RC-CFM-MIB

749 objects

OE MIB for Connectivity Fault Management

Imported Objects

IF-MIB	InterfaceIndex InterfaceIndexOrZero
INET-ADDRESS-MIB	InetAddress InetAddressType
Q-BRIDGE-MIB	VlanIdOrNone
RAPID-CITY	CfmNameString EnableValue rcCfm
SNMPv2-SMI	Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TC	DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue

OID	Name	Access	Status	Description
1.3.6.1.4.1.2272.1.69.0	IdentityrcCfmMib			OE MIB for Connectivity Fault Management
1.3.6.1.4.1.2272.1.69.1	TablercCfmMaintenanceDomainTable	not-accessible	current	Connectivity Fault Management Maintenance Domain table
1.3.6.1.4.1.2272.1.69.1.1	RowrcCfmMaintenanceDomainEntry	not-accessible	current	Connectivity Fault Management Maintenance Domain entry.
1.3.6.1.4.1.2272.1.69.1.1.1	ColumnrcCfmMaintenanceDomainIndex	not-accessible	current	Maintenance Domain index
1.3.6.1.4.1.2272.1.69.1.1.2	ColumnrcCfmMaintenanceDomainName	read-create	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.1.1.3	ColumnrcCfmMaintenanceDomainRowStatus	read-create	current	Used to create/delete entries
1.3.6.1.4.1.2272.1.69.1.1.4	ColumnrcCfmMaintenanceDomainNumOfMa	read-only	current	Used to indicate the number of MAs belong to this maintenance domain
1.3.6.1.4.1.2272.1.69.1.1.5	ColumnrcCfmMaintenanceDomainClearStats	read-create	current	To clear the MEPS CCM sending/receiving message counter un der this domain
1.3.6.1.4.1.2272.1.69.1.1.6	ColumnrcCfmMaintenanceDomainLevel	read-write	current	To set the maintenance level in this domain
1.3.6.1.4.1.2272.1.69.1.1.7	ColumnrcCfmMaintenanceDomainNumOfMip	read-only	current	Used to indicate the number of Mips belong to this maintenance domain
1.3.6.1.4.1.2272.1.69.1.1.8	ColumnrcCfmMaintenanceDomainType	read-only	current	To indicate the type of domain
1.3.6.1.4.1.2272.1.69.1.1.9	ColumnrcCfmMaintenanceDomainEventTrapEnable	read-create	current	Event Trap enable
1.3.6.1.4.1.2272.1.69.1.1.10	ColumnrcCfmMaintenanceDomainPmEnable	read-create	current	Performance monitor enable
1.3.6.1.4.1.2272.1.69.1.1.11	ColumnrcCfmMaintenanceDomainClearAisStats	read-write	current	To clear the AIS CCM sending/receiving message counter un der this domain
1.3.6.1.4.1.2272.1.69.2	TablercCfmMaintenanceAssociationTable	not-accessible	current	Connectivity Fault Management Maintenance Association table
1.3.6.1.4.1.2272.1.69.2.1	RowrcCfmMaintenanceAssociationEntry	not-accessible	current	Connectivity Fault Management Maintenance Association entry.
1.3.6.1.4.1.2272.1.69.2.1.1	ColumnrcCfmMaintenanceAssociationDomainIndex	not-accessible	current	Maintenance Association Domain Index
1.3.6.1.4.1.2272.1.69.2.1.2	ColumnrcCfmMaintenanceAssociationAssociationIndex	not-accessible	current	Maintenance Association Index
1.3.6.1.4.1.2272.1.69.2.1.3	ColumnrcCfmMaintenanceAssociationDomainName	read-only	current	Maintenance Association Domain Name
1.3.6.1.4.1.2272.1.69.2.1.4	ColumnrcCfmMaintenanceAssociationAssociationName	read-create	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.2.1.5	ColumnrcCfmMaintenanceAssociationAdminState	read-create	current	Administratively enable or disable a maintenance association.
1.3.6.1.4.1.2272.1.69.2.1.6	ColumnrcCfmMaintenanceAssociationRowStatus	read-create	current	Used to create/delete entries
1.3.6.1.4.1.2272.1.69.2.1.7	ColumnrcCfmMaintenanceAssociationCcmInterval	read-create	current	Interval of periodic Continuity Check Message to be transmitted
1.3.6.1.4.1.2272.1.69.2.1.8	ColumnrcCfmMaintenanceAssociationCcmLifetime	read-create	current	Lifetime of periodic Continuity Check Message
1.3.6.1.4.1.2272.1.69.2.1.9	ColumnrcCfmMaintenanceAssociationCcmPriority	read-create	current	Priority of Continuity Check Message to be transmitted
1.3.6.1.4.1.2272.1.69.2.1.10	ColumnrcCfmMaintenanceAssociationCcmTxEnable	read-create	current	Continuity Check Message transmit enable
1.3.6.1.4.1.2272.1.69.2.1.11	ColumnrcCfmMaintenanceAssociationCcmRxEnable	read-create	current	Continuity Check Message receive enable
1.3.6.1.4.1.2272.1.69.2.1.12	ColumnrcCfmMaintenanceAssociationNumOfMep	read-only	current	Used to indicate the number of MEPs belong to this maintenance association
1.3.6.1.4.1.2272.1.69.2.1.13	ColumnrcCfmMaintenanceAssociationClearStats	read-create	current	To clear the MEPs CCM sending/receiving message counter under this MA
1.3.6.1.4.1.2272.1.69.2.1.14	ColumnrcCfmMaintenanceAssociationAutoDetect	read-create	current	Indicates whether MA allows auto-detect of remote MEPs
1.3.6.1.4.1.2272.1.69.2.1.15	ColumnrcCfmMaintenanceAssociationNumOfRemoteMep	read-only	current	Used to indicate the number of remote MEPs belong to this maintenance association
1.3.6.1.4.1.2272.1.69.2.1.16	ColumnrcCfmMaintenanceAssociationRemoveAutoRmep	read-create	current	Remove auto learned Remote Maintenance Endpoint ID, or 0 for unspecified
1.3.6.1.4.1.2272.1.69.2.1.17	ColumnrcCfmMaintenanceAssociationCcmRdiEnable	read-create	current	Continuity Check Message RDI enable
1.3.6.1.4.1.2272.1.69.2.1.18	ColumnrcCfmMaintenanceAssociationCcmMulticast	read-create	current	Indicates whether MA sends Multicast or Unicast CCMs
1.3.6.1.4.1.2272.1.69.2.1.19	ColumnrcCfmMaintenanceAssociationEventTrapEnable	read-create	current	Event Trap enable This MA level setting overrides MD level setting.
1.3.6.1.4.1.2272.1.69.2.1.20	ColumnrcCfmMaintenanceAssociationPmEnable	read-create	current	Performance monitor enable This MA level setting overrides MD level setting.
1.3.6.1.4.1.2272.1.69.2.1.21	ColumnrcCfmMaintenanceAssociationClearAisStats	read-write	current	To clear the Ais CCM sending/receiving message counter under this MA
1.3.6.1.4.1.2272.1.69.3	TablercCfmMaintenanceEndPointTable	not-accessible	current	Connectivity Fault Management Maintenance Association table
1.3.6.1.4.1.2272.1.69.3.1	RowrcCfmMaintenanceEndPointEntry	not-accessible	current	Connectivity Fault Management Maintenance EndPoint entry.
1.3.6.1.4.1.2272.1.69.3.1.1	ColumnrcCfmMaintenanceEndPointDomainIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.3.1.2	ColumnrcCfmMaintenanceEndPointAssociationIndex	not-accessible	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.3.1.3	ColumnrcCfmMaintenanceEndPointId	not-accessible	current	Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.3.1.4	ColumnrcCfmMaintenanceEndPointDomainName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.3.1.5	ColumnrcCfmMaintenanceEndPointAssociationName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.3.1.6	ColumnrcCfmMaintenanceEndPointAdminState	read-create	current	Administratively enable or disable a maintenance EndPoint.
1.3.6.1.4.1.2272.1.69.3.1.7	ColumnrcCfmMaintenanceEndPointRowStatus	read-create	current	Used to create/delete entries
1.3.6.1.4.1.2272.1.69.3.1.8	ColumnrcCfmMaintenanceEndPointCcmPriority	read-create	current	Priority of Continuity Check Message to be transmitted
1.3.6.1.4.1.2272.1.69.3.1.9	ColumnrcCfmMaintenanceEndPointCcmTxEnable	read-create	current	Continuity Check Message transmit enable
1.3.6.1.4.1.2272.1.69.3.1.10	ColumnrcCfmMaintenanceEndPointCcmRxEnable	read-create	current	Continuity Check Message receive enable
1.3.6.1.4.1.2272.1.69.3.1.11	ColumnrcCfmMaintenanceEndPointMepType	read-only	current	Mep Type
1.3.6.1.4.1.2272.1.69.3.1.12	ColumnrcCfmMaintenanceEndPointClearStats	read-create	current	To clear the MEP CCM sending/receiving message counter
1.3.6.1.4.1.2272.1.69.3.1.13	ColumnrcCfmMaintenanceEndPointServiceDescription	read-only	current	Used to specify what service this mep assigned to
1.3.6.1.4.1.2272.1.69.3.1.14	ColumnrcCfmMaintenanceEndPointRemoveAutoRmep	read-create	current	Remove auto learned Remote Maintenance Endpoint ID, or 0 for unspecified
1.3.6.1.4.1.2272.1.69.3.1.15	ColumnrcCfmMaintenanceEndPointMepStatus	read-only	current	Indicating if the mep status is active or inactive. Only Dual-Home Ring endpoint client meps can have active/inactive status. All other mep types have active s…
1.3.6.1.4.1.2272.1.69.3.1.16	ColumnrcCfmMaintenanceEndPointAisTxEnable	read-create	current	Alarm Indication Signal Message transmit enable
1.3.6.1.4.1.2272.1.69.3.1.17	ColumnrcCfmMaintenanceEndPointAisInterval	read-create	current	Interval of periodic Alarm Indication Signal Message to be transmitted. Unit in milliseconds.
1.3.6.1.4.1.2272.1.69.3.1.18	ColumnrcCfmMaintenanceEndPointIfTlv	read-create	current	Admin control of the Interface-Status-Tlv in maintenanceEndpoint.
1.3.6.1.4.1.2272.1.69.3.1.19	ColumnrcCfmMaintenanceEndPointMepDirection	read-only	current	Indicates the direction in which the Maintenance association faces on the bridge port.
1.3.6.1.4.1.2272.1.69.3.1.20	ColumnrcCfmMaintenanceEndPointClearAisStats	read-create	current	To clear the AIS sending/receiving message counter
1.3.6.1.4.1.2272.1.69.3.1.21	ColumnrcCfmMaintenanceEndPointIfIndex	read-create	current	This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached.
1.3.6.1.4.1.2272.1.69.3.1.22	ColumnrcCfmMaintenanceEndPointCcmVlanId	read-create	current	Customer CCM VLAN ID
1.3.6.1.4.1.2272.1.69.3.1.23	ColumnrcCfmMaintenanceEndPointLabel	read-create	current	User provided field. Used to give extra management information/data.
1.3.6.1.4.1.2272.1.69.4	TablercCfmTrunkGroupTable	not-accessible	current	Connectivity Fault TrunkGroup table
1.3.6.1.4.1.2272.1.69.4.1	RowrcCfmTrunkGroupEntry	not-accessible	current	Connectivity Fault Management TrunkGroup entry.
1.3.6.1.4.1.2272.1.69.4.1.1	ColumnrcCfmTrunkGroupName	not-accessible	current	Trunk Group Name
1.3.6.1.4.1.2272.1.69.4.1.2	ColumnrcCfmTrunkGroupRowStatus	read-create	current	Used to create/delete entries
1.3.6.1.4.1.2272.1.69.4.1.3	ColumnrcCfmTrunkGroupPrimaryTrunk	read-create	current	Trunk Group PBT Primary Trunk Name
1.3.6.1.4.1.2272.1.69.4.1.4	ColumnrcCfmTrunkGroupSecondaryTrunk	read-create	current	Trunk Group PBT Secondary Trunk Name
1.3.6.1.4.1.2272.1.69.4.1.5	ColumnrcCfmTrunkGroupActiveTrunk	read-create	current	Trunk Group PBT Active Trunk Name
1.3.6.1.4.1.2272.1.69.4.1.6	ColumnrcCfmTrunkGroupRevertive	read-create	current	Revertive enable or disable
1.3.6.1.4.1.2272.1.69.4.1.7	ColumnrcCfmTrunkGroupLoopBackVlanId	read-create	current	Loopback VLAN ID for local pbt switching
1.3.6.1.4.1.2272.1.69.4.1.8	ColumnrcCfmTrunkGroupUserLabel1	read-write	current	User provided field. Used to give extra management information/data
1.3.6.1.4.1.2272.1.69.4.1.9	ColumnrcCfmTrunkGroupUserLabel2	read-write	current	User provided additional field. Used to give extra management information/data
1.3.6.1.4.1.2272.1.69.5	TablercCfmTrunkTable	not-accessible	current	Connectivity Fault Trunk table
1.3.6.1.4.1.2272.1.69.5.1	RowrcCfmTrunkEntry	not-accessible	current	Connectivity Fault Management Trunk entry.
1.3.6.1.4.1.2272.1.69.5.1.1	ColumnrcCfmTrunkName	not-accessible	current	PBT Trunk Name
1.3.6.1.4.1.2272.1.69.5.1.2	ColumnrcCfmTrunkPort	read-create	current	PBT Trunk Port
1.3.6.1.4.1.2272.1.69.5.1.3	ColumnrcCfmTrunkAdminState	read-create	current	Administratively enable or disable a PBT trunk.
1.3.6.1.4.1.2272.1.69.5.1.4	ColumnrcCfmTrunkRowStatus	read-create	current	Used to create/delete entries
1.3.6.1.4.1.2272.1.69.5.1.5	ColumnrcCfmTrunkMac	read-create	current	Trunk Mac (remote CP mac)
1.3.6.1.4.1.2272.1.69.5.1.6	ColumnrcCfmTrunkMdName	read-create	current	PBT Trunk Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.5.1.7	ColumnrcCfmTrunkMaName	read-create	current	PBT Trunk Maintenance Association Name
1.3.6.1.4.1.2272.1.69.5.1.8	ColumnrcCfmTrunkVlanId	read-create	current	PBT trunk VLAN ID
1.3.6.1.4.1.2272.1.69.5.1.9	ColumnrcCfmTrunkReverseVlanId	read-create	current	PBT trunk reverse VLAN ID
1.3.6.1.4.1.2272.1.69.5.1.10	ColumnrcCfmTrunkMepId	read-create	current	PBT trunk MEP ID. Range 1-8191 is a valid Mep ID to be assigned to the CFM Trunk. '0' means unassign the Med ID from the CFM Trunk
1.3.6.1.4.1.2272.1.69.5.1.11	ColumnrcCfmTrunkHoldTimer	read-create	current	Trunk hold timer value.
1.3.6.1.4.1.2272.1.69.5.1.12	ColumnrcCfmTrunkOperStatus	read-only	current	The current operational status of this trunk.
1.3.6.1.4.1.2272.1.69.5.1.13	ColumnrcCfmTrunkSourceMac	read-create	current	Trunk Source Mac (local switch PBT mac)
1.3.6.1.4.1.2272.1.69.5.1.14	ColumnrcCfmTrunkClearStats	read-create	current	Action to clear the stats for all trunks
1.3.6.1.4.1.2272.1.69.5.1.15	ColumnrcCfmTrunkUserLabel1	read-write	current	User provided field. Used to give extra management information/data
1.3.6.1.4.1.2272.1.69.5.1.16	ColumnrcCfmTrunkUserLabel2	read-write	current	User provided additional field. Used to give extra management information/data
1.3.6.1.4.1.2272.1.69.5.1.17	ColumnrcCfmTrunkSubportQueueSet	read-create	current	Subport Queue Set Index Number
1.3.6.1.4.1.2272.1.69.5.1.18	ColumnrcCfmTrunkDualHomePartner	read-create	current	Enable PBT trunk as Dual Home Partner
1.3.6.1.4.1.2272.1.69.6	TablercCfmServiceGroupTable	not-accessible	current	Connectivity Fault Service Group table
1.3.6.1.4.1.2272.1.69.6.1	RowrcCfmServiceGroupEntry	not-accessible	current	Connectivity Fault Management ServiceGroup entry.
1.3.6.1.4.1.2272.1.69.6.1.1	ColumnrcCfmServiceGroupName	not-accessible	current	PBT ServiceGroup Name
1.3.6.1.4.1.2272.1.69.6.1.2	ColumnrcCfmServiceGroupPort	read-create	current	PBT ServiceGroup Port
1.3.6.1.4.1.2272.1.69.6.1.3	ColumnrcCfmServiceGroupAdminState	read-create	current	Administratively enable or disable a PBT Service Group.
1.3.6.1.4.1.2272.1.69.6.1.4	ColumnrcCfmServiceGroupRowStatus	read-create	current	Used to create/delete entries
1.3.6.1.4.1.2272.1.69.6.1.5	ColumnrcCfmServiceGroupMac	read-create	current	ServiceGroup Mac (remote mac of NPU)
1.3.6.1.4.1.2272.1.69.6.1.6	ColumnrcCfmServiceGroupMdName	read-create	current	PBT ServiceGroup Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.6.1.7	ColumnrcCfmServiceGroupMaName	read-create	current	PBT ServiceGroup Maintenance Association Name
1.3.6.1.4.1.2272.1.69.6.1.8	ColumnrcCfmServiceGroupTgName	read-create	current	PBT ServiceGroup Trunk Group Name
1.3.6.1.4.1.2272.1.69.6.1.9	ColumnrcCfmServiceGroupMepId	read-create	current	PBT ServiceGroup MEP ID. Range 1-8191 is a valid Mep ID to be assigned to the CFM Service group. '0' means unassign the Med ID from the CFM service group
1.3.6.1.4.1.2272.1.69.6.1.10	ColumnrcCfmServiceGroupRingId	read-create	current	Ring ID associated with Service Group
1.3.6.1.4.1.2272.1.69.6.1.11	ColumnrcCfmServiceGroupCcmOperStatus	read-only	current	The current CCM operational status of this service group.
1.3.6.1.4.1.2272.1.69.7	NodercCfmPbt
1.3.6.1.4.1.2272.1.69.7.1	ScalarrcCfmPbtVlans	read-write	current	Connectivity Fault Management PBT vlan entry.
1.3.6.1.4.1.2272.1.69.7.2	ScalarrcCfmPbtMsti	read-write	current	MSTI instance ID for PBT VLANS
1.3.6.1.4.1.2272.1.69.8	TablercCfmStatsTable	not-accessible	current	CFM stats table
1.3.6.1.4.1.2272.1.69.8.1	RowrcCfmStatsEntry	not-accessible	current	CFM Stats table entry. Contain CFM Message sending/receiving and missing counter
1.3.6.1.4.1.2272.1.69.8.1.1	ColumnrcCfmStatsDomainIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.8.1.2	ColumnrcCfmStatsAssociationIndex	not-accessible	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.8.1.3	ColumnrcCfmStatsDomainName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.8.1.4	ColumnrcCfmStatsAssociationName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.8.1.5	ColumnrcCfmStatsMepId	not-accessible	current	Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.8.1.6	ColumnrcCfmStatsTxCnt	read-only	current	The total Number of CFM messages are transmitted by trunk or ESM port
1.3.6.1.4.1.2272.1.69.8.1.7	ColumnrcCfmStatsRxCnt	read-only	current	The total Number of CFM messages are received by trunk or ESM port
1.3.6.1.4.1.2272.1.69.8.1.8	ColumnrcCfmStatsRxZeroCnt	read-only	current	The total Number of CFM messages are received by trunk or ESM port
1.3.6.1.4.1.2272.1.69.8.1.9	ColumnrcCfmStatsMissedCnt	read-only	current	The total Number of CFM messages are missing on trunk or ESM port
1.3.6.1.4.1.2272.1.69.8.1.10	ColumnrcCfmStatsUpTimeCnt	read-only	current	The total Time of CFM messages are UP on trunk or ESM port in milliseconds
1.3.6.1.4.1.2272.1.69.8.1.11	ColumnrcCfmStatsDefect	read-only	current	An enumerated value indicating the highest-priority defect that has been present since the MEP Fault Notification Generate State Machine was last in the FNG_RE…
1.3.6.1.4.1.2272.1.69.8.1.12	ColumnrcCfmStatsAisTxCnt	read-only	current	The total Number of AIS messages transmitted by Client Mep on Port/MLT
1.3.6.1.4.1.2272.1.69.8.1.13	ColumnrcCfmStatsAisRxCnt	read-only	current	The total Number of AIS messages received by Client Mep on Port/MLT
1.3.6.1.4.1.2272.1.69.8.1.14	ColumnrcCfmStatsAisOperState	read-only	current	To indicate the operational status of AIS. It is set to true when AIS is transmitted. It is set to false when AIS is cleared.
1.3.6.1.4.1.2272.1.69.8.1.15	ColumnrcCfmStatsAisMipLevel	read-only	current	This is Maintenance Domain Level of the MIP on which the AIS is transmitted.
1.3.6.1.4.1.2272.1.69.8.1.16	ColumnrcCfmStatsIfTlvTx	read-only	current	To indicate the operational state of Interface Status TLV transmitted on MaintenanceEndpoint. This status indicates that the state of the local UNI Port.
1.3.6.1.4.1.2272.1.69.8.1.17	ColumnrcCfmStatsAccessDrops	read-only	current	The total number of packets dropped on ingress to access port, for this MEP, due to same or lower MD level
1.3.6.1.4.1.2272.1.69.8.1.18	ColumnrcCfmStatsAggregateUplinkDrops	read-only	current	The total number of packets dropped on ingress to uplink port, for all MEPS, due to lower MD level
1.3.6.1.4.1.2272.1.69.9	NodercCfmTrap
1.3.6.1.4.1.2272.1.69.9.1	ScalarrcCfmTrunkCcmIndication	read-only	current	A Trunk CCM indication signifies that the trunk CCM operational status has changed state to UP or DOWN
1.3.6.1.4.1.2272.1.69.9.2	ScalarrcCfmServiceGroupCcmIndication	read-only	current	A Service Group CCM indication signifies that the service group CCM operational status has changed state to UP or DOWN
1.3.6.1.4.1.2272.1.69.9.3	ScalarrcCfmEndPointCcmIndication	read-only	current	A Endpoint CCM indication signifies that the endpoint CCM operational status has changed state to UP or DOWN
1.3.6.1.4.1.2272.1.69.9.4	ScalarrcCfmTrunkGroupIndication	read-only	current	A Trunk group CCM indication signifies what kind of protection failure within the trunk group
1.3.6.1.4.1.2272.1.69.9.5	ScalarrcCfmTrunkGroupProtected	read-only	current	signifies trunk group was protected or was not protected
1.3.6.1.4.1.2272.1.69.9.6	ScalarrcCfmRemoteMepId	read-only	current	Remote Maintenance Endpoint ID
1.3.6.1.4.1.2272.1.69.9.7	ScalarrcCfmLocalMepId	read-only	current	Local Maintenance Endpoint ID
1.3.6.1.4.1.2272.1.69.9.8	ScalarrcCfmMepCcmIndication	read-only	current	CCM indication signifies that the MEP CCM operational status
1.3.6.1.4.1.2272.1.69.9.9	ScalarrcCfmCvid	read-only	current	A value that uniquely identifies the Customer Vlan Id in i-sid endpt.
1.3.6.1.4.1.2272.1.69.9.10	ScalarrcCfmRemoteMacAddr	read-only	current	remote MAC address
1.3.6.1.4.1.2272.1.69.9.11	ScalarrcCfmIsidId	read-only	current	Service Instance ID of the I component
1.3.6.1.4.1.2272.1.69.9.12	ScalarrcCfmTrapTrunkName	read-only	current	PBT Trunk Name
1.3.6.1.4.1.2272.1.69.9.13	ScalarrcCfmPbitNum	read-only	current	p-bit value used to queue packets
1.3.6.1.4.1.2272.1.69.9.14	ScalarrcCfmUserLabel1	read-only	current	Memo field <Data OSS port ID>
1.3.6.1.4.1.2272.1.69.9.15	ScalarrcCfmUserLabel2	read-only	current	Memo field <Sonet OSS circuit ID>
1.3.6.1.4.1.2272.1.69.9.16	ScalarrcCfmMonitorCosPriority	read-only	current	Monitor customer traffic on COS priority
1.3.6.1.4.1.2272.1.69.9.17	ScalarrcCfmThresholdIndication	read-only	current	A threshold indication is: alarm - when the set-threshold has been exceeded clear - when the clear-threshold level has been reached after an alarm condition
1.3.6.1.4.1.2272.1.69.9.18	ScalarrcCfmActualPercentage	read-only	current	Measured Percentage in 1 percent increments
1.3.6.1.4.1.2272.1.69.9.19	ScalarrcCfmActualSubPercentage	read-only	current	Measured Sub percentage in 1/100 percent increments
1.3.6.1.4.1.2272.1.69.9.20	ScalarrcCfmAlarmThreshold	read-only	current	Configured alarm percentage threshold
1.3.6.1.4.1.2272.1.69.9.21	ScalarrcCfmAlarmSubThreshold	read-only	current	Configured alarm sub percentage threshold
1.3.6.1.4.1.2272.1.69.9.22	ScalarrcCfmClearThreshold	read-only	current	Configured clear percentage threshold
1.3.6.1.4.1.2272.1.69.9.23	ScalarrcCfmClearSubThreshold	read-only	current	Configured clear sub percentage threshold
1.3.6.1.4.1.2272.1.69.9.24	ScalarrcCfmFdTarget	read-only	current	frame delay target
1.3.6.1.4.1.2272.1.69.9.25	ScalarrcCfmFdAverage	read-only	current	frame delay average
1.3.6.1.4.1.2272.1.69.9.26	ScalarrcCfmTime	read-only	current	The date and time stamp.
1.3.6.1.4.1.2272.1.69.9.27	ScalarrcCfmTrapTrunkGroupName	read-only	current	trunk group name.
1.3.6.1.4.1.2272.1.69.9.28	ScalarrcCfmVid	read-only	current	A value that uniquely identifies the Customer Vlan Id in i-sid endpt.
1.3.6.1.4.1.2272.1.69.9.29	ScalarrcCfmFdvTarget	read-only	current	frame delay variation target
1.3.6.1.4.1.2272.1.69.9.30	ScalarrcCfmFdvAverage	read-only	current	frame delay variation average
1.3.6.1.4.1.2272.1.69.9.31	ScalarrcCfmDirection	read-only	current	MEP direction
1.3.6.1.4.1.2272.1.69.9.32	ScalarrcCfmDhuId	read-only	current	A value that uniquely identifies the DH Uni Id in i-sid endpt.
1.3.6.1.4.1.2272.1.69.9.33	ScalarrcCfmIftlvIndication	read-only	current	A Iftlv indication signifies that the operational status of CCM that is sent or received with iftlv has changed state to UP or DOWN
1.3.6.1.4.1.2272.1.69.10	NodercCfmGlobals
1.3.6.1.4.1.2272.1.69.10.1	ScalarrcCfmGlobalsEtherType	read-write	current	CFM Ether Type
1.3.6.1.4.1.2272.1.69.10.2	ScalarrcCfmGlobalsPbtMac	read-write	current	PBT base MAC address
1.3.6.1.4.1.2272.1.69.10.3	ScalarrcCfmGlobalsPortVid	read-write	current	CFM default port vid, 4095 is used for untagged.
1.3.6.1.4.1.2272.1.69.10.4	ScalarrcCfmGlobalsPbtDropTrapTimer	read-write	current	The timer settings for traps being sent on discard of packets with unknown destination MAC in minutes
1.3.6.1.4.1.2272.1.69.10.5	ScalarrcCfmGlobalsPmEnable	read-write	current	Performance monitor enable
1.3.6.1.4.1.2272.1.69.10.6	ScalarrcCfmGlobalsCcmTrapDisplayEnable	read-write	current	CCM trap display enable
1.3.6.1.4.1.2272.1.69.10.7	ScalarrcCfmGlobalsPmLogEnable	read-write	current	Enable PM Auto Logging
1.3.6.1.4.1.2272.1.69.10.8	ScalarrcCfmGlobalsSpbmAdminState	read-write	current	Enable/Disable global cfm support for SPBM VLANs
1.3.6.1.4.1.2272.1.69.10.9	ScalarrcCfmGlobalsSpbmLevel	read-write	current	Used to set the global cfm maintenance level for SPBM VLANs
1.3.6.1.4.1.2272.1.69.10.10	ScalarrcCfmGlobalsSpbmMepId	read-write	current	Set the global cfm Maintenance End Point ID value for SPBM VLANs
1.3.6.1.4.1.2272.1.69.10.11	ScalarrcCfmGlobalsCmacAdminState	read-write	current	Enable/Disable global cfm support for C-VLANs
1.3.6.1.4.1.2272.1.69.10.12	ScalarrcCfmGlobalsCmacLevel	read-write	current	Used to set the global cfm maintenance level for C-VLANs
1.3.6.1.4.1.2272.1.69.10.13	ScalarrcCfmGlobalsCmacMepId	read-write	current	Set the global cfm Maintenance End Point ID value for C-VLANs
1.3.6.1.4.1.2272.1.69.10.14	ScalarrcCfmGlobalsBmac	read-only	current	The Bmac address of the node
1.3.6.1.4.1.2272.1.69.10.15	ScalarrcCfmGlobalsCmac	read-only	current	The Cmac address of the node
1.3.6.1.4.1.2272.1.69.11	TablercCfmRemoteMepConfigTable	not-accessible	current	Connectivity Fault Management Remote Maintenance Association table
1.3.6.1.4.1.2272.1.69.11.1	RowrcCfmRemoteMepConfigEntry	not-accessible	current	Connectivity Fault Management Remote Maintenance EndPoint entry.
1.3.6.1.4.1.2272.1.69.11.1.1	ColumnrcCfmRemoteMepConfigDomainIndex	not-accessible	current	Remote Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.11.1.2	ColumnrcCfmRemoteMepConfigAssociationIndex	not-accessible	current	Remote Maintenance Association Name
1.3.6.1.4.1.2272.1.69.11.1.3	ColumnrcCfmRemoteMepConfigId	not-accessible	current	Remote Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.11.1.4	ColumnrcCfmRemoteMepConfigDomainName	read-only	current	Remote Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.11.1.5	ColumnrcCfmRemoteMepConfigAssociationName	read-only	current	Remote Maintenance Association Name
1.3.6.1.4.1.2272.1.69.11.1.6	ColumnrcCfmRemoteMepConfigMacAddr	read-create	current	Mac address of remote maintenance endpoint
1.3.6.1.4.1.2272.1.69.11.1.7	ColumnrcCfmRemoteMepConfigRowStatus	read-create	current	Used to create/delete entries
1.3.6.1.4.1.2272.1.69.12	TablercCfmRemoteMepStatsTable	not-accessible	current	CFM Mep Learn stats table contains the local and remote mep Tx and Rx statistics
1.3.6.1.4.1.2272.1.69.12.1	RowrcCfmRemoteMepStatsEntry	not-accessible	current	CFM Stats table entry. Contain CFM Message sending/receiving and missing counter. Entry indicate the CCM message still alive
1.3.6.1.4.1.2272.1.69.12.1.1	ColumnrcCfmRemoteMepStatsDomainIndex	not-accessible	current	Maintenance Domain Name index
1.3.6.1.4.1.2272.1.69.12.1.2	ColumnrcCfmRemoteMepStatsAssociationIndex	not-accessible	current	Maintenance Association Name index
1.3.6.1.4.1.2272.1.69.12.1.3	ColumnrcCfmRemoteMepStatsMepId	not-accessible	current	Local MEP (Maintenance EndPoint) ID
1.3.6.1.4.1.2272.1.69.12.1.4	ColumnrcCfmRemoteMepStatsRemoteMepId	not-accessible	current	Remote Mep Id which the local mep rx CCM message from
1.3.6.1.4.1.2272.1.69.12.1.5	ColumnrcCfmRemoteMepStatsDomainName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.12.1.6	ColumnrcCfmRemoteMepStatsAssociationName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.12.1.7	ColumnrcCfmRemoteMepStatsLearnType	read-only	current	Indicate the learning remote Mep is static created or dynamic learn
1.3.6.1.4.1.2272.1.69.12.1.8	ColumnrcCfmRemoteMepStatsRemoteMacAddr	read-only	current	A remote MAC address
1.3.6.1.4.1.2272.1.69.12.1.9	ColumnrcCfmRemoteMepStatsRxCnt	read-only	current	The total Number of CFM messages are received by trunk or ESM port
1.3.6.1.4.1.2272.1.69.12.1.10	ColumnrcCfmRemoteMepStatsSeqErrCnt	read-only	current	The total Number of Sequence errors
1.3.6.1.4.1.2272.1.69.12.1.11	ColumnrcCfmRemoteMepStatsOperState	read-only	current	To indicate the operational state of remote maintenance endpoint
1.3.6.1.4.1.2272.1.69.12.1.12	ColumnrcCfmRemoteMepStatsClearStats	read-write	current	To clear the CCM messages counter
1.3.6.1.4.1.2272.1.69.12.1.13	ColumnrcCfmRemoteMepStatsDbRdi	read-only	current	State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received.
1.3.6.1.4.1.2272.1.69.12.1.14	ColumnrcCfmRemoteMepStatsIfTlvRx	read-only	current	To indicate the operational state of Interface Status TLV received on MaintenanceEndpoint. This status indicates that the state of the remote UNI Port
1.3.6.1.4.1.2272.1.69.13	TablercCfmMaintenanceIntermediatePointTable	not-accessible	current	Connectivity Fault Management Maintenance Intermediate Point table
1.3.6.1.4.1.2272.1.69.13.1	RowrcCfmMaintenanceIntermediatePointEntry	not-accessible	current	Connectivity Fault Management Maintenance Intermediate Point entry.
1.3.6.1.4.1.2272.1.69.13.1.1	ColumnrcCfmMaintenanceIntermediatePointDomainIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.13.1.2	ColumnrcCfmMaintenanceIntermediatePointId	not-accessible	current	Maintenance IntermediatePoint ID
1.3.6.1.4.1.2272.1.69.13.1.3	ColumnrcCfmMaintenanceIntermediatePointDomainName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.13.1.4	ColumnrcCfmMaintenanceIntermediatePointRowStatus	read-create	current	Used to create/delete entries
1.3.6.1.4.1.2272.1.69.13.1.5	ColumnrcCfmMaintenanceIntermediatePointMipType	read-only	current	Mip Type
1.3.6.1.4.1.2272.1.69.13.1.6	ColumnrcCfmMaintenanceIntermediatePointClearStats	read-create	current	To clear the MIP CCM sending/receiving message counter
1.3.6.1.4.1.2272.1.69.13.1.7	ColumnrcCfmMaintenanceIntermediatePointServiceDescription	read-only	current	Used to specify what service this mip assigned to
1.3.6.1.4.1.2272.1.69.14	TablercCfmNniTable	not-accessible	current	CFM NNI table
1.3.6.1.4.1.2272.1.69.14.1	RowrcCfmNniEntry	not-accessible	current	CFM NNI table entry
1.3.6.1.4.1.2272.1.69.14.1.1	ColumnrcCfmNniPort	not-accessible	current	PBT Trunk Port
1.3.6.1.4.1.2272.1.69.14.1.2	ColumnrcCfmNniServiceId	not-accessible	current	TDI or MIM
1.3.6.1.4.1.2272.1.69.14.1.3	ColumnrcCfmNniPwIndex	not-accessible	current	PW index
1.3.6.1.4.1.2272.1.69.14.1.4	ColumnrcCfmNniTlsIndex	not-accessible	current	Access Port
1.3.6.1.4.1.2272.1.69.14.1.5	ColumnrcCfmNniTgName	read-only	current	PBT Trunk Group Name
1.3.6.1.4.1.2272.1.69.15	TablercCfmNniStatsTable	not-accessible	current	CFM NNI stats table
1.3.6.1.4.1.2272.1.69.15.1	RowrcCfmNniStatsEntry	not-accessible	current	CFM NNI Stats table entry. Contain bytes processed and dropped due to lookup failure in the SDT table
1.3.6.1.4.1.2272.1.69.15.1.1	ColumnrcCfmNniStatsPort	not-accessible	current	PBT Trunk Port
1.3.6.1.4.1.2272.1.69.15.1.2	ColumnrcCfmNniStatsOel2RxOctets	read-only	current	The total Number of bytes (OEL2 encapsulation) processed on ingress NNI port
1.3.6.1.4.1.2272.1.69.15.1.3	ColumnrcCfmNniStatsOel2RxDroppedOctets	read-only	current	The total Number of bytes (OEL2 encapsulation) dropped on ingress NNI port
1.3.6.1.4.1.2272.1.69.15.1.4	ColumnrcCfmNniStatsMimRxOctets	read-only	current	The total Number of bytes (MIM encapsulation) processed on ingress NNI port
1.3.6.1.4.1.2272.1.69.15.1.5	ColumnrcCfmNniStatsMimRxDroppedOctets	read-only	current	The total Number of bytes (MIM encapsulation) dropped on ingress NNI port
1.3.6.1.4.1.2272.1.69.15.1.6	ColumnrcCfmNniStatsPweRxOctets	read-only	current	The total Number of bytes (PWE encapsulation) processed on ingress NNI port
1.3.6.1.4.1.2272.1.69.15.1.7	ColumnrcCfmNniStatsPweRxDroppedOctets	read-only	current	The total Number of bytes (PWE encapsulation) dropped on ingress NNI port
1.3.6.1.4.1.2272.1.69.16	TablercCfmMipStatsTable	not-accessible	current	CFM Mip stats table
1.3.6.1.4.1.2272.1.69.16.1	RowrcCfmMipStatsEntry	not-accessible	current	CFM Mip Stats table entry. Contain CFM Mip message number of receiving/replying loopback & linktrace.
1.3.6.1.4.1.2272.1.69.16.1.1	ColumnrcCfmMipStatsDomainIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.16.1.2	ColumnrcCfmMipStatsDomainName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.16.1.3	ColumnrcCfmMipStatsMipId	not-accessible	current	Maintenance Intermediate Point ID
1.3.6.1.4.1.2272.1.69.16.1.4	ColumnrcCfmMipStatsLoopbackReceived	read-only	current	The total Number of CFM loopback messages received.
1.3.6.1.4.1.2272.1.69.16.1.5	ColumnrcCfmMipStatsLoopbackReplied	read-only	current	The total Number of CFM loopback messages replied.
1.3.6.1.4.1.2272.1.69.16.1.6	ColumnrcCfmMipStatsLinktraceReceived	read-only	current	The total Number of CFM linktrace messages received.
1.3.6.1.4.1.2272.1.69.16.1.7	ColumnrcCfmMipStatsLinktraceReplied	read-only	current	The total Number of CFM linktrace messages replied.
1.3.6.1.4.1.2272.1.69.17	TablercCfmTransmitLbmTable	not-accessible	current	Connectivity Fault Management transmit LBM table
1.3.6.1.4.1.2272.1.69.17.1	RowrcCfmTransmitLbmEntry	not-accessible	current	Connectivity Fault Management Maintenance EndPoint LBM entry.
1.3.6.1.4.1.2272.1.69.17.1.1	ColumnrcCfmTransmitLbmDomainIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.17.1.2	ColumnrcCfmTransmitLbmAssociationIndex	not-accessible	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.17.1.3	ColumnrcCfmTransmitLbmIndex	not-accessible	current	Maintenance EndPoint Index
1.3.6.1.4.1.2272.1.69.17.1.4	ColumnrcCfmTransmitLbmDomainName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.17.1.5	ColumnrcCfmTransmitLbmAssociationName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.17.1.6	ColumnrcCfmTransmitLbmDestMacAddress	read-write	current	An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address.
1.3.6.1.4.1.2272.1.69.17.1.7	ColumnrcCfmTransmitLbmDestMepId	read-write	current	An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenanc…
1.3.6.1.4.1.2272.1.69.17.1.8	ColumnrcCfmTransmitLbmDestIsMepId	read-write	current	True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used f…
1.3.6.1.4.1.2272.1.69.17.1.9	ColumnrcCfmTransmitLbmMessages	read-write	current	The number of loopback messages to be transmitted.
1.3.6.1.4.1.2272.1.69.17.1.11	ColumnrcCfmTransmitLbmVlanPriority	read-write	current	Priority. 3 bit value to be used in the VLAN tsg, if present in the transmitted frame.
1.3.6.1.4.1.2272.1.69.17.1.12	ColumnrcCfmTransmitLbmVlanDropEnable	read-write	current	Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame.
1.3.6.1.4.1.2272.1.69.17.1.13	ColumnrcCfmTransmitLbmSeqNumber	read-only	current	The transaction identifier/sequence number of the first loopback message (to be) sent.
1.3.6.1.4.1.2272.1.69.17.1.14	ColumnrcCfmTransmitLbmResultOk	read-only	current	Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent.
1.3.6.1.4.1.2272.1.69.17.1.15	ColumnrcCfmTransmitLbmStatus	read-write	current	Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages.…
1.3.6.1.4.1.2272.1.69.17.1.16	ColumnrcCfmTransmitLbmResult	read-only	current	Display the LBM result.
1.3.6.1.4.1.2272.1.69.17.1.17	ColumnrcCfmTransmitLbmMode	read-write	current	Modes of the transmit loopback service: throughput: The throughput mode of operation. LBM Frame will be sent out at the configured transmit interval rate for t…
1.3.6.1.4.1.2272.1.69.17.1.18	ColumnrcCfmTransmitLbmTimeoutInt	read-write	current	The interval to wait for an LBM time-out with a range of (1..10) seconds with a default value of 3 seconds.
1.3.6.1.4.1.2272.1.69.17.1.19	ColumnrcCfmTransmitLbmInterFrameInt	read-write	current	The interval between LBM frames with a range of (0..1000) msecs with a default value of 500 msecs. The value of 0 msecs indicates to send the frames as fast as…
1.3.6.1.4.1.2272.1.69.17.1.20	ColumnrcCfmTransmitLbmTestPattern	read-write	current	The test pattern to use in the LBM PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a defau…
1.3.6.1.4.1.2272.1.69.17.1.21	ColumnrcCfmTransmitLbmDataSize	read-write	current	An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent.
1.3.6.1.4.1.2272.1.69.17.1.22	ColumnrcCfmTransmitLbmFrameSize	read-write	current	If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV.
1.3.6.1.4.1.2272.1.69.17.1.23	ColumnrcCfmTransmitLbmSourceMode	read-write	current	Source modes of the transmit loopback service.
1.3.6.1.4.1.2272.1.69.18	TablercCfmTransmitLtmTable	not-accessible	current	Connectivity Fault Management transmit LBM table
1.3.6.1.4.1.2272.1.69.18.1	RowrcCfmTransmitLtmEntry	not-accessible	current	Connectivity Fault Management Maintenance EndPoint LTM entry.
1.3.6.1.4.1.2272.1.69.18.1.1	ColumnrcCfmTransmitLtmDomainIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.18.1.2	ColumnrcCfmTransmitLtmAssociationIndex	not-accessible	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.18.1.3	ColumnrcCfmTransmitLtmIndex	not-accessible	current	Maintenance EndPoint Index
1.3.6.1.4.1.2272.1.69.18.1.4	ColumnrcCfmTransmitLtmDomainName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.18.1.5	ColumnrcCfmTransmitLtmAssociationName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.18.1.6	ColumnrcCfmTransmitLtmVlanPriority	read-write	current	Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame.
1.3.6.1.4.1.2272.1.69.18.1.7	ColumnrcCfmTransmitLtmDestMacAddress	read-write	current	An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address.
1.3.6.1.4.1.2272.1.69.18.1.8	ColumnrcCfmTransmitLtmDestMepId	read-write	current	An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenanc…
1.3.6.1.4.1.2272.1.69.18.1.9	ColumnrcCfmTransmitLtmDestIsMepId	read-write	current	True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used f…
1.3.6.1.4.1.2272.1.69.18.1.10	ColumnrcCfmTransmitLtmTtl	read-write	current	The number of hops remaining to this LTM. Decremented by 1 by each Bridge that handles the LTM. The decremented value is returned in the LTR. If 0 on output, t…
1.3.6.1.4.1.2272.1.69.18.1.11	ColumnrcCfmTransmitLtmSeqNumber	read-only	current	The transaction identifier/sequence number of the first loopback message (to be) sent.
1.3.6.1.4.1.2272.1.69.18.1.12	ColumnrcCfmTransmitLtmResultOk	read-only	current	Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent.
1.3.6.1.4.1.2272.1.69.18.1.13	ColumnrcCfmTransmitLtmStatus	read-write	current	Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages.…
1.3.6.1.4.1.2272.1.69.18.1.14	ColumnrcCfmTransmitLtmResult	read-only	obsolete	Display the LTM result.
1.3.6.1.4.1.2272.1.69.18.1.15	ColumnrcCfmTransmitLtmFlag	read-only	current	LTM result flag indicating LTM status or error code. Each enum value represents a status or error case. 1 - No error 2 - Ltm Internal Error 3 - Unknown Remote …
1.3.6.1.4.1.2272.1.69.18.1.16	ColumnrcCfmTransmitLtmSourceMode	read-write	current	Source modes of the transmit linktrace service.
1.3.6.1.4.1.2272.1.69.19	TablercCfmPbtTrunkStatsTable	not-accessible	current	Table of PBT trunk statistics.
1.3.6.1.4.1.2272.1.69.19.1	RowrcCfmPbtTrunkStatsEntry	not-accessible	current	A PBT Trunk Statistics table entry.
1.3.6.1.4.1.2272.1.69.19.1.1	ColumnrcCfmPbtTrunkStatsName	not-accessible	current	PBT Trunk Name.
1.3.6.1.4.1.2272.1.69.19.1.2	ColumnrcCfmPbtTrunkStatsPort	read-only	current	PBT Trunk Port
1.3.6.1.4.1.2272.1.69.19.1.3	ColumnrcCfmPbtTrunkStatsDA	read-only	current	Trunk Mac (remote CP mac)
1.3.6.1.4.1.2272.1.69.19.1.4	ColumnrcCfmPbtTrunkStatsVlanId	read-only	current	PBT trunk VLAN ID
1.3.6.1.4.1.2272.1.69.19.1.5	ColumnrcCfmPbtTrunkStatsRevVlanId	read-only	current	PBT trunk reverse VLAN ID
1.3.6.1.4.1.2272.1.69.19.1.6	ColumnrcCfmPbtTrunkStatsSA	read-only	current	Trunk Source Mac (local switch PBT mac)
1.3.6.1.4.1.2272.1.69.19.1.7	ColumnrcCfmPbtTrunkStatsRxOctets	read-only	current	Number of Octets received by the trunk.This does not include trunk CCM messag (control) packets.
1.3.6.1.4.1.2272.1.69.19.1.8	ColumnrcCfmPbtTrunkStatsRxFrames	read-only	current	Number of Packets received by the trunk.This does not include trunk CCM messag (control) packets.
1.3.6.1.4.1.2272.1.69.19.1.9	ColumnrcCfmPbtTrunkStatsTxOctets	read-only	current	Number of Octets transmitted by the trunk.This does not include trunk CCM messag (control) packets.
1.3.6.1.4.1.2272.1.69.19.1.10	ColumnrcCfmPbtTrunkStatsTxFrames	read-only	current	Number of Packets transmitted by the trunk.This does not include trunk CCM messag (control) packets.
1.3.6.1.4.1.2272.1.69.19.1.11	ColumnrcCfmPbtTrunkStatsRxPbit0Octets	read-only	current	Number of Pbit 0 Octets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.12	ColumnrcCfmPbtTrunkStatsRxPbit0Frames	read-only	current	Number of P-Bit 0 Packets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.13	ColumnrcCfmPbtTrunkStatsRxPbit1Octets	read-only	current	Number of Pbit 1 Octets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.14	ColumnrcCfmPbtTrunkStatsRxPbit1Frames	read-only	current	Number of P-Bit 1 Packets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.15	ColumnrcCfmPbtTrunkStatsRxPbit2Octets	read-only	current	Number of Pbit 2 Octets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.16	ColumnrcCfmPbtTrunkStatsRxPbit2Frames	read-only	current	Number of P-Bit 2 Packets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.17	ColumnrcCfmPbtTrunkStatsRxPbit3Octets	read-only	current	Number of Pbit 3 Octets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.18	ColumnrcCfmPbtTrunkStatsRxPbit3Frames	read-only	current	Number of P-Bit 3 Packets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.19	ColumnrcCfmPbtTrunkStatsRxPbit4Octets	read-only	current	Number of Pbit 4 Octets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.20	ColumnrcCfmPbtTrunkStatsRxPbit4Frames	read-only	current	Number of P-Bit 4 Packets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.21	ColumnrcCfmPbtTrunkStatsRxPbit5Octets	read-only	current	Number of Pbit 5 Octets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.22	ColumnrcCfmPbtTrunkStatsRxPbit5Frames	read-only	current	Number of P-Bit 5 Packets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.23	ColumnrcCfmPbtTrunkStatsRxPbit6Octets	read-only	current	Number of Pbit64 Octets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.24	ColumnrcCfmPbtTrunkStatsRxPbit6Frames	read-only	current	Number of P-Bit 6 Packets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.25	ColumnrcCfmPbtTrunkStatsRxPbit7Octets	read-only	current	Number of Pbit64 Octets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.26	ColumnrcCfmPbtTrunkStatsRxPbit7Frames	read-only	current	Number of P-Bit 6 Packets received by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.27	ColumnrcCfmPbtTrunkStatsTxPbit0Octets	read-only	current	Number of Pbit 0 Octets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.28	ColumnrcCfmPbtTrunkStatsTxPbit0Frames	read-only	current	Number of P-Bit 0 Packets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.29	ColumnrcCfmPbtTrunkStatsTxPbit1Octets	read-only	current	Number of Pbit 1 Octets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.30	ColumnrcCfmPbtTrunkStatsTxPbit1Frames	read-only	current	Number of P-Bit 1 Packets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.31	ColumnrcCfmPbtTrunkStatsTxPbit2Octets	read-only	current	Number of Pbit 2 Octets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.32	ColumnrcCfmPbtTrunkStatsTxPbit2Frames	read-only	current	Number of P-Bit 2 Packets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.33	ColumnrcCfmPbtTrunkStatsTxPbit3Octets	read-only	current	Number of Pbit 3 Octets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.34	ColumnrcCfmPbtTrunkStatsTxPbit3Frames	read-only	current	Number of P-Bit 3 Packets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.35	ColumnrcCfmPbtTrunkStatsTxPbit4Octets	read-only	current	Number of Pbit 4 Octets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.36	ColumnrcCfmPbtTrunkStatsTxPbit4Frames	read-only	current	Number of P-Bit 4 Packets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.37	ColumnrcCfmPbtTrunkStatsTxPbit5Octets	read-only	current	Number of Pbit 5 Octets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.38	ColumnrcCfmPbtTrunkStatsTxPbit5Frames	read-only	current	Number of P-Bit 5 Packets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.39	ColumnrcCfmPbtTrunkStatsTxPbit6Octets	read-only	current	Number of Pbit64 Octets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.40	ColumnrcCfmPbtTrunkStatsTxPbit6Frames	read-only	current	Number of P-Bit 6 Packets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.41	ColumnrcCfmPbtTrunkStatsTxPbit7Octets	read-only	current	Number of Pbit64 Octets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.19.1.42	ColumnrcCfmPbtTrunkStatsTxPbit7Frames	read-only	current	Number of P-Bit 6 Packets transmitted by the trunk.
1.3.6.1.4.1.2272.1.69.20	TablercCfmPortStatsTable	not-accessible	current	CFM Port stats table contains the port Tx and Rx CFM statistics
1.3.6.1.4.1.2272.1.69.20.1	RowrcCfmPortStatsEntry	not-accessible	current	CFM Port Stats table entry. Contain port's CFM Message sending/receiving counter.
1.3.6.1.4.1.2272.1.69.20.1.1	ColumnrcCfmPortStatsIndex	not-accessible	current	Slot/Port index
1.3.6.1.4.1.2272.1.69.20.1.2	ColumnrcCfmPortStatsTxCnt	read-only	current	The total Number of CFM messages that are sent by port
1.3.6.1.4.1.2272.1.69.20.1.3	ColumnrcCfmPortStatsRxCnt	read-only	current	The total Number of CFM messages are received by port
1.3.6.1.4.1.2272.1.69.21	TablercCfmFlrTable	not-accessible	current	Frame Loss Ratio Profile table
1.3.6.1.4.1.2272.1.69.21.1	RowrcCfmFlrEntry	not-accessible	current	Frame Loss Ratio entry.
1.3.6.1.4.1.2272.1.69.21.1.1	ColumnrcCfmFlrIndex	not-accessible	current	Frame-Loss-Ratio profile index
1.3.6.1.4.1.2272.1.69.21.1.2	ColumnrcCfmFlrProfileName	read-create	current	Frame-Loss-Ratio Profile Name
1.3.6.1.4.1.2272.1.69.21.1.3	ColumnrcCfmFlrRowStatus	read-create	current	Used to create/delete entries
1.3.6.1.4.1.2272.1.69.21.1.4	ColumnrcCfmFlrPriority	read-create	current	Frame Loss Ratio messaging runs on COS priority
1.3.6.1.4.1.2272.1.69.21.1.5	ColumnrcCfmFlrAlarmThresholdPercent	read-create	current	FLR set alarm threshold percentage
1.3.6.1.4.1.2272.1.69.21.1.6	ColumnrcCfmFlrAlarmThresholdSubPercent	read-create	current	FLR set alarm threshold percentage in 1/100 percent increments
1.3.6.1.4.1.2272.1.69.21.1.7	ColumnrcCfmFlrClearThresholdPercent	read-create	current	FLR clear alarm threshold percentage
1.3.6.1.4.1.2272.1.69.21.1.8	ColumnrcCfmFlrClearThresholdSubPercent	read-create	current	FLR clear alarm threshold percentage in 1/100 percent increments
1.3.6.1.4.1.2272.1.69.21.1.9	ColumnrcCfmFlrThresholdState	read-create	current	FLR threshold State
1.3.6.1.4.1.2272.1.69.21.1.10	ColumnrcCfmFlrNumberOfRefs	read-only	current	Number of PMs that reference this flr-profile
1.3.6.1.4.1.2272.1.69.22	TablercCfmFdTable	not-accessible	current	CFM Frame Delay and Frame Delay Variation Profile table
1.3.6.1.4.1.2272.1.69.22.1	RowrcCfmFdEntry	not-accessible	current	Frame Delay and Frame Delay Variation entry.
1.3.6.1.4.1.2272.1.69.22.1.1	ColumnrcCfmFdIndex	not-accessible	current	Frame-Delay profile index
1.3.6.1.4.1.2272.1.69.22.1.2	ColumnrcCfmFdProfileName	read-create	current	Frame-Delay Profile Name
1.3.6.1.4.1.2272.1.69.22.1.3	ColumnrcCfmFdRowStatus	read-create	current	Used to create/delete entries
1.3.6.1.4.1.2272.1.69.22.1.4	ColumnrcCfmFdPriority	read-create	current	Frame Delay messaging runs on COS priority
1.3.6.1.4.1.2272.1.69.22.1.5	ColumnrcCfmFdPerformanceTarget	read-create	current	Frame delay performance objective in microseconds
1.3.6.1.4.1.2272.1.69.22.1.6	ColumnrcCfmFdAlarmThresholdPercent	read-create	current	FD set alarm threshold percentage
1.3.6.1.4.1.2272.1.69.22.1.7	ColumnrcCfmFdAlarmThresholdSubPercent	read-create	current	FD set alarm threshold percentage in 1/100 percent incr ements
1.3.6.1.4.1.2272.1.69.22.1.8	ColumnrcCfmFdClearThresholdPercent	read-create	current	FD clear alarm threshold percentage
1.3.6.1.4.1.2272.1.69.22.1.9	ColumnrcCfmFdClearThresholdSubPercent	read-create	current	FD clear alarm threshold percentage in 1/100 percent in crements
1.3.6.1.4.1.2272.1.69.22.1.10	ColumnrcCfmFdFdvPerformanceTarget	read-create	current	Frame delay variation performance objective in microseconds
1.3.6.1.4.1.2272.1.69.22.1.11	ColumnrcCfmFdFdvAlarmThresholdPercent	read-create	current	FDV set alarm threshold percentage
1.3.6.1.4.1.2272.1.69.22.1.12	ColumnrcCfmFdFdvAlarmThresholdSubPercent	read-create	current	FDV set alarm threshold percentage in 1/100 percent inc rements
1.3.6.1.4.1.2272.1.69.22.1.13	ColumnrcCfmFdFdvClearThresholdPercent	read-create	current	FDV clear alarm threshold percentage
1.3.6.1.4.1.2272.1.69.22.1.14	ColumnrcCfmFdFdvClearThresholdSubPercent	read-create	current	FDV clear alarm threshold percentage in 1/100 percent i ncrements
1.3.6.1.4.1.2272.1.69.22.1.15	ColumnrcCfmFdThresholdState	read-create	current	FD / FDV threshold State
1.3.6.1.4.1.2272.1.69.22.1.16	ColumnrcCfmFdNumberOfRefs	read-only	current	Number of PM's that referencen this fd-profile
1.3.6.1.4.1.2272.1.69.23	TablercCfmFlrStatsInfoTable	not-accessible	current	CFM Frame Loss Ratio Stats Info
1.3.6.1.4.1.2272.1.69.23.1	RowrcCfmFlrStatsInfoEntry	not-accessible	current	Frame Loss Ratio Stats Info entry.
1.3.6.1.4.1.2272.1.69.23.1.1	ColumnrcCfmFlrStatsInfoMdIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.23.1.2	ColumnrcCfmFlrStatsInfoMaIndex	not-accessible	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.23.1.3	ColumnrcCfmFlrStatsInfoMepId	not-accessible	current	Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.23.1.4	ColumnrcCfmFlrStatsInfoRmepId	not-accessible	current	Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
1.3.6.1.4.1.2272.1.69.23.1.5	ColumnrcCfmFlrStatsInfoPriorityIndex	not-accessible	current	priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
1.3.6.1.4.1.2272.1.69.23.1.6	ColumnrcCfmFlrStatsInfoMdName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.23.1.7	ColumnrcCfmFlrStatsInfoMaName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.23.1.8	ColumnrcCfmFlrStatsInfoPriority	read-only	current	Frame Loss Ratio messaging runs on COS priority
1.3.6.1.4.1.2272.1.69.23.1.9	ColumnrcCfmFlrStatsInfoNearEndPercent	read-only	current	Measured near-end FLR percentage
1.3.6.1.4.1.2272.1.69.23.1.10	ColumnrcCfmFlrStatsInfoNearEndSubPercent	read-only	current	Measured near-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.23.1.11	ColumnrcCfmFlrStatsInfoFarEndPercent	read-only	current	Measured far-end FLR percentage
1.3.6.1.4.1.2272.1.69.23.1.12	ColumnrcCfmFlrStatsInfoFarEndSubPercent	read-only	current	Measured far-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.23.1.13	ColumnrcCfmFlrStatsInfoPmOperState	read-only	current	The operational state of the PM.
1.3.6.1.4.1.2272.1.69.24	TablercCfmFlrStatsCurrTable	not-accessible	current	CFM Frame Loss Ratio Stats Current
1.3.6.1.4.1.2272.1.69.24.1	RowrcCfmFlrStatsCurrEntry	not-accessible	current	CFM Frame Loss Ratio Stats Current entry.
1.3.6.1.4.1.2272.1.69.24.1.1	ColumnrcCfmFlrStatsCurrMdIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.24.1.2	ColumnrcCfmFlrStatsCurrMaIndex	not-accessible	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.24.1.3	ColumnrcCfmFlrStatsCurrMepId	not-accessible	current	Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.24.1.4	ColumnrcCfmFlrStatsCurrRmepId	not-accessible	current	Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
1.3.6.1.4.1.2272.1.69.24.1.5	ColumnrcCfmFlrStatsCurrPriorityIndex	not-accessible	current	priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
1.3.6.1.4.1.2272.1.69.24.1.6	ColumnrcCfmFlrStatsCurrMdName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.24.1.7	ColumnrcCfmFlrStatsCurrMaName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.24.1.8	ColumnrcCfmFlrStatsCurrPriority	read-only	current	Frame Loss Ratio messaging runs on COS priority
1.3.6.1.4.1.2272.1.69.24.1.9	ColumnrcCfmFlrStatsCurrPmOperState	read-only	current	The operational state of the PM.
1.3.6.1.4.1.2272.1.69.24.1.10	ColumnrcCfmFlrStatsCurrStartTime	read-only	current	The date and time stamp.
1.3.6.1.4.1.2272.1.69.24.1.11	ColumnrcCfmFlrStatsCurrEndTime	read-only	current	The date and time stamp.
1.3.6.1.4.1.2272.1.69.24.1.12	ColumnrcCfmFlrStatsCurrHistInterval	read-only	current	History Interval
1.3.6.1.4.1.2272.1.69.24.1.13	ColumnrcCfmFlrStatsCurrSampleRate	read-only	current	Sample rate in seconds
1.3.6.1.4.1.2272.1.69.24.1.14	ColumnrcCfmFlrStatsCurrNearEndPercent	read-only	current	Measured near-end FLR percentage
1.3.6.1.4.1.2272.1.69.24.1.15	ColumnrcCfmFlrStatsCurrNearEndSubPercent	read-only	current	Measured near-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.24.1.16	ColumnrcCfmFlrStatsCurrFarEndPercent	read-only	current	Measured far-end FLR percentage
1.3.6.1.4.1.2272.1.69.24.1.17	ColumnrcCfmFlrStatsCurrFarEndSubPercent	read-only	current	Measured far-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.24.1.18	ColumnrcCfmFlrStatsCurrMinNearEndPercent	read-only	current	Measured near-end FLR percentage
1.3.6.1.4.1.2272.1.69.24.1.19	ColumnrcCfmFlrStatsCurrMinNearEndSubPercent	read-only	current	Measured near-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.24.1.20	ColumnrcCfmFlrStatsCurrMinFarEndPercent	read-only	current	Measured near-end FLR percentage
1.3.6.1.4.1.2272.1.69.24.1.21	ColumnrcCfmFlrStatsCurrMinFarEndSubPercent	read-only	current	Measured near-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.24.1.22	ColumnrcCfmFlrStatsCurrMaxNearEndPercent	read-only	current	Measured near-end FLR percentage
1.3.6.1.4.1.2272.1.69.24.1.23	ColumnrcCfmFlrStatsCurrMaxNearEndSubPercent	read-only	current	Measured near-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.24.1.24	ColumnrcCfmFlrStatsCurrMaxFarEndPercent	read-only	current	Measured near-end FLR percentage
1.3.6.1.4.1.2272.1.69.24.1.25	ColumnrcCfmFlrStatsCurrMaxFarEndSubPercent	read-only	current	Measured near-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.24.1.26	ColumnrcCfmFlrStatsCurrTxFrames	read-only	current	Tx frames
1.3.6.1.4.1.2272.1.69.24.1.27	ColumnrcCfmFlrStatsCurrRxFrames	read-only	current	Rx frames
1.3.6.1.4.1.2272.1.69.24.1.28	ColumnrcCfmFlrStatsCurrFlFrames	read-only	current	Frame Loss frames
1.3.6.1.4.1.2272.1.69.24.1.29	ColumnrcCfmFlrStatsCurrTxFarEndFrames	read-only	current	Far-end Tx frames
1.3.6.1.4.1.2272.1.69.24.1.30	ColumnrcCfmFlrStatsCurrRxFarEndFrames	read-only	current	Far-end Rx frames
1.3.6.1.4.1.2272.1.69.24.1.31	ColumnrcCfmFlrStatsCurrFlFarEndFrames	read-only	current	Far-end Frame Loss frames
1.3.6.1.4.1.2272.1.69.24.1.32	ColumnrcCfmFlrStatsCurrSamplesPerInterval	read-only	current	Samples per interval
1.3.6.1.4.1.2272.1.69.24.1.33	ColumnrcCfmFlrStatsCurrSamplesTransmitted	read-only	current	Samples transmitted
1.3.6.1.4.1.2272.1.69.24.1.34	ColumnrcCfmFlrStatsCurrMinFlFrames	read-only	current	Minimum sample Frame Loss frames
1.3.6.1.4.1.2272.1.69.24.1.35	ColumnrcCfmFlrStatsCurrSamplesNotSent	read-only	current	Samples not sent
1.3.6.1.4.1.2272.1.69.24.1.36	ColumnrcCfmFlrStatsCurrSamplesReceived	read-only	current	Samples received
1.3.6.1.4.1.2272.1.69.24.1.37	ColumnrcCfmFlrStatsCurrMinFlFarEndFrames	read-only	current	Minimum sample Far-end Frame Loss frames
1.3.6.1.4.1.2272.1.69.24.1.38	ColumnrcCfmFlrStatsCurrMaxFlFrames	read-only	current	Maximum sample Frame Loss frames
1.3.6.1.4.1.2272.1.69.24.1.39	ColumnrcCfmFlrStatsCurrMaxFlFarEndFrames	read-only	current	Maximum sample Far-end Frame Loss frames
1.3.6.1.4.1.2272.1.69.25	TablercCfmFlrStatsHistTable	not-accessible	current	CFM Frame Loss Ratio Stats History
1.3.6.1.4.1.2272.1.69.25.1	RowrcCfmFlrStatsHistEntry	not-accessible	current	CFM Frame Loss Ratio Stats History entry.
1.3.6.1.4.1.2272.1.69.25.1.1	ColumnrcCfmFlrStatsHistMdIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.25.1.2	ColumnrcCfmFlrStatsHistMaIndex	not-accessible	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.25.1.3	ColumnrcCfmFlrStatsHistMepId	not-accessible	current	Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.25.1.4	ColumnrcCfmFlrStatsHistRmepId	not-accessible	current	Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
1.3.6.1.4.1.2272.1.69.25.1.5	ColumnrcCfmFlrStatsHistPriorityIndex	not-accessible	current	priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
1.3.6.1.4.1.2272.1.69.25.1.6	ColumnrcCfmFlrStatsHistIndex	not-accessible	current	History Index
1.3.6.1.4.1.2272.1.69.25.1.7	ColumnrcCfmFlrStatsHistMdName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.25.1.8	ColumnrcCfmFlrStatsHistMaName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.25.1.9	ColumnrcCfmFlrStatsHistPriority	read-only	current	Frame Loss Ratio messaging runs on COS priority
1.3.6.1.4.1.2272.1.69.25.1.10	ColumnrcCfmFlrStatsHistStatus	read-only	current	The status of this history interval.
1.3.6.1.4.1.2272.1.69.25.1.11	ColumnrcCfmFlrStatsHistStartTime	read-only	current	The date and time stamp.
1.3.6.1.4.1.2272.1.69.25.1.12	ColumnrcCfmFlrStatsHistEndTime	read-only	current	The date and time stamp.
1.3.6.1.4.1.2272.1.69.25.1.13	ColumnrcCfmFlrStatsHistHistInterval	read-only	current	History Interval
1.3.6.1.4.1.2272.1.69.25.1.14	ColumnrcCfmFlrStatsHistSampleRate	read-only	current	Sample rate in seconds
1.3.6.1.4.1.2272.1.69.25.1.15	ColumnrcCfmFlrStatsHistNearEndPercent	read-only	current	Measured near-end FLR percentage
1.3.6.1.4.1.2272.1.69.25.1.16	ColumnrcCfmFlrStatsHistNearEndSubPercent	read-only	current	Measured near-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.25.1.17	ColumnrcCfmFlrStatsHistFarEndPercent	read-only	current	Measured far-end FLR percentage
1.3.6.1.4.1.2272.1.69.25.1.18	ColumnrcCfmFlrStatsHistFarEndSubPercent	read-only	current	Measured far-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.25.1.19	ColumnrcCfmFlrStatsHistMinNearEndPercent	read-only	current	Measured near-end FLR percentage
1.3.6.1.4.1.2272.1.69.25.1.20	ColumnrcCfmFlrStatsHistMinNearEndSubPercent	read-only	current	Measured near-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.25.1.21	ColumnrcCfmFlrStatsHistMinFarEndPercent	read-only	current	Measured near-end FLR percentage
1.3.6.1.4.1.2272.1.69.25.1.22	ColumnrcCfmFlrStatsHistMinFarEndSubPercent	read-only	current	Measured near-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.25.1.23	ColumnrcCfmFlrStatsHistMaxNearEndPercent	read-only	current	Measured near-end FLR percentage
1.3.6.1.4.1.2272.1.69.25.1.24	ColumnrcCfmFlrStatsHistMaxNearEndSubPercent	read-only	current	Measured near-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.25.1.25	ColumnrcCfmFlrStatsHistMaxFarEndPercent	read-only	current	Measured near-end FLR percentage
1.3.6.1.4.1.2272.1.69.25.1.26	ColumnrcCfmFlrStatsHistMaxFarEndSubPercent	read-only	current	Measured near-end FLR sub percentage
1.3.6.1.4.1.2272.1.69.25.1.27	ColumnrcCfmFlrStatsHistTxFrames	read-only	current	Tx frames
1.3.6.1.4.1.2272.1.69.25.1.28	ColumnrcCfmFlrStatsHistRxFrames	read-only	current	Rx frames
1.3.6.1.4.1.2272.1.69.25.1.29	ColumnrcCfmFlrStatsHistFlFrames	read-only	current	Frame Loss frames
1.3.6.1.4.1.2272.1.69.25.1.30	ColumnrcCfmFlrStatsHistTxFarEndFrames	read-only	current	Far-end Tx frames
1.3.6.1.4.1.2272.1.69.25.1.31	ColumnrcCfmFlrStatsHistRxFarEndFrames	read-only	current	Far-end Rx frames
1.3.6.1.4.1.2272.1.69.25.1.32	ColumnrcCfmFlrStatsHistFlFarEndFrames	read-only	current	Far-end Frame Loss frames
1.3.6.1.4.1.2272.1.69.25.1.33	ColumnrcCfmFlrStatsHistSamplesPerInterval	read-only	current	Samples per interval
1.3.6.1.4.1.2272.1.69.25.1.34	ColumnrcCfmFlrStatsHistSamplesTransmitted	read-only	current	Samples transmitted
1.3.6.1.4.1.2272.1.69.25.1.35	ColumnrcCfmFlrStatsHistMinFlFrames	read-only	current	Minimum sample Frame Loss frames
1.3.6.1.4.1.2272.1.69.25.1.36	ColumnrcCfmFlrStatsHistSamplesNotSent	read-only	current	Samples not sent
1.3.6.1.4.1.2272.1.69.25.1.37	ColumnrcCfmFlrStatsHistSamplesReceived	read-only	current	Samples received
1.3.6.1.4.1.2272.1.69.25.1.38	ColumnrcCfmFlrStatsHistMinFlFarEndFrames	read-only	current	Minimum sample Far-end Frame Loss frames
1.3.6.1.4.1.2272.1.69.25.1.39	ColumnrcCfmFlrStatsHistMaxFlFrames	read-only	current	Maximum sample Frame Loss frames
1.3.6.1.4.1.2272.1.69.25.1.40	ColumnrcCfmFlrStatsHistMaxFlFarEndFrames	read-only	current	Maximum sample Far-end Frame Loss frames
1.3.6.1.4.1.2272.1.69.26	TablercCfmFdStatsInfoTable	not-accessible	current	CFM Frame Delay Stats Info
1.3.6.1.4.1.2272.1.69.26.1	RowrcCfmFdStatsInfoEntry	not-accessible	current	Frame Delay Stats Info entry.
1.3.6.1.4.1.2272.1.69.26.1.1	ColumnrcCfmFdStatsInfoMdIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.26.1.2	ColumnrcCfmFdStatsInfoMaIndex	not-accessible	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.26.1.3	ColumnrcCfmFdStatsInfoMepId	not-accessible	current	Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.26.1.4	ColumnrcCfmFdStatsInfoRmepId	not-accessible	current	Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
1.3.6.1.4.1.2272.1.69.26.1.5	ColumnrcCfmFdStatsInfoPriorityIndex	not-accessible	current	priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
1.3.6.1.4.1.2272.1.69.26.1.6	ColumnrcCfmFdStatsInfoMdName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.26.1.7	ColumnrcCfmFdStatsInfoMaName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.26.1.8	ColumnrcCfmFdStatsInfoPriority	read-only	current	Frame Delay messaging runs on COS priority
1.3.6.1.4.1.2272.1.69.26.1.9	ColumnrcCfmFdStatsInfoFdPercent	read-only	current	Measured FD percentage
1.3.6.1.4.1.2272.1.69.26.1.10	ColumnrcCfmFdStatsInfoFdSubPercent	read-only	current	Measured FD sub percentage
1.3.6.1.4.1.2272.1.69.26.1.11	ColumnrcCfmFdStatsInfoFdvPercent	read-only	current	Measured FDV percentage
1.3.6.1.4.1.2272.1.69.26.1.12	ColumnrcCfmFdStatsInfoFdvSubPercent	read-only	current	Measured FDV sub percentage
1.3.6.1.4.1.2272.1.69.26.1.13	ColumnrcCfmFdStatsInfoPmOperState	read-only	current	The operational state of the PM.
1.3.6.1.4.1.2272.1.69.27	TablercCfmFdStatsCurrTable	not-accessible	current	CFM Frame Delay Stats Current
1.3.6.1.4.1.2272.1.69.27.1	RowrcCfmFdStatsCurrEntry	not-accessible	current	CFM Frame Delay Stats Current entry.
1.3.6.1.4.1.2272.1.69.27.1.1	ColumnrcCfmFdStatsCurrMdIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.27.1.2	ColumnrcCfmFdStatsCurrMaIndex	not-accessible	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.27.1.3	ColumnrcCfmFdStatsCurrMepId	not-accessible	current	Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.27.1.4	ColumnrcCfmFdStatsCurrRmepId	not-accessible	current	Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
1.3.6.1.4.1.2272.1.69.27.1.5	ColumnrcCfmFdStatsCurrPriorityIndex	not-accessible	current	priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
1.3.6.1.4.1.2272.1.69.27.1.6	ColumnrcCfmFdStatsCurrMdName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.27.1.7	ColumnrcCfmFdStatsCurrMaName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.27.1.8	ColumnrcCfmFdStatsCurrPriority	read-only	current	Frame Delay messaaging runs on COS priority
1.3.6.1.4.1.2272.1.69.27.1.9	ColumnrcCfmFdStatsCurrFdPercent	read-only	current	Measured FD percentage
1.3.6.1.4.1.2272.1.69.27.1.10	ColumnrcCfmFdStatsCurrFdSubPercent	read-only	current	Measured FD sub percentage
1.3.6.1.4.1.2272.1.69.27.1.11	ColumnrcCfmFdStatsCurrFdvPercent	read-only	current	Measured FDV percentage
1.3.6.1.4.1.2272.1.69.27.1.12	ColumnrcCfmFdStatsCurrFdvSubPercent	read-only	current	Measured FDV sub percentage
1.3.6.1.4.1.2272.1.69.27.1.13	ColumnrcCfmFdStatsCurrPmOperState	read-only	current	The operational state of the PM.
1.3.6.1.4.1.2272.1.69.27.1.14	ColumnrcCfmFdStatsCurrStartTime	read-only	current	The date and time stamp.
1.3.6.1.4.1.2272.1.69.27.1.15	ColumnrcCfmFdStatsCurrEndTime	read-only	current	The date and time stamp.
1.3.6.1.4.1.2272.1.69.27.1.16	ColumnrcCfmFdStatsCurrHistInterval	read-only	current	History Interval
1.3.6.1.4.1.2272.1.69.27.1.17	ColumnrcCfmFdStatsCurrSampleRate	read-only	current	Sample rate in seconds
1.3.6.1.4.1.2272.1.69.27.1.18	ColumnrcCfmFdStatsCurrTarget	read-only	current	FD target in microseconds
1.3.6.1.4.1.2272.1.69.27.1.19	ColumnrcCfmFdStatsCurrAverage	read-only	current	FD average in microseconds
1.3.6.1.4.1.2272.1.69.27.1.20	ColumnrcCfmFdStatsCurrMinimum	read-only	current	FD minimum in microseconds
1.3.6.1.4.1.2272.1.69.27.1.21	ColumnrcCfmFdStatsCurrMaximum	read-only	current	FD maximum in microseconds
1.3.6.1.4.1.2272.1.69.27.1.22	ColumnrcCfmFdStatsCurrFdvTarget	read-only	current	FDV target in microseconds
1.3.6.1.4.1.2272.1.69.27.1.23	ColumnrcCfmFdStatsCurrFdvAverage	read-only	current	FDV average in microseconds
1.3.6.1.4.1.2272.1.69.27.1.24	ColumnrcCfmFdStatsCurrFdvMinimum	read-only	current	FDV minimum in microseconds
1.3.6.1.4.1.2272.1.69.27.1.25	ColumnrcCfmFdStatsCurrFdvMaximum	read-only	current	FDV maximum in microseconds
1.3.6.1.4.1.2272.1.69.27.1.26	ColumnrcCfmFdStatsCurrSamplesPerInterval	read-only	current	Samples per interval
1.3.6.1.4.1.2272.1.69.27.1.27	ColumnrcCfmFdStatsCurrSamplesTransmitted	read-only	current	Samples transmitted
1.3.6.1.4.1.2272.1.69.27.1.28	ColumnrcCfmFdStatsCurrSamplesNotSent	read-only	current	Samples not sent
1.3.6.1.4.1.2272.1.69.27.1.29	ColumnrcCfmFdStatsCurrSamplesReceived	read-only	current	Samples received
1.3.6.1.4.1.2272.1.69.28	TablercCfmFdStatsHistTable	not-accessible	current	CFM Frame Delay Stats History
1.3.6.1.4.1.2272.1.69.28.1	RowrcCfmFdStatsHistEntry	not-accessible	current	CFM Frame Delay Stats History entry.
1.3.6.1.4.1.2272.1.69.28.1.1	ColumnrcCfmFdStatsHistMdIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.28.1.2	ColumnrcCfmFdStatsHistMaIndex	not-accessible	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.28.1.3	ColumnrcCfmFdStatsHistMepId	not-accessible	current	Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.28.1.4	ColumnrcCfmFdStatsHistRmepId	not-accessible	current	Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
1.3.6.1.4.1.2272.1.69.28.1.5	ColumnrcCfmFdStatsHistPriorityIndex	not-accessible	current	priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
1.3.6.1.4.1.2272.1.69.28.1.6	ColumnrcCfmFdStatsHistIndex	not-accessible	current	History Index
1.3.6.1.4.1.2272.1.69.28.1.7	ColumnrcCfmFdStatsHistMdName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.28.1.8	ColumnrcCfmFdStatsHistMaName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.28.1.9	ColumnrcCfmFdStatsHistPriority	read-only	current	Frame Delay messaging runs on COS priority
1.3.6.1.4.1.2272.1.69.28.1.10	ColumnrcCfmFdStatsHistFdPercent	read-only	current	Measured FD percentage
1.3.6.1.4.1.2272.1.69.28.1.11	ColumnrcCfmFdStatsHistFdSubPercent	read-only	current	Measured FD sub percentage
1.3.6.1.4.1.2272.1.69.28.1.12	ColumnrcCfmFdStatsHistFdvPercent	read-only	current	Measured FDV percentage
1.3.6.1.4.1.2272.1.69.28.1.13	ColumnrcCfmFdStatsHistFdvSubPercent	read-only	current	Measured FDV sub percentage
1.3.6.1.4.1.2272.1.69.28.1.14	ColumnrcCfmFdStatsHistStatus	read-only	current	The status of this history interval.
1.3.6.1.4.1.2272.1.69.28.1.15	ColumnrcCfmFdStatsHistStartTime	read-only	current	The date and time stamp.
1.3.6.1.4.1.2272.1.69.28.1.16	ColumnrcCfmFdStatsHistEndTime	read-only	current	The date and time stamp.
1.3.6.1.4.1.2272.1.69.28.1.17	ColumnrcCfmFdStatsHistHistInterval	read-only	current	History Interval
1.3.6.1.4.1.2272.1.69.28.1.18	ColumnrcCfmFdStatsHistSampleRate	read-only	current	Sample rate in seconds
1.3.6.1.4.1.2272.1.69.28.1.19	ColumnrcCfmFdStatsHistTarget	read-only	current	FD target in microseconds
1.3.6.1.4.1.2272.1.69.28.1.20	ColumnrcCfmFdStatsHistAverage	read-only	current	FD average in microseconds
1.3.6.1.4.1.2272.1.69.28.1.21	ColumnrcCfmFdStatsHistMinimum	read-only	current	FD minimum in microseconds
1.3.6.1.4.1.2272.1.69.28.1.22	ColumnrcCfmFdStatsHistMaximum	read-only	current	FD maximum in microseconds
1.3.6.1.4.1.2272.1.69.28.1.23	ColumnrcCfmFdStatsHistFdvTarget	read-only	current	FDV target in microseconds
1.3.6.1.4.1.2272.1.69.28.1.24	ColumnrcCfmFdStatsHistFdvAverage	read-only	current	FDV average in microseconds
1.3.6.1.4.1.2272.1.69.28.1.25	ColumnrcCfmFdStatsHistFdvMinimum	read-only	current	FDV minimum in microseconds
1.3.6.1.4.1.2272.1.69.28.1.26	ColumnrcCfmFdStatsHistFdvMaximum	read-only	current	FDV maximum in microseconds
1.3.6.1.4.1.2272.1.69.28.1.27	ColumnrcCfmFdStatsHistSamplesPerInterval	read-only	current	Samples per interval
1.3.6.1.4.1.2272.1.69.28.1.28	ColumnrcCfmFdStatsHistSamplesTransmitted	read-only	current	Samples transmitted
1.3.6.1.4.1.2272.1.69.28.1.29	ColumnrcCfmFdStatsHistSamplesNotSent	read-only	current	Samples not sent
1.3.6.1.4.1.2272.1.69.28.1.30	ColumnrcCfmFdStatsHistSamplesReceived	read-only	current	Samples received
1.3.6.1.4.1.2272.1.69.29	TablercCfmPmTable	not-accessible	current	CFM Performance Monitoring Configuration
1.3.6.1.4.1.2272.1.69.29.1	RowrcCfmPmEntry	not-accessible	current	Connectivity Fault Management Performance Monitoring entry.
1.3.6.1.4.1.2272.1.69.29.1.1	ColumnrcCfmPmMdIndex	not-accessible	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.29.1.2	ColumnrcCfmPmMaIndex	not-accessible	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.29.1.3	ColumnrcCfmPmMepId	not-accessible	current	Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.29.1.4	ColumnrcCfmPmRmepId	not-accessible	current	Remote Maintenance Endpoint ID. The performance monitoring pair is MepId-RmepId
1.3.6.1.4.1.2272.1.69.29.1.5	ColumnrcCfmPmMdName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.29.1.6	ColumnrcCfmPmMaName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.29.1.7	ColumnrcCfmPmRowStatus	read-create	current	Used to create/delete entries
1.3.6.1.4.1.2272.1.69.29.1.8	ColumnrcCfmPmState	read-create	current	Performance Monitoring State
1.3.6.1.4.1.2272.1.69.29.1.9	ColumnrcCfmPmFdList	read-create	current	Comma separated list of Frame-Delay profile names. Valid profile names must first be created using rcCfmFdProfileName. Number of entries in the list is indicat…
1.3.6.1.4.1.2272.1.69.29.1.10	ColumnrcCfmPmFdSize	read-only	current	Number of Frame-Delay profiles names
1.3.6.1.4.1.2272.1.69.29.1.11	ColumnrcCfmPmFlrList	read-create	current	Comma separated list of Frame-Loss-Ratio profile names. Valid profile names must first be created using rcCfmFlrProfileName. Number of entries in the list is i…
1.3.6.1.4.1.2272.1.69.29.1.12	ColumnrcCfmPmFlrSize	read-only	current	Number of FLR profile names in FLR list
1.3.6.1.4.1.2272.1.69.29.1.13	ColumnrcCfmPmHistoryInterval	read-create	current	History summary interval in minutes
1.3.6.1.4.1.2272.1.69.29.1.14	ColumnrcCfmPmSampleRate	read-create	current	Sample rate once per sample interval specified in seconds
1.3.6.1.4.1.2272.1.69.32	TablercCfmLtrTable	not-accessible	current	This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message.
1.3.6.1.4.1.2272.1.69.32.1	RowrcCfmLtrEntry	not-accessible	current	The Linktrace Reply table entry.
1.3.6.1.4.1.2272.1.69.32.1.1	ColumnrcCfmLtrDomainIndex	not-accessible	current	Maintenance Domain Index
1.3.6.1.4.1.2272.1.69.32.1.2	ColumnrcCfmLtrAssociationIndex	not-accessible	current	Maintenance Association Index
1.3.6.1.4.1.2272.1.69.32.1.3	ColumnrcCfmLtrMepId	not-accessible	current	Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.32.1.4	ColumnrcCfmLtrSeqNumber	not-accessible	current	The transaction identifier/sequence number returned by a previous transmit linkrace message command, indicating which LTM's response is going to be returned.
1.3.6.1.4.1.2272.1.69.32.1.5	ColumnrcCfmLtrTtl	not-accessible	current	Ttl field value for a returned LTR.
1.3.6.1.4.1.2272.1.69.32.1.6	ColumnrcCfmLtrReceiveOrder	not-accessible	current	An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that…
1.3.6.1.4.1.2272.1.69.32.1.7	ColumnrcCfmLtrDomainName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.32.1.8	ColumnrcCfmLtrAssociationName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.32.1.9	ColumnrcCfmLtrForwarded	read-only	current	Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field.
1.3.6.1.4.1.2272.1.69.32.1.10	ColumnrcCfmLtrTerminalMep	read-only	current	A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field.
1.3.6.1.4.1.2272.1.69.32.1.11	ColumnrcCfmLtrLastEgressIdentifier	read-only	current	An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace…
1.3.6.1.4.1.2272.1.69.32.1.12	ColumnrcCfmLtrNextEgressIdentifier	read-only	current	An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Res…
1.3.6.1.4.1.2272.1.69.32.1.13	ColumnrcCfmLtrRelayAction	read-only	current	Value returned in the Relay Action field.
1.3.6.1.4.1.2272.1.69.32.1.14	ColumnrcCfmLtrSrcMac	read-only	current	Mac address of the MP that respond to the LTM request for this LTR
1.3.6.1.4.1.2272.1.69.32.1.15	ColumnrcCfmLtrIngressAction	read-only	current	The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM.
1.3.6.1.4.1.2272.1.69.32.1.16	ColumnrcCfmLtrIngressMac	read-only	current	Mac address returned in the ingress MAC address field. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are meani…
1.3.6.1.4.1.2272.1.69.32.1.17	ColumnrcCfmLtrIngressPortIdSubtype	read-only	current	Format of the Ingress Port ID. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless.
1.3.6.1.4.1.2272.1.69.32.1.18	ColumnrcCfmLtrIngressPortId	read-only	current	Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrIngressPortIdSubtype object. If the rcCfmLtrIngress object contains the va…
1.3.6.1.4.1.2272.1.69.32.1.19	ColumnrcCfmLtrEgressAction	read-only	current	The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM.
1.3.6.1.4.1.2272.1.69.32.1.20	ColumnrcCfmLtrEgressMac	read-only	current	Mac address returned in the egress MAC address field. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meaning…
1.3.6.1.4.1.2272.1.69.32.1.21	ColumnrcCfmLtrEgressPortIdSubtype	read-only	current	Format of the Egress Port ID. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless.
1.3.6.1.4.1.2272.1.69.32.1.22	ColumnrcCfmLtrEgressPortId	read-only	current	Egress Port ID. The format of this object is determined by the value of the rcCfmLtrEgressPortIdSubtype object. If the rcCfmLtrEgress object contains the value…
1.3.6.1.4.1.2272.1.69.33	TablercCfmLtrReplyTable	not-accessible	current	This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message.
1.3.6.1.4.1.2272.1.69.33.1	RowrcCfmLtrReplyEntry	not-accessible	current	The Linktrace Reply table entry.
1.3.6.1.4.1.2272.1.69.33.1.1	ColumnrcCfmLtrReplyDomainIndex	not-accessible	current	Maintenance Domain Index
1.3.6.1.4.1.2272.1.69.33.1.2	ColumnrcCfmLtrReplyAssociationIndex	not-accessible	current	Maintenance Association Index
1.3.6.1.4.1.2272.1.69.33.1.3	ColumnrcCfmLtrReplyMepId	not-accessible	current	Maintenance EndPoint ID
1.3.6.1.4.1.2272.1.69.33.1.4	ColumnrcCfmLtrReplySeqNumber	not-accessible	current	The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned.
1.3.6.1.4.1.2272.1.69.33.1.5	ColumnrcCfmLtrReplyHop	not-accessible	current	The number of hops away from LTM initiator
1.3.6.1.4.1.2272.1.69.33.1.6	ColumnrcCfmLtrReplyReceiveOrder	not-accessible	current	An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that…
1.3.6.1.4.1.2272.1.69.33.1.7	ColumnrcCfmLtrReplyTtl	read-only	current	Ttl field value for a returned LTR.
1.3.6.1.4.1.2272.1.69.33.1.8	ColumnrcCfmLtrReplyDomainName	read-only	current	Maintenance Domain Name
1.3.6.1.4.1.2272.1.69.33.1.9	ColumnrcCfmLtrReplyAssociationName	read-only	current	Maintenance Association Name
1.3.6.1.4.1.2272.1.69.33.1.10	ColumnrcCfmLtrReplyForwarded	read-only	current	Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field.
1.3.6.1.4.1.2272.1.69.33.1.11	ColumnrcCfmLtrReplyTerminalMep	read-only	current	A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field.
1.3.6.1.4.1.2272.1.69.33.1.12	ColumnrcCfmLtrReplyLastEgressIdentifier	read-only	current	An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace…
1.3.6.1.4.1.2272.1.69.33.1.13	ColumnrcCfmLtrReplyNextEgressIdentifier	read-only	current	An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Res…
1.3.6.1.4.1.2272.1.69.33.1.14	ColumnrcCfmLtrReplyRelayAction	read-only	current	Value returned in the Relay Action field.
1.3.6.1.4.1.2272.1.69.33.1.15	ColumnrcCfmLtrReplySrcMac	read-only	current	Mac address of the MP that respond to the LTM request for this LTR
1.3.6.1.4.1.2272.1.69.33.1.16	ColumnrcCfmLtrReplyIngressAction	read-only	current	The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM.
1.3.6.1.4.1.2272.1.69.33.1.17	ColumnrcCfmLtrReplyIngressMac	read-only	current	Mac address returned in the ingress MAC address field. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are …
1.3.6.1.4.1.2272.1.69.33.1.18	ColumnrcCfmLtrReplyIngressPortIdSubtype	read-only	current	Format of the Ingress Port ID. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless.
1.3.6.1.4.1.2272.1.69.33.1.19	ColumnrcCfmLtrReplyIngressPortId	read-only	current	Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyIngressPortIdSubtype object. If the rcCfmLtrReplyIngress object conta…
1.3.6.1.4.1.2272.1.69.33.1.20	ColumnrcCfmLtrReplyEgressAction	read-only	current	The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM.
1.3.6.1.4.1.2272.1.69.33.1.21	ColumnrcCfmLtrReplyEgressMac	read-only	current	Mac address returned in the egress MAC address field. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are me…
1.3.6.1.4.1.2272.1.69.33.1.22	ColumnrcCfmLtrReplyEgressPortIdSubtype	read-only	current	Format of the Egress Port ID. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless.
1.3.6.1.4.1.2272.1.69.33.1.23	ColumnrcCfmLtrReplyEgressPortId	read-only	current	Egress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyEgressPortIdSubtype object. If the rcCfmLtrReplyEgress object contains…
1.3.6.1.4.1.2272.1.69.34	TablercCfmTransmitL2PingTable	not-accessible	current	Connectivity Fault Management transmit L2Ping table
1.3.6.1.4.1.2272.1.69.34.1	RowrcCfmTransmitL2PingEntry	not-accessible	current	Connectivity Fault Management Maintenance EndPoint L2Ping entry.
1.3.6.1.4.1.2272.1.69.34.1.1	ColumnrcCfmTransmitL2PingVlanId	not-accessible	current	A value that uniquely identifies the Customer Vlan
1.3.6.1.4.1.2272.1.69.34.1.2	ColumnrcCfmTransmitL2PingDestMacAddress	read-write	current	An indication of the target MAC Address field to be transmitted
1.3.6.1.4.1.2272.1.69.34.1.3	ColumnrcCfmTransmitL2PingHostName	read-write	current	The target host name
1.3.6.1.4.1.2272.1.69.34.1.4	ColumnrcCfmTransmitL2PingDestIsHostName	read-write	current	True indicates that the host name is used for L2Ping transmission
1.3.6.1.4.1.2272.1.69.34.1.5	ColumnrcCfmTransmitL2PingMessages	read-write	current	The number of L2Ping messages to be transmitted.
1.3.6.1.4.1.2272.1.69.34.1.6	ColumnrcCfmTransmitL2PingPriority	read-write	current	Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame.
1.3.6.1.4.1.2272.1.69.34.1.7	ColumnrcCfmTransmitL2PingTimeoutInt	read-write	current	The interval to wait for an L2Ping time-out with a range of (1..10) seconds with a default value of 3 seconds.
1.3.6.1.4.1.2272.1.69.34.1.8	ColumnrcCfmTransmitL2PingTestPattern	read-write	current	The test pattern to use in the L2Ping PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a de…
1.3.6.1.4.1.2272.1.69.34.1.9	ColumnrcCfmTransmitL2PingDataSize	read-write	current	An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent.
1.3.6.1.4.1.2272.1.69.34.1.10	ColumnrcCfmTransmitL2PingFrameSize	read-write	current	If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV.
1.3.6.1.4.1.2272.1.69.34.1.11	ColumnrcCfmTransmitL2PingSourceMode	read-write	current	Source modes of the transmit loopback service.
1.3.6.1.4.1.2272.1.69.34.1.12	ColumnrcCfmTransmitL2PingSeqNumber	read-only	current	The transaction identifier/sequence number of the first loopback message (to be) sent.
1.3.6.1.4.1.2272.1.69.34.1.13	ColumnrcCfmTransmitL2PingResultOk	read-only	current	Indicates the result of the operation: -true. The L2Ping Message(s) will be (or have been) sent. -false. The L2Ping Message(s) will not be sent.
1.3.6.1.4.1.2272.1.69.34.1.14	ColumnrcCfmTransmitL2PingStatus	read-write	current	Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Ping messages. -…
1.3.6.1.4.1.2272.1.69.34.1.15	ColumnrcCfmTransmitL2PingResult	read-only	current	Display the L2Ping result.
1.3.6.1.4.1.2272.1.69.35	TablercCfmTransmitL2TraceTable	not-accessible	current	Connectivity Fault Management transmit L2Trace table
1.3.6.1.4.1.2272.1.69.35.1	RowrcCfmTransmitL2TraceEntry	not-accessible	current	Connectivity Fault Management Maintenance EndPoint L2Trace entry.
1.3.6.1.4.1.2272.1.69.35.1.1	ColumnrcCfmTransmitL2TraceVlanId	not-accessible	current	A value that uniquely identifies the Customer Vlan
1.3.6.1.4.1.2272.1.69.35.1.2	ColumnrcCfmTransmitL2TracePriority	read-write	current	Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame.
1.3.6.1.4.1.2272.1.69.35.1.3	ColumnrcCfmTransmitL2TraceDestMacAddress	read-write	current	An indication of the target MAC Address field to be transmitted
1.3.6.1.4.1.2272.1.69.35.1.4	ColumnrcCfmTransmitL2TraceHostName	read-write	current	The target host name
1.3.6.1.4.1.2272.1.69.35.1.5	ColumnrcCfmTransmitL2TraceIsid	read-write	current	Isid Id
1.3.6.1.4.1.2272.1.69.35.1.6	ColumnrcCfmTransmitL2TraceNickName	read-only	current	Local Node nick name
1.3.6.1.4.1.2272.1.69.35.1.7	ColumnrcCfmTransmitL2TraceDestIsHostName	read-write	current	True indicates that the host name is used for L2Trace transmission
1.3.6.1.4.1.2272.1.69.35.1.8	ColumnrcCfmTransmitL2TraceIsidTree	read-write	current	True indicates that the multicast tree will be traced. False indicates that the unicast path will be traced
1.3.6.1.4.1.2272.1.69.35.1.9	ColumnrcCfmTransmitL2TraceTtl	read-write	current	The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 …
1.3.6.1.4.1.2272.1.69.35.1.10	ColumnrcCfmTransmitL2TraceSourceMode	read-write	current	Source modes of the transmit loopback service.
1.3.6.1.4.1.2272.1.69.35.1.11	ColumnrcCfmTransmitL2TraceSeqNumber	read-only	current	The transaction identifier/sequence number of the first loopback message (to be) sent.
1.3.6.1.4.1.2272.1.69.35.1.12	ColumnrcCfmTransmitL2TraceResultOk	read-only	current	Indicates the result of the operation: -true. The L2Trace Message(s) will be (or have been) sent. -false. The L2Trace Message(s) will not be sent.
1.3.6.1.4.1.2272.1.69.35.1.13	ColumnrcCfmTransmitL2TraceStatus	read-write	current	Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. …
1.3.6.1.4.1.2272.1.69.35.1.14	ColumnrcCfmTransmitL2TraceFlag	read-only	current	L2Trace result flag indicating L2Trace status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Inv…
1.3.6.1.4.1.2272.1.69.36	TablercCfmL2TraceReplyTable	not-accessible	current	This table contains a list of l2trace replies received by a specific MEP in response to a linktrace message.
1.3.6.1.4.1.2272.1.69.36.1	RowrcCfmL2TraceReplyEntry	not-accessible	current	The Linktrace Reply table entry.
1.3.6.1.4.1.2272.1.69.36.1.1	ColumnrcCfmL2TraceReplyVlanId	not-accessible	current	A value that uniquely identifies the Customer Vlan
1.3.6.1.4.1.2272.1.69.36.1.2	ColumnrcCfmL2TraceReplySeqNumber	not-accessible	current	The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which L2Trace's response is going to be return…
1.3.6.1.4.1.2272.1.69.36.1.3	ColumnrcCfmL2TraceReplyHop	not-accessible	current	The number of hops away from L2Trace initiator.
1.3.6.1.4.1.2272.1.69.36.1.4	ColumnrcCfmL2TraceReplyReceiveOrder	not-accessible	current	An index to distinguish among multiple L2Trace responses with the same Transaction Identifier field value. This value is assigned sequentially from 1, in the o…
1.3.6.1.4.1.2272.1.69.36.1.5	ColumnrcCfmL2TraceReplyTtl	read-only	current	Ttl field value for a returned L2Trace response.
1.3.6.1.4.1.2272.1.69.36.1.6	ColumnrcCfmL2TraceReplySrcMac	read-only	current	Mac address of the MP that respond to the L2Trace request for this L2traceReply
1.3.6.1.4.1.2272.1.69.36.1.7	ColumnrcCfmL2TraceReplyHostName	read-only	current	The host name of the replying node
1.3.6.1.4.1.2272.1.69.36.1.8	ColumnrcCfmL2TraceReplyLastSrcMac	read-only	current	The MAC address of the node that forwarded the L2Trace to the responding node
1.3.6.1.4.1.2272.1.69.36.1.9	ColumnrcCfmL2TraceReplyLastHostName	read-only	current	The host name of the node that forwarded the L2Trace to the responding node
1.3.6.1.4.1.2272.1.69.37	TablercCfmTransmitL2IpPingTable	not-accessible	current	Connectivity Fault Management transmit L2IpPing table
1.3.6.1.4.1.2272.1.69.37.1	RowrcCfmTransmitL2IpPingEntry	not-accessible	current	L2IpPing entry.
1.3.6.1.4.1.2272.1.69.37.1.1	ColumnrcCfmTransmitL2IpPingIpAddrType	not-accessible	current	The address type of destination IP Address
1.3.6.1.4.1.2272.1.69.37.1.2	ColumnrcCfmTransmitL2IpPingIpAddr	not-accessible	current	Destination IP Address. Support ipv4 at this time
1.3.6.1.4.1.2272.1.69.37.1.3	ColumnrcCfmTransmitL2IpPingVrfId	read-only	current	VRF ID
1.3.6.1.4.1.2272.1.69.37.1.4	ColumnrcCfmTransmitL2IpPingVrfName	read-only	current	The Name of the Virtual Router
1.3.6.1.4.1.2272.1.69.37.1.5	ColumnrcCfmTransmitL2IpPingMessages	read-create	current	The number of L2IpPing messages to be transmitted per mac/vlan pair.
1.3.6.1.4.1.2272.1.69.37.1.6	ColumnrcCfmTransmitL2IpPingTimeoutInt	read-create	current	The interval to wait for an L2IpPing time-out with a range of (1..10) seconds with a default value of 3 seconds.
1.3.6.1.4.1.2272.1.69.37.1.7	ColumnrcCfmTransmitL2IpPingTestPattern	read-create	current	The test pattern to use in the L2IpPing PDUs with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a…
1.3.6.1.4.1.2272.1.69.37.1.8	ColumnrcCfmTransmitL2IpPingDataSize	read-create	current	An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent.
1.3.6.1.4.1.2272.1.69.37.1.9	ColumnrcCfmTransmitL2IpPingStatus	read-create	current	Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2IpPing messages.…
1.3.6.1.4.1.2272.1.69.37.1.10	ColumnrcCfmTransmitL2IpPingResultOk	read-only	current	Indicates the result of the operation: -true. L2IpPing Message(s) will be/have been sent. -false. L2IpPing Message(s) will not be sent.
1.3.6.1.4.1.2272.1.69.37.1.11	ColumnrcCfmTransmitL2IpPingPathsFound	read-only	current	The number of paths found to execute l2ping command
1.3.6.1.4.1.2272.1.69.37.1.12	ColumnrcCfmTransmitL2IpPingRowStatus	read-create	current	Used to create/delete entries in the rcCfmTransmitL2IpPingTable. Deletion of an entry in this table results in corresponding rcCfmL2IpPingReplyTable entries be…
1.3.6.1.4.1.2272.1.69.38	TablercCfmL2IpPingReplyTable	not-accessible	current	This table contains a list of l2 ip ping replies received
1.3.6.1.4.1.2272.1.69.38.1	RowrcCfmL2IpPingReplyEntry	not-accessible	current	The L2 Ip Ping Reply table entry.
1.3.6.1.4.1.2272.1.69.38.1.1	ColumnrcCfmL2IpPingReplyIpAddrType	not-accessible	current	The address type of destination IP Address
1.3.6.1.4.1.2272.1.69.38.1.2	ColumnrcCfmL2IpPingReplyIpAddr	not-accessible	current	Destination IP Address. Support ipv4 at this time
1.3.6.1.4.1.2272.1.69.38.1.3	ColumnrcCfmL2IpPingReplySendOrder	not-accessible	current	An index to distinguish among multiple L2Ping sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to t…
1.3.6.1.4.1.2272.1.69.38.1.4	ColumnrcCfmL2IpPingReplyVrfId	read-only	current	VRF ID
1.3.6.1.4.1.2272.1.69.38.1.5	ColumnrcCfmL2IpPingReplyVlanId	read-only	current	Vlan found from L3 lookup and used for transmission
1.3.6.1.4.1.2272.1.69.38.1.6	ColumnrcCfmL2IpPingReplyDestMacAddress	read-only	current	An indication of the target MAC Address transmitted
1.3.6.1.4.1.2272.1.69.38.1.7	ColumnrcCfmL2IpPingReplyPortNum	read-only	current	Either the value '0', or the port number of the port used for the l2ping.
1.3.6.1.4.1.2272.1.69.38.1.8	ColumnrcCfmL2IpPingReplyDestHostName	read-only	current	The host name of the responding node
1.3.6.1.4.1.2272.1.69.38.1.9	ColumnrcCfmL2IpPingReplySize	read-only	current	The number of bytes of data sent
1.3.6.1.4.1.2272.1.69.38.1.10	ColumnrcCfmL2IpPingReplyPktsTx	read-only	current	Number of Packets transmitted for this vlan/mac
1.3.6.1.4.1.2272.1.69.38.1.11	ColumnrcCfmL2IpPingReplyPktsRx	read-only	current	Number of Packets received for this vlan/mac
1.3.6.1.4.1.2272.1.69.38.1.12	ColumnrcCfmL2IpPingReplyPercentLossWhole	read-only	current	Percentage of packet loss for this vlan/mac
1.3.6.1.4.1.2272.1.69.38.1.13	ColumnrcCfmL2IpPingReplyPercentLossFract	read-only	current	Percentage of packet loss for this vlan/mac
1.3.6.1.4.1.2272.1.69.38.1.14	ColumnrcCfmL2IpPingReplyMinRoundTrip	read-only	current	Min time for round-trip for this vlan/mac in us
1.3.6.1.4.1.2272.1.69.38.1.15	ColumnrcCfmL2IpPingReplyMaxRoundTrip	read-only	current	Max time for round-trip for this vlan/mac in us
1.3.6.1.4.1.2272.1.69.38.1.16	ColumnrcCfmL2IpPingReplyRttAvgWhole	read-only	current	Average time for round-trip for this vlan/mac in us
1.3.6.1.4.1.2272.1.69.38.1.17	ColumnrcCfmL2IpPingReplyRttAvgFract	read-only	current	Fractional portion of Average time for round-trip
1.3.6.1.4.1.2272.1.69.38.1.18	ColumnrcCfmL2IpPingReplyFlag	read-only	current	Result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - Internal Error 3 - Invalid Ip 4 - L2Trace comp…
1.3.6.1.4.1.2272.1.69.39	TablercCfmTransmitL2IpTraceTable	not-accessible	current	Connectivity Fault Management transmit L2IpTrace table
1.3.6.1.4.1.2272.1.69.39.1	RowrcCfmTransmitL2IpTraceEntry	not-accessible	current	L2IpTrace entry.
1.3.6.1.4.1.2272.1.69.39.1.1	ColumnrcCfmTransmitL2IpTraceIpAddrType	not-accessible	current	The address type of destination IP Address
1.3.6.1.4.1.2272.1.69.39.1.2	ColumnrcCfmTransmitL2IpTraceIpAddr	not-accessible	current	Destination IP Address. Support ipv4 at this time
1.3.6.1.4.1.2272.1.69.39.1.3	ColumnrcCfmTransmitL2IpTraceVrfId	read-only	current	VRF ID
1.3.6.1.4.1.2272.1.69.39.1.4	ColumnrcCfmTransmitL2IpTraceVrfName	read-only	current	The Name of the Virtual Router
1.3.6.1.4.1.2272.1.69.39.1.5	ColumnrcCfmTransmitL2IpTraceTtl	read-create	current	The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 …
1.3.6.1.4.1.2272.1.69.39.1.6	ColumnrcCfmTransmitL2IpTraceStatus	read-create	current	Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. …
1.3.6.1.4.1.2272.1.69.39.1.7	ColumnrcCfmTransmitL2IpTraceResultOk	read-only	current	Indicates the result of the operation: -true. The Trace Message(s) will be/have been sent. -false. The Trace Message(s) will not be sent.
1.3.6.1.4.1.2272.1.69.39.1.8	ColumnrcCfmTransmitL2IpTracePathsFound	read-only	current	The number of paths found to execute l2trace command
1.3.6.1.4.1.2272.1.69.39.1.9	ColumnrcCfmTransmitL2IpTraceRowStatus	read-create	current	Used to create/delete entries in the rcCfmTransmitL2IpTraceTable. Deletion of an entry in this table results in corresponding rcCfmL2IpTraceReplyTable entries …
1.3.6.1.4.1.2272.1.69.40	TablercCfmL2IpTraceReplyTable	not-accessible	current	This table contains a list of l2 ip trace replies received by a specific MEP in response to a linktrace message.
1.3.6.1.4.1.2272.1.69.40.1	RowrcCfmL2IpTraceReplyEntry	not-accessible	current	The L2 Ip Trace Reply table entry.
1.3.6.1.4.1.2272.1.69.40.1.1	ColumnrcCfmL2IpTraceReplyIpAddrType	not-accessible	current	The address type of destination IP Address
1.3.6.1.4.1.2272.1.69.40.1.2	ColumnrcCfmL2IpTraceReplyIpAddr	not-accessible	current	Destination IP Address. Support ipv4 at this time
1.3.6.1.4.1.2272.1.69.40.1.3	ColumnrcCfmL2IpTraceReplySendOrder	not-accessible	current	An index to distinguish among multiple L2Trace sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to …
1.3.6.1.4.1.2272.1.69.40.1.4	ColumnrcCfmL2IpTraceReplyHop	not-accessible	current	The number of L2 hops away from L2Trace initiator.
1.3.6.1.4.1.2272.1.69.40.1.5	ColumnrcCfmL2IpTraceReplyReceiveOrder	not-accessible	current	An index to distinguish among multiple L2Trace responses with the same Send Transaction Identifier field value. This value is assigned sequentially from 1, in …
1.3.6.1.4.1.2272.1.69.40.1.6	ColumnrcCfmL2IpTraceReplyTtl	read-only	current	Ttl field value for a returned L2Trace response.
1.3.6.1.4.1.2272.1.69.40.1.7	ColumnrcCfmL2IpTraceReplyVrfId	read-only	current	VRF ID
1.3.6.1.4.1.2272.1.69.40.1.8	ColumnrcCfmL2IpTraceReplyVlanId	read-only	current	Vlan found from L3 lookup and used for transmission
1.3.6.1.4.1.2272.1.69.40.1.9	ColumnrcCfmL2IpTraceReplyDestMacAddress	read-only	current	An indication of the target MAC Address transmitted
1.3.6.1.4.1.2272.1.69.40.1.10	ColumnrcCfmL2IpTraceReplySeqNumber	read-only	current	The transaction identifier/sequence number used in linktrace message packet
1.3.6.1.4.1.2272.1.69.40.1.11	ColumnrcCfmL2IpTraceReplyPortNum	read-only	current	Either the value '0', or the port number of the port used for the l2trace.
1.3.6.1.4.1.2272.1.69.40.1.12	ColumnrcCfmL2IpTraceReplySrcMac	read-only	current	Mac address of the MP that responded to L2Trace request for this L2traceReply
1.3.6.1.4.1.2272.1.69.40.1.13	ColumnrcCfmL2IpTraceReplyHostName	read-only	current	The host name of the replying node
1.3.6.1.4.1.2272.1.69.40.1.14	ColumnrcCfmL2IpTraceReplyLastSrcMac	read-only	current	The MAC address of the node that forwarded the L2Trace to the responding node
1.3.6.1.4.1.2272.1.69.40.1.15	ColumnrcCfmL2IpTraceReplyLastHostName	read-only	current	The host name of the node that forwarded the L2Trace to the responding node
1.3.6.1.4.1.2272.1.69.40.1.16	ColumnrcCfmL2IpTraceReplyFlag	read-only	current	L2Trace result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Invalid Mac…
1.3.6.1.4.1.2272.1.69.41	TablercCfmTransmitL2McastTraceTable	not-accessible	current	This table contains a list of l2 multicast route trace requests.
1.3.6.1.4.1.2272.1.69.41.1	RowrcCfmTransmitL2McastTraceEntry	not-accessible	current	CFM Transmit L2 Multicast Trace Entry.
1.3.6.1.4.1.2272.1.69.41.1.1	ColumnrcCfmTransmitL2McastTraceSrcIpAddrType	not-accessible	current	The address type of Source IP Address
1.3.6.1.4.1.2272.1.69.41.1.2	ColumnrcCfmTransmitL2McastTraceSrcIpAddr	not-accessible	current	Source IP Address. Support ipv4 at this time
1.3.6.1.4.1.2272.1.69.41.1.3	ColumnrcCfmTransmitL2McastTraceGroupIpAddrType	not-accessible	current	The address type of Multicast Group IP Address
1.3.6.1.4.1.2272.1.69.41.1.4	ColumnrcCfmTransmitL2McastTraceGroupIpAddr	not-accessible	current	Multicast Group IP Address. Support ipv4 at this time
1.3.6.1.4.1.2272.1.69.41.1.5	ColumnrcCfmTransmitL2McastTraceServiceType	not-accessible	current	Service type indicates what value of service id means. vlan - indicates value maps to VLAN vrfid - indicates value maps to a VRF Id
1.3.6.1.4.1.2272.1.69.41.1.6	ColumnrcCfmTransmitL2McastTraceServiceId	not-accessible	current	Value of VLAN or VRF-Id. Meaning controlled by rcCfmTransmitL2McastTraceServiceType. Value must be valid for type (e.g. VLAN range 1..4094)
1.3.6.1.4.1.2272.1.69.41.1.7	ColumnrcCfmTransmitL2McastTraceVrfName	read-only	current	The name of the Virtual Router of the originator
1.3.6.1.4.1.2272.1.69.41.1.8	ColumnrcCfmTransmitL2McastTraceRowStatus	read-create	current	Used to create/delete entries in the rcCfmTransmitL2McastTraceTable. Deletion of an entry in this table results in a corresponding rcCfmL2McastTraceReplyTable …
1.3.6.1.4.1.2272.1.69.41.1.9	ColumnrcCfmTransmitL2McastTracePriority	read-create	current	Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame.
1.3.6.1.4.1.2272.1.69.41.1.10	ColumnrcCfmTransmitL2McastTraceTtl	read-create	current	The number of hops remaining to this trace. Decremented by 1 by each Bridge that handles trace. If 0 on output, the trace is not transmitted to the next hop. T…
1.3.6.1.4.1.2272.1.69.41.1.11	ColumnrcCfmTransmitL2McastTraceSeqNumber	read-only	current	The transaction identifier/sequence number of the first message (to be) sent.
1.3.6.1.4.1.2272.1.69.41.1.12	ColumnrcCfmTransmitL2McastTraceStatus	read-create	current	Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit the trace messages. -ab…
1.3.6.1.4.1.2272.1.69.41.1.13	ColumnrcCfmTransmitL2McastTraceResultOk	read-only	current	Indicates the result of the operation: -true. The Trace Message(s) will/have been sent. -false. The Trace Message(s) will not be sent.
1.3.6.1.4.1.2272.1.69.41.1.14	ColumnrcCfmTransmitL2McastTraceFlag	read-only	current	Result flag indicating L2Trace status or error code. Each enum value represents a status or error case. 1 - No error 2 - Internal Error 3 - Mep must be enabled…
1.3.6.1.4.1.2272.1.69.42	TablercCfmL2McastTraceReplyTable	not-accessible	current	This table contains a list of multicast route trace replies received by a specific MEP in response to a trace message.
1.3.6.1.4.1.2272.1.69.42.1	RowrcCfmL2McastTraceReplyEntry	not-accessible	current	The L2 Multicast Trace Reply Table Entry
1.3.6.1.4.1.2272.1.69.42.1.1	ColumnrcCfmL2McastTraceReplySrcIpAddrType	not-accessible	current	The address type of Source IP Address
1.3.6.1.4.1.2272.1.69.42.1.2	ColumnrcCfmL2McastTraceReplySrcIpAddr	not-accessible	current	Source IP Address. Support ipv4 at this time
1.3.6.1.4.1.2272.1.69.42.1.3	ColumnrcCfmL2McastTraceReplyGroupIpAddrType	not-accessible	current	The address type of Multicast Group IP Address
1.3.6.1.4.1.2272.1.69.42.1.4	ColumnrcCfmL2McastTraceReplyGroupIpAddr	not-accessible	current	Multicast Group IP Address. Support ipv4 at this time
1.3.6.1.4.1.2272.1.69.42.1.5	ColumnrcCfmL2McastTraceReplyServiceType	not-accessible	current	Service type indicates what value of service id means. vlan - indicates value maps to VLAN vrfid - indicates value maps to a VRF Id
1.3.6.1.4.1.2272.1.69.42.1.6	ColumnrcCfmL2McastTraceReplyServiceId	not-accessible	current	Value of VLAN or VRF-Id. Meaning controlled by rcCfmL2McastTraceReplyServiceType. Value must be valid for type (e.g. VLAN range 1..4094)
1.3.6.1.4.1.2272.1.69.42.1.7	ColumnrcCfmL2McastTraceReplyHop	not-accessible	current	The number of hops away from trace initiator
1.3.6.1.4.1.2272.1.69.42.1.8	ColumnrcCfmL2McastTraceReplyReceiveOrder	not-accessible	current	An index to distinguish among multiple responses with the same Transaction Identifier field value. This value is assigned sequentially from 1, in the order tha…
1.3.6.1.4.1.2272.1.69.42.1.9	ColumnrcCfmL2McastTraceReplyTtl	read-only	current	Ttl field value for a returned trace response.
1.3.6.1.4.1.2272.1.69.42.1.10	ColumnrcCfmL2McastTraceReplyVrfName	read-only	current	The name of the Virtual Router of the originator
1.3.6.1.4.1.2272.1.69.42.1.11	ColumnrcCfmL2McastTraceReplySrcMac	read-only	current	Mac address of the MP that respond to the trace request
1.3.6.1.4.1.2272.1.69.42.1.12	ColumnrcCfmL2McastTraceReplyHostName	read-only	current	The host name of the replying node
1.3.6.1.4.1.2272.1.69.42.1.13	ColumnrcCfmL2McastTraceReplyLastSrcMac	read-only	current	The MAC address of the node that forwarded the trace to the responding node
1.3.6.1.4.1.2272.1.69.42.1.14	ColumnrcCfmL2McastTraceReplyLastHostName	read-only	current	The host name of the node that forwarded the trace to the responding node
1.3.6.1.4.1.2272.1.69.42.1.15	ColumnrcCfmL2McastTraceReplySpbmVlanId	read-only	current	The SPBM VLAN id used for the trace
1.3.6.1.4.1.2272.1.69.42.1.16	ColumnrcCfmL2McastTraceReplyBMac	read-only	current	The multicast MAC address for the group
1.3.6.1.4.1.2272.1.69.42.1.17	ColumnrcCfmL2McastTraceReplyIsid	read-only	current	Isid id for the group

Type Definitions

Name	Syntax	Status	Description
CfmEgressActionFieldValue	INTEGER { egrOk (1), egrDown (2), egrBlocked (3), egrVid (4), egrNoTlv (5) }	current	Possible values returned in the egress action field
CfmIngressActionFieldValue	INTEGER { ingOk (1), ingDown (2), ingBlocked (3), ingVid (4), ingNoTlv (5) }	current	Possible values returned in the ingress action field.
CfmRelayActionFieldValue	INTEGER { rlyHit (1), rlyFdb (2), rlyMpdb (3), unknown (4) }	current	Possible values the Relay action field can take.
LldpPortId	OCTET STRING (SIZE (1..255))	current	This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If th…
LldpPortIdSubtype	INTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) }	current	This TC describes the source of a particular type of Port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The …
RcCfmPmOperState	INTEGER { rPmUp (1), rPmDown (2), rPmError (3), rPmSync (4) }	current	Operational state of the Performance Montitor form mep-rmep pair
RcCfmRemoteMepState	INTEGER { rMepIdle (1), rMepStart (2), rMepFailed (3), rMepOk (4) }	current	Operational state of the remote MEP state machine

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

RC-CFM-MIB

Bulk Translate

Search Vendor MIBs

Search Vendor Traps