RDN-CMTS-MIB
197 objects
This is the enterprise MIB Module for Motorola's Cable Modem Termination Systems (CMTS). Copyright (C) 2000, 2008 by Motorola, Inc. All rights reserved.
Imported Objects
| DOCS-IF-MIB | docsIfCmtsCmStatusDocsisRegMode docsIfCmtsCmStatusEntry docsIfCmtsCmStatusIndex docsIfCmtsCmStatusIpAddress docsIfCmtsCmStatusMacAddress docsIfDownChannelId docsIfUpChannelId DocsisQosVersion DocsisUpstreamType TenthdB TenthdBmV |
| DOCS-IF3-MIB | -- rfc4546 docsIf3CmtsCmRegStatusIPv6Addr IfDirection |
| DOCS-QOS3-MIB | docsQosServiceClassName |
| DOCS-SUBMGT-MIB | mib IpV4orV6Addr |
| IF-MIB | ifAdminStatus ifDescr ifIndex ifOperStatus ifType InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressIPv6 InetAddressType InetPortNumber |
| RDN-CABLE-SPECTRUM-GROUP-MIB | mib rdnSpectrumGroupName |
| RDN-MIB | riverdelta |
| RDN-PKTCABLE-GROUP-MIB | rdnPktDQoSClassName |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4981.2 | IdentityrdnCmtsMib | This is the enterprise MIB Module for Motorola's Cable Modem Termination Systems (CMTS). Copyright (C) 2000, 2008 by Motorola, Inc. All rights reserved. | ||
| 1.3.6.1.4.1.4981.2.1 | NoderdnCmtsIfObjects | |||
| 1.3.6.1.4.1.4981.2.1.1 | TablerdnCmtsDownstreamChannelTable | not-accessible | current | This table describes the attributes of downstream channel in addition to those specified by the docsIfMib. |
| 1.3.6.1.4.1.4981.2.1.1.1 | RowrdnCmtsDownstreamChannelEntry | not-accessible | current | An entry provides a list of attributes for a single Downstream channel. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(12… |
| 1.3.6.1.4.1.4981.2.1.1.1.1 | ColumnrdnCmtsDSModulation | read-write | current | The attribute to control the down stream modulation. When this object is set to FALSE(2), the downstream transmitter will output a CW, or tonal signal at the t… |
| 1.3.6.1.4.1.4981.2.1.2 | TablerdnCmtsUpstreamChannelTable | not-accessible | current | This table describes the attributes of upstream channel in addition to those specified by the docsIfMib. |
| 1.3.6.1.4.1.4981.2.1.2.1 | RowrdnCmtsUpstreamChannelEntry | not-accessible | current | List of attributes for a single upstream channel. An entry in this table exists for each ifEntry with an ifType of docsCableUpstreamInterface (129) for DOCSIS1… |
| 1.3.6.1.4.1.4981.2.1.2.1.1 | ColumnrdnCmtsUSNominalRxPower | read-write | current | The attribute to program the target, or nominal, receive power of each upstream RF port. The range is channel width dependent: Power Level Channel Width -160,+… |
| 1.3.6.1.4.1.4981.2.1.2.1.2 | ColumnrdnCmtsUSNominalRxPowerMode | read-write | current | This object describes the setting mode for rdnCmtsUSNomialRxPower. The default setting is the absolute mode. |
| 1.3.6.1.4.1.4981.2.1.2.1.3 | ColumnrdnCmtsUSInvitedRangingInterval | read-write | current | To fix Invited(Periodic) Ranging Intervals as in input to the Bandwidth Allocator algorithm. |
| 1.3.6.1.4.1.4981.2.1.2.1.4 | ColumnrdnCmtsUSRangingResponseControl | read-write | current | The attribute to force all RNG-Resp messages to issue a 'Continue' Ranging Status indefinitely regardless of timing, power, etc. accuracy of previous incoming … |
| 1.3.6.1.4.1.4981.2.1.2.1.5 | ColumnrdnCmtsUSRangingPowerOverride | read-write | current | The attribute overrides upstream power adjustments performed by the CMTS to CM's. When this object is set to TRUE(1), the override is activated, all Ranging Re… |
| 1.3.6.1.4.1.4981.2.1.2.1.6 | ColumnrdnCmtsUSTotalModemCount | read-only | current | When read, this object returns the total number of Cable Modems per upstream. |
| 1.3.6.1.4.1.4981.2.1.2.1.7 | ColumnrdnCmtsUSRegisteredModemCount | read-only | current | When read, this object returns the number of registered Cable Modems per upstream. |
| 1.3.6.1.4.1.4981.2.1.2.1.8 | ColumnrdnCmtsUSUnregisteredModemCount | read-only | current | When read, this object returns the number of unregistered Cable Modems per upstream. This count reflects modems that are in the process of attempting to join t… |
| 1.3.6.1.4.1.4981.2.1.2.1.9 | ColumnrdnCmtsUSOfflineModemCount | read-only | current | When read, this object returns the number of offline Cable Modems per upstream. |
| 1.3.6.1.4.1.4981.2.1.3 | NoderdnCmtsStpObjects | |||
| 1.3.6.1.4.1.4981.2.1.3.1 | ScalarrdnCmtsStpEnable | read-write | current | This object controls the activation of DOCSIS Spanning Tree Protocol Bridging functionality. The Spanning Tree Bridging is disabled/enabled by setting this obj… |
| 1.3.6.1.4.1.4981.2.1.3.2 | ScalarrdnCmtsStpTCNEnable | read-write | current | This object controls the generation of Topology Change Notification messages for DOCSIS Spanning Tree Protocol Bridge. |
| 1.3.6.1.4.1.4981.2.1.4 | TablerdnCmtsLinkUpDownTrapEnableTable | not-accessible | current | This table has the object to enable or disable the generation of proprietary CMTS LinkUp and Link Down traps |
| 1.3.6.1.4.1.4981.2.1.4.1 | RowrdnCmtsLinkUpDownTrapEnableEntry | not-accessible | current | An entry in this table exists for each ifEntry with an ifType of docsCableUpstream(129) or docsCableUpstreamChannel(205). |
| 1.3.6.1.4.1.4981.2.1.4.1.1 | ColumnrdnCmtsLinkUpDownTrapEnable | read-write | current | Indicates whether rdnCmtsUpstreamIfLinkUpTrap and rdnCmtsUpstreamIfLinkDownTrap traps should be generated for this interface. By default, this object has the v… |
| 1.3.6.1.4.1.4981.2.2 | NoderdnCmtsMiscObjects | |||
| 1.3.6.1.4.1.4981.2.2.1 | ScalarrdnCmtsSaveConfig | read-write | current | This object when set to TRUE will save the current configuration of the CMTS. When this object is read it will return FALSE |
| 1.3.6.1.4.1.4981.2.2.2 | ScalarrdnCmtsCmResetByMacAddr | read-write | current | The CM MAC address that the operator wants to reset. When this object is set, it will cause the CMTS to reset that CM. When this object is read it will return … |
| 1.3.6.1.4.1.4981.2.2.3 | ScalarrdnCmtsCmResetByIpAddr | read-write | current | The CM IP address that the operator wants to reset. When this object is set, it will cause the CMTS to reset that CM. When this object is read it will return z… |
| 1.3.6.1.4.1.4981.2.2.4 | ScalarrdnCmtsCmResetAll | read-write | current | This object when set to TRUE will cause the CMTS to reset all the CM that are registered with this CMTS. When this object is read it will return FALSE |
| 1.3.6.1.4.1.4981.2.2.5 | ScalarrdnCmtsHostAuthControl | read-write | obsolete | This object is used to add or delete entry in CMTS host authorization table. The first octet is for action, add (1) or delete (2), the rest are composed with C… |
| 1.3.6.1.4.1.4981.2.2.6 | ScalarrdnCmtsModemAgingTimer | read-write | current | The Time in minutes of modem inactivity after which the modem is deleted from the registration table. The minimum is 10 minutes and the maximum is 21 days. A v… |
| 1.3.6.1.4.1.4981.2.2.7 | NoderdnCmtsCpeToCmObject | |||
| 1.3.6.1.4.1.4981.2.2.7.1 | TablerdnCmtsCpeToCmTable | not-accessible | current | This table describes the mapping between CPE's MAC address and MAC address of the cable modem these CPEs are attached to. This table does not support the walk/… |
| 1.3.6.1.4.1.4981.2.2.7.1.1 | RowrdnCmtsCpeToCmEntry | not-accessible | current | An entry describes the mapping between one CPE's MAC address and MAC address of the cable modem this CPE is attached to. |
| 1.3.6.1.4.1.4981.2.2.7.1.1.1 | ColumnrdnCmtsCpeMac | not-accessible | current | This object is the MAC address of the CPE (host) that a cable modem is attached to. |
| 1.3.6.1.4.1.4981.2.2.7.1.1.2 | ColumnrdnCmtsCmMac | read-only | current | This object returns the MAC address of the cable modem that a CPE (host) is attached to. If the CPE is not found being attached to any cable modem registered o… |
| 1.3.6.1.4.1.4981.2.2.8 | TablerdnIfCmtsCmStatusTable | not-accessible | current | This table is an extension of the docsIfCmtsCmStatusTable. It provides additional information about the CM. |
| 1.3.6.1.4.1.4981.2.2.8.1 | RowrdnIfCmtsCmStatusEntry | not-accessible | current | Each entry of the table rdnIfCmtsCmStatusTable. Each entry provides some additional information about the CM. |
| 1.3.6.1.4.1.4981.2.2.8.1.1 | ColumnrdnIfCmtsCmStatusRegistrationTime | read-only | current | When read, this object will return the time in seconds since the modem registered. If the modem is unregistered, it will return ZERO |
| 1.3.6.1.4.1.4981.2.2.8.1.2 | ColumnrdnIfCmtsCmStatusTxUnicastKbytes | read-only | current | When read, this object will return the number of unicast KBytes (1024 bytes) the CMTS has transmitted to the modem (Downstream direction). For offline modems t… |
| 1.3.6.1.4.1.4981.2.2.8.1.3 | ColumnrdnIfCmtsCmStatusRxUnicastKbytes | read-only | current | When read, this object will return the number of unicast KBytes (1024 bytes) the CMTS has received from the modem (Upstream direction). For offline modems this… |
| 1.3.6.1.4.1.4981.2.2.8.1.4 | ColumnrdnIfCmtsCmStatusTxUnicastExtKbytes | read-only | current | When read, this object will return the number of unicast KBytes (1024 bytes) the CMTS has transmitted to the modem (Downstream direction). For offline modems t… |
| 1.3.6.1.4.1.4981.2.2.8.1.5 | ColumnrdnIfCmtsCmStatusRxUnicastExtKbytes | read-only | current | When read, this object will return the number of unicast KBytes (1024 bytes) the CMTS has received from the modem (Upstream Direction). For offline modems this… |
| 1.3.6.1.4.1.4981.2.2.8.1.6 | ColumnrdnIfCmtsCmStatusSpectrumGroupName | read-only | current | When read, this object will return the spectrum group name. If data not available, return NULL string |
| 1.3.6.1.4.1.4981.2.2.8.1.7 | ColumnrdnIfCmtsCmStatusUpstreamPort | read-only | current | The Upstream Port Number the modem is using. For offline modems this value is meaningless. |
| 1.3.6.1.4.1.4981.2.2.8.1.8 | ColumnrdnIfCmtsCmStatusDownStreamPort | read-only | current | The downstream port number the modem is using, For offline modems this value is meaningless. |
| 1.3.6.1.4.1.4981.2.2.8.1.9 | ColumnrdnIfCmtsCmStatusValue | read-only | current | Current Cable Modem connectivity state. Returned status information is the CM status as assumed by the CMTS, and indicates the following events: init-o(1) Opti… |
| 1.3.6.1.4.1.4981.2.2.8.1.10 | ColumnrdnIfCmtsCmStatusDSBondingGroupId | read-only | current | The downstream channel bonding group ID of primary service flow. This value is zero if not registered for channel bonding. |
| 1.3.6.1.4.1.4981.2.2.8.1.11 | ColumnrdnIfCmtsCmStatusOnlineTimes | read-only | current | Number of times a modem has gone from offline to online since the modem was first seen ranging. |
| 1.3.6.1.4.1.4981.2.2.8.1.12 | ColumnrdnIfCmtsCmStatusPercentOnline | read-only | current | A percentage of time the modem has been in an online state since the modem was first seen ranging. This value is displayed as (percent value x 100) in order to… |
| 1.3.6.1.4.1.4981.2.2.8.1.13 | ColumnrdnIfCmtsCmStatusMinOnlineTime | read-only | current | Shortest period of time this modem has been online since the modem was first seen ranging. |
| 1.3.6.1.4.1.4981.2.2.8.1.14 | ColumnrdnIfCmtsCmStatusAvgOnlineTime | read-only | current | Average period of time this modem has been online since the modem was first seen ranging. |
| 1.3.6.1.4.1.4981.2.2.8.1.15 | ColumnrdnIfCmtsCmStatusMaxOnlineTime | read-only | current | Longest period of time this modem has been online since the modem was first seen ranging. |
| 1.3.6.1.4.1.4981.2.2.8.1.16 | ColumnrdnIfCmtsCmStatusMinOfflineTime | read-only | current | Shortest period of time this modem has been offline since the modem was first seen ranging. |
| 1.3.6.1.4.1.4981.2.2.8.1.17 | ColumnrdnIfCmtsCmStatusAvgOfflineTime | read-only | current | Average period of time this modem has been offline since the modem was first seen ranging. |
| 1.3.6.1.4.1.4981.2.2.8.1.18 | ColumnrdnIfCmtsCmStatusMaxOfflineTime | read-only | current | Longest period of time this modem has been offline since the modem was first seen ranging. |
| 1.3.6.1.4.1.4981.2.2.9 | ScalarrdnModemDeregReason | read-only | current | Modem Deregistration Reason normal - the CMTS has lost contact with the modem. operatorReset - reset by the operator operatorDisabled - operator has disabled t… |
| 1.3.6.1.4.1.4981.2.2.11 | ScalarrdnModemRegIndex | read-only | current | This is place holder for CMId which is the index to the CM table. This table WILL contain the CM information. Right now the table is not implemented yet. When … |
| 1.3.6.1.4.1.4981.2.2.12 | TablerdnCmToCpeTable | not-accessible | current | This table provides the information about the CPEs attached to the CM. |
| 1.3.6.1.4.1.4981.2.2.12.1 | RowrdnCmToCpeEntry | not-accessible | current | An entry of the table rdnCmToCpeTable. Each entry provides the CPE Mac and IP addresses. |
| 1.3.6.1.4.1.4981.2.2.12.1.1 | ColumnrdnCmToCpeIndex | not-accessible | current | Index Value for an individual CPE, This index value is not guaranteed to remain same during CMTS uptime. |
| 1.3.6.1.4.1.4981.2.2.12.1.2 | ColumnrdnCmToCpeMacAddress | read-only | current | The Mac Address of the CPE attached to the CM |
| 1.3.6.1.4.1.4981.2.2.12.1.3 | ColumnrdnCmToCpeIpAddress | read-only | current | The IP Address of the CPE attached to the CM |
| 1.3.6.1.4.1.4981.2.2.12.1.4 | ColumnrdnCmToCpeIPv6Addr | read-only | current | This attribute represents the IPv6 address of the CPE. If the CPE has no IPv6 address assigned, or the Internet address is unknown, the value of this attribute… |
| 1.3.6.1.4.1.4981.2.2.13 | ScalarrdnCmtsCmRegisteredTrapEnable | read-write | current | This object controls SNMP traps for CM registration and deregistration traps (rdnCmtsCmRegisteredNotification and rdnCmtsCmDeregisteredNotification). If its va… |
| 1.3.6.1.4.1.4981.2.2.14 | ScalarrdnCmtsCardType | read-write | current | This object toggles the CMTS card type between Domestic and Japan. When set to Japan card type, upstream frequency range of the CMTS card will change from 10MH… |
| 1.3.6.1.4.1.4981.2.2.15 | TablerdnRQueryCmtsCmStatusTable | not-accessible | current | The Remote Query feature allows the BSR to act as an SNMP Manager, periodically collecting statistics from cable modems, using SNMP get/next requests. The rdnR… |
| 1.3.6.1.4.1.4981.2.2.15.1 | RowrdnRQueryCmtsCmStatusEntry | not-accessible | current | An entry in the rdnRQueryCmtsCmStatusTable. Each entry represents a set physical-layer status values for a specific cable modem. The table is indexed by a DOCS… |
| 1.3.6.1.4.1.4981.2.2.15.1.1 | ColumnrdnRQueryCmtsCmDownChannelPower | read-only | current | The last polled value of the CM's docsIfdownChannelPower MIB object, the received downstream power level at the CM, in TenthdbMv. DOCSIS specifies this to be b… |
| 1.3.6.1.4.1.4981.2.2.15.1.2 | ColumnrdnRQueryCmStatusTxPower | read-only | current | The last polled value of the CM's docsIfCmStatusTxPower MIB object, the CMs upstream transmit power level, in TenthdBmv. DOCSIS specifies this to be between 8.… |
| 1.3.6.1.4.1.4981.2.2.15.1.3 | ColumnrdnRQueryUpChannelTxTimingOffset | read-only | current | The last polled value of the CM's docsIfUpChannelTxTimingOffset MIB object. This is the CM's estimate of the current round trip time obtained from the ranging … |
| 1.3.6.1.4.1.4981.2.2.15.1.4 | ColumnrdnRQuerySigQSignalNoise | read-only | current | The last polled value of the CM's docsIfSigQSignalNoise MIB object, the downstream signal to noise ratio in TenthdB. |
| 1.3.6.1.4.1.4981.2.2.15.1.5 | ColumnrdnRQuerySigQMicroreflections | read-only | current | The last polled value of the CM's docsIfSigQMicroreflections MIB object, which is its estimate of the total microreflections including in-channel responses per… |
| 1.3.6.1.4.1.4981.2.2.15.1.6 | ColumnrdnRQueryPollTime | read-only | current | The value of sysUpTime at the time when the rdnRQueryCmtsCmStatusTable values for this CM were last polled. |
| 1.3.6.1.4.1.4981.2.2.16 | ScalarrdnUgsStatsWindow | read-write | current | The sliding, sampling time window to collect statistics for the rdnServiceClassStatsTable. This timer interval is global, applying to all service classes and c… |
| 1.3.6.1.4.1.4981.2.2.17 | TablerdnCableUgsStatsTable | not-accessible | current | This table contains statistics summarizing UGS flows per CMTS slot/port on the BSR. |
| 1.3.6.1.4.1.4981.2.2.17.1 | RowrdnCableUgsStatsEntry | not-accessible | current | A row in the rdnCableUgsStatsTable. Each row contains a set of statistics, totaled for all UGS flows on a particular upstream port. The table is indexed by val… |
| 1.3.6.1.4.1.4981.2.2.17.1.1 | ColumnrdnCableUgsStatsSlot | read-only | current | The physical chasis slot number relative to the containing card or chassis, to which this row of UGS statistics is applying. |
| 1.3.6.1.4.1.4981.2.2.17.1.2 | ColumnrdnCableUgsStatsPort | read-only | current | Chassis port number, on the associated card, to which this row of UGS statistics is applying. |
| 1.3.6.1.4.1.4981.2.2.17.1.3 | ColumnrdnCableUgsCurrentTotalFlows | read-only | current | Snap shot of the current, total number of UGS flows that are active, for the associated ifIndex. |
| 1.3.6.1.4.1.4981.2.2.17.1.4 | ColumnrdnCableUgsMaxFlowsLastFiveMinutes | read-only | current | Maximum number of UGS flows that were active, during the last 5 minutes, for the associated ifIndex. |
| 1.3.6.1.4.1.4981.2.2.17.1.5 | ColumnrdnCableUgsAvFlowsLastFiveMinutes | read-only | current | Average number of UGS flows that were active, during the last 5 minutes, for the associated ifIndex. |
| 1.3.6.1.4.1.4981.2.2.17.1.6 | ColumnrdnCableUgsMinFlowsLastFiveMinutes | read-only | current | Minimum number of UGS flows that were active, during the last 5 minutes, for the associated ifIndex. |
| 1.3.6.1.4.1.4981.2.2.17.1.7 | ColumnrdnCableUgsMaxFlowsLastWindow | read-only | current | Maximum number of UGS flows that were active, during the rdnUgsStatsWindow, for the associated ifIndex. |
| 1.3.6.1.4.1.4981.2.2.17.1.8 | ColumnrdnCableUgsAvFlowsLastWindow | read-only | current | Average number of UGS flows that were active, during the rdnUgsStatsWindow, for the associated ifIndex. |
| 1.3.6.1.4.1.4981.2.2.17.1.9 | ColumnrdnCableUgsMinFlowsLastWindow | read-only | current | Minimum number of UGS flows that were active, during the rdnUgsStatsWindow, for the associated ifIndex interface. |
| 1.3.6.1.4.1.4981.2.2.17.1.10 | ColumnrdnCableUgsResetStats | read-write | current | A 'set' of this object to TRUE(1) will cause all statistics in the row to be reset to zero. This object will always return FALSE(2) when read. |
| 1.3.6.1.4.1.4981.2.2.18 | TablerdnServiceClassStatsTable | not-accessible | current | This table contains statistics summarizing non-bonded flows within Service Classes on the BSR. |
| 1.3.6.1.4.1.4981.2.2.18.1 | RowrdnServiceClassStatsEntry | not-accessible | current | A row in the rdnServiceClassStatsTable. Each row contains a set of statistics related to flows within a particular service class, and associated with a particu… |
| 1.3.6.1.4.1.4981.2.2.18.1.1 | ColumnrdnServiceClassStatsIfDirection | read-only | current | Specifies whether the associated service class template applies to upstream or downstream service flows. |
| 1.3.6.1.4.1.4981.2.2.18.1.2 | ColumnrdnServiceClassStatsSlot | read-only | current | The physical chasis slot number relative to the containing card or chassis, to which this row of service class statistics is applying. |
| 1.3.6.1.4.1.4981.2.2.18.1.3 | ColumnrdnServiceClassStatsPort | read-only | current | Chassis port number, on the associated card, to which this row of service class statistics is applying. |
| 1.3.6.1.4.1.4981.2.2.18.1.4 | ColumnrdnServiceClassStatsTotalPackets | read-only | current | Count of total packets that have been transmitted, for the associated ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.18.1.5 | ColumnrdnServiceClassStatsTotalBytes | read-only | current | Count of total bytes that have been transmitted, for the associated ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.18.1.6 | ColumnrdnServiceClassCurrentTotalFlows | read-only | current | Snap shot of the current, total number of flows that are admitted and active, for the associated ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.18.1.7 | ColumnrdnServiceClassDeferredFlows | read-only | current | Count of deferred flows for the associated ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.18.1.8 | ColumnrdnServiceClassRestrictedFlows | read-only | current | Count of restricted flows for the associated ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.18.1.9 | ColumnrdnServiceClassRejectedFlows | read-only | current | Count of rejected flows for the associated ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.18.1.10 | ColumnrdnServiceClassBandWidth | read-only | current | Admitted bandwidth, in bits per second, for this ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.18.1.11 | ColumnrdnServiceClassResetStats | read-write | current | A 'set' of this object to TRUE(1) will cause all statistics in the row to be reset to zero. This applies to BOTH non-bonded and bonded statistics for the speci… |
| 1.3.6.1.4.1.4981.2.2.19 | NoderdnCmtsServiceClassObjects | |||
| 1.3.6.1.4.1.4981.2.2.19.1 | TablerdnCmtsServiceClassTable | not-accessible | current | This table describes the set of Motorola-QoS Services in a CMTS |
| 1.3.6.1.4.1.4981.2.2.19.1.1 | RowrdnCmtsServiceClassEntry | not-accessible | current | List of attributes of private service class. |
| 1.3.6.1.4.1.4981.2.2.19.1.1.1 | ColumnrdnCmtsServiceClassName | not-accessible | current | This object is the Service Class Name. DOCSIS specifies that the maximum size is 15 printable ASCII characters with a terminating zero. The terminating Zero is… |
| 1.3.6.1.4.1.4981.2.2.19.1.1.2 | ColumnrdnCmtsServiceClassMab | read-write | current | This object is get/set Maximum Assigned Bandwidth(MAB) for specified ServiceClass. |
| 1.3.6.1.4.1.4981.2.2.19.1.1.3 | ColumnrdnCmtsServiceClassCap | read-write | current | This object is get/set Configured Active Percent(CAP) for specified ServiceClass. |
| 1.3.6.1.4.1.4981.2.2.19.1.1.4 | ColumnrdnCmtsServiceClassSchedulingPriority | read-write | current | This object is to get/set Scheduling Priority for specified ServiceClass. |
| 1.3.6.1.4.1.4981.2.2.19.1.1.5 | ColumnrdnCmtsServiceClassAdmittedBWThreshold | read-write | current | This object is to get/set Admitted Bandwidth Threshold for specified ServiceClass. |
| 1.3.6.1.4.1.4981.2.2.19.1.1.6 | ColumnrdnCmtsServiceClassAllowShare | read-write | current | This object is to get/set allow bandwidth share with other class for specified ServiceClass. |
| 1.3.6.1.4.1.4981.2.2.20 | TablerdnRQueryCmtsCmStatusExtTable | not-accessible | current | This is an extension of the rdnRQueryCmtsCmStatusTable. |
| 1.3.6.1.4.1.4981.2.2.20.1 | RowrdnRQueryCmtsCmStatusExtEntry | not-accessible | current | An entry in the rdnRQueryCmtsCmStatusExtTable. The table is indexed by a rdnRQueryCmtsCmStatusEntry. |
| 1.3.6.1.4.1.4981.2.2.20.1.1 | ColumnrdnRQuerySwCurrentVers | read-only | current | The model and software version of this CM as parsed from its sysDescr. |
| 1.3.6.1.4.1.4981.2.2.20.1.2 | ColumnrdnRQueryServerConfigFile | read-only | current | The configuration file of the modem. |
| 1.3.6.1.4.1.4981.2.2.21 | TablerdnIfCmtsCmTable | not-accessible | current | This table is an extension of the docsIfCmtsCmTable. It provides additional information about the CM. |
| 1.3.6.1.4.1.4981.2.2.21.1 | RowrdnIfCmtsCmEntry | not-accessible | current | Each entry of the table rdnIfCmtsCmTable. Each entry Provides some additional information about the CM. |
| 1.3.6.1.4.1.4981.2.2.21.1.1 | ColumnrdnIfCmtsCmMaxCpeNumber | read-write | current | The maximum number of permitted CPEs connecting to the modem. The value 0 means no maximum limit. By default maximum of 16 CPEs are allowed behind a single CM.… |
| 1.3.6.1.4.1.4981.2.2.21.1.2 | ColumnrdnIfCmtsCmCurrCpeNumber | read-only | current | The current number of CPEs connecting to the modem. The value 0 means no hosts connecting to the modem |
| 1.3.6.1.4.1.4981.2.2.23 | TablerdnIfCmtsMTAOnlyStatusTable | not-accessible | current | A set of objects in the CMTS, maintained for each MTA ONLY connected to this CMTS. |
| 1.3.6.1.4.1.4981.2.2.23.1 | RowrdnIfCmtsMTAOnlyStatusEntry | not-accessible | current | Status information for a single MTA. An entry in this table exists for each Cable Modem Only that is connected to the CMTS implementing this table. |
| 1.3.6.1.4.1.4981.2.2.23.1.1 | ColumnrdnIfCmtsMTAOnlyStatusIndex | not-accessible | current | Index value to uniquely identify an entry in this table. For an individual MTA Only, this index value should not change during CMTS uptime. |
| 1.3.6.1.4.1.4981.2.2.23.1.2 | ColumnrdnIfCmtsMTAOnlyStatusMacAddress | read-only | current | MAC address of this MTA. If the MTA has multiple MAC addresses, this is the MAC address associated with the Cable interface. |
| 1.3.6.1.4.1.4981.2.2.23.1.3 | ColumnrdnIfCmtsMTAOnlyStatusIpAddress | read-only | deprecated | IP address of this MTA. If the MTA has no IP address assigned, or the IP address is unknown, this object returns a value of 0.0.0.0. If the MTA has multiple IP… |
| 1.3.6.1.4.1.4981.2.2.23.1.4 | ColumnrdnIfCmtsMTAOnlyStatusDownChannelIfIndex | read-only | current | IfIndex of the downstream channel this MTA is connected to. If the downstream channel is unknown, this object returns a value of zero. |
| 1.3.6.1.4.1.4981.2.2.23.1.5 | ColumnrdnIfCmtsMTAOnlyStatusUpChannelIfIndex | read-only | current | IfIndex of the upstream channel this MTA is connected to. If the upstream channel is unknown, this object returns a value of zero. |
| 1.3.6.1.4.1.4981.2.2.23.1.6 | ColumnrdnIfCmtsMTAOnlyStatusRxPower | read-only | current | The receive power as perceived for upstream data from this MTA. If the receive power is unknown, this object returns a value of zero. |
| 1.3.6.1.4.1.4981.2.2.23.1.7 | ColumnrdnIfCmtsMTAOnlyStatusTimingOffset | read-only | current | A measure of the current round trip time for this MTA. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. Units are in t… |
| 1.3.6.1.4.1.4981.2.2.23.1.8 | ColumnrdnIfCmtsMTAOnlyStatusEqualizationData | read-only | current | Equalization data for this MTA. Returns an empty string if the value is unknown or if there is no equalization data available or defined. |
| 1.3.6.1.4.1.4981.2.2.23.1.9 | ColumnrdnIfCmtsMTAOnlyStatusValue | read-only | current | Current MTA connectivity state, as specified in the RF Interface Specification. Returned status information is the CM status as assumed by the CMTS, and indica… |
| 1.3.6.1.4.1.4981.2.2.23.1.10 | ColumnrdnIfCmtsMTAOnlyStatusUnerroreds | read-only | current | Codewords received without error from this MTA. |
| 1.3.6.1.4.1.4981.2.2.23.1.11 | ColumnrdnIfCmtsMTAOnlyStatusCorrecteds | read-only | current | Codewords received with correctable errors from this MTA. |
| 1.3.6.1.4.1.4981.2.2.23.1.12 | ColumnrdnIfCmtsMTAOnlyStatusUncorrectables | read-only | current | Codewords received with uncorrectable errors from this MTA. |
| 1.3.6.1.4.1.4981.2.2.23.1.13 | ColumnrdnIfCmtsMTAOnlyStatusSignalNoise | read-only | current | Signal/Noise ratio as perceived for upstream data from this MTA. If the Signal/Noise is unknown, this object returns a value of zero. |
| 1.3.6.1.4.1.4981.2.2.23.1.14 | ColumnrdnIfCmtsMTAOnlyStatusMicroreflections | read-only | current | Total microreflections including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to retu… |
| 1.3.6.1.4.1.4981.2.2.23.1.15 | ColumnrdnIfCmtsMTAOnlyStatusExtUnerroreds | read-only | current | Codewords received without error from this MTA. |
| 1.3.6.1.4.1.4981.2.2.23.1.16 | ColumnrdnIfCmtsMTAOnlyStatusExtCorrecteds | read-only | current | Codewords received with correctable errors from this MTA. |
| 1.3.6.1.4.1.4981.2.2.23.1.17 | ColumnrdnIfCmtsMTAOnlyStatusExtUncorrectables | read-only | current | Codewords received with uncorrectable errors from this MTA. |
| 1.3.6.1.4.1.4981.2.2.23.1.18 | ColumnrdnIfCmtsMTAOnlyStatusDocsisRegMode | read-only | current | Indication whether the MTA has registered using 1.0 Class of Service or 1.1 Quality of Service. This object mirrors docsIfCmtsCmStatusDocsisMode from the docsI… |
| 1.3.6.1.4.1.4981.2.2.23.1.19 | ColumnrdnIfCmtsMTAOnlyStatusModulationType | read-only | current | Indicates modulation type currently used by the MTA. Since this object specifically identifies PHY mode, the shared type is not permitted. If the upstream chan… |
| 1.3.6.1.4.1.4981.2.2.23.1.20 | ColumnrdnIfCmtsMTAOnlyStatusInetAddressType | read-only | current | The type of internet address of docsIfCmtsCmStatusInetAddress. If the MTA Internet address is unassigned or unknown, then the value of this object is unknown(0… |
| 1.3.6.1.4.1.4981.2.2.23.1.21 | ColumnrdnIfCmtsMTAOnlyStatusInetAddress | read-only | current | Internet address of this MTA. If the MTA has no Internet address assigned, or the Internet address is unknown, the value of this object is the empty string. If… |
| 1.3.6.1.4.1.4981.2.2.23.1.22 | ColumnrdnIfCmtsMTAOnlyStatusValueLastUpdate | read-only | current | The value of sysUpTime when docsIfCmtsCmStatusValue was last updated. |
| 1.3.6.1.4.1.4981.2.2.24 | TablerdnServiceClassBondingStatsTable | not-accessible | current | This table contains statistics summarizing flows within Service Classes for bonded upstreams and downstreams on the BSR. For non-bonded upstream/downstream sta… |
| 1.3.6.1.4.1.4981.2.2.24.1 | RowrdnServiceClassBondingStatsEntry | not-accessible | current | A row in the rdnServiceClassBondingStatsTable. Each row contains a set of statistics related to flows within a particular service class, and associated with a … |
| 1.3.6.1.4.1.4981.2.2.24.1.1 | ColumnrdnServiceClassBondingStatsMacIfIndex | not-accessible | current | The MAC interface index under which this downstream channel's bonding group is configured. This will be an ifType of docsCableMaclayer(127). |
| 1.3.6.1.4.1.4981.2.2.24.1.2 | ColumnrdnServiceClassBondingStatsGroupId | not-accessible | current | The downstream or upstream bonding group identifier. |
| 1.3.6.1.4.1.4981.2.2.24.1.3 | ColumnrdnServiceClassBondingStatsIfDirection | not-accessible | current | Specifies whether the associated service class template applies to downstream(1) or upstream(2) service flows. |
| 1.3.6.1.4.1.4981.2.2.24.1.4 | ColumnrdnServiceClassBondingStatsSlot | read-only | current | The physical chasis slot number relative to the containing card or chassis, to which this row of service class statistics is applying. |
| 1.3.6.1.4.1.4981.2.2.24.1.5 | ColumnrdnServiceClassBondingStatsChan | read-only | current | Channel number on the associated card, to which this row of service class statistics is applying. |
| 1.3.6.1.4.1.4981.2.2.24.1.6 | ColumnrdnServiceClassBondingCurrentTotalFlows | read-only | current | Snap shot of the current, total number of flows that are admitted and active, for the associated ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.24.1.7 | ColumnrdnServiceClassBondingDeferredFlows | read-only | current | Count of deferred flows for the associated ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.24.1.8 | ColumnrdnServiceClassBondingRestrictedFlows | read-only | current | Count of restricted flows for the associated ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.24.1.9 | ColumnrdnServiceClassBondingRejectedFlows | read-only | current | Count of rejected flows for the associated ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.24.1.10 | ColumnrdnServiceClassBondingBandWidth | read-only | current | Admitted bandwidth, in bits per second, for this ifIndex and service class. |
| 1.3.6.1.4.1.4981.2.2.25 | ScalarrdnCmtsCmResetByIpv6Addr | read-write | current | The CM IPv6 address that the operator wants to reset. When this object Is set, it will cause the CMTS to reset that CM. When this object is Read it will return… |
| 1.3.6.1.4.1.4981.2.2.26 | NoderdnCableInterceptScalars | |||
| 1.3.6.1.4.1.4981.2.2.26.1 | ScalarrdnCableInterceptAccessPermitted | read-only | current | This object provides indication whether the SNMP user or SNMP community who issued the SNMP request has access to the rdnCableInterceptTable. |
| 1.3.6.1.4.1.4981.2.2.27 | TablerdnCableInterceptTable | not-accessible | current | This table provides the information about the configured cable intercepts |
| 1.3.6.1.4.1.4981.2.2.27.1 | RowrdnCableInterceptEntry | not-accessible | current | An entry of the table rdnCableInterceptTable. The table is indexed by ifIndex and CPE MAC address. For bridged cable intercept entries the ifIndex is 0. For ro… |
| 1.3.6.1.4.1.4981.2.2.27.1.1 | ColumnrdnCableInterceptCpeMac | read-create | current | The Mac Address of the CPE being intercepted. Also being used as index. |
| 1.3.6.1.4.1.4981.2.2.27.1.2 | ColumnrdnCableInterceptCmMac | read-create | current | The Mac Address of the CM being intercepted. For bridged cable intercept entries, the MAC address of the bridged CM. For routed cable intercept entries, the oc… |
| 1.3.6.1.4.1.4981.2.2.27.1.3 | ColumnrdnCableInterceptDestination1Type | read-create | current | Type of the address of the first lawful intercept collector. Currently only IPv4 is supported. |
| 1.3.6.1.4.1.4981.2.2.27.1.4 | ColumnrdnCableInterceptDestination1Ip | read-create | current | Ip destination 1 of 3 for captured data. |
| 1.3.6.1.4.1.4981.2.2.27.1.5 | ColumnrdnCableInterceptDestination1Port | read-create | current | Port destination 1 of 3 for captured data. |
| 1.3.6.1.4.1.4981.2.2.27.1.6 | ColumnrdnCableInterceptDestination2Type | read-create | current | Type of the address of the second lawful intercept collector. Currently only IPv4 is supported. |
| 1.3.6.1.4.1.4981.2.2.27.1.7 | ColumnrdnCableInterceptDestination2Ip | read-create | current | Ip destination 2 of 3 for captured data. |
| 1.3.6.1.4.1.4981.2.2.27.1.8 | ColumnrdnCableInterceptDestination2Port | read-create | current | Port destination 2 of 3 for captured data. |
| 1.3.6.1.4.1.4981.2.2.27.1.9 | ColumnrdnCableInterceptDestination3Type | read-create | current | Type of the address of the third lawful intercept collector. Currently only IPv4 is supported. |
| 1.3.6.1.4.1.4981.2.2.27.1.10 | ColumnrdnCableInterceptDestination3Ip | read-create | current | Ip destination 3 of 3 for captured data. |
| 1.3.6.1.4.1.4981.2.2.27.1.11 | ColumnrdnCableInterceptDestination3Port | read-create | current | Port destination 3 of 3 for captured data. |
| 1.3.6.1.4.1.4981.2.2.27.1.12 | ColumnrdnCableInterceptSourceType | read-create | current | Type of the address of the source addr. Currently only IPv4 is supported |
| 1.3.6.1.4.1.4981.2.2.27.1.13 | ColumnrdnCableInterceptSourceIp | read-create | current | Source ip of intercepted data. |
| 1.3.6.1.4.1.4981.2.2.27.1.14 | ColumnrdnCableInterceptPktCnt | read-only | current | Number of packets intercepted. |
| 1.3.6.1.4.1.4981.2.2.27.1.15 | ColumnrdnCableInterceptByteCnt | read-only | current | Number of bytes intercepted. |
| 1.3.6.1.4.1.4981.2.2.27.1.16 | ColumnrdnCableInterceptRowStatus | read-create | current | Controls and reflects the status of rows in this table. This field is used to control the addition and deletion of a cable intercept entry. |
| 1.3.6.1.4.1.4981.2.2.28 | TablerdnCmtsUpChannelCounterTable | not-accessible | current | This table contains 32 bit and 64 bit IUC-1 Noise and NoEnergy mini-slots counters for upstream channels. |
| 1.3.6.1.4.1.4981.2.2.28.1 | RowrdnCmtsUpChannelCounterEntry | not-accessible | current | List of noise/collision statistics for a single upstream channel. For DOCSIS 3.0 or 2.0 CMTSs, an entry in this table exists for each ifEntry with an ifType of… |
| 1.3.6.1.4.1.4981.2.2.28.1.1 | ColumnrdnIfCmtsUpChCtrReqNoise | read-only | current | Current count, from CMTS initialization, of contention request mini-slots subjected to Noise on this upstream logical channel. This includes all contention min… |
| 1.3.6.1.4.1.4981.2.2.28.1.2 | ColumnrdnIfCmtsUpChCtrReqNoEnergy | read-only | current | Current count, from CMTS initialization, of contention request mini-slots subjected to No Energy on this upstream logical channel. This includes all contention… |
| 1.3.6.1.4.1.4981.2.2.28.1.3 | ColumnrdnIfCmtsUpChCtrExtReqNoise | read-only | current | Current count, from CMTS initialization, of contention request mini-slots for which no energy was detected on this upstream logical channel.This includes all c… |
| 1.3.6.1.4.1.4981.2.2.28.1.4 | ColumnrdnIfCmtsUpChCtrExtReqNoEnergy | read-only | current | Current count, from CMTS initialization, of contention request mini-slots for which no energy was detected on this upstream logical channel. This includes all … |
| 1.3.6.1.4.1.4981.2.4 | NoderdnCmtsMibNotifications | |||
| 1.3.6.1.4.1.4981.2.4.0 | NoderdnCmtsMibNotificationPrefix | |||
| 1.3.6.1.4.1.4981.2.4.0.1 | NotificationrdnCmtsCmRegisteredNotification | current | An event to report the registration of a modem. The values of docsDevEvLevel, docsDevId, and DocsDevEvText are from the entry which logs this event in the docs… | |
| 1.3.6.1.4.1.4981.2.4.0.2 | NotificationrdnCmtsCmDeregisteredNotification | current | An event to report the registration of a modem. The values of docsDevEvLevel, docsDevId, and DocsDevEvText are from the entry which logs this event in the docs… | |
| 1.3.6.1.4.1.4981.2.4.0.3 | NotificationrdnCmtsUpstreamIfLinkUpTrap | current | This trap provides more information than the standard linkUp trap, by adding varbinds to include the spectrum group name, ifDescr, and ifType. | |
| 1.3.6.1.4.1.4981.2.4.0.4 | NotificationrdnCmtsUpstreamIfLinkDownTrap | current | This trap provides more information than the standard linkDown trap, by adding varbinds to include the spectrum group name, ifDescr, and ifType. | |
| 1.3.6.1.4.1.4981.2.4.0.5 | NotificationrdnRQueryPollDoneNotification | current | This notification indicates that the BSR has completed a Remote Query polling cycle, collect information for all objects in the rdnRQueryCmtsCmStatusTable, for… | |
| 1.3.6.1.4.1.4981.2.4.0.6 | NotificationrdnPktDQoSAdmittedBwThresholdTrap | current | This notification indicates that the admitted bandwidth has either exceeded the admitted bandwidth threshold or cleared of the condition since it is within the… | |
| 1.3.6.1.4.1.4981.2.4.1 | NoderdnCmtsMibNotificationObjects | |||
| 1.3.6.1.4.1.4981.2.4.1.1 | ScalarrdnRQueryLastPollStartTime | read-only | current | The value of sysUpTime when the BSR last began a Remote Query polling cycle, to read values for the rdnRQueryCmtsCmStatusTable from registered cable modems. Th… |
| 1.3.6.1.4.1.4981.2.4.1.2 | ScalarrdnRQueryLastPollStopTime | read-only | current | The value of sysUpTime when the BSR last began a Remote Query polling cycle, to read values for the rdnRQueryCmtsCmStatusTable from registered cable modems. Th… |
| 1.3.6.1.4.1.4981.2.4.1.3 | ScalarrdnPktDQoSAdmittedBwThresholdReason | accessible-for-notify | current | This entry contains the rdnPktDQosAdmittedBwThresholdTrap reason code 1 = Admitted BW exceeded the admitted BW Threshold. 2 = Admitted BW cleared within the ad… |
| 1.3.6.1.4.1.4981.2.5 | NoderdnCmtsMibConformance | |||
| 1.3.6.1.4.1.4981.2.5.1 | NoderdnCmtsCompliances | |||
| 1.3.6.1.4.1.4981.2.5.1.1 | CompliancerdnCmtsMibCompliance | current | The compliance statement for entities which implement the Motorola Cable Docsis Extension (CMTS) MIB. | |
| 1.3.6.1.4.1.4981.2.5.2 | NoderdnCmtsMibGroups | |||
| 1.3.6.1.4.1.4981.2.5.2.1 | GrouprdnCmtsIfGroup | current | A collection of objects providing Motorola CMTS interface related extensions. | |
| 1.3.6.1.4.1.4981.2.5.2.2 | GrouprdnCmtsMiscGroup | current | A collection of objects providing Motorola CMTS misc option extensions. | |
| 1.3.6.1.4.1.4981.2.5.2.3 | GrouprdnCmtsNotificationsGroup | current | A collection of Motorola proprietary traps/notifications providing enhanced information concerning modem registration/deregistration, link up/down, and Remote … |