RIVERSTONE-CMTS-MIB
49 objects
This mib module defines the Riverstone Networks enterpise MIB for CMTS modules. http://www.riverstonenet.com/products. Copyright (C) Riverstone Networks, Inc 2000
Imported Objects
| DOCS-IF-MIB | docsIfCmtsModIndex docsIfCmtsModIntervalUsageCode |
| IF-MIB | ifIndex |
| RSTONE-SMI-MIB | riverstoneMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5567.2.11 | IdentityrsCmtsMib | This mib module defines the Riverstone Networks enterpise MIB for CMTS modules. http://www.riverstonenet.com/products. Copyright (C) Riverstone Networks, Inc 2… | ||
| 1.3.6.1.4.1.5567.2.11.1 | TablersCmtsBaseTable | not-accessible | current | CMTS Base table settable parameters. |
| 1.3.6.1.4.1.5567.2.11.1.1 | RowrsCmtsBaseEntry | not-accessible | current | An entry containing objects describing attributes of each MAC entry, extending the information in ifEntry. An entry in this table exists for each ifEntry with … |
| 1.3.6.1.4.1.5567.2.11.1.1.2 | ColumnrsCmtsBaseBpduFilter | read-write | current | Indicates whether we do BPDU filtering on the headend. |
| 1.3.6.1.4.1.5567.2.11.1.1.3 | ColumnrsCmtsBaseBpduFilterHits | read-only | current | Counts number of BPDU filter hits on the headend. |
| 1.3.6.1.4.1.5567.2.11.1.1.4 | ColumnrsCmtsBaseNonIPFilter | read-write | current | Indicates whether we do non-IP filtering on the headend. |
| 1.3.6.1.4.1.5567.2.11.1.1.5 | ColumnrsCmtsBaseNonIPFilterHits | read-only | current | Counts number of non-IP filter hits on the headend. |
| 1.3.6.1.4.1.5567.2.11.1.1.6 | ColumnrsCmtsBaseMapLength | read-write | current | Length of the generated maps in microseconds. |
| 1.3.6.1.4.1.5567.2.11.1.1.7 | ColumnrsCmtsBaseMapLeadTime | read-write | current | The amount of time between when we send a map and its effective start time in microseconds. |
| 1.3.6.1.4.1.5567.2.11.1.1.8 | ColumnrsCmtsBaseInitMaintLength | read-write | current | The length of the initial maintenance interval in microseconds. |
| 1.3.6.1.4.1.5567.2.11.1.1.9 | ColumnrsCmtsBase3137Config1 | read-write | current | 3137 configuration register 1. |
| 1.3.6.1.4.1.5567.2.11.1.1.10 | ColumnrsCmtsBase3137Config2 | read-write | current | 3137 configuration register 2. |
| 1.3.6.1.4.1.5567.2.11.1.1.11 | ColumnrsCmtsBaseConcatenation | read-write | current | Indicates whether we do Concatenation on the headend. |
| 1.3.6.1.4.1.5567.2.11.1.1.12 | ColumnrsCmtsBaseBpiHwAssist | read-write | current | Indicates whether we do key generation in hardware. |
| 1.3.6.1.4.1.5567.2.11.1.1.13 | ColumnrsCmtsBaseGenericCmd | read-write | current | A generic command to be applied to the active or startup configuration. The string is not to exceed 255 alpha-numeric characters. To write or check the status … |
| 1.3.6.1.4.1.5567.2.11.1.1.14 | ColumnrsCmtsBaseGenericCmdStatus | read-write | current | |
| 1.3.6.1.4.1.5567.2.11.1.1.15 | ColumnrsCmtsBaseUccRetryInterval | read-write | current | Interval in milliseconds between successive UCC requests. |
| 1.3.6.1.4.1.5567.2.11.1.1.16 | ColumnrsCmtsBaseUccRetries | read-only | current | Number of UCC request retries before timing out. |
| 1.3.6.1.4.1.5567.2.11.2 | TablersCmtsUpstreamTable | not-accessible | current | CMTS Upstream table configurable parameters. |
| 1.3.6.1.4.1.5567.2.11.2.1 | RowrsCmtsUpstreamEntry | not-accessible | current | An entry containing objects describing attributes of each Upstream entry, extending the information in ifEntry. |
| 1.3.6.1.4.1.5567.2.11.2.1.1 | ColumnrsCmtsUpstreamNominalRxPower | read-write | current | The value indicates the nominal, receive power (indBmV) of each upstream RF port. |
| 1.3.6.1.4.1.5567.2.11.2.1.2 | ColumnrsCmtsUpstreamState | read-write | current | Indicates that the given upstream port is operational. |
| 1.3.6.1.4.1.5567.2.11.2.1.3 | ColumnrsCmtsUpstreamPolicing | read-write | current | Indicates if we are doing upstream traffic policing. |
| 1.3.6.1.4.1.5567.2.11.2.1.4 | ColumnrsCmtsUpstreamRangeInterval | read-write | current | Indicates the Invited (Periodic) Ranging Intervals as input to the Bandwidth Allocator algorithm. |
| 1.3.6.1.4.1.5567.2.11.2.1.5 | ColumnrsCmtsUpstreamRangeRetryInterval | read-write | current | Indicates the Invited (Periodic) Ranging Retry Intervals as input to the Bandwidth Allocator algorithm. |
| 1.3.6.1.4.1.5567.2.11.2.1.6 | ColumnrsCmtsUpstreamPowerThreshold | read-write | current | Indicates the Power Threshold for the upstream port. |
| 1.3.6.1.4.1.5567.2.11.2.1.7 | ColumnrsCmtsUpstreamPowerAdjust | read-write | current | Indicates whether we override upstream power adjustments performed by the CMTS to the CMs. If set the 'true', all RNG-Resp messages will be transmitted with ZE… |
| 1.3.6.1.4.1.5567.2.11.2.1.8 | ColumnrsCmtsUpstreamTimingAdjust | read-write | current | Indicates whether we override upstream timing adjustments performed by the CMTS to the CMs. If set the 'true', all RNG-Resp messages will be transmitted with Z… |
| 1.3.6.1.4.1.5567.2.11.2.1.9 | ColumnrsCmtsUpstreamFreqencyAdjust | read-write | current | Indicates whether we override upstream frequency adjustments performed by the CMTS to the CMs. If set the 'true', all RNG-Resp messages will be transmitted wit… |
| 1.3.6.1.4.1.5567.2.11.2.1.10 | ColumnrsCmtsUpstreamTXCoefficients | read-write | current | Indicates whether we omit the equalization coefficients for this upstream channel. |
| 1.3.6.1.4.1.5567.2.11.2.1.11 | ColumnrsCmtsUpstreamForceContinue | read-write | current | Indicates whether we force all RNG-Resp messages to issue a 'Continue' Ranging Status indefinitely. |
| 1.3.6.1.4.1.5567.2.11.2.1.12 | ColumnrsCmtsUpstreamQosConfirm | read-write | current | Indicates whether we would like to confirm the requested QoS parameters for this upstream during registration. |
| 1.3.6.1.4.1.5567.2.11.2.1.13 | ColumnrsCmtsUpstreamQosMaxBps | read-write | current | The maximum number of bits per second of upstream bandwidth that we will allot to modems which request a minimum upstream rate. We use this to control the amou… |
| 1.3.6.1.4.1.5567.2.11.3 | TablersCmtsModulationTable | not-accessible | current | Describes a modulation profile associated with one or more upstream channels. |
| 1.3.6.1.4.1.5567.2.11.3.1 | RowrsCmtsModulationEntry | not-accessible | current | Describes a modulation profile for an Interval Usage Code for one or more upstream channels. |
| 1.3.6.1.4.1.5567.2.11.3.1.1 | ColumnrsCmtsModulationUWLength | read-only | current | Length of unique word pattern, in bytes. |
| 1.3.6.1.4.1.5567.2.11.3.1.2 | ColumnrsCmtsModulationDetectWindow | read-write | current | Time window around a nominal detection time in which the unique window detector is enabled. |
| 1.3.6.1.4.1.5567.2.11.3.1.3 | ColumnrsCmtsModulationUWMismatch | read-write | current | Specifies precision of match between unique word pattern and incoming burst by specifying the number of bits which are allowed to NOT match. |
| 1.3.6.1.4.1.5567.2.11.3.1.4 | ColumnrsCmtsModulationEQSymbols | read-write | current | Equalizer training sequence length, in symbols. |
| 1.3.6.1.4.1.5567.2.11.4 | TablersCmtsDownstreamTable | not-accessible | current | CMTS Downstream table settable parameters. |
| 1.3.6.1.4.1.5567.2.11.4.1 | RowrsCmtsDownstreamEntry | not-accessible | current | An entry containing objects describing attributes of each Downstream entry, extending the information in ifEntry. |
| 1.3.6.1.4.1.5567.2.11.4.1.1 | ColumnrsCmtsDownstreamState | read-write | current | Indicates whether the downstream port is enabled. |
| 1.3.6.1.4.1.5567.2.11.4.1.2 | ColumnrsCmtsDownstreamModulation | read-write | current | Indicates whether downstream modulation is turned on. When disabled, the downstream transmitter will output a CW, or tonal signal, at the tuned RF frequency. |
| 1.3.6.1.4.1.5567.2.11.6 | NodersCmtsConformance | |||
| 1.3.6.1.4.1.5567.2.11.6.1 | NodersCmtsGroups | |||
| 1.3.6.1.4.1.5567.2.11.6.1.1 | GrouprsCmtsBaseGroup | current | A collection of objects providing additional configuration and monitoring capabilites of Cable Modem Line Card parameters. | |
| 1.3.6.1.4.1.5567.2.11.6.2 | NodersCmtsCompliances | |||
| 1.3.6.1.4.1.5567.2.11.6.2.1 | CompliancersCmtsMibCompliance | current | The compliance statement for devices implementing Riverstone extended Cable Modem MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RsCmtsCmdStatus | INTEGER { undefined(0), active(1), startup(2), process(3), success(4), failed(5) } | current | A unique value for each status code of the generic cmts command variable. |