RIVERSTONE-PING-EXTENSIONS-MIB
47 objects
This module extends the pingMIB defined in RFC2925.
Imported Objects
| ATM-TC-MIB | AtmVcIdentifier AtmVpIdentifier |
| DISMAN-PING-MIB | pingCtlOwnerIndex pingCtlTestName |
| MPLS-TE-MIB | MplsTunnelIndex |
| Q-BRIDGE-MIB | VlanIndex |
| RIVERSTONE-SMI-MIB | riverstoneMibs |
| RIVERSTONE-TC-MIB | RsContextId RsDirection RsDomainList |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5567.2.55 | IdentityrsPingExtensionsMIB | This module extends the pingMIB defined in RFC2925. | ||
| 1.3.6.1.4.1.5567.2.55.1 | NodersPingObjects | |||
| 1.3.6.1.4.1.5567.2.55.1.1 | TablersPingAtmCtlTable | not-accessible | current | Extends the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host. |
| 1.3.6.1.4.1.5567.2.55.1.1.1 | RowrsPingAtmCtlEntry | not-accessible | current | Defines an entry in the rsPingAtmCtlTable. The first index element pingCtlOwnerIndex isdefined in RFC2925. The second index pingCtlTestName is also defined in … |
| 1.3.6.1.4.1.5567.2.55.1.1.1.1 | ColumnrsPingAtmCtlPort | read-create | current | This indicates the system port of the virtual circuit that the OAM loopback cells would go out. |
| 1.3.6.1.4.1.5567.2.55.1.1.1.2 | ColumnrsPingAtmCtlVpi | read-create | current | This indicates the VPI of the virtual circuit that the OAM loopback cells would go out. |
| 1.3.6.1.4.1.5567.2.55.1.1.1.3 | ColumnrsPingAtmCtlVci | read-create | current | This indicates the VCI of the virtual circuit that the OAM loopback cells would go out. If this circuit is switched by VPI(F4), this object would only take in … |
| 1.3.6.1.4.1.5567.2.55.1.1.1.4 | ColumnrsPingAtmCtlFlowType | read-create | current | This indicates to the switch to send ATM OAM segment loopback or endToEnd loopback cells. This object only applies when the flow level is F5. For F4 circuit, s… |
| 1.3.6.1.4.1.5567.2.55.1.1.1.5 | ColumnrsPingAtmCtlLocationID | read-create | current | This object only applies if the flow type is segment. Use this object to identify which ATM network node in the circuit would the segment loopback occur. The d… |
| 1.3.6.1.4.1.5567.2.55.1.5 | TablersPingEtherOamCtlTable | not-accessible | current | Extends the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host by L2 MAC address. Restrictions: Followin… |
| 1.3.6.1.4.1.5567.2.55.1.5.1 | RowrsPingEtherOamCtlEntry | not-accessible | current | Defines an entry in the rsPingEtherOamCtlTable. The index elements pingCtlOwnerIndex and pngCtlTestName are defined in RFC2925. |
| 1.3.6.1.4.1.5567.2.55.1.5.1.1 | ColumnrsPingEtherOamCtlTargetAddress | read-create | current | Specifies the host L2 MAC address to be used at a remote host for performing a ping operation. A value for this object MUST be set prior to transitioning its c… |
| 1.3.6.1.4.1.5567.2.55.1.5.1.2 | ColumnrsPingEtherOamCtlVlanId | read-create | current | Vlan in which the frames will be transmitted. |
| 1.3.6.1.4.1.5567.2.55.1.5.1.3 | ColumnrsPingEtherOamCtlPriority | read-create | current | 802.1p priority value. |
| 1.3.6.1.4.1.5567.2.55.1.5.1.4 | ColumnrsPingEtherOamCtlContextId | read-create | current | Context Id in which the OAM frames will be transmitted. |
| 1.3.6.1.4.1.5567.2.55.1.6 | TablersPingLspLdpCtlTable | not-accessible | current | Extends the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host by LSP-LDP FEC. |
| 1.3.6.1.4.1.5567.2.55.1.6.1 | RowrsPingLspLdpCtlEntry | not-accessible | current | Defines an entry in the rsPingLspLdpCtlTable. The index elements pingCtlOwnerIndex and pngCtlTestName are defined in RFC2925. |
| 1.3.6.1.4.1.5567.2.55.1.6.1.1 | ColumnrsPingLspLdpCtlTgtMaskLen | read-create | current | Specifies the host mask in number of consecutive bits to be used at a remote host for performing a ping operation. A value for this object MUST be set prior to… |
| 1.3.6.1.4.1.5567.2.55.1.7 | TablersPingLspRsvpCtlTable | not-accessible | current | Extends the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host by LSP-RSVP Tunnel Id. |
| 1.3.6.1.4.1.5567.2.55.1.7.1 | RowrsPingLspRsvpCtlEntry | not-accessible | current | Defines an entry in the rsPingLspRsvpCtlTable. The index elements pingCtlOwnerIndex and pingCtlTestName are defined in RFC2925. |
| 1.3.6.1.4.1.5567.2.55.1.7.1.1 | ColumnrsPingLspRsvpCtlTgtTunnelId | read-create | current | Specifies the target tunnel Id to be used at a remote host for performing a ping operation. This object essentially replaces pingCtlTargetAddressType and pingC… |
| 1.3.6.1.4.1.5567.2.55.1.8 | TablersPingHVplsCtlTable | not-accessible | current | Extends the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host by L2 MAC address on a (h)vpls network. |
| 1.3.6.1.4.1.5567.2.55.1.8.1 | RowrsPingHVplsCtlEntry | not-accessible | current | Defines an entry in the rsPingHVplsCtlTable. The index elements pingCtlOwnerIndex and pingCtlTestName are defined in RFC2925. |
| 1.3.6.1.4.1.5567.2.55.1.8.1.1 | ColumnrsPingHVplsCtlTgtAddress | read-create | current | Specifies the host L2 MAC address to be used at a remote host for performing a ping operation. A value for this object MUST be set prior to transitioning its c… |
| 1.3.6.1.4.1.5567.2.55.1.8.1.2 | ColumnrsPingHVplsCtlVlanId | read-create | current | Vlan Id in which the OAM frames will be transmitted. |
| 1.3.6.1.4.1.5567.2.55.1.8.1.3 | ColumnrsPingHVplsCtlContextId | read-create | current | Context Id in which the OAM frames will be transmitted. |
| 1.3.6.1.4.1.5567.2.55.1.8.1.4 | ColumnrsPingHVplsCtlDirection | read-create | current | Direction of ping on a HVPLS network. |
| 1.3.6.1.4.1.5567.2.55.1.8.1.5 | ColumnrsPingHVplsCtlDomains | read-create | current | List of domains for a (H)VPLS network. |
| 1.3.6.1.4.1.5567.2.55.1.8.1.6 | ColumnrsPingHVplsCtlPriority | read-create | current | 802.1p priority value. |
| 1.3.6.1.4.1.5567.2.55.2 | NodersPingConformance | |||
| 1.3.6.1.4.1.5567.2.55.2.1 | NodersPingCompliances | |||
| 1.3.6.1.4.1.5567.2.55.2.1.1 | CompliancersPingCompliance | current | The compliance statement for RIVERSTONE-PING-EXTENSIONS-MIB. | |
| 1.3.6.1.4.1.5567.2.55.2.2 | NodersPingGroups | |||
| 1.3.6.1.4.1.5567.2.55.2.2.1 | GrouprsPingAtmCtlGroup | current | The group of objects that are needed for ATM OAM ping. | |
| 1.3.6.1.4.1.5567.2.55.2.2.5 | GrouprsPingEtherOamCtlGroup | current | The group of objects that are needed for Ethernet OAM ping. | |
| 1.3.6.1.4.1.5567.2.55.2.2.6 | GrouprsPingLspLdpCtlGroup | current | The group of objects that are needed for LSP LDP OAM ping. | |
| 1.3.6.1.4.1.5567.2.55.2.2.7 | GrouprsPingLspRsvpCtlGroup | current | The group of objects that are needed for LSP RSVP OAM ping. | |
| 1.3.6.1.4.1.5567.2.55.2.2.8 | GrouprsPingHVplsCtlGroup | current | The group of objects that are needed for HVPLS OAM ping. | |
| 1.3.6.1.4.1.5567.2.55.3 | NodersPingTypes | |||
| 1.3.6.1.4.1.5567.2.55.3.1 | IdentityrsPingAtmOamLoopback | current | Indicates that an implementation is using ATM OAM loopback. | |
| 1.3.6.1.4.1.5567.2.55.3.5 | IdentityrsPingEtherOam | current | Indicates that an implementation is using Ethernet OAM to find round trip time to remote host by L2 MAC address | |
| 1.3.6.1.4.1.5567.2.55.3.6 | IdentityrsPingLspLdpOam | current | Indicates that an implementation is using LSP LDP OAM to find round trip time to remote host by LSP-LDP FEC. | |
| 1.3.6.1.4.1.5567.2.55.3.7 | IdentityrsPingLspRsvpOam | current | Indicates that an implementation is using LSP RSVP OAM to find round trip time to remote host by LSP-RSVP Tunnel ID. | |
| 1.3.6.1.4.1.5567.2.55.3.8 | IdentityrsPingHVplsOam | current | Indicates that an implementation is using (H)VPLS OAM to find round trip time to remote host by L2 Mac address. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RsAtmFlowLevel | INTEGER { none(0), f4(4), f5(5) } | current | Indicate different ATM flow levels. The level VPI (F4) indicates the flow is switched by VPI by the network nodes, The level VCI (F5) indicates the flow is switched by VPI and VCI. |
| RsAtmOamFlowType | INTEGER { none(0), segment(3), endToEnd(4) } | current | Indicates different ATM OAM loopback flow types. An OAM loopback can either be segment or endToEnd. A segment flow covers part of the circuit. Only network nodes receive segment flows. A segment flow cannot end at a Cus… |
| RsAtmOamLocationID | OCTET STRING (SIZE (0..16)) | current | Indicate a location ID, which can be configured on each ATM switch to identify it. |