MIB Viewer

RC7586-MIB

113 objects
The Structure of Management Information for the Codan enterprise. Copyright(c) 2009 All rights reserved
Imported Objects
CODAN-SMIsatcomMibs
SNMPv2-SMICounter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TCDateAndTime DisplayString TestAndIncr TEXTUAL-CONVENTION TimeInterval TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.23304.2.2Identityrc7586MIBThe Structure of Management Information for the Codan enterprise. Copyright(c) 2009 All rights reserved
1.3.6.1.4.1.23304.2.2.1Nodebuc1
1.3.6.1.4.1.23304.2.2.1.1Nodebuc1Configuration
1.3.6.1.4.1.23304.2.2.1.1.1Nodebuc1TxSettings
1.3.6.1.4.1.23304.2.2.1.1.1.1Scalarbuc1TxOnread-writecurrentSets Tx on/off. Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.1.2Scalarbuc1TxDefaultread-writecurrentSets Tx default 1-last 0-off. Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.1.3Scalarbuc1TxAttenuatorread-writecurrentSets/Gets Tx attenuation value in 1dBm steps. Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.2Nodebuc1PktProtocol
1.3.6.1.4.1.23304.2.2.1.1.2.1Scalarbuc1Protocolread-writecurrentSets/Gets packet protocol 0 - ASCII, 1 - CODAN, 2 - SAbus, 3 - Comstream, 4 - NDSatcom. Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.2.2Scalarbuc1Addressread-writecurrentSets/Gets packet address: 0-31 NDSatcom ...Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.3Nodebuc1RCSetting
1.3.6.1.4.1.23304.2.2.1.1.3.1Scalarbuc1Moderead-writecurrentSets/Gets redundancy mode 0-none, 1-warm, 2-hot. Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.3.2Scalarbuc1OnLineread-writecurrentSets/Gets redundancy mode on on/off line state. Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.4Nodebuc1Freqs
1.3.6.1.4.1.23304.2.2.1.1.4.1Scalarbuc1RFFreqread-writecurrentSets/Gets the RBUC RF frequency. Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.4.2Scalarbuc1IFFreqread-writecurrentSets/Gets the RBUC IF frequency. Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.4.3Scalarbuc1LOFreqread-writecurrentSets/Gets the RBUC LO frequency. Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.5Nodebuc1Misc
1.3.6.1.4.1.23304.2.2.1.1.5.1Scalarbuc1SerIfread-writecurrentSets/Gets serial interface - rate, length, parity, stop, terminate RS422/485. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.5.2Scalarbuc1PwrAlarmThreshread-writecurrentSets/Gets power alarm threshold. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.5.3Scalarbuc1BurstPwrThreshread-writecurrentSets/Gets burst power threshold. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.5.4Scalarbuc1RefSourceread-writecurrentSets/Gets reference source 0-external, 1-internal (Only for RBUC). **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.1.5.5Scalarbuc1LEDStateread-writecurrentSets/Gets LEDs status on/off (Only for RBUC). **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2Nodebuc1Status
1.3.6.1.4.1.23304.2.2.1.2.1Scalarbuc1PaStatusread-onlycurrentGets to 1 when PA is on. Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.2Scalarbuc1TxPowerread-onlycurrentGets Tx power format x.x dB. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.3Scalarbuc1TxBurstPowerread-onlycurrentGets Tx power. Format is x.x,y.y,z.z, where x.x is current burst power, y.y is min and z.z is max burts power. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.4Scalarbuc1Faultsread-onlycurrentGets the current fault status. Format - Bit0 PA fault, Bit1 Fan fault, Bit2 Power fault, Bit3 Temp fault, Bit4 10MHz fault, Bit5 Internal fault Bit6 LNB fault,…
1.3.6.1.4.1.23304.2.2.1.2.5Scalarbuc1LatchedFaultsread-onlycurrentGets the current latched faults. Format is same as Faults. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.1.2.6Scalarbuc1Temperatureread-onlycurrentGets the BUC temperature. Format is x.x. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.7Scalarbuc1MinMaxTemperatureread-onlycurrentGets the BUC temperature. Format is x.x,y.y where x.x is max and y.y is min temperature. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.8Scalarbuc1SystemSettingread-onlycurrentGets the current system status. Format is Bit0 - PA state, Bit1 - RS232 Tx, Bit2 - FSK Tx, Bit3 - RS485 Tx Bit4 - Redundancy mode, Bit5 - Online, Bit6..Bit7 - …
1.3.6.1.4.1.23304.2.2.1.2.9Scalarbuc1SystemPollread-onlycurrentGets the system poll status. Format is Bit0 - Fault, Bit1 - System change. Respond -1 if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.10Scalarbuc1DeviceTyperead-onlycurrentGets the device type. Format is X,Y where X is the model and Y is software version. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.11Scalarbuc1Gatewayread-onlycurrentGets the BUC gateway address (Only for RBUC). **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.12Scalarbuc1IpAddressread-onlycurrentGets the BUC IP address (Only for RBUC). **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.13Scalarbuc1MACAddressread-onlycurrentGets the BUC MAC address (Only for RBUC). **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.14Scalarbuc1Netmaskread-onlycurrentGets the BUC netmask (Only for RBUC). **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.15Scalarbuc1RefPowerread-onlycurrentGets the BUC reference power. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.16Scalarbuc1Configread-onlycurrentGets the BUC configuration. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.2.17Scalarbuc1BuildStandardread-onlycurrentGets the BUC build standard. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.1.3Nodebuc1Info
1.3.6.1.4.1.23304.2.2.1.3.1Scalarbuc1IdInforead-onlycurrentGets the module firmware revision, serial number and model. This string will have a zero length if the revision is unknown. **** No respond - message if buc1 n…
1.3.6.1.4.1.23304.2.2.1.3.2Scalarbuc1Limitsread-onlycurrentGets the limit data for the BUC. Format is: Power meter MIN/MAX , IF,RF and LO frequencies. This string will have a zero length if the revision is unknown. ***…
1.3.6.1.4.1.23304.2.2.1.3.3Scalarbuc1PktProtocolsInforead-onlycurrentGets supported packet protocols and the corresponding address ranges. **** No respond - message if buc1 not connected.
1.3.6.1.4.1.23304.2.2.2Nodebuc2
1.3.6.1.4.1.23304.2.2.2.1Nodebuc2Configuration
1.3.6.1.4.1.23304.2.2.2.1.1Nodebuc2TxSettings
1.3.6.1.4.1.23304.2.2.2.1.1.1Scalarbuc2TxOnread-writecurrentSets Tx on/off. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.1.2Scalarbuc2TxDefaultread-writecurrentSets Tx default 1-last 0-off. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.1.3Scalarbuc2TxAttenuatorread-writecurrentSets/Gets Tx attenuation value in 1dBm steps. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.2Nodebuc2PktProtocol
1.3.6.1.4.1.23304.2.2.2.1.2.1Scalarbuc2Protocolread-writecurrentSets/Gets packet protocol 0 - ASCII, 1 - CODAN, 2 - SAbus, 3 - Comstream, 4 - NDSatcom. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.2.2Scalarbuc2Addressread-writecurrentSets/Gets packet address: 0-31 NDSatcom ...Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.3Nodebuc2RCSetting
1.3.6.1.4.1.23304.2.2.2.1.3.1Scalarbuc2Moderead-writecurrentSets/Gets redundancy mode 0-none, 1-warm, 2-hot. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.3.2Scalarbuc2OnLineread-writecurrentSets/Gets redundancy mode on on/off line state. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.4Nodebuc2Freqs
1.3.6.1.4.1.23304.2.2.2.1.4.1Scalarbuc2RFFreqread-writecurrentSets/Gets the RBUC RF frequency. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.4.2Scalarbuc2IFFreqread-writecurrentSets/Gets the RBUC IF frequency. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.4.3Scalarbuc2LOFreqread-writecurrentSets/Gets the RBUC LO frequency. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.5Nodebuc2Misc
1.3.6.1.4.1.23304.2.2.2.1.5.1Scalarbuc2SerIfread-writecurrentSets/Gets serial interface - rate, length, parity, stop, terminate RS422/485. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.5.2Scalarbuc2PwrAlarmThreshread-writecurrentSets/Gets power alarm threshold. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.5.3Scalarbuc2BurstPwrThreshread-writecurrentSets/Gets burst power threshold. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.5.4Scalarbuc2RefSourceread-writecurrentSets/Gets reference source 0-external, 1-internal (Only for RBUC). **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.1.5.5Scalarbuc2LEDStateread-writecurrentSets/Gets LEDs status on/off (Only for RBUC). **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2Nodebuc2Status
1.3.6.1.4.1.23304.2.2.2.2.1Scalarbuc2PaStatusread-onlycurrentGets to 1 when PA is on. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.2Scalarbuc2TxPowerread-onlycurrentGets Tx power format x.x dB. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.3Scalarbuc2TxBurstPowerread-onlycurrentGets Tx power. Format is x.x,y.y,z.z, where x.x is current burst power, y.y is min and z.z is max burts power. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.4Scalarbuc2Faultsread-onlycurrentGets the current fault status. Format - Bit0 PA fault, Bit1 Fan fault, Bit2 Power fault, Bit3 Temp fault, Bit4 10MHz fault, Bit5 Internal fault Bit6 LNB fault,…
1.3.6.1.4.1.23304.2.2.2.2.5Scalarbuc2LatchedFaultsread-onlycurrentGets the current latched faults. Format is same as Faults. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.6Scalarbuc2Temperatureread-onlycurrentGets the BUC temperature. Format is x.x. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.7Scalarbuc2MinMaxTemperatureread-onlycurrentGets the BUC temperature. Format is x.x,y.y where x.x is max and y.y is min temperature. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.8Scalarbuc2SystemSettingread-onlycurrentGets the current system status. Format is Bit0 - PA state, Bit1 - RS232 Tx, Bit2 - FSK Tx, Bit3 - RS485 Tx Bit4 - Redundancy mode, Bit5 - Online, Bit6..Bit7 - …
1.3.6.1.4.1.23304.2.2.2.2.9Scalarbuc2SystemPollread-onlycurrentGets the system poll status. Format is Bit0 - Fault, Bit1 - System change. Respond -1 if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.10Scalarbuc2DeviceTyperead-onlycurrentGets the device type. Format is X,Y where X is the model and Y is software version. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.11Scalarbuc2Gatewayread-onlycurrentGets the BUC gateway address (Only for RBUC). **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.12Scalarbuc2IpAddressread-onlycurrentGets the BUC IP address (Only for RBUC). **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.13Scalarbuc2MACAddressread-onlycurrentGets the BUC MAC address (Only for RBUC). **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.14Scalarbuc2Netmaskread-onlycurrentGets the BUC netmask (Only for RBUC). **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.15Scalarbuc2RefPowerread-onlycurrentGets the BUC reference power. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.16Scalarbuc2Configread-onlycurrentGets the BUC configuration. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.2.17Scalarbuc2BuildStandardread-onlycurrentGets the BUC build standard. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.2.3Nodebuc2Info
1.3.6.1.4.1.23304.2.2.2.3.1Scalarbuc2IdInforead-onlycurrentGets the module firmware revision, serial number and model. This string will have a zero length if the revision is unknown. **** No respond - message if buc2 n…
1.3.6.1.4.1.23304.2.2.2.3.2Scalarbuc2Limitsread-onlycurrentGets the limit data for the BUC. Format is: Power meter MIN/MAX , IF,RF and LO frequencies. This string will have a zero length if the revision is unknown. ***…
1.3.6.1.4.1.23304.2.2.2.3.3Scalarbuc2PktProtocolsInforead-onlycurrentGets supported packet protocols and the corresponding address ranges. **** No respond - message if buc2 not connected.
1.3.6.1.4.1.23304.2.2.3Nodectrl
1.3.6.1.4.1.23304.2.2.3.1Nodesettings
1.3.6.1.4.1.23304.2.2.3.1.1ScalaroperationalModeread-writecurrentSets 7586 operational mode - Auto, Manual Stream1, Stream2.
1.3.6.1.4.1.23304.2.2.3.1.2ScalaronlineStreamread-writecurrentSets the online stream.
1.3.6.1.4.1.23304.2.2.3.1.3ScalarwaveguideSwitchread-writecurrentSets Waveguide switch Rx+Tx, Rx/Tx and Tx Only.
1.3.6.1.4.1.23304.2.2.3.1.4ScalarstartupTimeread-writecurrentSets Startup time.
1.3.6.1.4.1.23304.2.2.3.1.5ScalarlnbCurrentLimitread-writecurrentSets LNB current limits.
1.3.6.1.4.1.23304.2.2.3.1.6ScalarledStateread-writecurrentSets 7586 LED.
1.3.6.1.4.1.23304.2.2.3.1.7ScalarrefSourceread-writecurrentSets 7586 reference state.
1.3.6.1.4.1.23304.2.2.3.1.8ScalarrefTrimread-writecurrentSets 7586 reference trim.
1.3.6.1.4.1.23304.2.2.3.1.9ScalarrefThreshread-writecurrentSets 7586 reference alarm treshold.
1.3.6.1.4.1.23304.2.2.3.1.10ScalarrefPwrread-onlycurrentGets 7586 reference power.
1.3.6.1.4.1.23304.2.2.3.1.11ScalaripAddrread-onlycurrentGets the 7586 IP address.
1.3.6.1.4.1.23304.2.2.3.1.12ScalarmacAddressread-onlycurrentGets the 7586 MAC address.
1.3.6.1.4.1.23304.2.2.3.1.13Scalarnetmaskread-onlycurrentGets the 7586 netmask.
1.3.6.1.4.1.23304.2.2.3.1.14Scalargatewayread-onlycurrentGets the 7586 gateway address.
1.3.6.1.4.1.23304.2.2.3.2Nodestatus
1.3.6.1.4.1.23304.2.2.3.2.1ScalarlnbCurrentread-onlycurrentSets 7586 LNB current.
1.3.6.1.4.1.23304.2.2.3.2.2ScalarlnbVoltageread-onlycurrentSets 7586 LNB voltage.
1.3.6.1.4.1.23304.2.2.3.2.3Scalarfaultsread-onlycurrentGets the current fault status.
1.3.6.1.4.1.23304.2.2.3.3Nodeinfo
1.3.6.1.4.1.23304.2.2.3.3.1ScalaridInforead-onlycurrentGets the module firmware revision, serial number and model. This string will have a zero length if the revision is unknown.
Type Definitions
NameSyntaxStatusDescription
ComponentRevisionDisplayString(SIZE(2))currentThe hex value in the first octet - xx - represents the major revision no. and the hex value in the second octet - yy - represents the minor revision no.
FaultStatus7586BITS { dc1fault(0), dc2fault(1), buc1fault(2), buc2fault(3), lnb1fault(4), lnb2fault(5), txswfault(6), rxswfault(7), internalfault(8), ref10mhzfault(9) }currentDescribes all the possible faults in the system as a bit pattern.