MIB Viewer

RBUC-MIB

48 objects
The Structure of Management Information for the Codan enterprise. Copyright(c) 2009 All rights reserved
Imported Objects
CODAN-SMIsatcomMibs
SNMPv2-SMICounter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TCDateAndTime DisplayString TestAndIncr TEXTUAL-CONVENTION TimeInterval TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.23304.2.1IdentityrbucMIBThe Structure of Management Information for the Codan enterprise. Copyright(c) 2009 All rights reserved
1.3.6.1.4.1.23304.2.1.1Nodeconfiguration
1.3.6.1.4.1.23304.2.1.1.1NodetxSettings
1.3.6.1.4.1.23304.2.1.1.1.1ScalartxOnread-writecurrentSets Tx on/off.
1.3.6.1.4.1.23304.2.1.1.1.2ScalartxDefaultread-writecurrentSets Tx default 1-last 0-off.
1.3.6.1.4.1.23304.2.1.1.1.3ScalartxAttenuatorread-writecurrentSets/Gets Tx attenuation value in 1dBm steps.
1.3.6.1.4.1.23304.2.1.1.2NodepktProtocol
1.3.6.1.4.1.23304.2.1.1.2.1Scalarprotocolread-writecurrentSets/Gets packet protocol 0 - ASCII, 1 - CODAN, 2 - .
1.3.6.1.4.1.23304.2.1.1.2.2Scalaraddressread-writecurrentSets/Gets packet address: 0-31 NDSatcom ...
1.3.6.1.4.1.23304.2.1.1.3NodercSetting
1.3.6.1.4.1.23304.2.1.1.3.1Scalarmoderead-writecurrentSets/Gets redundancy mode 0-none, 1-warm, 2-hot.
1.3.6.1.4.1.23304.2.1.1.3.2ScalaronLineread-writecurrentSets/Gets redundancy mode on on/off line state.
1.3.6.1.4.1.23304.2.1.1.4Nodefreqs
1.3.6.1.4.1.23304.2.1.1.4.1ScalarrfFreqread-writecurrentSets/Gets the RBUC RF frequency.
1.3.6.1.4.1.23304.2.1.1.4.2ScalarifFreqread-writecurrentSets/Gets the RBUC IF frequency.
1.3.6.1.4.1.23304.2.1.1.4.3ScalarloFreqread-writecurrentSets/Gets the RBUC LO frequency.
1.3.6.1.4.1.23304.2.1.1.5Nodemisc
1.3.6.1.4.1.23304.2.1.1.5.1ScalarserIfread-writecurrentSets/Gets serial interface - rate, length, parity, stop, terminate RS422/485.
1.3.6.1.4.1.23304.2.1.1.5.2ScalarserEchoread-writecurrentSets/Gets serial interface echo on/off.
1.3.6.1.4.1.23304.2.1.1.5.3ScalarpwrAlarmThreshread-writecurrentSets/Gets power alarm threshold.
1.3.6.1.4.1.23304.2.1.1.5.4ScalarburstPwrThreshread-writecurrentSets/Gets burst power threshold.
1.3.6.1.4.1.23304.2.1.1.5.5ScalarrefSourceread-writecurrentSets/Gets reference source 0-external, 1-internal.
1.3.6.1.4.1.23304.2.1.1.5.6ScalarledStateread-writecurrentSetS/Gets LEDs status on/off.
1.3.6.1.4.1.23304.2.1.2Nodestatus
1.3.6.1.4.1.23304.2.1.2.1ScalarpaStatusread-onlycurrentGets to 1 when PA is on.
1.3.6.1.4.1.23304.2.1.2.2ScalartxPowerread-onlycurrentGets Tx power format x.x dB.
1.3.6.1.4.1.23304.2.1.2.3ScalartxBurstPowerread-onlycurrentGets Tx power. Format is x.x,y.y,z.z, where x.x is current burst power, y.y is min and z.z is max burts power.
1.3.6.1.4.1.23304.2.1.2.4Scalarfaultsread-onlycurrentGets the current fault status. Format - Bit0 PA fault, Bit1 Fan fault, Bit2 Power fault, Bit3 Temp fault, Bit4 10MHz fault, Bit5 Internal fault Bit6 LNB fault,…
1.3.6.1.4.1.23304.2.1.2.5ScalarlatchedFaultsread-onlycurrentGets the current latched faults. Format is same as Faults.
1.3.6.1.4.1.23304.2.1.2.6Scalartemperatureread-onlycurrentGets the BUC temperature. Format is x.x.
1.3.6.1.4.1.23304.2.1.2.7ScalarminMaxTemperatureread-onlycurrentGets the BUC temperature. Format is x.x,y.y where x.x is max and y.y is min temperature.
1.3.6.1.4.1.23304.2.1.2.8ScalarsystemSettingread-onlycurrentGets the current system status. Format is Bit0 - PA state, Bit1 - RS232 Tx, Bit2 - FSK Tx, Bit3 - RS485 Tx Bit4 - Redundancy mode, Bit5 - Online, Bit6..Bit7 - …
1.3.6.1.4.1.23304.2.1.2.9ScalarsystemPollread-onlycurrentGets the system poll status. Format is Bit0 - Fault, Bit1 - System change.
1.3.6.1.4.1.23304.2.1.2.10ScalardeviceTyperead-onlycurrentGets the device type. Format is X,Y where X is the model and Y is software version.
1.3.6.1.4.1.23304.2.1.2.11Scalargatewayread-onlycurrentGets the BUC gateway address.
1.3.6.1.4.1.23304.2.1.2.12ScalaripAddrread-onlycurrentGets the BUC IP address.
1.3.6.1.4.1.23304.2.1.2.13ScalarmacAddressread-onlycurrentGets the BUC MAC address.
1.3.6.1.4.1.23304.2.1.2.14Scalarnetmaskread-onlycurrentGets the BUC netmask.
1.3.6.1.4.1.23304.2.1.2.15ScalarrefPowerread-onlycurrentGets the BUC reference power.
1.3.6.1.4.1.23304.2.1.2.16ScalarbucConfigurationread-onlycurrentGets the BUC configuration.
1.3.6.1.4.1.23304.2.1.2.17ScalarbuildStandardread-onlycurrentGets the BUC build standard.
1.3.6.1.4.1.23304.2.1.3Nodeinfo
1.3.6.1.4.1.23304.2.1.3.1ScalaridInforead-onlycurrentGets the module firmware revision, serial number and model. This string will have a zero length if the revision is unknown.
1.3.6.1.4.1.23304.2.1.3.2Scalarlimitsread-onlycurrentGets the limit data for the BUC. Format is: Power meter MIN/MAX , IF,RF and LO frequencies. This string will have a zero length if the revision is unknown.
1.3.6.1.4.1.23304.2.1.3.3ScalarpktProtocolsInforead-onlycurrentGets supported packet protocols and the corresponding address ranges.
Type Definitions
NameSyntaxStatusDescription
ComponentRevisionDisplayString(SIZE(2))currentThe hex value in the first octet - xx - represents the major revision no. and the hex value in the second octet - yy - represents the minor revision no.
FaultStatusBITS { pafault(0), lofault(1), internalfault(2), rcfault(3), lnbfault(4) }currentDescribes all the possible faults in the system as a bit pattern.
TxStatusBITS { txrs232(0), txrs485(1), txfsk(2), txfsk(3), txsnmp(4), txtelnet(5) }currentDescribes all the possible faults in the system as a bit pattern.