REDSTONE-ATM-MIB
48 objects
The ATM MIB for the Redstone Communications Inc. enterprise.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| REDSTONE-SMI | rsMgmt |
| REDSTONE-TC | RsNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2773.2.8 | IdentityrsAtmMIB | The ATM MIB for the Redstone Communications Inc. enterprise. | ||
| 1.3.6.1.4.1.2773.2.8.1 | NodersAtmObjects | |||
| 1.3.6.1.4.1.2773.2.8.1.1 | NodersAtmIfLayer | |||
| 1.3.6.1.4.1.2773.2.8.1.1.1 | ScalarrsAtmNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in rsAtmIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in… |
| 1.3.6.1.4.1.2773.2.8.1.1.2 | TablersAtmIfTable | not-accessible | current | This table contains entries for ATM interfaces present in the system. |
| 1.3.6.1.4.1.2773.2.8.1.1.2.1 | RowrsAtmIfEntry | not-accessible | current | Each entry describes the characteristics of an ATM interface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in i… |
| 1.3.6.1.4.1.2773.2.8.1.1.2.1.1 | ColumnrsAtmIfIndex | not-accessible | current | The ifIndex of the ATM interface. When creating entries in this table, suitable values for this object are determined by reading rsAtmNextIfIndex. |
| 1.3.6.1.4.1.2773.2.8.1.1.2.1.2 | ColumnrsAtmIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.2773.2.8.1.1.2.1.3 | ColumnrsAtmIfLowerIfIndex | read-create | current | The ifIndex of an interface over which this ATM interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that… |
| 1.3.6.1.4.1.2773.2.8.1.1.2.1.4 | ColumnrsAtmIfIlmiVpi | read-write | current | The VPI of the Ilmi of a major ATM interface. |
| 1.3.6.1.4.1.2773.2.8.1.1.2.1.5 | ColumnrsAtmIfIlmiVci | read-write | current | The VCI of the Ilmi of a major ATM interface. |
| 1.3.6.1.4.1.2773.2.8.1.1.2.1.6 | ColumnrsAtmIfIlmiVcd | read-write | current | An integer identifier for the Ilmi, used in conjunction with the command-line interface. The value must be unique among VCs configured on the same ATM interfac… |
| 1.3.6.1.4.1.2773.2.8.1.1.2.1.7 | ColumnrsAtmIfIlmiPollFrequency | read-write | current | Use to set the Interim Local Management Interface (ILMI) keepalive timer. This value sets the allowable time between POLL PDU transmissions if there are no pen… |
| 1.3.6.1.4.1.2773.2.8.1.1.2.1.8 | ColumnrsAtmIfIlmiAdminState | read-write | current | The administrative status of ILMI in the ATM interface. |
| 1.3.6.1.4.1.2773.2.8.1.1.2.1.9 | ColumnrsAtmIfUniVersion | read-write | current | Use to specify the User Network Interface (UNI) the router should use when ILMI link auto determination is unsuccesful or ILMI is disabled. |
| 1.3.6.1.4.1.2773.2.8.1.2 | NodersAtmAal5IfLayer | |||
| 1.3.6.1.4.1.2773.2.8.1.2.1 | ScalarrsAtmAal5NextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in rsAtmAal5IfTable. A GET of this object returns the next available ifIndex value to be used to create an entr… |
| 1.3.6.1.4.1.2773.2.8.1.2.2 | TablersAtmAal5IfTable | not-accessible | current | This table contains entries for ATM AAL5 interfaces present in the system. |
| 1.3.6.1.4.1.2773.2.8.1.2.2.1 | RowrsAtmAal5IfEntry | not-accessible | current | Each entry describes the characteristics of an ATM AAL5 interface. Creating/deleting entries in this table causes corresponding entries for be created /deleted… |
| 1.3.6.1.4.1.2773.2.8.1.2.2.1.1 | ColumnrsAtmAal5IfIndex | not-accessible | current | The ifIndex of the ATM AAL5 interface. When creating entries in this table, suitable values for this object are determined by reading rsAtmAal5NextIfIndex. |
| 1.3.6.1.4.1.2773.2.8.1.2.2.1.2 | ColumnrsAtmAal5IfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.2773.2.8.1.2.2.1.3 | ColumnrsAtmAal5IfLowerIfIndex | read-create | current | The ifIndex of an ATM interface over which this ATM AAL5 interface is to be layered. A value of zero indicates no layering. An implementation may choose to req… |
| 1.3.6.1.4.1.2773.2.8.1.3 | NodersAtmSubIfLayer | |||
| 1.3.6.1.4.1.2773.2.8.1.3.1 | ScalarrsAtmSubIfNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in rsAtmSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry… |
| 1.3.6.1.4.1.2773.2.8.1.3.2 | TablersAtmSubIfTable | not-accessible | current | This table contains entries for ATM Subinterfaces present in the system. |
| 1.3.6.1.4.1.2773.2.8.1.3.2.1 | RowrsAtmSubIfEntry | not-accessible | current | Each entry describes the characteristics of an ATM Subinterface. Creating/deleting entries in this table causes corresponding entries for be created /deleted i… |
| 1.3.6.1.4.1.2773.2.8.1.3.2.1.1 | ColumnrsAtmSubIfIndex | not-accessible | current | The ifIndex of the ATM Subinterface. When creating entries in this table, suitable values for this object are determined by reading rsAtmSubNextIfIndex. |
| 1.3.6.1.4.1.2773.2.8.1.3.2.1.2 | ColumnrsAtmSubIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.2773.2.8.1.3.2.1.3 | ColumnrsAtmSubIfDistinguisher | read-create | current | An integer identifier for the sub interface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The va… |
| 1.3.6.1.4.1.2773.2.8.1.3.2.1.4 | ColumnrsAtmSubIfLowerIfIndex | read-create | current | The ifIndex of an ATM AAL5 interface over which this ATM Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to … |
| 1.3.6.1.4.1.2773.2.8.1.3.3 | TablersAtmSubIfVccTable | not-accessible | current | This table contains entries for ATM VCCs configured on ATM Subinterfaces present in the system. An implementation may constrain the number of VCCs permitted to… |
| 1.3.6.1.4.1.2773.2.8.1.3.3.1 | RowrsAtmSubIfVccEntry | not-accessible | current | Each entry describes the characteristics of an ATM Subinterface VCC. |
| 1.3.6.1.4.1.2773.2.8.1.3.3.1.1 | ColumnrsAtmSubIfVccVpi | not-accessible | current | The VPI of the ATM VCC used by this subinterface. |
| 1.3.6.1.4.1.2773.2.8.1.3.3.1.2 | ColumnrsAtmSubIfVccVci | not-accessible | current | The VCI of the ATM VCC used by this subinterface. |
| 1.3.6.1.4.1.2773.2.8.1.3.3.1.3 | ColumnrsAtmSubIfVccRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.2773.2.8.1.3.3.1.4 | ColumnrsAtmSubIfVccVcd | read-create | current | An integer identifier for the circuit, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value mu… |
| 1.3.6.1.4.1.2773.2.8.1.3.3.1.5 | ColumnrsAtmSubIfVccType | read-create | current | Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. |
| 1.3.6.1.4.1.2773.2.8.1.3.3.1.6 | ColumnrsAtmSubIfVccServiceCategory | read-create | current | Service category for this circuit: ubr Unspecified bit rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-realtime Variable … |
| 1.3.6.1.4.1.2773.2.8.1.3.3.1.7 | ColumnrsAtmSubIfVccPcr | read-create | current | Peak Cell Rate, in cells per second, of this circuit. This parameter is only required when rsAtmSubIfVccServiceCategory is configured to have one of the follow… |
| 1.3.6.1.4.1.2773.2.8.1.3.3.1.8 | ColumnrsAtmSubIfVccScr | read-create | current | Sustained Cell Rate, in cells per second, of this circuit. This parameter is only required when rsAtmSubIfVccServiceCategory is configured to have one of the f… |
| 1.3.6.1.4.1.2773.2.8.1.3.3.1.9 | ColumnrsAtmSubIfVccMbs | read-create | current | Maximum Burst Size, in cells, of this circuit. This parameter is only required when rsAtmSubIfVccServiceCategory is configured to have one of the following val… |
| 1.3.6.1.4.1.2773.2.8.4 | NodersAtmConformance | |||
| 1.3.6.1.4.1.2773.2.8.4.1 | NodersAtmCompliances | |||
| 1.3.6.1.4.1.2773.2.8.4.1.1 | CompliancersAtmCompliance | current | The compliance statement for entities which implement the Redstone ATM MIB. | |
| 1.3.6.1.4.1.2773.2.8.4.2 | NodersAtmGroups | |||
| 1.3.6.1.4.1.2773.2.8.4.2.1 | GrouprsAtmGroup | current | A collection of objects providing management of ATM interfaces in a Redstone product. | |
| 1.3.6.1.4.1.2773.2.8.4.2.2 | GrouprsAtmAal5Group | current | A collection of objects providing management of AAL5 interfaces in a Redstone product. | |
| 1.3.6.1.4.1.2773.2.8.4.2.3 | GrouprsAtmSubIfGroup | current | A collection of objects providing management of ATM subinterfaces in a Redstone product. |