrouprcDot1agCfmMepGroup | current | Objects for the MEP group. | |
| 1.3.6.1.4.1.8886.6.1.32.2.2.8 | GrouprcDot1agCfmMepDbGroup | current | Objects for the MEP group. | |
| 1.3.6.1.4.1.8886.6.1.32.2.2.9 | GrouprcDot1agCfmNotificationsGroup | current | Objects for the Notifications group. |