RIVERSTONE-IMAGE-MIB
34 objects
This mib module defines the objects to be used by SNMP to access the 'system image' commands on the Riverstone router, i.e., to add, list, choose and delete system images from PCMCIA flashcards.
Imported Objects
| RIVERSTONE-SMI-MIB | riverstoneMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5567.2.13 | IdentityrsImageMib | This mib module defines the objects to be used by SNMP to access the 'system image' commands on the Riverstone router, i.e., to add, list, choose and delete sy… | ||
| 1.3.6.1.4.1.5567.2.13.1 | ScalarrsImageMibAction | read-write | current | The action to be performed. For example, addImageToAgent uses tftp to transfer the image from a tftp server to the agent. Default value is no operation, called… |
| 1.3.6.1.4.1.5567.2.13.2 | ScalarrsImageMibTftpServerAddress | read-write | current | The IPv4 address of the tftp server to be used by the agent when adding an image. Default value is 0.0.0.0. Address must be a unicast address that is reachable… |
| 1.3.6.1.4.1.5567.2.13.3 | ScalarrsImageMibHostName | read-write | current | The name of the host running the tftp server used to add an image to the agent. Default value is a blank string. Length of image name must not exceed 255 alpha… |
| 1.3.6.1.4.1.5567.2.13.4 | ScalarrsImageMibTftpUrl | read-write | current | The URL which gives the tftp server ip address and image name to be added to the agent. Default value is blank. e.g. tftp://10.50.6.4/qa/ssr3000 |
| 1.3.6.1.4.1.5567.2.13.5 | ScalarrsImageMibImageName | read-write | current | The image name that the action task is to involve. For example, for adding an image to the agent, rsImageMibImageName is the image to be added from the tftp se… |
| 1.3.6.1.4.1.5567.2.13.6 | ScalarrsImageMibDestination | read-write | current | Which flashcard(s) to perform the add, choose or delete operation on. The choices are: 1. first available flashcard in slot0 or slot1 of both the Primary and B… |
| 1.3.6.1.4.1.5567.2.13.7 | ScalarrsImageMibActivateTransfer | read-write | current | Activate the transfer operation (add, choose or delete) with a value of True(1) or stop it with False(2). Default value is False(2). Poll rsImageMibPrimaryCMOp… |
| 1.3.6.1.4.1.5567.2.13.8 | ScalarrsImageMibPrimaryCMOperationStatus | read-only | current | The current status of the action task on the Primary Control Module. Default is idle. Adding means an image is being added to a flashcard of the Primary CM. Ch… |
| 1.3.6.1.4.1.5567.2.13.9 | ScalarrsImageMibBackupCMOperationStatus | read-only | current | The current status of the action task on the Backup Control Module. Default is idle. Adding means an image is being added to a flashcard of the Backup CM. Choo… |
| 1.3.6.1.4.1.5567.2.13.10 | ScalarrsImageMibPrimaryCMLastError | read-only | current | A numeric code for the reason why the last action failed on the Primary CM. Default value is noInfo. |
| 1.3.6.1.4.1.5567.2.13.11 | ScalarrsImageMibBackupCMLastError | read-only | current | A numeric code for the reason why the last action failed on the Backup CM. Default value is noInfo. |
| 1.3.6.1.4.1.5567.2.13.12 | ScalarrsImageMibPrimaryCMLastErrorString | read-only | current | A string description of rsImageMibPrimaryCMLastError. Default value is blank. |
| 1.3.6.1.4.1.5567.2.13.13 | ScalarrsImageMibBackupCMLastErrorString | read-only | current | A string description of rsImageMibBackupCMLastError. Default value is blank. |
| 1.3.6.1.4.1.5567.2.13.14 | TablersImageMibListTable | not-accessible | current | Listing images is performed by snmp get and snmp getNext. This table describes the images listed on the Primary and/or Backup PCMCIA flashcards. Information fo… |
| 1.3.6.1.4.1.5567.2.13.14.1 | RowrsImageMibListEntry | not-accessible | current | Each table entry contains certain information about a specific image that is present on a flashcard. |
| 1.3.6.1.4.1.5567.2.13.14.1.1 | ColumnrsImageMibControlModuleIndex | not-accessible | current | A value which together with rsImageMibSlotIndex and rsImageMibImageIndex forms an index which identifies an entry in the table. On the device managed, there ar… |
| 1.3.6.1.4.1.5567.2.13.14.1.2 | ColumnrsImageMibSlotIndex | not-accessible | current | A value which together with rsImageMibControlModuleIndex and rsImageMibImageIndex forms an index which identifies an entry in the table. On the device managed,… |
| 1.3.6.1.4.1.5567.2.13.14.1.3 | ColumnrsImageMibImageIndex | not-accessible | current | A value which together with rsImageMibControlModuleIndex and rsImageMibSlotIndex forms an index which identifies an entry in the table. On the device managed, … |
| 1.3.6.1.4.1.5567.2.13.14.1.4 | ColumnrsImageMibListImageName | read-only | current | The name of the image on the flashcard. Length of image name must not exceed 255 alpha-numeric characters, no spaces in imagename. |
| 1.3.6.1.4.1.5567.2.13.14.1.5 | ColumnrsImageMibVersion | read-only | current | The version of the firmware image. |
| 1.3.6.1.4.1.5567.2.13.14.1.6 | ColumnrsImageMibChosen | read-only | current | A unique value, greater than zero, specifying whether the firmware image is the chosen image or not. That is, is the image the chosen image for the next reboot? |
| 1.3.6.1.4.1.5567.2.13.15 | NodersImageMibConformance | |||
| 1.3.6.1.4.1.5567.2.13.15.1 | NodersImageMibGroups | |||
| 1.3.6.1.4.1.5567.2.13.15.1.1 | GrouprsImageMibAddDeleteChooseGroup | current | The objects for adding, deleting, and choosing firmware images on the Primary and/or Backup Control Module flashcards. Table columnar objects which are table i… | |
| 1.3.6.1.4.1.5567.2.13.15.1.2 | GrouprsImageMibListGroup | current | The objects for listing firmware images on the Primary and/or Backup Control Module flashcards. | |
| 1.3.6.1.4.1.5567.2.13.15.1.3 | GrouprsImageMibStatusAndErrorGroup | current | The objects for monitoring errors.. | |
| 1.3.6.1.4.1.5567.2.13.15.2 | NodersImageMibCompliance | |||
| 1.3.6.1.4.1.5567.2.13.15.2.1 | CompliancersImageMibBasicComplianceV1 | current | The basic implementation requirements for version 1.0 of the RIVERSTONE-IMAGE-MIB. That is, the objects in these groups must be implemented for V1 of this Mib. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RsImageMibChosen | INTEGER { noInfo(1), chosen(2), notChosen(3) } | current | A unique value, greater than zero, specifying whether the firmware image is the chosen image or not. Default value is noInfo(1). |
| RsImageMibControlModuleIndex | INTEGER { primaryCM(1), backupCM(2) } | current | The table in this MIB is indexed by 'rsImageMibControlModuleIndex', 'rsImageMibSlotIndex' and 'rsImageMibImageIndex'- not by 'ifIndex'. Why is there a separate index? Traditionally, ifIndex values are chosen by agents, … |
| RsImageMibErrorCode | INTEGER { noInfo(1), successfullyCompleted(2), timeout(3), networkError(4), noSpace(5), invalidImage(6) , commandCompleted(7), internalError(8), tftpServerError(9) } | current | A unique value, greater than zero defining the operation completion status. |
| RsImageMibImageIndex | INTEGER { firstImage(1), secondImage(2), thirdImage(3) } | current | The table in this MIB is indexed by 'rsImageMibControlModuleIndex', 'rsImageMibSlotIndex' and 'rsImageMibImageIndex'- not by 'ifIndex'. |
| RsImageMibSlotIndex | INTEGER { slot0(1), slot1(2) } | current | The table in this MIB is indexed by 'rsImageMibControlModuleIndex', 'rsImageMibSlotIndex' and 'rsImageMibImageIndex'- not by 'ifIndex'. |