RC-IP-MIB
414 objects
Enterprise MIB for the Accelar product family.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.8.0 | IdentityrcIpMib | of | Enterprise MIB for the Accelar product family. | |
| 1.3.6.1.4.1.2272.1.8.1 | NodercIpConf | |||
| 1.3.6.1.4.1.2272.1.8.1.1 | TablercIpConfTable | not-accessible | current | A table used to maintain IP routing information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1 | RowrcIpConfEntry | not-accessible | current | Entry containing IP routing information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is co… |
| 1.3.6.1.4.1.2272.1.8.1.1.1.1 | ColumnrcIpConfIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.1.1.1.2 | ColumnrcIpConfAdvertDefRte | read-create | current | Used to indicate whether this interface should advertize a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.3 | ColumnrcIpConfAcceptDefRte | read-create | current | Used to indicate whether this interface should accept a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.4 | ColumnrcIpConfRowStatus | read-create | current | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.5 | ColumnrcIpConfRipEnable | read-create | current | Enable or disable RIP routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.6 | ColumnrcIpConfOspfEnable | read-create | current | Enable or disable OSPF routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.7 | ColumnrcIpConfIgmpEnable | read-create | current | Enable or disable IGMP on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.8 | ColumnrcIpConfAddrAssigned | read-only | current | Indicate whether IpAddress has been assigned for this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.9 | ColumnrcIpConfDhcpEnable | read-create | current | Enable or disable DHCP on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.10 | ColumnrcIpConfTriggeredUpdateEnable | read-create | current | Used to indicate whether the RIP triggered update feature should be enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.11 | ColumnrcIpConfAutoAggrerateEnable | read-create | current | Used to indicate whether the auto aggregation feature should be enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.12 | ColumnrcIpConfGenerateDefaultRoute | read-create | current | Used to indicate whether to generate a default RIP route on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.13 | ColumnrcIpConfAdvertiseWhenDown | read-create | current | The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used fo… |
| 1.3.6.1.4.1.2272.1.8.1.1.1.14 | ColumnrcIpConfDirectBroadcastEnable | read-create | current | Used to indicate whether this interface should forward direct broadcast traffic |
| 1.3.6.1.4.1.2272.1.8.1.1.1.15 | ColumnrcIpConfRipInPolicy | read-create | current | Used to indicate whether this interface should advertize a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.16 | ColumnrcIpConfRipOutPolicy | read-create | current | Used to indicate whether this interface should accept a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.17 | ColumnrcIpConfOspfIfType | read-create | current | OSPF Interface Type. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.18 | ColumnrcIpConfRipCost | read-create | current | Used to indicate the rip cost for this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.19 | ColumnrcIpConfRipHolddown | read-create | current | Used to indicate the rip holddown timer for this interface |
| 1.3.6.1.4.1.2272.1.8.1.1.1.20 | ColumnrcIpConfRipTimeout | read-create | current | Used to indicate the rip timeout interval for this interface |
| 1.3.6.1.4.1.2272.1.8.1.1.1.21 | ColumnrcIpConfRsmltEnable | read-create | current | Used to enable Route Smlt feature. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.22 | ColumnrcIpConfReversePathCheckEnable | read-create | current | Used to indicate whether this interface should perform Reverse Path Check |
| 1.3.6.1.4.1.2272.1.8.1.1.1.23 | ColumnrcIpConfReversePathCheckMode | read-create | current | Reverse Path Checking mode. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.24 | ColumnrcIpConfIsisEnable | read-create | current | Enable/disable Isis on this IP interface |
| 1.3.6.1.4.1.2272.1.8.1.1.1.25 | ColumnrcIpConfBfdEnable | read-create | current | Enable or disable BFD on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.26 | ColumnrcIpConfIpVpnLiteEnable | read-create | current | Enable or disable ipvpn-lite capability on the specified circuitless ip interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.27 | ColumnrcIpConfSpbMulticastEnable | read-create | current | Enable or disable spb-multicast on this port |
| 1.3.6.1.4.1.2272.1.8.1.1.1.28 | ColumnrcIpConfSpbMulticastQuerierAddr | read-create | current | querier-addr for spb-multicast |
| 1.3.6.1.4.1.2272.1.8.1.1.1.29 | ColumnrcIpConfVrrpVersion | read-create | current | Set the VRRP version for IPv4 on the specified interface. It does not impact the use of IPv6 VRRPv3 |
| 1.3.6.1.4.1.2272.1.8.1.1.1.30 | ColumnrcIpConfPimGatewayEnable | read-create | current | Enable/disable PIM Gateway on this interface |
| 1.3.6.1.4.1.2272.1.8.1.1.1.31 | ColumnrcIpConfVrrpChkSumComputation | read-create | current | Set the IPv4 VRRPv3 checksum computation method on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.32 | ColumnrcIpConfIpsecEnable | read-write | current | Used to indicate whether IPSec is enabled or disabled on the interface |
| 1.3.6.1.4.1.2272.1.8.1.6 | NodercIpConfGlobal | |||
| 1.3.6.1.4.1.2272.1.8.1.6.1 | ScalarrcIpConfGlobalRipHoldDownTime | read-write | current | Used to set the system-wide RIP hold down time in seconds. |
| 1.3.6.1.4.1.2272.1.8.1.6.2 | ScalarrcIpConfGlobalIcmpNetUnreach | read-write | current | Used to set the icmp net unreach feature enable/disable. |
| 1.3.6.1.4.1.2272.1.8.1.6.3 | ScalarrcIpConfGlobalEcmpEnable | read-write | current | Used to set the ecmp enable/disable. |
| 1.3.6.1.4.1.2272.1.8.1.6.4 | ScalarrcIpConfGlobalEcmpMaxPath | read-write | current | Used to globally configure maximum ECMP paths number. |
| 1.3.6.1.4.1.2272.1.8.1.6.5 | ScalarrcIpConfGlobalAlternativeEnable | read-write | current | Used to globally configure alternative enable. |
| 1.3.6.1.4.1.2272.1.8.1.6.6 | ScalarrcIpConfGlobalRouteDiscoveryEnable | read-write | current | Enable/disable ICMP Route Discovery feature |
| 1.3.6.1.4.1.2272.1.8.1.6.8 | ScalarrcIpConfGlobalRipTimeOutInterval | read-write | current | Rip TimeOut Interval in seconds |
| 1.3.6.1.4.1.2272.1.8.1.6.9 | ScalarrcIpConfGlobalRipDefImportMetric | read-write | current | Rip def import metric |
| 1.3.6.1.4.1.2272.1.8.1.6.10 | ScalarrcIpConfGlobalEcmp1PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 1 ECMP path, irrespective of ecmp-max-path configuration |
| 1.3.6.1.4.1.2272.1.8.1.6.11 | ScalarrcIpConfGlobalEcmp2PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 2 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.12 | ScalarrcIpConfGlobalEcmp3PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 3 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.13 | ScalarrcIpConfGlobalEcmp4PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 4 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.14 | ScalarrcIpConfGlobalEcmpPathListApply | read-write | current | This is to apply any changes in ECMP path list configuration or in the prefix-lists configured to be used as path list |
| 1.3.6.1.4.1.2272.1.8.1.6.15 | ScalarrcIpConfGlobalIcmpRedirectMsg | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.1.6.16 | ScalarrcIpConfGlobalMulticastMacFloodingStatus | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.1.6.17 | ScalarrcIpConfGlobalArpThreshold | read-write | current | Defines the maximum number of outstanding arp request a switch can generate. |
| 1.3.6.1.4.1.2272.1.8.1.6.18 | ScalarrcIpConfGlobalAllowMoreSpecificNonLocalRouteEnable | read-write | current | Used to determine whether more specific non local routes will go into the routing table. |
| 1.3.6.1.4.1.2272.1.8.1.6.19 | ScalarrcIpConfGlobalUdpCheckSumEnable | read-write | current | Enable/disable UDP checksum calculation. |
| 1.3.6.1.4.1.2272.1.8.1.6.20 | ScalarrcIpConfGlobalSuperNetEnable | read-write | current | Used to globally enable Supernetting/ CIDR routing for IP |
| 1.3.6.1.4.1.2272.1.8.1.6.21 | ScalarrcIpConfGlobalEcmp5PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 5 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.22 | ScalarrcIpConfGlobalEcmp6PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 6 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.23 | ScalarrcIpConfGlobalEcmp7PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 7 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.24 | ScalarrcIpConfGlobalEcmp8PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 8 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.25 | ScalarrcIpConfGlobalGarpEnable | read-write | current | Used to set the gratuitous-arp enable/disable |
| 1.3.6.1.4.1.2272.1.8.1.6.26 | ScalarrcIpConfGlobalArpMcastMacFlooding | read-write | current | Enable/disable Ip Arp Multicast Mac Flooding feature. |
| 1.3.6.1.4.1.2272.1.8.1.6.27 | ScalarrcIpConfGlobalSourceRouteEnable | read-write | current | Used to globally enable/disable ip source routing feature. |
| 1.3.6.1.4.1.2272.1.8.1.6.28 | ScalarrcIpConfGlobalIcmpEchoBroadcastRequestEnable | read-write | current | Used to globally enable/disable ip icmp echo broadcast request feature. |
| 1.3.6.1.4.1.2272.1.8.1.8 | TablercIpConfV2Table | not-accessible | deprecated | A table used to maintain IP routing information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1 | RowrcIpConfV2Entry | not-accessible | deprecated | Entry containing IP routing information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is co… |
| 1.3.6.1.4.1.2272.1.8.1.8.1.1 | ColumnrcIpConfV2Index | read-only | deprecated | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.1.8.1.2 | ColumnrcIpConfV2Addr | read-only | deprecated | Ip interface address. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.3 | ColumnrcIpConfV2RowStatus | read-create | deprecated | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.4 | ColumnrcIpConfV2AdvertDefRte | read-create | deprecated | Used to indicate whether this interface should advertize a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.5 | ColumnrcIpConfV2AcceptDefRte | read-create | deprecated | Used to indicate whether this interface should accept a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.6 | ColumnrcIpConfV2RipEnable | read-create | deprecated | Enable or disable RIP routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.7 | ColumnrcIpConfV2OspfEnable | read-create | deprecated | Enable or disable OSPF routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.8 | ColumnrcIpConfV2IgmpEnable | read-create | deprecated | Enable or disable IGMP on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.9 | ColumnrcIpConfV2AddrAssigned | read-only | deprecated | Indicate whether IpAddress has been assigned for this interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.10 | ColumnrcIpConfV2TriggeredUpdateEnable | read-create | deprecated | Used to indicate whether the RIP triggered update feature should be enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.11 | ColumnrcIpConfV2RipAutoAggrerateEnable | read-create | deprecated | Used to indicate whether the auto aggregation feature should be enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.12 | ColumnrcIpConfV2RipGenerateDefaultRoute | read-create | deprecated | Used to indicate whether to generate a default RIP route on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.8.1.13 | ColumnrcIpConfV2AdvertiseWhenDown | read-create | deprecated | The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used fo… |
| 1.3.6.1.4.1.2272.1.8.1.11 | TablercIpConfRsmltTable | not-accessible | current | A table used to maintain OSPF summary route metric parameter for a particular Area range. |
| 1.3.6.1.4.1.2272.1.8.1.11.1 | RowrcIpConfRsmltEntry | not-accessible | current | Entry containing OSPF summary route metric parameter for a particular Area range. An entry is automatically created in this table when an area range is configu… |
| 1.3.6.1.4.1.2272.1.8.1.11.1.1 | ColumnrcIpConfRsmltIfIndex | read-only | current | Interface Index, this is an index of the table. |
| 1.3.6.1.4.1.2272.1.8.1.11.1.2 | ColumnrcIpConfRsmltHoldDownTimer | read-create | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.1.11.1.3 | ColumnrcIpConfRsmltHoldUpTimer | read-create | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.1.11.1.4 | ColumnrcIpConfRsmltRowStatus | read-create | current | Row Status. |
| 1.3.6.1.4.1.2272.1.8.1.12 | TablercIpConfBfdTable | not-accessible | current | BFD configuration table |
| 1.3.6.1.4.1.2272.1.8.1.12.1 | RowrcIpConfBfdEntry | not-accessible | current | Used to configure BFD on a particular interface. An entry is created automatically when the variable rcIpConfBfdEnable is set to TRUE. Once created this entry … |
| 1.3.6.1.4.1.2272.1.8.1.12.1.1 | ColumnrcIpConfBfdIfIndex | not-accessible | current | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| 1.3.6.1.4.1.2272.1.8.1.12.1.2 | ColumnrcIpConfBfdMinRxInterval | read-create | current | the min rx interval in milliseconds |
| 1.3.6.1.4.1.2272.1.8.1.12.1.3 | ColumnrcIpConfBfdTxInterval | read-create | current | the desired tx interval in milliseconds |
| 1.3.6.1.4.1.2272.1.8.1.12.1.4 | ColumnrcIpConfBfdMultiplier | read-create | current | the multiplier BFD wait before rx timeout |
| 1.3.6.1.4.1.2272.1.8.1.12.1.5 | ColumnrcIpConfBfdRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.1.12.1.6 | ColumnrcIpConfBfdHoldOffInterval | read-create | current | This object specifies the hold off timer interval, in seconds. 0 means that hold off timer is disabled. |
| 1.3.6.1.4.1.2272.1.8.1.12.1.7 | ColumnrcIpConfBfdStaticFlag | read-create | current | This object specifies the static-flag for bfd. When disabled, the static route will go down, when bfd is disabled |
| 1.3.6.1.4.1.2272.1.8.1.12.1.8 | ColumnrcIpConfBfdVrfId | read-create | current | Indicates the Virtual Router to which the IPv4 BFD instance belongs. |
| 1.3.6.1.4.1.2272.1.8.1.12.1.9 | ColumnrcIpConfBfdVrfName | read-only | current | The Name of the Virtual Router to which the IPv4 BFD instance belongs. |
| 1.3.6.1.4.1.2272.1.8.2 | TablercIpAddrTable | not-accessible | current | The table of addressing information relevant to this entity's IP addresses. This table is identical to the ipAddrTable in MIB2 except the columns rcIpAdEntIfIn… |
| 1.3.6.1.4.1.2272.1.8.2.1 | RowrcIpAddrEntry | not-accessible | current | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.2272.1.8.2.1.1 | ColumnrcIpAdEntIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.8.2.1.2 | ColumnrcIpAdEntAddr | read-only | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.2272.1.8.2.1.3 | ColumnrcIpAdEntNetMask | read-write | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.2272.1.8.2.1.4 | ColumnrcIpAdEntBcastAddrFormat | read-only | current | The IP broadcast address format used on this interface. |
| 1.3.6.1.4.1.2272.1.8.2.1.5 | ColumnrcIpAdEntReasmMaxSize | read-only | current | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.2272.1.8.2.1.6 | ColumnrcIpAdEntRowStatus | read-write | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.2.1.7 | ColumnrcIpAdEntVlanId | read-write | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.8.2.1.8 | ColumnrcIpAdEntBrouterPort | read-only | current | Used to indicate whether this entry correponds to a brouter port (as oppose to a routable VLAN). This value cannot be changed after the row is created. |
| 1.3.6.1.4.1.2272.1.8.2.1.9 | ColumnrcIpAdEntMacOffset | read-write | current | Used to translate the ip address into mac address. The system has 512 mac addresses of which 0-507 are reserved for Boardwalk box. 508-511 is reserved for MG. … |
| 1.3.6.1.4.1.2272.1.8.2.1.10 | ColumnrcIpAdEntIfType | read-only | current | The address entry IfType indicates the type of the interface. In the case of circuit-less-IP there is no association with any ports. In other words, it can be … |
| 1.3.6.1.4.1.2272.1.8.2.1.11 | ColumnrcIpAdEntSecondaryIf | read-write | current | Used to indicate whether this entry correponds to a secondary interface (as oppose to a primary interface). This value cannot be changed after the row is creat… |
| 1.3.6.1.4.1.2272.1.8.2.1.12 | ColumnrcIpAdEntVrfId | read-create | current | The VrfId used in this table is to associate VLANs or Brouter ports to a VRF after the creation of VLANs or Brouter ports. VRFID 0 is reserved for the Administ… |
| 1.3.6.1.4.1.2272.1.8.2.1.13 | ColumnrcIpAdEntName | read-write | current | The administratively assigned name for this address |
| 1.3.6.1.4.1.2272.1.8.3 | TablercIpFlowTable | not-accessible | current | IpFlow Table. This table contain entries that correspond to RSVP records in the switching fabric Address Resolution table. A connection that has a matching ent… |
| 1.3.6.1.4.1.2272.1.8.3.1 | RowrcIpFlowEntry | not-accessible | current | Proprietary flow control variables. |
| 1.3.6.1.4.1.2272.1.8.3.1.1 | ColumnrcIpFlowSrcIpAddress | read-only | current | The source IP address of an IP packet. |
| 1.3.6.1.4.1.2272.1.8.3.1.2 | ColumnrcIpFlowSrcIpPort | read-only | current | The source port of an IP packet. A zero value in this field is used as a wildcard value. |
| 1.3.6.1.4.1.2272.1.8.3.1.3 | ColumnrcIpFlowDstIpAddress | read-only | current | The destination IP address of an IP packet. |
| 1.3.6.1.4.1.2272.1.8.3.1.4 | ColumnrcIpFlowDstIpPort | read-only | current | The destination port of an IP packet. A zero value in this field is used as a wildcard value. |
| 1.3.6.1.4.1.2272.1.8.3.1.5 | ColumnrcIpFlowProtocol | read-only | current | The protocol type of an IP packet. A zero value in this field is used as a wildcard value. |
| 1.3.6.1.4.1.2272.1.8.3.1.6 | ColumnrcIpFlowRowStatus | read-create | current | Status of entry. |
| 1.3.6.1.4.1.2272.1.8.4 | NodercIpRouting | |||
| 1.3.6.1.4.1.2272.1.8.8 | TablercIpConfDhcpTable | not-accessible | current | DHCP configuration table |
| 1.3.6.1.4.1.2272.1.8.8.1 | RowrcIpConfDhcpEntry | not-accessible | current | Used to configure DHCP on a particular port. An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry wil… |
| 1.3.6.1.4.1.2272.1.8.8.1.1 | ColumnrcIpConfDhcpIfIndex | read-only | current | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.2 | ColumnrcIpConfDhcpMaxHop | read-create | current | Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server). |
| 1.3.6.1.4.1.2272.1.8.8.1.3 | ColumnrcIpConfDhcpMinSec | read-create | current | Used to indicate the minimum number of seconds to wait between receiving a DHCP packet and actually forwarding the DHCP packet to the destination device. A val… |
| 1.3.6.1.4.1.2272.1.8.8.1.4 | ColumnrcIpConfDhcpMode | read-create | current | Used to indicate what type of DHCP packets this interface should support. A value of none(1) will result in all incoming DHCP and BOOTP packets to be dropped. |
| 1.3.6.1.4.1.2272.1.8.8.1.5 | ColumnrcIpConfDhcpRowStatus | read-create | current | An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry will only be deleted if the rcIpConfDhcpRowStatu… |
| 1.3.6.1.4.1.2272.1.8.8.1.6 | ColumnrcIpConfDhcpNumRequests | read-only | current | The total number of DHCP requests seen on this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.7 | ColumnrcIpConfDhcpNumReplies | read-only | current | The total number of DHCP replies seen on this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.8 | ColumnrcIpConfDhcpAlwaysBroadcast | read-create | current | Used to indicate if DHCP Reply packets should be broadcast to the DHCP client on this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.9 | ColumnrcIpConfDhcpClearCounters | read-create | current | This object is used to clear the DHCP counters in an entry. When set to clear(1), the values of the counter objects in the entry will be reset to 0, and the va… |
| 1.3.6.1.4.1.2272.1.8.8.1.10 | ColumnrcIpConfDhcpCounterClearTime | read-only | current | This object indicates the time at which the counter values in this entry were last reset to 0. |
| 1.3.6.1.4.1.2272.1.8.8.1.11 | ColumnrcIpConfDhcpCircuitId | read-write | current | Used to indicate if DHCP packets should have option82 circuitId info inserted before sent to servers, for this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.12 | ColumnrcIpConfDhcpRemoteId | read-write | current | Used to indicate if DHCP packets should have option82 remoteId info inserted before sent to servers, for this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.13 | ColumnrcIpConfDhcpTrusted | read-write | current | Used to indicate if DHCP packets come through a trusted dhcp circuit. This means that packets with giaddr set to 0 having option82 in it, will be forwarded if … |
| 1.3.6.1.4.1.2272.1.8.8.1.14 | ColumnrcIpConfDhcpAgentAddr | read-only | current | The IP address configured as relay on this interface; it is either the IP of the physical interface or the IP of the VRRP address |
| 1.3.6.1.4.1.2272.1.8.9 | TablercIpDhcpForwardTable | not-accessible | current | DHCP forwarding table. |
| 1.3.6.1.4.1.2272.1.8.9.1 | RowrcIpDhcpForwardEntry | not-accessible | current | An entry used represents a DHCP forwarding directive. |
| 1.3.6.1.4.1.2272.1.8.9.1.1 | ColumnrcIpDhcpForwardAgentAddr | read-only | current | The IP address configured on an interface (i.e., a locally configured IP address). |
| 1.3.6.1.4.1.2272.1.8.9.1.2 | ColumnrcIpDhcpForwardServerAddr | read-only | current | The IP address of the DHCP server. If this IP address corresponds to a locally configured IP network, the DHCP packet is broadcasted out the interface the IP a… |
| 1.3.6.1.4.1.2272.1.8.9.1.3 | ColumnrcIpDhcpForwardEnable | read-create | current | Used to indicate whether is entry should be used. |
| 1.3.6.1.4.1.2272.1.8.9.1.4 | ColumnrcIpDhcpForwardMode | read-create | current | Used to indicate whether this entry pertains to BOOTP packets, DHCP packets, or both. |
| 1.3.6.1.4.1.2272.1.8.9.1.5 | ColumnrcIpDhcpForwardRowStatus | read-create | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.10 | NodercIpFilter | |||
| 1.3.6.1.4.1.2272.1.8.11 | NodercIpPolicy | |||
| 1.3.6.1.4.1.2272.1.8.12 | NodercIpDvmrp | |||
| 1.3.6.1.4.1.2272.1.8.13 | NodercIpUdp | |||
| 1.3.6.1.4.1.2272.1.8.14 | NodercIpTosRule | |||
| 1.3.6.1.4.1.2272.1.8.14.1 | ScalarrcIpTosRuleAndMask | read-write | deprecated | And Mask. The Ip ToS byte in the Ip header is logically ANDed with this value, and then logically ORed with the one of the OrRules below. |
| 1.3.6.1.4.1.2272.1.8.14.2 | ScalarrcIpTosRuleOrRule1 | read-write | deprecated | Quid/Gid Or rule #1. The Ip ToS byte in the Ip header is logically ORed with this value. |
| 1.3.6.1.4.1.2272.1.8.14.3 | ScalarrcIpTosRuleOrRule2 | read-write | deprecated | Quid/Gid Or rule #2. The Ip ToS byte in the Ip header is logically ORed with this value. |
| 1.3.6.1.4.1.2272.1.8.14.4 | ScalarrcIpTosRuleOrRule3 | read-write | deprecated | Quid/Gid Or rule #3. The Ip ToS byte in the Ip header is logically ORed with this value. |
| 1.3.6.1.4.1.2272.1.8.14.5 | ScalarrcIpTosRuleTosPriorityEnable | read-write | deprecated | Enable Tos priority. |
| 1.3.6.1.4.1.2272.1.8.14.6 | ScalarrcIpTosRuleTosThreshold | read-only | deprecated | tos threshold |
| 1.3.6.1.4.1.2272.1.8.15 | NodercIpStaticRoute | |||
| 1.3.6.1.4.1.2272.1.8.16 | NodercIpPim | |||
| 1.3.6.1.4.1.2272.1.8.19 | NodercIpCops | |||
| 1.3.6.1.4.1.2272.1.8.19.1 | ScalarrcCopsGlobalEnable | read-write | deprecated | Cops feature enable/disable |
| 1.3.6.1.4.1.2272.1.8.20 | NodercIpRipInterface | |||
| 1.3.6.1.4.1.2272.1.8.22 | TablercIpConfIcmpRdiscTable | not-accessible | current | A table used to maintain ICMP Route discovery information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.22.1 | RowrcIpConfIcmpRdiscEntry | not-accessible | current | Entry containing ICMP Rdisc information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is co… |
| 1.3.6.1.4.1.2272.1.8.22.1.1 | ColumnrcIpConfIcmpRdiscIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.22.1.2 | ColumnrcIpConfIcmpRdiscAdvAddress | read-write | current | Advertisement address to which the route discovery advertisements transmitted on this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.3 | ColumnrcIpConfIcmpRdiscAdvFlag | read-write | current | Flag to indicate whether or not the address is to be advertised on this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.4 | ColumnrcIpConfIcmpRdiscAdvLifetime | read-write | current | The value to be placed in the lifetime field of Router Advertisements sent from the interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.5 | ColumnrcIpConfIcmpRdiscMaxAdvInterval | read-write | current | The maximum time allowed between sending Router Advertisements from this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.6 | ColumnrcIpConfIcmpRdiscMinAdvInterval | read-write | current | The minimum time allowed between sending Router Advertisements from this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.7 | ColumnrcIpConfIcmpRdiscPreferenceLevel | read-write | current | Preferability of the router address as a default Router |
| 1.3.6.1.4.1.2272.1.8.23 | NodercIpMulticastSoftwareForwarding | |||
| 1.3.6.1.4.1.2272.1.8.24 | NodercIpMrouteHw | |||
| 1.3.6.1.4.1.2272.1.8.25 | NodercIpResourceUsage | |||
| 1.3.6.1.4.1.2272.1.8.25.1 | NodercIpResourceUsageGlobal | |||
| 1.3.6.1.4.1.2272.1.8.25.1.1 | ScalarrcIpResourceUsageGlobalIngressRecInUse | read-only | current | Used to get the Ingress Record Usage in the switch. (S-G usage). |
| 1.3.6.1.4.1.2272.1.8.25.1.2 | ScalarrcIpResourceUsageGlobalEgressRecInUse | read-only | current | Used to get the Egress Record Usage in the switch (pepstream count). |
| 1.3.6.1.4.1.2272.1.8.25.1.3 | ScalarrcIpResourceUsageGlobalIngressThreshold | read-write | current | Used to get the threshold count for Ingress records. |
| 1.3.6.1.4.1.2272.1.8.25.1.4 | ScalarrcIpResourceUsageGlobalEgressThreshold | read-write | current | Used to get threshold count for egress records. |
| 1.3.6.1.4.1.2272.1.8.25.1.5 | ScalarrcIpResourceUsageGlobalSendTrapAndLog | read-write | current | A means of alerting the user. If this bool is set, a message will be send to console and also a duReport will be logged. |
| 1.3.6.1.4.1.2272.1.8.25.1.6 | ScalarrcIpResourceUsageGlobalSendTrapOnly | read-write | current | A means of alerting the user. If this bool is set, a message will be send to console. |
| 1.3.6.1.4.1.2272.1.8.25.1.7 | ScalarrcIpResourceUsageGlobalLogMsgOnly | read-write | current | A means of alerting the user.If this bool is set, a duReport will be logged. |
| 1.3.6.1.4.1.2272.1.8.26 | NodercIpRsmlt | |||
| 1.3.6.1.4.1.2272.1.8.26.1 | NodercIpRsmltGlobal | |||
| 1.3.6.1.4.1.2272.1.8.26.1.1 | ScalarrcIpRsmltGlobalTableSize | read-only | current | Route Smlt table size. |
| 1.3.6.1.4.1.2272.1.8.26.1.2 | ScalarrcIpRsmltEdgeSupportEnable | read-write | current | Used to enable/disable RSMLT Edge Support feature |
| 1.3.6.1.4.1.2272.1.8.26.2 | TablercIpRsmltOperTable | not-accessible | current | Route Smlt Table |
| 1.3.6.1.4.1.2272.1.8.26.2.1 | RowrcIpRsmltOperEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.1 | ColumnrcIpRsmltOperIfIndex | read-only | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.2 | ColumnrcIpRsmltOperAdminStatus | read-create | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.3 | ColumnrcIpRsmltOperHoldDownTimer | read-create | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.4 | ColumnrcIpRsmltOperHoldDownTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldDownTimer. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.5 | ColumnrcIpRsmltOperHoldUpTimer | read-create | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.6 | ColumnrcIpRsmltOperHoldUpTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldUpTimer. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.7 | ColumnrcIpRsmltOperIpAddr | read-only | current | IP Interface with RSMLT on. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.8 | ColumnrcIpRsmltOperOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.9 | ColumnrcIpRsmltOperSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.10 | ColumnrcIpRsmltOperSltId | read-only | current | The id range for SLT is 1-512. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.11 | ColumnrcIpRsmltOperVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.12 | ColumnrcIpRsmltOperMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.13 | ColumnrcIpRsmltOperRowStatus | read-create | current | Row Status. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.14 | ColumnrcIpRsmltOperVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Oper instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.15 | ColumnrcIpRsmltOperVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Oper instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.3 | TablercIpRsmltPeerTable | not-accessible | current | Route Smlt Table |
| 1.3.6.1.4.1.2272.1.8.26.3.1 | RowrcIpRsmltPeerEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.1 | ColumnrcIpRsmltPeerIfIndex | read-only | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.2 | ColumnrcIpRsmltPeerAdminStatus | read-only | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.3 | ColumnrcIpRsmltPeerHoldDownTimer | read-only | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.4 | ColumnrcIpRsmltPeerHoldDownTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldDownTimer. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.5 | ColumnrcIpRsmltPeerHoldUpTimer | read-only | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.6 | ColumnrcIpRsmltPeerHoldUpTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldUpTimer. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.7 | ColumnrcIpRsmltPeerIpAddr | read-only | current | IP Interface with RSMLT on. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.8 | ColumnrcIpRsmltPeerOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.9 | ColumnrcIpRsmltPeerSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.10 | ColumnrcIpRsmltPeerSltId | read-only | current | The id range for SLT is 1-512. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.11 | ColumnrcIpRsmltPeerVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.12 | ColumnrcIpRsmltPeerMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.13 | ColumnrcIpRsmltPeerVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.14 | ColumnrcIpRsmltPeerVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.4 | TablercIpRsmltEdgePeerTable | not-accessible | current | RSMLT Edge Support Peer Info table. This table consists of the RSMLT Peers for which the switch will act as a PeerForwarder. |
| 1.3.6.1.4.1.2272.1.8.26.4.1 | RowrcIpRsmltEdgePeerEntry | not-accessible | current | RSMLT Edge Support Peer Info Entry |
| 1.3.6.1.4.1.2272.1.8.26.4.1.1 | ColumnrcIpRsmltEdgeVlanId | not-accessible | current | A value that uniquely identifies the Virtual LAN associated with this entry. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.2 | ColumnrcIpRsmltEdgePeerIpAddress | read-only | current | IP address of the Peer RSMLT Interface. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.3 | ColumnrcIpRsmltEdgePeerMacAddress | read-only | current | The MAC address of the Peer RSMLT interface. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.4 | ColumnrcIpRsmltEdgePeerVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Edge Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.5 | ColumnrcIpRsmltEdgePeerVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Edge Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.27 | NodercIpVpn | |||
| 1.3.6.1.4.1.2272.1.8.28 | NodercIpDhcpForwardingScalars | |||
| 1.3.6.1.4.1.2272.1.8.28.1 | ScalarrcIpDhcpForwardingEnabled | read-write | current | Indicates whether DHCP forwarding is globally enabled. |
| 1.3.6.1.4.1.2272.1.8.28.2 | ScalarrcIpDhcpForwardingOption82Enabled | read-write | current | Indicates whether the use of DHCP option 82 is enabled. |
| 1.3.6.1.4.1.2272.1.8.28.3 | ScalarrcIpDhcpForwardingMaxFrameLength | read-write | current | Maximum DHCP frame length. |
| 1.3.6.1.4.1.2272.1.8.28.4 | ScalarrcIpDhcpForwardingOption82RemoteId | read-write | current | This object is used to control what value will be used for the DHCP option 82 remote-id suboption. |
| 1.3.6.1.4.1.2272.1.8.28.5 | ScalarrcIpDhcpForwardingOption82RemoteIdString | read-write | current | This object is used to set the string wich will be used for the value of the DHCP option 82 remote-id when the value of rcIpDhcpForwardingOption82RemoteId is s… |
| 1.3.6.1.4.1.2272.1.8.29 | TablercIpDhcpOp82StatsTable | not-accessible | current | DHCP statistics table for Relay Agent Information Option |
| 1.3.6.1.4.1.2272.1.8.29.1 | RowrcIpDhcpOp82StatsEntry | not-accessible | current | Used to see current statistics on interfaces that have DHCP Option 82 (Relay Agent Information) enabled. This table is read-only. |
| 1.3.6.1.4.1.2272.1.8.29.1.1 | ColumnrcIpDhcpOp82StatsIfIndex | not-accessible | current | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| 1.3.6.1.4.1.2272.1.8.29.1.2 | ColumnrcIpDhcpOp82StatsFoundOp82 | read-only | current | Represents the number of packets received on the interface that already had Dhcp Option 82 inserted in them |
| 1.3.6.1.4.1.2272.1.8.29.1.3 | ColumnrcIpDhcpOp82StatsDropped | read-only | current | Represents the number of packets dropped because of reasons related to Dhcp Option 82. These reasons could be that the packet was received from an untrusted so… |
| 1.3.6.1.4.1.2272.1.8.29.1.4 | ColumnrcIpDhcpOp82StatsCircuitId | read-only | current | Represents the value of CircuitId inserted in the packets. This is the Port number of the Dhcp Relay. |
| 1.3.6.1.4.1.2272.1.8.29.1.5 | ColumnrcIpDhcpOp82StatsAddedCircuitId | read-only | current | Represents the number of packets which had CircuitId inserted on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.6 | ColumnrcIpDhcpOp82StatsRemovedCircuitId | read-only | current | Represents the number of packets which had CircuitId removed on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.7 | ColumnrcIpDhcpOp82StatsRemoteId | read-only | current | Represents the value of RemoteId inserted in the packets. This is the Mac address of the Dhcp Relay. |
| 1.3.6.1.4.1.2272.1.8.29.1.8 | ColumnrcIpDhcpOp82StatsAddedRemoteId | read-only | current | Represents the number of packets which had RemoteId inserted on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.9 | ColumnrcIpDhcpOp82StatsRemovedRemoteId | read-only | current | Represents the number of packets which had RemoteId removed on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.10 | ColumnrcIpDhcpOp82StatsAgentAddr | read-only | current | The IP address configured as relay on this interface; it is either the IP of the physical interface or the IP of the VRRP address |
| 1.3.6.1.4.1.2272.1.8.30 | TablercIpNetToMediaTable | not-accessible | current | The IP Address Translation table used for mapping from IP addresses to physical addresses. |
| 1.3.6.1.4.1.2272.1.8.30.1 | RowrcIpNetToMediaEntry | not-accessible | current | Each entry contains one IpAddress to `physical' address equivalence. |
| 1.3.6.1.4.1.2272.1.8.30.1.1 | ColumnrcIpNetToMediaNetAddress | not-accessible | current | The IpAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.4.1.2272.1.8.30.1.2 | ColumnrcIpNetToMediaIfIndex | not-accessible | current | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.2272.1.8.30.1.3 | ColumnrcIpNetToMediaPhysAddress | read-create | current | The media-dependent `physical' address. |
| 1.3.6.1.4.1.2272.1.8.30.1.4 | ColumnrcIpNetToMediaType | read-only | current | The is ARP entry type field. |
| 1.3.6.1.4.1.2272.1.8.30.1.5 | ColumnrcIpNetToMediaTimeToLive | read-only | current | This is TTL (time to live) field. |
| 1.3.6.1.4.1.2272.1.8.30.1.6 | ColumnrcIpNetToMediaRowStatus | read-create | current | Table row status. |
| 1.3.6.1.4.1.2272.1.8.30.1.7 | ColumnrcIpNetToMediaDestIfIndex | read-create | current | Destination IfIndex. |
| 1.3.6.1.4.1.2272.1.8.30.1.8 | ColumnrcIpNetToMediaDestVlanId | read-create | current | Destination VlanId. |
| 1.3.6.1.4.1.2272.1.8.30.1.9 | ColumnrcIpNetToMediaBMac | read-only | current | If the rcIpNetToMediaEntry is learned from a SPBM network, instead of using port to track where the rcIpNetToMediaNetAddress come from, the backbone MAC addres… |
| 1.3.6.1.4.1.2272.1.8.30.1.10 | ColumnrcIpNetToMediaDestCvid | read-only | current | Used to identify customer vid of the switched uni port of this entry is associated with. 4095 is not used. 4096 is reserved for untagged case. |
| 1.3.6.1.4.1.2272.1.8.31 | TablercIpMvpnTable | not-accessible | current | Table required to configure mvpn |
| 1.3.6.1.4.1.2272.1.8.31.1 | RowrcIpMvpnTableEntry | not-accessible | current | Entries in this table are per rcVrfId. |
| 1.3.6.1.4.1.2272.1.8.31.1.1 | ColumnrcIpMvpnVrfId | not-accessible | current | The VrfId serves as the Index for rcVrfIpMvpnTableEntry |
| 1.3.6.1.4.1.2272.1.8.31.1.2 | ColumnrcIpMvpnEnable | read-write | current | The status of mvpn on a vrf. |
| 1.3.6.1.4.1.2272.1.8.31.1.3 | ColumnrcIpMvpnFwdCacheTimeout | read-write | current | Mvpn Fwd Cache Timeout in seconds |
| 1.3.6.1.4.1.2272.1.8.100 | NodercIpGenPolicy | |||
| 1.3.6.1.4.1.2272.1.8.101 | NodercIpBgp | |||
| 1.3.6.1.4.1.2272.1.8.102 | NodercIpMpls | |||
| 1.3.6.1.4.1.2272.1.8.103 | NodercIpInterVrfStaticRoute | |||
| 1.3.6.1.4.1.2272.1.8.104 | NodercIpBfd | |||
| 1.3.6.1.4.1.2272.1.8.104.1 | ScalarrcIpBfdTrapEnabled | read-write | current | Used to indicate whether BFD traps should be sent or not |
| 1.3.6.1.4.1.2272.1.8.104.2 | ScalarrcIpBfdHoldOffTimerInterval | read-write | current | This object specifies the hold off timer interval, in second. 0 means that hold off timer is disabled. |
| 1.3.6.1.4.1.2272.1.8.105 | NodercIpStaticMRoute | |||
| 1.3.6.1.4.1.2272.1.8.106 | NodercIpEcmp | |||
| 1.3.6.1.4.1.2272.1.8.107 | TablercIPClearArpRecordTable | not-accessible | current | Table used to clear an IP ARP Record. |
| 1.3.6.1.4.1.2272.1.8.107.1 | RowrcIPClearArpRecordEntry | not-accessible | current | IP Clear ARP Record Table Entry |
| 1.3.6.1.4.1.2272.1.8.107.1.1 | ColumnrcIPClearArpRecordIpAddr | not-accessible | current | IP Address that needs to be cleared. |
| 1.3.6.1.4.1.2272.1.8.107.1.2 | ColumnrcIPClearArpRecordVlanId | not-accessible | current | Vlan Id where the ARP record has to be cleared. |
| 1.3.6.1.4.1.2272.1.8.107.1.3 | ColumnrcIPClearArpRecordLCForceDelete | read-write | current | By default, when LCForceDelete (Line Card Force Delete) is set to false, if the ARP record is not found on the CP, then no message will be sent to the line-car… |
| 1.3.6.1.4.1.2272.1.8.108 | TablercIPClearIPMCRecordTable | not-accessible | current | Table used to clear an IP MC Record. |
| 1.3.6.1.4.1.2272.1.8.108.1 | RowrcIPClearIPMCRecordEntry | not-accessible | current | IP Clear IP MC Record Table Entry |
| 1.3.6.1.4.1.2272.1.8.108.1.1 | ColumnrcIPClearIPMCRecordGroup | not-accessible | current | The IP Multicast Group Address. |
| 1.3.6.1.4.1.2272.1.8.108.1.2 | ColumnrcIPClearIPMCRecordVlanId | not-accessible | current | Vlan Id where the IP MC record has to be cleared. |
| 1.3.6.1.4.1.2272.1.8.108.1.3 | ColumnrcIPClearIPMCRecordSource | read-write | current | The Source IP Address. |
| 1.3.6.1.4.1.2272.1.8.108.1.4 | ColumnrcIPClearIPMCRecordLCForceDelete | read-write | current | By default, when LCForceDelete (Line Card Force Delete) is set to false, if the IP MC record is not found on the CP, then no message will be sent to the line-c… |
| 1.3.6.1.4.1.2272.1.8.109 | NodercIpMulticastSquareSmlt | |||
| 1.3.6.1.4.1.2272.1.8.109.1 | ScalarrcIpMulticastSquareSmltEnable | read-write | current | Enable/Disable multicast Square Smlt. |
| 1.3.6.1.4.1.2272.1.8.110 | NodercIpIsis | |||
| 1.3.6.1.4.1.2272.1.8.110.1 | NodercIpIsisGenInFilter | |||
| 1.3.6.1.4.1.2272.1.8.110.1.1 | ScalarrcIpIsisInFilterNickNameTableSize | read-only | current | Ip Isis In Filter Nick Name table size |
| 1.3.6.1.4.1.2272.1.8.110.1.2 | ScalarrcIpIsisInFilterIsidTableSize | read-only | current | Ip Isis In Filter Isid table size |
| 1.3.6.1.4.1.2272.1.8.110.1.3 | ScalarrcIpIsisInFilterNickNameIsidTableSize | read-only | current | Ip Isis In Filter Nick Name Isid table size |
| 1.3.6.1.4.1.2272.1.8.110.1.4 | ScalarrcIpIsisInFilterIsidListTableSize | read-only | current | Ip Isis In Filter Isid List table size |
| 1.3.6.1.4.1.2272.1.8.110.1.5 | ScalarrcIpIsisInFilterNickNameIsidListTableSize | read-only | current | Ip Isis In Filter Nick Name Isid List table size |
| 1.3.6.1.4.1.2272.1.8.110.1.6 | ScalarrcIpIsisInFilterApply | read-write | current | Used to Apply the Ip Isis Accept filters. When the value is set to apply, all the elements in the in the various Ip Isis In Filter Tables will be applied as we… |
| 1.3.6.1.4.1.2272.1.8.110.2 | NodercIpIsisInFilter | |||
| 1.3.6.1.4.1.2272.1.8.110.2.1 | TablercIpIsisInFilterNickNameTable | not-accessible | current | IP Isis In Filter Nick Name table |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1 | RowrcIpIsisInFilterNickNameEntry | not-accessible | current | An entry of Ip Isis In Filter Nick Name Table. |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1.1 | ColumnrcIpIsisInFilterNickNameAdvertisingRtr | not-accessible | current | NickName used to filter by |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1.2 | ColumnrcIpIsisInFilterNickNameEnable | read-create | current | Enables or disables the NickName entry. The value must be enabled to filter. |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1.3 | ColumnrcIpIsisInFilterNickNamePolicyName | read-create | current | Route Map name used |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1.4 | ColumnrcIpIsisInFilterNickNameRowStatus | read-create | current | Ip Isis In Filter Nick Name Table Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.1.1.5 | ColumnrcIpIsisInFilterNickNameBackBonePolicyName | read-create | current | Backbone Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.2 | TablercIpIsisInFilterIsidTable | not-accessible | current | IP Isis In Filter Isid Isid table |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1 | RowrcIpIsisInFilterIsidEntry | not-accessible | current | An entry of Ip Isis In Filter Table. |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1.1 | ColumnrcIpIsisInFilterIsid | not-accessible | current | Isid value used to filter by. The value 0 is used for Global Router. |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1.2 | ColumnrcIpIsisInFilterIsidEnable | read-create | current | Enables or disables the Isid entry. The value must be enabled to filter. |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1.3 | ColumnrcIpIsisInFilterIsidPolicyName | read-create | current | Route Map name used |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1.4 | ColumnrcIpIsisInFilterIsidRowStatus | read-create | current | Ip Isis In Filter Isid Table Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.2.1.5 | ColumnrcIpIsisInFilterIsidBackbonePolicyName | read-create | current | Backbone Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.3 | TablercIpIsisInFilterNickNameIsidTable | not-accessible | current | IP Isis In Filter Nick Name Isid table |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1 | RowrcIpIsisInFilterNickNameIsidEntry | not-accessible | current | An entry of Ip Isis In Filter Nick Name Isid Table. |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.1 | ColumnrcIpIsisInFilterNickNameIsidAdvertisingRtr | not-accessible | current | NickName used to filter by |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.2 | ColumnrcIpIsisInFilterNickNameIsid | not-accessible | current | Isid used to filter by. The value 0 is used for Global Router. |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.3 | ColumnrcIpIsisInFilterNickNameIsidEnable | read-create | current | |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.4 | ColumnrcIpIsisInFilterNickNameIsidPolicyName | read-create | current | Route Map name used |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.5 | ColumnrcIpIsisInFilterNickNameIsidRowStatus | read-create | current | Ip Isis In Filter Nick Name Isid Table Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.3.1.6 | ColumnrcIpIsisInFilterNickNameIsidBackBonePolicyName | read-create | current | Backbone Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.4 | TablercIpIsisIsidListTable | not-accessible | current | IP Isis Isid List table |
| 1.3.6.1.4.1.2272.1.8.110.2.4.1 | RowrcIpIsisIsidListEntry | not-accessible | current | An entry of Ip Isis Isid List Table. |
| 1.3.6.1.4.1.2272.1.8.110.2.4.1.1 | ColumnrcIpIsisIsidListName | not-accessible | current | Name of Isid List |
| 1.3.6.1.4.1.2272.1.8.110.2.4.1.2 | ColumnrcIpIsisIsidListIsid | not-accessible | current | Is a member of the specified isid list. The value is the i-sid integer value or the value 0 is used for Global Router. |
| 1.3.6.1.4.1.2272.1.8.110.2.4.1.3 | ColumnrcIpIsisIsidListRowStatus | read-create | current | Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.5 | TablercIpIsisInFilterIsidListTable | not-accessible | current | IP Isis In Filter Isid List table |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1 | RowrcIpIsisInFilterIsidListEntry | not-accessible | current | An entry of Ip Isis In Filter Table. |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1.1 | ColumnrcIpIsisInFilterIsidListName | not-accessible | current | Name of Isid List |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1.2 | ColumnrcIpIsisInFilterIsidListEnable | read-create | current | Enables or disables the Isid List entry. The value must be enabled to filter. |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1.3 | ColumnrcIpIsisInFilterIsidListPolicyName | read-create | current | Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1.4 | ColumnrcIpIsisInFilterIsidListRowStatus | read-create | current | Ip Isis In Filter Isid List Table Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.5.1.5 | ColumnrcIpIsisInFilterIsidListBackBonePolicyName | read-create | current | Backbone Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.6 | TablercIpIsisInFilterNickNameIsidListTable | not-accessible | current | IP Isis In Filter Nick Name Isid List table |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1 | RowrcIpIsisInFilterNickNameIsidListEntry | not-accessible | current | An entry of Ip Isis In Filter Nick Name Isid ListTable |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.1 | ColumnrcIpIsisInFilterNickNameIsidListAdvertisingRtr | not-accessible | current | NickName used to filter by |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.2 | ColumnrcIpIsisInFilterNickNameIsidListName | not-accessible | current | Name of Isid List used to filter |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.3 | ColumnrcIpIsisInFilterNickNameIsidListEnable | read-create | current | Enables or disables the NickName IsidList entry. The value must be enabled to filter. |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.4 | ColumnrcIpIsisInFilterNickNameIsidListPolicyName | read-create | current | Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.5 | ColumnrcIpIsisInFilterNickNameIsidListRowStatus | read-create | current | Ip Isis In Filter Nick Name Isid List Table Row Status |
| 1.3.6.1.4.1.2272.1.8.110.2.6.1.6 | ColumnrcIpIsisInFilterNickNameIsidListBackBonePolicyName | read-create | current | Backbone Route Map name |
| 1.3.6.1.4.1.2272.1.8.110.2.7 | NodercIpIsisInFilterDefault | |||
| 1.3.6.1.4.1.2272.1.8.110.2.7.1 | ScalarrcIpIsisInFilterDefaultPolicyName | read-write | current | Route Map name for the default filter |
| 1.3.6.1.4.1.2272.1.8.110.2.7.2 | ScalarrcIpIsisInFilterDefaultBackbonePolicyName | read-write | current | Backbone Route Map name for the default filter |
| 1.3.6.1.4.1.2272.1.8.111 | NodercIpIpmcPimStaleSessionDelete | |||
| 1.3.6.1.4.1.2272.1.8.111.1 | ScalarrcIpIpmcPimStaleSessionDeleteEnable | read-write | current | Enable/Disable PIM ipmc stale session delete feature |
| 1.3.6.1.4.1.2272.1.8.114 | NodercIpSpbPimGw | |||
| 1.3.6.1.4.1.2272.1.8.114.1 | NodercIpSpbPimGwGlobal | |||
| 1.3.6.1.4.1.2272.1.8.114.1.1 | ScalarrcIpSpbPimGwGlobalHelloInterval | read-only | current | PIM Gateway Hello transmission interval. The PIM Gateway VLAN inherits this value. The Gateway VLAN Level setting will override this. |
| 1.3.6.1.4.1.2272.1.8.114.1.2 | ScalarrcIpSpbPimGwGlobalJoinPruneInterval | read-only | current | PIM Gateway Join/Prune transmission interval. The PIM Gateway VLAN inherits this value. The Gateway VLAN level setting will override this. |
| 1.3.6.1.4.1.2272.1.8.114.2 | TablercIpSpbPimGwInterfaceTable | not-accessible | current | IP PIM Gateway table |
| 1.3.6.1.4.1.2272.1.8.114.2.1 | RowrcIpSpbPimGwInterfaceEntry | not-accessible | current | An entry of Ip Pim Gateway Interface Table. |
| 1.3.6.1.4.1.2272.1.8.114.2.1.1 | ColumnrcIpSpbPimGwInterfaceIfIndex | not-accessible | current | port |
| 1.3.6.1.4.1.2272.1.8.114.2.1.2 | ColumnrcIpSpbPimGwInterfaceOperState | read-only | current | The current operational state of this PIM-gw interface. |
| 1.3.6.1.4.1.2272.1.8.114.2.1.3 | ColumnrcIpSpbPimGwInterfaceAddressType | read-only | current | The address type of this PIM-gw interface. |
| 1.3.6.1.4.1.2272.1.8.114.2.1.4 | ColumnrcIpSpbPimGwInterfaceAddress | read-only | current | The primary IP address of this router on this PIM-gw interface. The InetAddressType is given by the rcIpSpbPimGwInterfaceAddressType object. |
| 1.3.6.1.4.1.2272.1.8.114.2.1.5 | ColumnrcIpSpbPimGwInterfaceAddressMask | read-only | current | The primary IP address mask of this router on this PIM-gw interface. |
| 1.3.6.1.4.1.2272.1.8.114.2.1.6 | ColumnrcIpSpbPimGwInterfaceHelloInterval | read-write | current | PIM Hello transmission interval. The PIM-GW VLAN inherits this value. The PIM-gw VLAN level setting will override this.Setting Hello interval to 0 will cause P… |
| 1.3.6.1.4.1.2272.1.8.114.2.1.7 | ColumnrcIpSpbPimGwInterfaceJoinPruneInterval | read-write | current | PIM Join/Prune transmission interval. The PIM-GW VLAN inherits this value. The PIM-gw VLAN level setting will override this. |
| 1.3.6.1.4.1.2272.1.8.114.3 | TablercIpSpbPimGwNeighborTable | not-accessible | current | The PIM-gw neighbor Table |
| 1.3.6.1.4.1.2272.1.8.114.3.1 | RowrcIpSpbPimGwNeighborEntry | not-accessible | current | An entry (conceptual row) in the pimNeighborTable. |
| 1.3.6.1.4.1.2272.1.8.114.3.1.1 | ColumnrcIpSpbPimGwNeighborIfIndex | not-accessible | current | The value of ifIndex for the interface used to reach this PIM-gw neighbor. |
| 1.3.6.1.4.1.2272.1.8.114.3.1.2 | ColumnrcIpSpbPimGwNeighborAddressType | not-accessible | current | The address type of this PIM-gw neighbor. |
| 1.3.6.1.4.1.2272.1.8.114.3.1.3 | ColumnrcIpSpbPimGwNeighborAddress | not-accessible | current | The primary IP address of this PIM-gw neighbor. The InetAddressType is given by the rcIpSpbPimGwNeighborAddressType object. |
| 1.3.6.1.4.1.2272.1.8.114.3.1.4 | ColumnrcIpSpbPimGwNeighborUpTime | read-only | current | The time since this PIM-gw neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.2272.1.8.114.3.1.5 | ColumnrcIpSpbPimGwNeighborExpiryTime | read-only | current | The minimum time remaining before this PIM-gw neighbor will time out. |
| 1.3.6.1.4.1.2272.1.8.114.4 | TablercIpSpbPimGwControllerForeignSrcTable | not-accessible | current | IP Multicast foreign source table from Pim-gw controller. This is table of IP multicast sources from non-SPBM domain. |
| 1.3.6.1.4.1.2272.1.8.114.4.1 | RowrcIpSpbPimGwControllerForeignSrcEntry | not-accessible | current | An entry of IP multicast foreign source. |
| 1.3.6.1.4.1.2272.1.8.114.4.1.1 | ColumnrcIpSpbPimGwControllerForeignSrcSourceAddress | not-accessible | current | The source IP address from non-SPBM multicast domain. |
| 1.3.6.1.4.1.2272.1.8.114.4.1.2 | ColumnrcIpSpbPimGwControllerForeignSrcGroupAddress | not-accessible | current | Multicast group IP address associated with the foreign source. |
| 1.3.6.1.4.1.2272.1.8.114.4.1.3 | ColumnrcIpSpbPimGwControllerForeignSrcRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.8.114.4.1.4 | ColumnrcIpSpbPimGwControllerForeignSrcGatewaySysId | read-only | current | System ID of the node selected as the gateway for this foreing source. This object has valid value if the source has a gateway assigned. If the source is not a… |
| 1.3.6.1.4.1.2272.1.8.114.4.1.5 | ColumnrcIpSpbPimGwControllerForeignSrcGatewayHostName | read-only | current | Host name of the node selected as the gateway for this foreign source. This object has valid value if the source has a gateway assigned. If the source is not a… |
| 1.3.6.1.4.1.2272.1.8.114.4.1.6 | ColumnrcIpSpbPimGwControllerForeignSrcType | read-only | current | The type of the owner of this source. |
| 1.3.6.1.4.1.2272.1.8.114.4.1.7 | ColumnrcIpSpbPimGwControllerForeignSrcOwner | read-only | current | The IP address of the MSDP peer if the foreign source type (rcIpSpbPimGwControllerForeignSrcType) is MSDP. |
| 1.3.6.1.4.1.2272.1.8.114.5 | TablercIpSpbPimGwControllerSpbmcSrcTable | not-accessible | current | SPB Multicast source table from SPB PIM GW controller. This table is for all SPBM sources distributed to MSDP. |
| 1.3.6.1.4.1.2272.1.8.114.5.1 | RowrcIpSpbPimGwControllerSpbmcSrcEntry | not-accessible | current | An entry of SPBMC source sent to MSDP. |
| 1.3.6.1.4.1.2272.1.8.114.5.1.1 | ColumnrcIpSpbPimGwControllerSpbmcSrcSourceAddress | not-accessible | current | The source IP address from SPBM multicast domain. |
| 1.3.6.1.4.1.2272.1.8.114.5.1.2 | ColumnrcIpSpbPimGwControllerSpbmcSrcGroupAddress | not-accessible | current | Multicast group IP address associated with the SPBMC source. |
| 1.3.6.1.4.1.2272.1.8.114.5.1.3 | ColumnrcIpSpbPimGwControllerSpbmcSrcOriginatorSysId | read-only | current | System ID of the node to which the source is attached to. |
| 1.3.6.1.4.1.2272.1.8.114.5.1.4 | ColumnrcIpSpbPimGwControllerSpbmcSrcOriginatorHostName | read-only | current | Host name of the node to which the source is attached to. |
| 1.3.6.1.4.1.2272.1.8.114.6 | TablercIpSpbPimGwGatewayForeignSrcTable | not-accessible | current | IP Multicast foreign source table from SPB PIM GW gateway. |
| 1.3.6.1.4.1.2272.1.8.114.6.1 | RowrcIpSpbPimGwGatewayForeignSrcEntry | not-accessible | current | An entry of IP multicast foreign source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.1 | ColumnrcIpSpbPimGwGatewayForeignSrcSourceAddress | not-accessible | current | The source IP address foreign source entry. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.2 | ColumnrcIpSpbPimGwGatewayForeignSrcGroupAddress | not-accessible | current | Multicast group IP address associated with the foreign source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.3 | ColumnrcIpSpbPimGwGatewayForeignSrcControllerSysId | not-accessible | current | System ID of the controller node (preferred controller) that sent this foreing source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.4 | ColumnrcIpSpbPimGwGatewayForeignSrcControllerHostName | read-only | current | Host name of the controller node that sent this foreing source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.5 | ColumnrcIpSpbPimGwGatewayForeignSrcGatewaySysId | read-only | current | System ID of the node selected as the gateway for this foreing source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.6 | ColumnrcIpSpbPimGwGatewayForeignSrcGatewayHostName | read-only | current | Host name of the node assigned as the gateway for this foreign source. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.7 | ColumnrcIpSpbPimGwGatewayForeignSrcInVid | read-only | current | The VLAN id of the PimGw interface through which the source of this source is reachable. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.8 | ColumnrcIpSpbPimGwGatewayForeignSrcInPort | read-only | current | A unique value to identify a physical interce through which the source of this source is reachable. |
| 1.3.6.1.4.1.2272.1.8.114.6.1.9 | ColumnrcIpSpbPimGwGatewayForeignSrcOwnerType | read-only | current | This will specify the type of the owner - msdp - if the owner is MSDP static - otherwise |
| 1.3.6.1.4.1.2272.1.8.114.7 | TablercIpSpbPimGwNodeTable | not-accessible | current | The PIM-gw node Table |
| 1.3.6.1.4.1.2272.1.8.114.7.1 | RowrcIpSpbPimGwNodeEntry | not-accessible | current | An entry (conceptual row) in the pimNodeTable. |
| 1.3.6.1.4.1.2272.1.8.114.7.1.1 | ColumnrcIpSpbPimGwNodeMacAddress | not-accessible | current | The Max Address of the active node. |
| 1.3.6.1.4.1.2272.1.8.114.7.1.2 | ColumnrcIpSpbPimGwNodeHostName | read-only | current | The Host name of the active node. |
| 1.3.6.1.4.1.2272.1.8.114.7.1.3 | ColumnrcIpSpbPimGwNodeRoleType | read-only | current | The role type of the node. It is either Gateway, Controller or both. |
| 1.3.6.1.4.1.2272.1.8.115 | NodercMRouteExt | |||
| 1.3.6.1.4.1.2272.1.8.115.1 | TablercMRouteExtTable | not-accessible | current | The (conceptual) table containing multicast routing information for IP datagrams sent by particular sources to the IP multicast groups known to this router. |
| 1.3.6.1.4.1.2272.1.8.115.1.1 | RowrcMRouteExtEntry | not-accessible | current | An entry (conceptual row) containing the multicast routing information for IP datagrams from a particular source and addressed to a particular IP multicast gro… |
| 1.3.6.1.4.1.2272.1.8.115.1.1.1 | ColumnrcMRouteExtProtocol | read-only | current | The routing mechanism via which this route was learned. |
| 1.3.6.1.4.1.2272.1.8.115.2 | TablercMRouteExtNextHopTable | not-accessible | current | The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. Each entry is one of a list of next h… |
| 1.3.6.1.4.1.2272.1.8.115.2.1 | RowrcMRouteExtNextHopEntry | not-accessible | current | An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources to a IP multicast group addre… |
| 1.3.6.1.4.1.2272.1.8.115.2.1.1 | ColumnrcMRouteExtNextHopProtocol | read-only | current | The routing mechanism via which this next-hop was learned. |
| 1.3.6.1.4.1.2272.1.8.115.2.1.2 | ColumnrcMRouteExtNextHopL2Isid | read-only | current | L2 ISID of the cvlan. |
| 1.3.6.1.4.1.2272.1.8.115.3 | TablercMRouteExtInterfaceTable | not-accessible | current | The (conceptual) table containg multicast routing information specific to interfaces. |
| 1.3.6.1.4.1.2272.1.8.115.3.1 | RowrcMRouteExtInterfaceEntry | not-accessible | current | An entry (conceptual row) containing the multicast routing information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.115.3.1.1 | ColumnrcMRouteExtInterfaceProtocol | read-only | current | The routing protocol running on this interface. |
| 1.3.6.1.4.1.2272.1.8.115.4 | TablercMRouteExtNextHopPortTable | not-accessible | current | The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. Each entry is one of a list of next h… |
| 1.3.6.1.4.1.2272.1.8.115.4.1 | RowrcMRouteExtNextHopPortEntry | not-accessible | current | An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources to a IP multicast group addre… |
| 1.3.6.1.4.1.2272.1.8.115.4.1.1 | ColumnrcMRouteExtNextHopPortGroup | not-accessible | current | The IP multicast group for which this entry specifies a next hop on an outgoing interface. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.2 | ColumnrcMRouteExtNextHopPortSource | not-accessible | current | The network address which when combined with the corresponding value of ipMRouteNextHopSourceMask identifies the sources for which this entry specifies a next … |
| 1.3.6.1.4.1.2272.1.8.115.4.1.3 | ColumnrcMRouteExtNextHopPortSourceMask | not-accessible | current | The network mask which when combined with the corresponding value of ipMRouteNextHopSource identifies the sources for which this entry specifies a next hop on … |
| 1.3.6.1.4.1.2272.1.8.115.4.1.4 | ColumnrcMRouteExtNextHopPortIfIndex | not-accessible | current | The ifIndex value of the interface for the outgoing interface for this next hop. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.5 | ColumnrcMRouteExtNextHopPortReceiverPort | not-accessible | current | The port number where the receiver exists for this next hop. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.6 | ColumnrcMRouteExtNextHopPortAddress | not-accessible | current | The address of the next hop specific to this entry. For most interfaces, this is identical to ipMRouteNextHopGroup. NBMA interfaces, however, may have multiple… |
| 1.3.6.1.4.1.2272.1.8.115.4.1.7 | ColumnrcMRouteExtNextHopPortState | read-only | current | An indication of whether the outgoing interface and next hop represented by this entry is currently being used to forward IP datagrams. The value 'forwarding' … |
| 1.3.6.1.4.1.2272.1.8.115.4.1.8 | ColumnrcMRouteExtNextHopPortUpTime | read-only | current | The time since the multicast routing information represented by this entry was learned by the router. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.9 | ColumnrcMRouteExtNextHopPortExpiryTime | read-only | current | The minimum amount of time remaining before this entry will be aged out. The value 0 indicates that the entry is not subject to aging. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.10 | ColumnrcMRouteExtNextHopPortClosestMemberHops | read-only | current | The minimum number of hops between this router and any member of this IP multicast group reached via this next hop on this outgoing interface. Any IP multicast… |
| 1.3.6.1.4.1.2272.1.8.115.4.1.11 | ColumnrcMRouteExtNextHopPortProtocol | read-only | current | The routing mechanism via which this next-hop was learned. |
| 1.3.6.1.4.1.2272.1.8.115.4.1.12 | ColumnrcMRouteExtNextHopPortPkts | read-only | current | The number of packets which have been forwarded using this route. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IpIsisPlsbNodeNickName | OCTET STRING (SIZE(3)) | current | Plsb Node Nick name. |