RC-MPLS-TE-MIB
63 objects
No module-level DESCRIPTION found.
Imported Objects
| RC-SMI | rc |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.65000.1 | IdentityrcMplsTeMIB | |||
| 1.3.6.1.4.1.65000.1.0 | NodercMplsTeNotifications | |||
| 1.3.6.1.4.1.65000.1.0.1 | NotificationrcMplsLspUp | current | This notification is generated when a MplsTunnelOperStatus object for one of the LSPs is about to leave the down state and transition into up state. | |
| 1.3.6.1.4.1.65000.1.0.2 | NotificationrcMplsLspDown | current | This notification is generated when a MplsTunnelOperStatus object for one of the LSPs is about to leave the up state and transition into down state. | |
| 1.3.6.1.4.1.65000.1.1 | TablercMplsTETunnelCfgTable | not-accessible | current | |
| 1.3.6.1.4.1.65000.1.1.1 | RowrcMplsTETunnelCfgEntry | not-accessible | current | An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signalling pr… |
| 1.3.6.1.4.1.65000.1.1.1.1 | ColumnrcMplsTETunnelCfgTunnelID | not-accessible | current | Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by re… |
| 1.3.6.1.4.1.65000.1.1.1.2 | ColumnrcMplsTETunnelCfgEgressLSRId | read-create | current | Identity of the egress LSR associated with this tunnel instance. |
| 1.3.6.1.4.1.65000.1.1.1.3 | ColumnrcMplsTETunnelCfgSetupPrio | read-create | current | Indicates the setup priority of this tunnel. |
| 1.3.6.1.4.1.65000.1.1.1.4 | ColumnrcMplsTETunnelCfgHoldingPrio | read-create | current | Indicates the holding priority for this tunnel. |
| 1.3.6.1.4.1.65000.1.1.1.5 | ColumnrcMplsTETunnelCfgRecordRoute | read-create | current | If this object is true, then it enables the RecordRoute. |
| 1.3.6.1.4.1.65000.1.1.1.6 | ColumnrcMplsTETunnelCfgBandwidth | read-create | current | The bandwidth of this tunnel. |
| 1.3.6.1.4.1.65000.1.1.1.7 | ColumnrcMplsTETunnelCfgExplicitPathName | read-create | current | The explicit path name of the tunnel master lsp used. |
| 1.3.6.1.4.1.65000.1.1.1.8 | ColumnrcMplsTETunnelCfgExplicitPathID | read-create | current | The explicit path id of the tunnel master lsp used. |
| 1.3.6.1.4.1.65000.1.1.1.9 | ColumnrcMplsTETunnelCfgHSB | read-create | current | If this object is true, then it enables the hot standby. |
| 1.3.6.1.4.1.65000.1.1.1.10 | ColumnrcMplsTETunnelCfgHSBExplicitPathName | read-create | current | The explicit path name of the tunnel hot standby lsp used. |
| 1.3.6.1.4.1.65000.1.1.1.11 | ColumnrcMplsTETunnelCfgHSBExplicitPathID | read-create | current | The explicit path id of the tunnel hot standby lsp used. |
| 1.3.6.1.4.1.65000.1.1.1.12 | ColumnrcMplsTETunnelCfgRowSta | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.65000.1.2 | TablercMplsTEPathOptCfgTable | not-accessible | current | |
| 1.3.6.1.4.1.65000.1.2.1 | RowrcMplsTEPathOptCfgEntry | not-accessible | current | |
| 1.3.6.1.4.1.65000.1.2.1.1 | ColumnrcMplsTEPathOptCfgTunnelID | not-accessible | current | The index of path option which equals to tunnel id. |
| 1.3.6.1.4.1.65000.1.2.1.2 | ColumnrcMplsTEPathOptCfgNumber | not-accessible | current | Secondary index whitch identifies the configure value of path option . |
| 1.3.6.1.4.1.65000.1.2.1.3 | ColumnrcMplsTEPathOptCfgPathType | read-create | current | If this value is dynamic ,indicates that user only specify the source and destination of the path and the CSPF will calculate the remainder of the path. If thi… |
| 1.3.6.1.4.1.65000.1.2.1.4 | ColumnrcMplsTEPathOptCfgExpPathName | read-create | current | The name of Path Option.If the type of Path Option is dynamic,then this value is '1'; if the type is explicitId or explicitName,then this value is a number or … |
| 1.3.6.1.4.1.65000.1.2.1.5 | ColumnrcMplsTEPathOptCfgExpPathID | read-create | current | The name of Path Option.If the type of Path Option is dynamic,then this value is '1'; if the type is explicitId or explicitName,then this value is a number or … |
| 1.3.6.1.4.1.65000.1.2.1.6 | ColumnrcMplsTEPathOptCfgRowSta | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.65000.1.3 | TablercMplsTEExplicitPathNameCfgTable | not-accessible | current | Explicit-path table is user configured,the user should specify the entire path for the tunnel to take. This path may contain strict or loose hops. Each hop alo… |
| 1.3.6.1.4.1.65000.1.3.1 | RowrcMplsTEExplicitPathNameCfgEntry | not-accessible | current | Explicit-path table entry. |
| 1.3.6.1.4.1.65000.1.3.1.1 | ColumnrcMplsTEExplicitPathNameCfgName | not-accessible | current | The index of Explicit-path table.The explicit name is a string. |
| 1.3.6.1.4.1.65000.1.3.1.2 | ColumnrcMplsTEExplicitPathNameCfgRowSta | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.65000.1.4 | TablercMplsTEExplicitPathIDCfgTable | not-accessible | current | Explicit-path table is user configured,the user should specify the entire path for the tunnel to take. This path may contain strict or loose hops. Each hop alo… |
| 1.3.6.1.4.1.65000.1.4.1 | RowrcMplsTEExplicitPathIDCfgEntry | not-accessible | current | Explicit-path table entry. |
| 1.3.6.1.4.1.65000.1.4.1.1 | ColumnrcMplsTEExplicitPathIDCfgIdentifer | not-accessible | current | The index of Explicit-path table.The explicitId is a number. |
| 1.3.6.1.4.1.65000.1.4.1.2 | ColumnrcMplsTEExplicitPathIDCfgRowSta | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.65000.1.5 | TablercMplsTEExplicitRouteNameCfgTable | not-accessible | current | |
| 1.3.6.1.4.1.65000.1.5.1 | RowrcMplsTEExplicitRouteNameCfgEntry | not-accessible | current | |
| 1.3.6.1.4.1.65000.1.5.1.1 | ColumnrcMplsTEExplicitRouteNameCfgName | not-accessible | current | The primary index of Explicit-path route table.The explicit name is a string. |
| 1.3.6.1.4.1.65000.1.5.1.2 | ColumnrcMplsTEExplicitRouteNameCfgIndex | not-accessible | current | Secondary index of Explicit-path route table.IP addr index. |
| 1.3.6.1.4.1.65000.1.5.1.3 | ColumnrcMplsTEExplicitRouteNameCfgNextIP | read-create | current | Identify the next hop IP address,This field is a displayable string in the format of 'XXX.XXX.XXX.XXX,' repeated.Example:1.1.1.1,1.1.1.2,...... |
| 1.3.6.1.4.1.65000.1.5.1.4 | ColumnrcMplsTEExplicitRouteNameCfgHopType | read-create | current | The hop type. |
| 1.3.6.1.4.1.65000.1.5.1.5 | ColumnrcMplsTEExplicitRouteNameCfgHopAttribute | read-create | current | The hop router attribute. |
| 1.3.6.1.4.1.65000.1.5.1.6 | ColumnrcMplsTEExplicitRouteNameCfgRowSta | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.65000.1.6 | TablercMplsTEExplicitRouteIDCfgTable | not-accessible | current | |
| 1.3.6.1.4.1.65000.1.6.1 | RowrcMplsTEExplicitRouteIDCfgEntry | not-accessible | current | |
| 1.3.6.1.4.1.65000.1.6.1.1 | ColumnrcMplsTEExplicitRouteIDCfgIdentifer | not-accessible | current | The primary index of Explicit-path route table.The explicitId is a number. |
| 1.3.6.1.4.1.65000.1.6.1.2 | ColumnrcMplsTEExplicitRouteIDCfgIndex | not-accessible | current | Secondary index of Explicit-path route table.IP addr index. |
| 1.3.6.1.4.1.65000.1.6.1.3 | ColumnrcMplsTEExplicitRouteIDCfgNextIP | read-create | current | Identify the next hop IP address,This field is a displayable string in the format of 'XXX.XXX.XXX.XXX,' repeated.Example:1.1.1.1,1.1.1.2,...... |
| 1.3.6.1.4.1.65000.1.6.1.4 | ColumnrcMplsTEExplicitRouteIDCfgHopType | read-create | current | The hop type. |
| 1.3.6.1.4.1.65000.1.6.1.5 | ColumnrcMplsTEExplicitRouteIDCfgHopAttribute | read-create | current | The hop router attribute. |
| 1.3.6.1.4.1.65000.1.6.1.6 | ColumnrcMplsTEExplicitRouteIDCfgRowSta | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.65000.1.7 | TablercMplsTEHotStandbyCfgTable | not-accessible | current | |
| 1.3.6.1.4.1.65000.1.7.1 | RowrcMplsTEHotStandbyCfgEntry | not-accessible | current | |
| 1.3.6.1.4.1.65000.1.7.1.1 | ColumnrcMplsTEHotStandbyCfgTunnelID | not-accessible | current | The primary index of path option which equals to tunnel id. |
| 1.3.6.1.4.1.65000.1.7.1.2 | ColumnrcMplsTEHotStandbyCfgProtOptNo | not-accessible | current | The secondary index which identifies the configure value of protected path option.Its value always is 1. |
| 1.3.6.1.4.1.65000.1.7.1.3 | ColumnrcMplsTEHotStandbyCfgPathType | read-create | current | If this value is dynamic ,indicates that user only specify the source and destination of the path and the CSPF will calculate the remainder of the path. If thi… |
| 1.3.6.1.4.1.65000.1.7.1.4 | ColumnrcMplsTEHotStandbyCfgExpPathName | read-create | current | The name of explicit path for protecting the master path. |
| 1.3.6.1.4.1.65000.1.7.1.5 | ColumnrcMplsTEHotStandbyCfgExpPathID | read-create | current | The ID of explicit path for protecting the master path. |
| 1.3.6.1.4.1.65000.1.7.1.6 | ColumnrcMplsTEHotStandbyCfgRowSta | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.65000.1.8 | TablercMplsTETunnelGroupCfgTable | not-accessible | current | |
| 1.3.6.1.4.1.65000.1.8.1 | RowrcMplsTETunnelGroupCfgEntry | not-accessible | current | |
| 1.3.6.1.4.1.65000.1.8.1.1 | ColumnrcMplsTETunnelGroupCfgPrimaryTunnelID | not-accessible | current | The index of tunnel group table which equals to primary tunnel id. |
| 1.3.6.1.4.1.65000.1.8.1.2 | ColumnrcMplsTETunnelGroupCfgSecondaryTunnelID | read-create | current | The secondary tunnel ID. |
| 1.3.6.1.4.1.65000.1.8.1.3 | ColumnrcMplsTETunnelGroupCfgRowSta | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |