RFC1232-MIB
50 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.2 | Nodeds1 | |||
| 1.3.6.1.3.2.1 | Tableds1ConfigTable | not-accessible | mandatory | The DS1 Configuration table. |
| 1.3.6.1.3.2.1.1 | Rowds1ConfigEntry | not-accessible | mandatory | An entry in the DS1 Configuration table. |
| 1.3.6.1.3.2.1.1.1 | Columnds1CSUIndex | read-only | mandatory | The index value which uniquely identifies the CSU to which this entry is applicable. |
| 1.3.6.1.3.2.1.1.2 | Columnds1Index | read-only | mandatory | An index value that uniquely identifies an interface to a ds1. The interface identified by a particular value of this index is the same interface as identified… |
| 1.3.6.1.3.2.1.1.3 | Columnds1TimeElapsed | read-only | mandatory | The number of seconds that have elapsed since the beginning of the current error-measurement period. Any fraction is rounded up. |
| 1.3.6.1.3.2.1.1.4 | Columnds1ValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected. The value will be 96 unless the CSU device was brought online within the last 24 hours, in… |
| 1.3.6.1.3.2.1.1.5 | Columnds1LineType | read-only | mandatory | This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reaso… |
| 1.3.6.1.3.2.1.1.6 | Columnds1ZeroCoding | read-only | mandatory | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. ds1JammedBit refers the J… |
| 1.3.6.1.3.2.1.1.7 | Columnds1Loopback | read-only | mandatory | This variable represents the loopback state of the CSU. Devices supporting read/write access should return badValue in response to a requested loopback state t… |
| 1.3.6.1.3.2.1.1.8 | Columnds1SendCode | read-only | mandatory | This variable indicates what type of code is being sent across the DS1 circuit by the CSU. The values mean: ds1SendNoCode sending looped or normal data ds1Send… |
| 1.3.6.1.3.2.1.1.9 | Columnds1YellowAlarm | read-only | mandatory | This variable indicates if a Yellow Alarm condition exists. Note that G.704 interfaces do not support Yellow Alarms. Accordingly, such agents should return the… |
| 1.3.6.1.3.2.1.1.10 | Columnds1RedAlarm | read-only | mandatory | This variable indicates if a Red Alarm condition exists. Note that G.704 interfaces do not support Red Alarms. Accordingly, such agents should return the value… |
| 1.3.6.1.3.2.1.1.11 | Columnds1CircuitIdentifier | read-only | mandatory | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.3.2.2 | Tableds1IntervalTable | not-accessible | mandatory | The DS1 Interval table. |
| 1.3.6.1.3.2.2.1 | Rowds1IntervalEntry | not-accessible | mandatory | An entry in the DS1 Interval table. |
| 1.3.6.1.3.2.2.1.1 | Columnds1IntervalIndex | read-only | mandatory | The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same i… |
| 1.3.6.1.3.2.2.1.2 | Columnds1IntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minute interval (assuming that a… |
| 1.3.6.1.3.2.2.1.3 | Columnds1IntervalESs | read-only | mandatory | The counter associated with the number of Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during one of the … |
| 1.3.6.1.3.2.2.1.4 | Columnds1IntervalSESs | read-only | mandatory | The counter associated with the number of Severely Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during on… |
| 1.3.6.1.3.2.2.1.5 | Columnds1IntervalSEFSs | read-only | mandatory | The counter associated with the number of Severely Errored Framing Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU d… |
| 1.3.6.1.3.2.2.1.6 | Columnds1IntervalUASs | read-only | mandatory | The counter associated with the number of Unavailable Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during one of … |
| 1.3.6.1.3.2.2.1.7 | Columnds1IntervalCSSs | read-only | mandatory | The counter associated with the number of Controlled Slip Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during one… |
| 1.3.6.1.3.2.2.1.8 | Columnds1IntervalBPVs | read-only | mandatory | The counter associated with the number of Bipolar Violations, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during one of t… |
| 1.3.6.1.3.2.2.1.9 | Columnds1IntervalCVs | read-only | mandatory | The counter associated with the number of Code Violation Error Events, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU during… |
| 1.3.6.1.3.2.3 | Tableds1CurrentTable | not-accessible | mandatory | The DS1 Current table. |
| 1.3.6.1.3.2.3.1 | Rowds1CurrentEntry | not-accessible | mandatory | An entry in the DS1 Current table. |
| 1.3.6.1.3.2.3.1.1 | Columnds1CurrentIndex | read-only | mandatory | The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same i… |
| 1.3.6.1.3.2.3.1.2 | Columnds1CurrentESs | read-only | mandatory | The counter associated with the number of Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the current 15 … |
| 1.3.6.1.3.2.3.1.3 | Columnds1CurrentSESs | read-only | mandatory | The counter associated with the number of Severely Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the cu… |
| 1.3.6.1.3.2.3.1.4 | Columnds1CurrentSEFSs | read-only | mandatory | The counter associated with the number of Severely Errored Framing Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU i… |
| 1.3.6.1.3.2.3.1.5 | Columnds1CurrentUASs | read-only | mandatory | The counter associated with the number of Unavailable Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the current… |
| 1.3.6.1.3.2.3.1.6 | Columnds1CurrentCSSs | read-only | mandatory | The counter associated with the number of Controlled Slip Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the cur… |
| 1.3.6.1.3.2.3.1.7 | Columnds1CurrentBPVs | read-only | mandatory | The counter associated with the number of Bipolar Violations, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the current … |
| 1.3.6.1.3.2.3.1.8 | Columnds1CurrentCVs | read-only | mandatory | The counter associated with the number of Code Violation Error Events, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the… |
| 1.3.6.1.3.2.4 | Tableds1TotalTable | not-accessible | mandatory | The DS1 Total table. 24 hour interval. |
| 1.3.6.1.3.2.4.1 | Rowds1TotalEntry | not-accessible | mandatory | An entry in the DS1 Total table. |
| 1.3.6.1.3.2.4.1.1 | Columnds1TotalIndex | read-only | mandatory | The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same i… |
| 1.3.6.1.3.2.4.1.2 | Columnds1TotalESs | read-only | mandatory | The counter associated with the number of Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the previous 24… |
| 1.3.6.1.3.2.4.1.3 | Columnds1TotalSESs | read-only | mandatory | The counter associated with the number of Severely Errored Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the pr… |
| 1.3.6.1.3.2.4.1.4 | Columnds1TotalSEFSs | read-only | mandatory | The counter associated with the number of Severely Errored Framing Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU i… |
| 1.3.6.1.3.2.4.1.5 | Columnds1TotalUASs | read-only | mandatory | The counter associated with the number of Unavailable Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the previou… |
| 1.3.6.1.3.2.4.1.6 | Columnds1TotalCSSs | read-only | mandatory | The counter associated with the number of Controlled Slip Seconds, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the pre… |
| 1.3.6.1.3.2.4.1.7 | Columnds1TotalBPVs | read-only | mandatory | The counter associated with the number of Bipolar Violations, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the previous… |
| 1.3.6.1.3.2.4.1.8 | Columnds1TotalCVs | read-only | mandatory | The counter associated with the number of Code Violation Error Events, as defined by ANSI Draft Standard T1M1.3/90 - 027R2[15], encountered by a DS1 CSU in the… |
| 1.3.6.1.3.2.5 | Tableds1FracTable | not-accessible | mandatory | The DS1 Fractional table. |
| 1.3.6.1.3.2.5.1 | Rowds1FracEntry | not-accessible | mandatory | An entry in the DS1 Fractional table. |
| 1.3.6.1.3.2.5.1.1 | Columnds1FracIndex | read-only | mandatory | The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same i… |
| 1.3.6.1.3.2.5.1.2 | Columnds1FracNumber | read-only | mandatory | The channel number for this entry. |
| 1.3.6.1.3.2.5.1.3 | Columnds1FracIfIndex | read-only | mandatory | An index value that uniquely identifies an interface to a ds1. The interface identified by a particular value of this index is the same interface as identified… |