RH-ATT-MIB
184 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.74 | Nodeatt-2 | |||
| 1.3.6.1.4.1.74.1 | Nodeatt-products | |||
| 1.3.6.1.4.1.74.1.6 | Nodeatt-rh1products | |||
| 1.3.6.1.4.1.74.1.6.1 | Nodeatt-rh1xe | |||
| 1.3.6.1.4.1.74.2 | Nodeatt-mgmt | |||
| 1.3.6.1.4.1.74.2.14 | Nodeatt-rh1mgt | |||
| 1.3.6.1.4.1.74.2.14.1 | Noderh1BasicCtrlCapability | |||
| 1.3.6.1.4.1.74.2.14.1.1 | Scalarrh1BasicCtrlRackMAC | read-only | mandatory | The rack's base MAC address. By definintion it may be inferred that the next 3 consecutive MAC addresses are also assigned to this rack. This object is include… |
| 1.3.6.1.4.1.74.2.14.1.2 | Scalarrh1BasicCtrlCardCapacity | read-only | mandatory | Indicates the number of groups that can be contained within the rack. Valid range is 1-32. Within each managed rack, the groups are uniquely numbered in the ra… |
| 1.3.6.1.4.1.74.2.14.1.3 | Tablerh1BasicCtrlCardTable | not-accessible | mandatory | A list of card control entries. |
| 1.3.6.1.4.1.74.2.14.1.3.1 | Rowrh1BasicCtrlCardEntry | not-accessible | mandatory | Entry of the Basic Control Group Card table |
| 1.3.6.1.4.1.74.2.14.1.3.1.1 | Columnrh1BasicCtrlCardID | read-only | mandatory | Index into the Basic Control Card Table |
| 1.3.6.1.4.1.74.2.14.1.3.1.2 | Columnrh1BasicCtrlNumberOfPorts | read-only | mandatory | The number of ports is an 8 bit integer whose value points to the port address of the highest numbered port. For the R1 and R2 Rack MPR boards, the value is 12… |
| 1.3.6.1.4.1.74.2.14.1.4 | Tablerh1BasicCtrlPortTable | not-accessible | mandatory | A list of Basic port control entries. |
| 1.3.6.1.4.1.74.2.14.1.4.1 | Rowrh1BasicCtrlPortEntry | not-accessible | mandatory | Entry into the Basic Control Group Port table. |
| 1.3.6.1.4.1.74.2.14.1.4.1.1 | Columnrh1BasicPortCtrlCardID | read-only | mandatory | Index by card into the basic control table |
| 1.3.6.1.4.1.74.2.14.1.4.1.2 | Columnrh1BasicCtrlPortID | read-only | mandatory | Index by port into the basic control table |
| 1.3.6.1.4.1.74.2.14.1.4.1.3 | Columnrh1BasicCtrlPortType | read-only | mandatory | The type of port. All ports on a repeater are of the same type at this layer. Different port types have different delay characteristics and topological implica… |
| 1.3.6.1.4.1.74.2.14.1.4.1.4 | Columnrh1BasicCtrlPortCtrl | read-write | mandatory | The administrator settable state of this port. Indicates whether a port has been administratively disabled or whether it is in the normal, enabled state. This … |
| 1.3.6.1.4.1.74.2.14.1.4.1.5 | Columnrh1BasicCtrlAutoPartitionState | read-only | mandatory | Indicates whether the port is currently partitioned by the hub's auto-partition protection. (The Hub automatically partitions a port if it is signaling continu… |
| 1.3.6.1.4.1.74.2.14.2 | Noderh1SelfTestCapability | |||
| 1.3.6.1.4.1.74.2.14.2.1 | Scalarrh1SelfTestResetRack | read-write | mandatory | This action initializes the Rack. This reset is the software equivalent of a power up reset. This action may result in the loss of packets. |
| 1.3.6.1.4.1.74.2.14.2.2 | Scalarrh1SelfTestExecuteSelfTest1 | read-write | mandatory | Causes the Rack to initiate the non-disruptive self-test function. The hub performs a non-disruptive self-test that has the following characteristics: - The te… |
| 1.3.6.1.4.1.74.2.14.2.3 | Scalarrh1SelfTestExecuteSelfTest2 | read-write | mandatory | Causes the Rack to initiate the disruptive self-test function. The hub performs a disruptive self-test that has the following characteristics: - The test reset… |
| 1.3.6.1.4.1.74.2.14.2.4 | Scalarrh1SelfTestRackHealthState | read-only | mandatory | The health state object indicates the operational state of the rack. This object will also map to the color of the rack status LED, where state ok(2) is green,… |
| 1.3.6.1.4.1.74.2.14.2.5 | Scalarrh1SelfTestRackHealthData | read-only | mandatory | This object gives data on the health of all major rack components. The object is an octet string with a size of 103 octets broken 6 sections: Reason for trap C… |
| 1.3.6.1.4.1.74.2.14.2.6 | Tablerh1SelfTestCardTable | not-accessible | mandatory | A list of self test entries. |
| 1.3.6.1.4.1.74.2.14.2.6.1 | Rowrh1SelfTestCardEntry | not-accessible | mandatory | Entry into the Self Test Capability Card table. |
| 1.3.6.1.4.1.74.2.14.2.6.1.1 | Columnrh1SelfTestCardID | read-only | mandatory | Index into the self test card table. |
| 1.3.6.1.4.1.74.2.14.2.6.1.2 | Columnrh1SelfTestCardResetTimeStamp | read-only | mandatory | A snapshot of sysUpTime when the card was last reset. |
| 1.3.6.1.4.1.74.2.14.2.6.1.3 | Columnrh1SelfTestResetCard | read-write | mandatory | Causes a reset of all functions of the selected card. If the selected card is the rack manager, the agent and volatile information is reset. Packets may be los… |
| 1.3.6.1.4.1.74.2.14.2.6.1.4 | Columnrh1SelfTestResetMPR | read-write | mandatory | For an MPR card, causes a selective reset of the MPR portion only. No management information is changed, however packets may be lost. |
| 1.3.6.1.4.1.74.2.14.2.6.1.5 | Columnrh1SelfTestExecuteCardSelfTest1 | read-write | mandatory | Causes the card to initiate the non-disruptive self-test function. The non-disruptive self-test has the following characteristics: - The test changes neither t… |
| 1.3.6.1.4.1.74.2.14.2.6.1.6 | Columnrh1SelfTestExecuteCardSelfTest2 | read-write | mandatory | Causes the card to initiate the disruptive self-test function. The disruptive self-test has the following characteristics: - The test resets the card without a… |
| 1.3.6.1.4.1.74.2.14.2.6.1.7 | Columnrh1SelfTestCardHealthState | read-only | mandatory | State of a card. |
| 1.3.6.1.4.1.74.2.14.2.6.1.8 | Columnrh1SelfTestCardHealthData | read-only | mandatory | This object gives data on the health of each 10BaseT card in the rack. The object is an octet string with a size of 3 octet, encoded as follows: Octet Definiti… |
| 1.3.6.1.4.1.74.2.14.3 | Noderh1PerfMonCapability | |||
| 1.3.6.1.4.1.74.2.14.3.1 | Tablerh1PerfMonSegmentTable | not-accessible | mandatory | A list of Performance Monitoring entries. Range from 1 to 3. Note, since these objects represent the sum of values from several cards in the rack, each time an… |
| 1.3.6.1.4.1.74.2.14.3.1.1 | Rowrh1PerfMonSegmentEntry | not-accessible | mandatory | Entry into the Performance Monitor Segment Table |
| 1.3.6.1.4.1.74.2.14.3.1.1.1 | Columnrh1PerfMonSegmentID | read-only | mandatory | Index by segment into the Performance Monitor table. This value available even if there are no cards on the segment. |
| 1.3.6.1.4.1.74.2.14.3.1.1.2 | Columnrh1PerfMonSegFrameSize1Bound | read-write | mandatory | The upper boundary for the first quantization band (the lower bound is 64 by definition). This boundary applies to both rh1PerfMonSegTotalBand1Frames and rh1Pe… |
| 1.3.6.1.4.1.74.2.14.3.1.1.3 | Columnrh1PerfMonSegFrameSize2Bound | read-write | mandatory | The upper boundary for the second quantization band. This boundary applies to both rh1PerfMonSegTotalBand2Frames and rh1PerfMonSegBand2Frames. The value may ra… |
| 1.3.6.1.4.1.74.2.14.3.1.1.4 | Columnrh1PerfMonSegFrameSize3Bound | read-write | mandatory | The upper boundary for the third quantization band. This boundary applies to both rh1PerfMonSegTotalBand3Frames and rh1PerfMonSegBand3Frames. The value may ran… |
| 1.3.6.1.4.1.74.2.14.3.1.1.5 | Columnrh1PerfMonSegFrameSize4Bound | read-write | mandatory | The upper boundary for the fourth quantization band (and the lower bound for the fifth quantization band). This boundary applies to both rh1PerfMonSegTotalBand… |
| 1.3.6.1.4.1.74.2.14.3.1.1.6 | Columnrh1PerfMonSegTotalFramesProcessedOk | read-only | mandatory | The number of valid frames processed through the segment. It does not include frames received with frame-too-long, FCS, length, or alignment errors, or frames … |
| 1.3.6.1.4.1.74.2.14.3.1.1.7 | Columnrh1PerfMonSegTotalOctetsProcessedOk | read-only | mandatory | The total number of octets processed through the segment. Octets counted are the number of data and padding octets in frames that are successfully received. Th… |
| 1.3.6.1.4.1.74.2.14.3.1.1.8 | Columnrh1PerfMonSegTotalCollisions | read-only | mandatory | The total number of times the transmit collision state is entered, no matter how many ports are involved. The counter is not incremented for receive collisions… |
| 1.3.6.1.4.1.74.2.14.3.1.1.9 | Columnrh1PerfMonSegTotalLateCollisions | read-only | mandatory | Counts the number of times that a collision has been detected on this port later than 512 bit times into the transmitted packet. A late collision is counted tw… |
| 1.3.6.1.4.1.74.2.14.3.1.1.10 | Columnrh1PerfMonSegTotalRunts | read-only | mandatory | Counts the number of collision fragments longer than 96 bits and shorter than a legal packet, detected on this segment. (Runts do not indicate a problem in the… |
| 1.3.6.1.4.1.74.2.14.3.1.1.11 | Columnrh1PerfMonSegTotalShortEvents | read-only | mandatory | Counts the number of fragments received on this segment. These fragments, less than 96-n bits long, indicate an external noise hit (a problem on the network). |
| 1.3.6.1.4.1.74.2.14.3.1.1.12 | Columnrh1PerfMonSegTotalFrameTooLongs | read-only | mandatory | Counts the number of frames received through this segment that are greater than 1518 bytes long. |
| 1.3.6.1.4.1.74.2.14.3.1.1.13 | Columnrh1PerfMonSegTotalAutoPartitions | read-only | mandatory | The total number of times ports on this segment (in this chassis) have been autopartitioned. |
| 1.3.6.1.4.1.74.2.14.3.1.1.14 | Columnrh1PerfMonSegTotalLongFragments | read-only | mandatory | The total number of fragments received by this segment. LongFragments are any frames greater or equal to 96 bits but less than 512 bits (which includes runt fr… |
| 1.3.6.1.4.1.74.2.14.3.1.1.15 | Columnrh1PerfMonSegTotalFifoErrors | read-only | mandatory | Counts the total number of times that a packet has been received by this segment with the transmission frequency (data rate) detectably out of spec. The exact … |
| 1.3.6.1.4.1.74.2.14.3.1.1.16 | Columnrh1PerfMonSegTotalErrorEnergy | read-only | mandatory | The total length in bytes of all error energy. Used to calculate network utilization. Errors included in this counter are: late collisions, long frames, long f… |
| 1.3.6.1.4.1.74.2.14.3.1.1.17 | Columnrh1PerfMonSegTotalNondataEnergy | read-only | mandatory | The total length in bytes of all non-data energy. Used to calculate network utilization. Non-data is defined as: collisions, runts, and short events. |
| 1.3.6.1.4.1.74.2.14.3.1.1.18 | Columnrh1PerfMonSegTotalManchesterViolations | read-only | mandatory | The number of manchester code violations. |
| 1.3.6.1.4.1.74.2.14.3.1.1.19 | Columnrh1PerfMonSegTotalBand1Frames | read-only | mandatory | The number of frames transmitted from this segment summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.1.1.20 | Columnrh1PerfMonSegTotalBand2Frames | read-only | mandatory | The number of frames transmitted from this segment summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.1.1.21 | Columnrh1PerfMonSegTotalBand3Frames | read-only | mandatory | The number of frames transmitted from this segment summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.1.1.22 | Columnrh1PerfMonSegTotalBand4Frames | read-only | mandatory | The number of frames transmitted from this segment summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.1.1.23 | Columnrh1PerfMonSegTotalBand5Frames | read-only | mandatory | The number of frames transmitted from this segment summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.1.1.24 | Columnrh1PerfMonSegCounts | read-only | mandatory | This object aggregates selected stats into one coded bit string. The definition of each position in the string is: Statistics counts for this segment. The octe… |
| 1.3.6.1.4.1.74.2.14.3.2 | Tablerh1PerfMonPortTable | not-accessible | mandatory | A list of Performance Monitor port entries. |
| 1.3.6.1.4.1.74.2.14.3.2.1 | Rowrh1PerfMonPortEntry | not-accessible | mandatory | Entry into the Performance Monitor Port table |
| 1.3.6.1.4.1.74.2.14.3.2.1.1 | Columnrh1PerfMonCardID | read-only | mandatory | An index into the performance monitoring port table. |
| 1.3.6.1.4.1.74.2.14.3.2.1.2 | Columnrh1PerfMonPortID | read-only | mandatory | An index into the performance monitoring port table. |
| 1.3.6.1.4.1.74.2.14.3.2.1.3 | Columnrh1PerfMonFramesReceivedOk | read-only | mandatory | A representation of the total frames of legal length that have not been corrupted in transmission. These frames can be encoded and decoded by commonly availabl… |
| 1.3.6.1.4.1.74.2.14.3.2.1.4 | Columnrh1PerfMonOctetsReceivedOk | read-only | mandatory | The number of octets received on this port. Octets counted are the number of data and padding octets in frames that are successfully received. The approximate … |
| 1.3.6.1.4.1.74.2.14.3.2.1.5 | Columnrh1PerfMonCollisions | read-only | mandatory | Counts the number of times that a collision has been detected on this port later than 512 bit times into the transmitted packet. A late collision is counted tw… |
| 1.3.6.1.4.1.74.2.14.3.2.1.6 | Columnrh1PerfMonLateCollisions | read-only | mandatory | Counts the number of times that a collision has been detected on this port later than 512 bit times into the transmitted packet. A late collision is counted tw… |
| 1.3.6.1.4.1.74.2.14.3.2.1.7 | Columnrh1PerfMonRunts | read-only | mandatory | Counts the number of collision fragments longer than a shortEvent and shorter than a legal packet, detected on this port. (Runts do not indicate a problem in t… |
| 1.3.6.1.4.1.74.2.14.3.2.1.8 | Columnrh1PerfMonShortEvents | read-only | mandatory | Counts the number of fragments received on this port. These fragments, less than 64 +/- 10 bits long, indicate an external noise hit (a problem on the network). |
| 1.3.6.1.4.1.74.2.14.3.2.1.9 | Columnrh1PerfMonFrameTooLongs | read-only | mandatory | Counts the number of frames received through this port that are greater than 1518 octets long. |
| 1.3.6.1.4.1.74.2.14.3.2.1.10 | Columnrh1PerfMonAutoPartitions | read-only | mandatory | Counts the number of times that the repeater has automatically partitioned this port. |
| 1.3.6.1.4.1.74.2.14.3.2.1.11 | Columnrh1PerfMonLongFragments | read-only | mandatory | The total number of fragments received by this segment. LongFragments are any frames greater or equal to 96 bits but less than 512 bits (which includes runt fr… |
| 1.3.6.1.4.1.74.2.14.3.2.1.12 | Columnrh1PerfMonFifoErrors | read-only | mandatory | Counts the number of times that a packet has been received by this port with the transmission frequency (data rate) detectably out of spec. The exact degree is… |
| 1.3.6.1.4.1.74.2.14.3.2.1.13 | Columnrh1PerfMonFramesTransmittedOk | read-only | mandatory | Transmitted frames are the number of valid 'authorized' frames transmitted out the port. Authorized frames are those for which: 1) port authorized type equals … |
| 1.3.6.1.4.1.74.2.14.3.2.1.14 | Columnrh1PerfMonOctetsTransmittedOk | read-only | mandatory | The number of octets transmitted from the hub on this port. Octets counted are the number of data and padding octets in frames that are successfully received (… |
| 1.3.6.1.4.1.74.2.14.3.2.1.15 | Columnrh1PerfMonErrorEnergy | read-only | mandatory | The total length in bytes of all error energy. Used to calculate network utilization. Errors included in this counter are: late collisions, long frames, long f… |
| 1.3.6.1.4.1.74.2.14.3.2.1.16 | Columnrh1PerfMonNondataEnergy | read-only | mandatory | The total length in bytes of all non-data energy. Used to calculate network utilization. Non-data is defined as: collisions, runts and short events. |
| 1.3.6.1.4.1.74.2.14.3.2.1.17 | Columnrh1PerfMonManchesterViolations | read-only | mandatory | The number of manchester code violations. |
| 1.3.6.1.4.1.74.2.14.3.2.1.18 | Columnrh1PerfMonBand1Frames | read-only | mandatory | The number of frames transmitted from this port (e.g., to a workstation) summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.2.1.19 | Columnrh1PerfMonBand2Frames | read-only | mandatory | The number of frames transmitted from this port (e.g., to a workstation) summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.2.1.20 | Columnrh1PerfMonBand3Frames | read-only | mandatory | The number of frames transmitted from this port (e.g., to a workstation) summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.2.1.21 | Columnrh1PerfMonBand4Frames | read-only | mandatory | The number of frames transmitted from this port (e.g., to a workstation) summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.2.1.22 | Columnrh1PerfMonBand5Frames | read-only | mandatory | The number of frames transmitted from this port (e.g., to a workstation) summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.2.1.23 | Columnrh1PerfMonPortCounts | read-only | mandatory | This object aggregates selected stats into one coded bit string. The definition of each position in the string is: Octet position Object 1-4 FramesReceivedOk 5… |
| 1.3.6.1.4.1.74.2.14.3.2.1.24 | Columnrh1PerfMonFrameSize1Bound | read-only | mandatory | A duplicate entry of rh1PerfMonSegFrameSizeXBound allow graphing of port stats with mimimum number of gets. |
| 1.3.6.1.4.1.74.2.14.3.2.1.25 | Columnrh1PerfMonFrameSize2Bound | read-only | mandatory | A duplicate entry of rh1PerfMonSegFrameSizeXBound allow graphing of port stats with mimimum number of gets. |
| 1.3.6.1.4.1.74.2.14.3.2.1.26 | Columnrh1PerfMonFrameSize3Bound | read-only | mandatory | A duplicate entry of rh1PerfMonSegFrameSizeXBound allow graphing of port stats with mimimum number of gets. |
| 1.3.6.1.4.1.74.2.14.3.2.1.27 | Columnrh1PerfMonFrameSize4Bound | read-only | mandatory | A duplicate entry of rh1PerfMonSegFrameSizeXBound allow graphing of port stats with mimimum number of gets. |
| 1.3.6.1.4.1.74.2.14.4 | Noderh1DownloadCapability | |||
| 1.3.6.1.4.1.74.2.14.4.1 | Scalarrh1DownloadImageFile | read-write | mandatory | The file that the Rack requests to be downloaded from the server. This object's value is the full or relative path of the file on the TFTP server containing th… |
| 1.3.6.1.4.1.74.2.14.4.2 | Scalarrh1DownloadIpAddr | read-write | mandatory | The IP address the Rack sends to request a download. A zero value indicates that it has not been set. This object is re-set after reboot. |
| 1.3.6.1.4.1.74.2.14.4.3 | Scalarrh1DownloadMacAddr | read-write | mandatory | The MAC address of a non-UDP/IP download server. If the either rh1EnhCtrlRackIpAddr or rh1DownloadIpAddr is not set (ie 0.0.0.0), then this address will be use… |
| 1.3.6.1.4.1.74.2.14.4.4 | Tablerh1DownloadCardTable | not-accessible | mandatory | A list of Download capability entries. |
| 1.3.6.1.4.1.74.2.14.4.4.1 | Rowrh1DownloadCardEntry | not-accessible | mandatory | Entry into the download capability card table. |
| 1.3.6.1.4.1.74.2.14.4.4.1.1 | Columnrh1DownloadCardID | read-only | mandatory | Index into the download execution table. |
| 1.3.6.1.4.1.74.2.14.4.4.1.2 | Columnrh1DownloadExecute | read-write | mandatory | Setting the value to 2 causes the rack to initiate a download request to the Download Server for the selected card. After a download, the card is reset. |
| 1.3.6.1.4.1.74.2.14.5 | Noderh1AddrTrackCapability | |||
| 1.3.6.1.4.1.74.2.14.5.1 | Tablerh1AddrTrackSegmentTable | not-accessible | mandatory | A list of Address tracking entries. |
| 1.3.6.1.4.1.74.2.14.5.1.1 | Rowrh1AddrTrackEntry | not-accessible | mandatory | Entry into the address tracking segment table. |
| 1.3.6.1.4.1.74.2.14.5.1.1.1 | Columnrh1AddrTrackSegmentID | read-only | mandatory | Index into the address tracking segement table |
| 1.3.6.1.4.1.74.2.14.5.1.1.2 | Columnrh1AddrTrackSendHubLearn | read-write | mandatory | Writing (2) is used to cause the special map learn frame to be sent. |
| 1.3.6.1.4.1.74.2.14.5.1.1.3 | Columnrh1AddrTrackSendHubLearnCtrl | read-write | mandatory | Used enable/inhibit the use of the special map learn frames. |
| 1.3.6.1.4.1.74.2.14.5.2 | Tablerh1AddrTrackPortTable | not-accessible | mandatory | A list of address tracking entries. |
| 1.3.6.1.4.1.74.2.14.5.2.1 | Rowrh1AddrTrackPortEntry | not-accessible | mandatory | Entry into the address tracking port table |
| 1.3.6.1.4.1.74.2.14.5.2.1.1 | Columnrh1AddrTrackCardID | read-only | mandatory | An index into the address tracking port table. |
| 1.3.6.1.4.1.74.2.14.5.2.1.2 | Columnrh1AddrTrackPortID | read-only | mandatory | An index into the address tracking port table. |
| 1.3.6.1.4.1.74.2.14.5.2.1.3 | Columnrh1AddrTrackDetectedMacAddr | read-only | mandatory | This is the MAC address that the Rack has detected on this port. The address isn't recorded if there is a CRC error; but is recorded if the length field is inc… |
| 1.3.6.1.4.1.74.2.14.5.2.1.4 | Columnrh1AddrTrackDetectedAddrType | read-only | mandatory | The detected type of connectivity associated with this port. |
| 1.3.6.1.4.1.74.2.14.5.2.1.5 | Columnrh1AddrTrackAuthMacAddr | read-write | mandatory | This is the authorized MAC address the hub was configured with for this port. The value is settable to allow the administration station to establish a source a… |
| 1.3.6.1.4.1.74.2.14.5.2.1.6 | Columnrh1AddrTrackAuthAddrType | read-write | mandatory | The authorized connectivity associated with this port. |
| 1.3.6.1.4.1.74.2.14.5.2.1.7 | Columnrh1AddrTrackNewHubAddr | not-accessible | mandatory | Indicates that a new, adjacent hub has been detected. The MAC address of that hub is included. This object included in traps only. |
| 1.3.6.1.4.1.74.2.14.6 | Noderh1EnhCtrlCapability | |||
| 1.3.6.1.4.1.74.2.14.6.1 | Scalarrh1EnhCtrlResetRackConfig | read-write | mandatory | This action resets all configuration data to be equal to the factory default values stored in firmware. This action also causes a reset. Note, that when new ca… |
| 1.3.6.1.4.1.74.2.14.6.2 | Scalarrh1EnhCtrlRackVersion | read-only | mandatory | The hardware release number for the rack which is made up of slot 0, and the backplane. The numbers are in the format x backplane y.m slot zero This numbers x … |
| 1.3.6.1.4.1.74.2.14.6.3 | Tablerh1EnhCtrlPowerTable | not-accessible | mandatory | Information about the two power supply 'slots' |
| 1.3.6.1.4.1.74.2.14.6.3.1 | Rowrh1EnhCtrlPowerEntry | not-accessible | mandatory | Entry into the Enhanced Control Power supply table |
| 1.3.6.1.4.1.74.2.14.6.3.1.1 | Columnrh1EnhCtrlPowerID | read-only | mandatory | Index into the power supply table. |
| 1.3.6.1.4.1.74.2.14.6.3.1.2 | Columnrh1EnhCtrlPowerType | read-only | mandatory | For each of the two 'slots' for a power supply, this object defines what type of power supply is installed. Type none means no supply is present. Type alternat… |
| 1.3.6.1.4.1.74.2.14.6.4 | Scalarrh1EnhCtrlCardMap | read-only | mandatory | A string of bits which reflects the current configuration of units which are viewed by group managed objects. In each bit position, a 1 is present, and a 0 is … |
| 1.3.6.1.4.1.74.2.14.6.5 | Scalarrh1EnhCtrlRackMap | read-only | mandatory | The card type for each card in the rack, contained in one string. For each card (not including slot 0), there are 5 octets which define manufacturer, board typ… |
| 1.3.6.1.4.1.74.2.14.6.6 | Scalarrh1EnhCtrlRackmaster | read-only | mandatory | An index (rh1EnhCrlCardID) to the current rack master. |
| 1.3.6.1.4.1.74.2.14.6.7 | Scalarrh1EnhCtrlLastRackmaster | read-only | mandatory | An index (rh1EnhCrlCardID) to the last rack master. A non zero value here means that since the last reset, a card successfully became rack master, then relinqu… |
| 1.3.6.1.4.1.74.2.14.6.8 | Scalarrh1EnhCtrlGatewayIpAddr | read-write | mandatory | The IP address of a gateway server to which all IP packets will be sent whose destination network is not the local network. |
| 1.3.6.1.4.1.74.2.14.6.9 | Scalarrh1EnhCtrlNetworkMask | read-write | mandatory | The subnet mask that is used in the comparison of the hub IP address to the destination IP address to determine whether or not the destination IP address is on… |
| 1.3.6.1.4.1.74.2.14.6.10 | Scalarrh1EnhCtrlRackIpAddr | read-write | mandatory | The rackmaster's IP address. This object's value is the IP address in dot notation. |
| 1.3.6.1.4.1.74.2.14.6.11 | Scalarrh1EnhCtrlRs232State | read-only | mandatory | Indicates whether the RS-232 port is active (i.e., something connected) and if active, whether the user is currently logged in. |
| 1.3.6.1.4.1.74.2.14.6.12 | Scalarrh1EnhCtrlRs232DataRate | read-write | mandatory | Indicates the data rate the RS-232 port is set at. |
| 1.3.6.1.4.1.74.2.14.6.13 | Scalarrh1EnhCtrlTrapCountPeriodCtrl | read-write | mandatory | The transmission period (seconds) of the Trap(count) packet. The valid range of timer values is 1 through 3,600 (1 hour). A value of all 0's causes the packet … |
| 1.3.6.1.4.1.74.2.14.6.14 | Scalarrh1EnhCtrlFlashRackStatusLED | read-write | mandatory | When set to FLASH, the main functional status indicator, an LED labelled Rack Status will flash at a slow rate (about 30 times per minute). This object allows … |
| 1.3.6.1.4.1.74.2.14.6.15 | Scalarrh1EnhCtrlSendTrapConfig | read-write | mandatory | Writing (2) causes the trap(config) packet to be sent. |
| 1.3.6.1.4.1.74.2.14.6.16 | Tablerh1EnhCtrlMngrTable | not-accessible | mandatory | A list of addresses for multiple management station which get traps. |
| 1.3.6.1.4.1.74.2.14.6.16.1 | Rowrh1EnhCtrlMngrEntry | not-accessible | mandatory | Entry into the Enhanced Control Manager table |
| 1.3.6.1.4.1.74.2.14.6.16.1.1 | Columnrh1EnhCtrlMngrID | read-only | mandatory | Index into the manager table. |
| 1.3.6.1.4.1.74.2.14.6.16.1.2 | Columnrh1EnhCtrlTrapMacAddr | read-write | mandatory | The MAC address(es) to which hubs send Trap packets if the IP address is not set. The single default is a multicast address. That address might be changed from… |
| 1.3.6.1.4.1.74.2.14.6.16.1.3 | Columnrh1EnhCtrlTrapIpAddr | read-write | mandatory | The IP address(es) to which hubs send Trap packets. 0.0.0.0 defines not set. Up to four values are supported. |
| 1.3.6.1.4.1.74.2.14.6.17 | Tablerh1EnhCtrlCardTable | not-accessible | mandatory | A list of enhanced control entries. |
| 1.3.6.1.4.1.74.2.14.6.17.1 | Rowrh1EnhCtrlCardEntry | not-accessible | mandatory | Entry into the Enhanced Control Card table |
| 1.3.6.1.4.1.74.2.14.6.17.1.1 | Columnrh1EnhCtrlCardID | read-only | mandatory | Index into the Enhanced control card table. |
| 1.3.6.1.4.1.74.2.14.6.17.1.2 | Columnrh1EnhCtrlSegment | read-write | mandatory | The backplane segment which the card is attached to. This information is coded into the first three bits (0-2) of the octet. Set (1) means there is a connectio… |
| 1.3.6.1.4.1.74.2.14.6.17.1.3 | Columnrh1EnhCtrlCardVersion | read-only | mandatory | The CPU and MPR hardware, ROM, and software (flash) version of the card. For non MPRs, the ROM and software versions are 0.0 octet 1-2 H/W version (backplane r… |
| 1.3.6.1.4.1.74.2.14.6.17.1.4 | Columnrh1EnhCtrlCardType | read-only | mandatory | The same 5 bytes defined in rh1EnhCtrlRackMap for this card. Duplicated here to simplify management station screen development, MIB browsing, and traps. |
| 1.3.6.1.4.1.74.2.14.6.17.1.5 | Columnrh1EnhCtrlCardIpAddr | read-write | mandatory | The IP Address associated with the primary agent for the card. Depending on the card chosen, a set may change the address used, or may only change the stored a… |
| 1.3.6.1.4.1.74.2.14.6.17.1.6 | Columnrh1EnhCtrlResetCardConfig | read-write | mandatory | This action resets the card configuration data to be equal to the factory default values stored the firmware. These values are Port state, Authorized addresses… |
| 1.3.6.1.4.1.74.2.14.6.17.1.7 | Columnrh1EnhCtrlFlashCardStatusLED | read-write | mandatory | When set to FLASH, the main functional status indicator, an LED labelled Status will flash at a slow rate (about 30 times per minute). This object allows a man… |
| 1.3.6.1.4.1.74.2.14.6.18 | Tablerh1EnhCtrlPortTable | not-accessible | mandatory | A list of Enhanced control entries. |
| 1.3.6.1.4.1.74.2.14.6.18.1 | Rowrh1EnhCtrlPortEntry | not-accessible | mandatory | Entry into the enhanced control port table |
| 1.3.6.1.4.1.74.2.14.6.18.1.1 | Columnrh1EnhPortCtrlCardID | read-only | mandatory | An index into the enhanced control port table. |
| 1.3.6.1.4.1.74.2.14.6.18.1.2 | Columnrh1EnhCtrlPortID | read-only | mandatory | An index into the enhanced control port table. |
| 1.3.6.1.4.1.74.2.14.6.18.1.3 | Columnrh1EnhCtrlLinkIntegrityCtrl | read-write | mandatory | Link integrity checking is enabled/disabled on a per port basis. |
| 1.3.6.1.4.1.74.2.14.6.18.1.4 | Columnrh1EnhCtrlLinkIntegrityAlarmingCtrl | read-write | mandatory | Enables/disables alarming (i.e., trap(alarm)) on a port basis for the link integrity alarming feature. The reason to add control at the hub for suppressing thi… |
| 1.3.6.1.4.1.74.2.14.6.18.1.5 | Columnrh1EnhCtrlLinkIntegrityState | read-only | mandatory | |
| 1.3.6.1.4.1.74.2.14.6.18.1.6 | Columnrh1EnhCtrlExtendedDistanceCtrl | read-write | mandatory | Enables/disables the extended distance option. |
| 1.3.6.1.4.1.74.2.14.6.18.1.7 | Columnrh1EnhCtrlPortConfig | read-only | mandatory | A collection of configuration information for a specific port. The data value of this object contains the data values associated with the following objects. Si… |
| 1.3.6.1.4.1.74.2.14.6.19 | Scalarrh1EnhCtrlPAPortCtrl | read-write | mandatory | The administrator settable state of the Private Administration port. Indicates whether the port has been administratively disabled or whether it is in the norm… |
| 1.3.6.1.4.1.74.2.14.6.20 | Scalarrh1EnhCtrlPALinkIntegrityState | read-only | mandatory | Indicates whether the link is good or not. This value is valid even if the port is disabled. |
| 1.3.6.1.4.1.74.2.14.6.21 | Tablerh1EnhCtrlSegmentTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.74.2.14.6.21.1 | Rowrh1EnhCtrlSegmentEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.74.2.14.6.21.1.1 | Columnrh1EnhCtrlSegmentID | read-only | mandatory | |
| 1.3.6.1.4.1.74.2.14.6.21.1.2 | Columnrh1EnhCtrlSegConfigReset | read-write | mandatory | This action resets the segment configuration data (for Segmentation, FrameSizeBounds, and Security) to be equal to the factory default values stored the firmwa… |
| 1.3.6.1.4.1.74.2.14.6.22 | Scalarrh1EnhCtrlConfigResetHub | read-write | mandatory | This action resets the Hub level configuration data to be equal to the factory default values stored in the firmware. These values are: Hub IP address, Trap IP… |
| 1.3.6.1.4.1.74.2.14.6.23 | Scalarrh1EnhCtrlSegmentMap | read-only | mandatory | This bit string indicates which segments have MPR card present. Only segments with MPR cards attached have valid statistics available. If a bit is set, the seg… |
| 1.3.6.1.4.1.74.2.14.7 | Noderh1SecurityCapability | |||
| 1.3.6.1.4.1.74.2.14.7.1 | Scalarrh1SecPassword | write-only | mandatory | The community string (password) for which the Rack will allow SETs. This object is defined for setting/changing the password. The password sent in SET packets … |
| 1.3.6.1.4.1.74.2.14.7.2 | Scalarrh1SecBadComPasswords | read-only | mandatory | Indicates a login attempt on the serial port was attempted with the wrong password. Although this is an important alarm, no acknowledgement strategy is propose… |
| 1.3.6.1.4.1.74.2.14.7.3 | Scalarrh1SecSettingAdminMacAddr | read-only | mandatory | The source MAC address of the last SNMP Set packet processed by the hub. Also, if the state of the hub is changed via the RS-232 interface, this object is sent… |
| 1.3.6.1.4.1.74.2.14.7.4 | Scalarrh1SecSettingAdminIpAddr | read-only | mandatory | The source IP address of the last SNMP Set packet processed by the hub. |
| 1.3.6.1.4.1.74.2.14.7.5 | Scalarrh1SecInbandSetsState | read-only | mandatory | Indicates whether the hub will permit SNMP SETs received on the network. SETs can only be disabled or enabled via the RS-232 port. |
| 1.3.6.1.4.1.74.2.14.7.6 | Tablerh1SecSegmentTable | not-accessible | mandatory | A list of Security capability entries. |
| 1.3.6.1.4.1.74.2.14.7.6.1 | Rowrh1SecSegmentEntry | not-accessible | mandatory | Entry into the Security segment table |
| 1.3.6.1.4.1.74.2.14.7.6.1.1 | Columnrh1SecSegmentID | read-only | mandatory | Index into the table. |
| 1.3.6.1.4.1.74.2.14.7.6.1.2 | Columnrh1SecEavesdroppingCtrl | read-write | mandatory | Enables/disables jamming of frames to non-destination ports. This is enabled/disabled on a segment basis. |
| 1.3.6.1.4.1.74.2.14.7.6.1.3 | Columnrh1SecIntrusionCtrl | read-write | mandatory | Enables/disables filtering on a segment basis. |
| 1.3.6.1.4.1.74.2.14.7.6.1.4 | Columnrh1SecIntrusionAlarmCtrl | read-write | mandatory | Enables/disables alarming (i.e., trap(intrusion)) on a segment basis for the intrusion protection security feature. |
| 1.3.6.1.4.1.74.2.14.7.7 | Tablerh1SecPortTable | not-accessible | mandatory | A list of Security capability entries. |
| 1.3.6.1.4.1.74.2.14.7.7.1 | Rowrh1SecPortEntry | not-accessible | mandatory | Entry into the Security port table |
| 1.3.6.1.4.1.74.2.14.7.7.1.1 | Columnrh1SecCardID | read-only | mandatory | An index into the security port table. |
| 1.3.6.1.4.1.74.2.14.7.7.1.2 | Columnrh1SecPortID | read-only | mandatory | An index into the security port table. |
| 1.3.6.1.4.1.74.2.14.7.7.1.3 | Columnrh1SecIntrusionAddr | read-only | mandatory | If an intruder has been detected on this port, the value of this object is the source address of the intruder. If the value is all 0's, no intrusion is detecte… |
| 1.3.6.1.4.1.74.2.14.7.7.1.4 | Columnrh1SecIntrusionTimeStamp | read-only | mandatory | The timestamp of the last intrusion. It is a snapshot of sysUpTime. |
| 1.3.6.1.4.1.74.2.14.7.7.1.5 | Columnrh1SecIntrusions | read-only | mandatory | Indicates the number of times intrusion has been detected on this port. If the value is all 0's, no intrusion is detected. |