RETIX-SWITCHSTAKII-MIB
23 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1158-MIB | Counter enterprises Gauge IpAddress NetworkAddress TimeTicks |
| RFC1212 MISSING | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.72 | Noderetix | |||
| 1.3.6.1.4.1.72.20 | NodeswitchStakII | |||
| 1.3.6.1.4.1.72.20.1 | NodeunitProfile | |||
| 1.3.6.1.4.1.72.20.1.1 | ScalarbaseModule | read-only | mandatory | Identifies the type of main PCB installed. |
| 1.3.6.1.4.1.72.20.1.2 | Scalario1Module | read-only | mandatory | Identifies the type of card installed in the IO1 connector |
| 1.3.6.1.4.1.72.20.1.3 | Scalario2Module | read-only | mandatory | Identifies the type of card installed in the IO2 connector |
| 1.3.6.1.4.1.72.20.2 | NodebaseUnit | |||
| 1.3.6.1.4.1.72.20.2.1 | ScalarbaseBootFirmwareVersion | read-only | mandatory | Version number of current boot firmware in decimal, (i.e. V01.00 is displayed as 256) |
| 1.3.6.1.4.1.72.20.2.2 | ScalarbaseSoftwareVersion | read-only | mandatory | Version number of current software in decimal, (i.e. V01.03 is displayed as 259) |
| 1.3.6.1.4.1.72.20.2.3 | ScalarbaseErrorLog | read-write | mandatory | A stored value indicating that the unit has experienced a fault. Log information is formatted as a four digit hex number. Set to zero to clear the logged fault… |
| 1.3.6.1.4.1.72.20.3 | Nodestakbus | |||
| 1.3.6.1.4.1.72.20.3.1 | ScalarstkbusIOPort | read-only | mandatory | Represents the IO port containing a StakbusII card. Only one Stakbus card is permitted per unit |
| 1.3.6.1.4.1.72.20.3.2 | ScalarstkbusSpeed | read-only | mandatory | Speed in Mbps of the installed Stakbus (StakbusII = 175Mbps). |
| 1.3.6.1.4.1.72.20.3.3 | ScalarstkbusNodeAddress | read-only | mandatory | Address of the Stakbus interface as set on front panel dial (0..15). |
| 1.3.6.1.4.1.72.20.3.4 | ScalarstkbusRingOperationalStatus | read-only | mandatory | The status of the Retix Stakbus interface ring. |
| 1.3.6.1.4.1.72.20.4 | Nodevlan | |||
| 1.3.6.1.4.1.72.20.4.1 | NodevlanConfig | |||
| 1.3.6.1.4.1.72.20.4.1.1 | ScalarvlanEnableDisable | read-write | mandatory | Enables or Disables VLAN operation on this unit. |
| 1.3.6.1.4.1.72.20.4.1.2 | TableportVLANTable | not-accessible | mandatory | Table of port based VLAN configurations. Entries (rows) are added to the table by issuing a SET command with the EnableAdd value for the portVLANEntryEdit obje… |
| 1.3.6.1.4.1.72.20.4.1.2.1 | RowportVLANEntry | not-accessible | mandatory | This is an entry in the portVLANTable. |
| 1.3.6.1.4.1.72.20.4.1.2.1.1 | ColumnportVLANEntryPortID | read-write | mandatory | Port number for this VLAN configuration. |
| 1.3.6.1.4.1.72.20.4.1.2.1.2 | ColumnportVLANEntryVLANID | read-write | mandatory | VLAN number or ID. |
| 1.3.6.1.4.1.72.20.4.1.2.1.3 | ColumnportVLANEntryEdit | read-write | mandatory | When set to enableAdd(1) the instantiations will be used to create a new table entry (row). Existing entries can be disabled(2) or deleted (3). |