RIVERSTONE-RATELIMIT-MIB
134 objects
This mib module defines the Riverstone Networks enterpise MIB for rate limit module. http://www.riverstonenet.com/products. Copyright (C) Riverstone Networks, Inc 2000
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| RIVERSTONE-SMI-MIB | riverstoneMibs |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5567.2.25 | IdentityrsRateLimitMIB | This mib module defines the Riverstone Networks enterpise MIB for rate limit module. http://www.riverstonenet.com/products. Copyright (C) Riverstone Networks, … | ||
| 1.3.6.1.4.1.5567.2.25.0 | IdentityrsRateLimitNotifications | current | Group for Rate Limit related Notifications | |
| 1.3.6.1.4.1.5567.2.25.5 | IdentityrsTBMeter | current | Token Bucket Meter Table and associated objects | |
| 1.3.6.1.4.1.5567.2.25.5.1 | ScalarrsTBMeterLastChanged | read-only | current | The value of sysUpTime when last SET operation succeeds on this table. |
| 1.3.6.1.4.1.5567.2.25.5.2 | ScalarrsTBMeterCount | read-only | current | Total number of entries in the table |
| 1.3.6.1.4.1.5567.2.25.5.3 | ScalarrsTBMeterErrorMessage | read-only | current | Description of the error caused from the last SET operation that failed on this table |
| 1.3.6.1.4.1.5567.2.25.5.4 | TablersTBMeterTable | not-accessible | current | Token bucket service entry table |
| 1.3.6.1.4.1.5567.2.25.5.4.1 | RowrsTBMeterEntry | not-accessible | current | A record containing a token bucket service parameters. A new row can be created by setting the appropriate value in the table entry with RowStatus to CreateAnd… |
| 1.3.6.1.4.1.5567.2.25.5.4.1.1 | ColumnrsTBMeterId | not-accessible | current | The administratively assigned name to this Meter entry. This name must be unique across the rate-limit module including port based rate limit module Note: name… |
| 1.3.6.1.4.1.5567.2.25.5.4.1.2 | ColumnrsTBMeterType | read-create | current | The type of meter service. The value perFlow(1) indicates that this entry specifies a per L3 flow rate limit. For this type the rsTBMeterRate can take a value … |
| 1.3.6.1.4.1.5567.2.25.5.4.1.3 | ColumnrsTBMeterRate | read-create | current | Token Bucket rate in bits per second. Refer to the Description of rsTBMeterType for acceptable values. |
| 1.3.6.1.4.1.5567.2.25.5.4.1.4 | ColumnrsTBMeterBurst | read-create | current | The burst traffic rate (size) supported. This attribute is used only when rsTBMeterType is set to burstsafe(5) For RS platform rate ranges from 10000 to 100000… |
| 1.3.6.1.4.1.5567.2.25.5.4.1.5 | ColumnrsTBMeterInterval | read-create | deprecated | The time interval used with the token bucket. |
| 1.3.6.1.4.1.5567.2.25.5.4.1.6 | ColumnrsTBMeterFailAction | read-create | current | The fail action to take when the traffic rate exceeds rsTBMeterRate. If the Action value indicates TOS rewrite or TOS Precedence rewrite, appropriate rewrite v… |
| 1.3.6.1.4.1.5567.2.25.5.4.1.7 | ColumnrsTBMeterFailActionRewrite | read-create | current | TOS or TOS Precedence rewrite when the traffic exceeds rsTBMeterRate. rsTBMeterFailAction indicates this object value either TOS or TOS Precedence The object i… |
| 1.3.6.1.4.1.5567.2.25.5.4.1.8 | ColumnrsTBMeterBurstFailAction | read-create | current | The fail action to take when the traffic rate exceeds rsTBMeterBurst. If the Action value indicates TOS rewrite or TOS Precedence rewrite, appropriate rewrite … |
| 1.3.6.1.4.1.5567.2.25.5.4.1.9 | ColumnrsTBMeterBurstFailActionRewrite | read-create | current | TOS or TOS Precedence rewrite when the traffic exceeds rsTBMeterBurst, rsTBMeterBurstFailAction indicates this object value either TOS or TOS Precedence The ob… |
| 1.3.6.1.4.1.5567.2.25.5.4.1.10 | ColumnrsTBMeterMinimumBandwidth | read-create | deprecated | The minimum bandwidth to allocate for each flow when rsTBMeterType is 'softwareFlowAggreage' For RS platform rate ranges from 3000 to 1000000000. |
| 1.3.6.1.4.1.5567.2.25.5.4.1.11 | ColumnrsTBMeterDistributeAmong | read-create | deprecated | The rate-limit module allocates the minimum specified bandwidth to each matching flow,and the leftover bandwidth of rsTBMeterAccessRate will be distributed amo… |
| 1.3.6.1.4.1.5567.2.25.5.4.1.12 | ColumnrsTBMeterStorageType | read-create | current | Specify if entry should be persistent or not. |
| 1.3.6.1.4.1.5567.2.25.5.4.1.13 | ColumnrsTBMeterStatus | read-create | current | The RowStatus variable controls the activation, deactivation, or deletion of a meter. Writable variable may not be modified when the row is active. |
| 1.3.6.1.4.1.5567.2.25.10 | IdentityrsTBMeterApply | current | Meter Apply table and associated objects | |
| 1.3.6.1.4.1.5567.2.25.10.1 | ScalarrsTBMeterApplyLastChanged | read-only | current | The value of sysUpTime when last SET operation succeeds on this table |
| 1.3.6.1.4.1.5567.2.25.10.2 | ScalarrsTBMeterApplyCount | read-only | current | The current number of entries in rsTBMeterApplyTable |
| 1.3.6.1.4.1.5567.2.25.10.3 | ScalarrsTBMeterApplyErrorMessage | read-only | current | Description of the error of the last SET operations to fail on this table |
| 1.3.6.1.4.1.5567.2.25.10.4 | ScalarrsTBMeterApplyMasterAdminStatus | read-write | current | This object enables or disables all the entries in rsTBMeterApplyTable. This behaves like master fuse and do not change individual states of each row. User mus… |
| 1.3.6.1.4.1.5567.2.25.10.5 | TablersTBMeterApplyTable | not-accessible | current | This table associates rate limits with interfaces. In particular, a profile from the rsTBMeter table with name rsTBMeterId2 is applied on certain IP interfaces… |
| 1.3.6.1.4.1.5567.2.25.10.5.1 | RowrsTBMeterApplyEntry | not-accessible | current | 'ifIndex' is imported from IF-MIB. For RS platform, this value must point to an entry that has ifType of IP interface(126) ethernetCsmacd(6) L4 bridging MUST b… |
| 1.3.6.1.4.1.5567.2.25.10.5.1.1 | ColumnrsTBMeterApplyDirection | not-accessible | current | Interface traffic direction. |
| 1.3.6.1.4.1.5567.2.25.10.5.1.2 | ColumnrsTBMeterApplyAclName | not-accessible | current | Access Control List name or Classifier Name, Must exist on the underlying system before activation. |
| 1.3.6.1.4.1.5567.2.25.10.5.1.3 | ColumnrsTBMeterId2 | not-accessible | current | The meter id from rsTBMeterEntry.rsTBMeterId. rsTBMeterId must be an active row in rsTBMeterTable. |
| 1.3.6.1.4.1.5567.2.25.10.5.1.4 | ColumnrsTBMeterApplyOwner | read-create | current | The owner of this rate limit apply entry. The exact semantics of this string are subject to the security policy defined by the security administrator. If this … |
| 1.3.6.1.4.1.5567.2.25.10.5.1.5 | ColumnrsTBMeterApplyAdminStatus | read-create | current | The desired state of the rate limit entry. |
| 1.3.6.1.4.1.5567.2.25.10.5.1.6 | ColumnrsTBMeterApplyStorageType | read-create | current | Specify if entry should be persistent or not. |
| 1.3.6.1.4.1.5567.2.25.10.5.1.7 | ColumnrsTBMeterApplyStatus | read-create | current | Allows to create a new row and modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention |
| 1.3.6.1.4.1.5567.2.25.15 | IdentityrsTBMeterApplyMonitor | current | Group of token bucket rate limit monitor objects | |
| 1.3.6.1.4.1.5567.2.25.15.1 | TablersTBMeterMonitorTable | not-accessible | current | Table which carries exceed count for each token bucket meter applied on Access Control List. |
| 1.3.6.1.4.1.5567.2.25.15.1.1 | RowrsTBMeterMonitorEntry | not-accessible | current | This is a read only table of exceed count for each token bucket entry applied on Access Contol List. |
| 1.3.6.1.4.1.5567.2.25.15.1.1.1 | ColumnrsTBMeterExceedByteCount | read-only | current | Total number of bytes exceeded as a result of traffic rate limiting on a particular rsTBMeterApplyEntry entry. Discontinuities in the value of this counter can… |
| 1.3.6.1.4.1.5567.2.25.15.1.1.2 | ColumnrsTBMeterCounterDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which this counters suffered a discontinuity. If no such discontinuities have occurred since the last re-… |
| 1.3.6.1.4.1.5567.2.25.15.1.1.3 | ColumnrsTBMeterExceedPacketCount | read-only | current | Total number of packets exceeded the specified traffic rate limiting on a particular rsTBMeterApplyEntry entry. Discontinuities in the value of this counter ca… |
| 1.3.6.1.4.1.5567.2.25.15.1.1.4 | ColumnrsTBMeterExceedBurstPacketCount | read-only | current | Total number of packets exceeded the specified burst rate on a particular rsTBMeterApplyEntry entry. This is object is valid only when the rsTBMeterType is bur… |
| 1.3.6.1.4.1.5567.2.25.20 | IdentityrsPortRateLimit | current | Input and Output Port based rate limit tables | |
| 1.3.6.1.4.1.5567.2.25.20.1 | ScalarrsPortRLLastChanged | read-only | current | The value of sysUpTime when last SET operation succeeds on this table |
| 1.3.6.1.4.1.5567.2.25.20.2 | ScalarrsPortRLCount | read-only | current | The current number of entries in rsPortRLTable |
| 1.3.6.1.4.1.5567.2.25.20.3 | ScalarrsPortRLErrorMessage | read-only | current | Description of the error caused when the last SET operation failed on this table |
| 1.3.6.1.4.1.5567.2.25.20.4 | ScalarrsPortRLMasterAdminStatus | read-write | current | This object enables or disables all the entries in rsPortRLTable. This behaves like master fuse and do not change individual states of each row. User must chec… |
| 1.3.6.1.4.1.5567.2.25.20.5 | TablersPortRLTable | not-accessible | current | An entry which allows to create port based ratelimit service and to activate it on a physical port |
| 1.3.6.1.4.1.5567.2.25.20.5.1 | RowrsPortRLEntry | not-accessible | current | 'ifIndex' is imported from IF-MIB, which carries an index for physical port. For RS platform, this value must point to an entry that has ifType of ethernetCsma… |
| 1.3.6.1.4.1.5567.2.25.20.5.1.1 | ColumnrsPortRLDirection | not-accessible | current | Input/Output direction to apply rate limit on a port |
| 1.3.6.1.4.1.5567.2.25.20.5.1.2 | ColumnrsPortRLMeterId | not-accessible | current | Administratively assigned name to port based rate limit entry Note: name must be unique across the RS platform ratelimit module |
| 1.3.6.1.4.1.5567.2.25.20.5.1.3 | ColumnrsPortRLOwner | read-create | current | The owner of this entry. The exact semantics of this string are subject to the security policy defined by the security administrator. |
| 1.3.6.1.4.1.5567.2.25.20.5.1.4 | ColumnrsPortRLRate | read-create | current | Rate to limit port traffic to. For RS platform rate ranges from 3000 to 1000000000. |
| 1.3.6.1.4.1.5567.2.25.20.5.1.5 | ColumnrsPortRLFailAction | read-create | current | The action to take when the traffic rate exceeds rsPortRLRate. If the Action value indicates TOS rewrite or TOS Precedence rewrite, appropriate rewrite value s… |
| 1.3.6.1.4.1.5567.2.25.20.5.1.6 | ColumnrsPortRLFailActionRewrite | read-create | current | TOS or TOS Precedence rewrite when the traffic exceeds rsPortRLRate. rsPortRLFailAction indicates this object value either TOS or TOS Precedence The object is … |
| 1.3.6.1.4.1.5567.2.25.20.5.1.7 | ColumnrsPortRLInterval | read-create | deprecated | The time interval used with the token bucket. |
| 1.3.6.1.4.1.5567.2.25.20.5.1.8 | ColumnrsPortRLAdminStatus | read-create | current | The desired state of the rate limit entry. |
| 1.3.6.1.4.1.5567.2.25.20.5.1.9 | ColumnrsPortRLStorageType | read-create | current | Specify if entry should be persistent or not. |
| 1.3.6.1.4.1.5567.2.25.20.5.1.10 | ColumnrsPortRLStatus | read-create | current | Allows to create a new row and modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention |
| 1.3.6.1.4.1.5567.2.25.25 | IdentityrsPortRLMonitor | current | Group of port based rate limit monitor objects | |
| 1.3.6.1.4.1.5567.2.25.25.1 | TablersPortRLMonitorTable | not-accessible | current | Table which carries exceed count for each token bucket meter applied on the port based ones. |
| 1.3.6.1.4.1.5567.2.25.25.1.1 | RowrsPortRLMonitorEntry | not-accessible | current | This is a read only table of exceed count for each token bucket entry applied the port based ones. |
| 1.3.6.1.4.1.5567.2.25.25.1.1.1 | ColumnrsPortRLExceedByteCount | read-only | current | Total number of bytes exceeded as a result of traffic rate limiting on a particular rsPortRLEntry entry. Discontinuities in the value of this counter can occur… |
| 1.3.6.1.4.1.5567.2.25.25.1.1.2 | ColumnrsPortRLCounterDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which this counters suffered a discontinuity. If no such discontinuities have occurred since the last re-… |
| 1.3.6.1.4.1.5567.2.25.25.1.1.3 | ColumnrsPortRLExceedPacketCount | read-only | current | Total number of packets that exceeded the specified traffic rate limiting on a particular rsPortRLEntry entry. Discontinuities in the value of this counter can… |
| 1.3.6.1.4.1.5567.2.25.26 | IdentityrsL2RateLimit | current | L2 based rate limit tables | |
| 1.3.6.1.4.1.5567.2.25.26.1 | ScalarrsL2RLApplyLastChanged | read-only | current | The value of sysUpTime when last SET operation succeeds on this table |
| 1.3.6.1.4.1.5567.2.25.26.2 | ScalarrsL2RLApplyCount | read-only | current | The current number of entries in rsL2RLApplyTable |
| 1.3.6.1.4.1.5567.2.25.26.3 | ScalarrsL2RLApplyErrorMessage | read-only | current | Description of the error of the last SET operations to fail on this table |
| 1.3.6.1.4.1.5567.2.25.26.4 | ScalarrsL2RLApplyMasterAdminStatus | read-write | current | This object enables or disables all the entries in rsL2RLApplyTable. This behaves like master fuse and do not change individual states of each row. User must c… |
| 1.3.6.1.4.1.5567.2.25.26.5 | TablersL2RLApplyTable | not-accessible | current | This table associates rate limits with port / portgroups / filter / filtergroups. In particular, a profile from the rsTBMeter table with name rsTBMeterId is ap… |
| 1.3.6.1.4.1.5567.2.25.26.5.1 | RowrsL2RLApplyEntry | not-accessible | current | 'ifIndex' is imported from IF-MIB. For RS platform, this value must point to an entry that has ifType of ethernetCsmacd(6) The columns in this table are modifi… |
| 1.3.6.1.4.1.5567.2.25.26.5.1.1 | ColumnrsL2RLApplyDirection | not-accessible | current | Interface traffic direction. |
| 1.3.6.1.4.1.5567.2.25.26.5.1.2 | ColumnrsL2RLApplyIfIndex | not-accessible | current | When the service is applied on a single port, this value should be the ifIndex of the port where the service is applied. If it is applied on a group of ports, … |
| 1.3.6.1.4.1.5567.2.25.26.5.1.3 | ColumnrsL2RLApplyPortGroupName | not-accessible | current | This object identifies one or more rows in the rsRLPortGroupTable, when it of length nonzero. In this case the rsL2RLApplyIfIndex should be zero. If the servic… |
| 1.3.6.1.4.1.5567.2.25.26.5.1.4 | ColumnrsL2RLApplyFilterName | not-accessible | current | Filter name or Classifier Name, Must exist on the underlying system before activation. If rsL2RLIsFilterGroup is set to true, then this name specifies the filt… |
| 1.3.6.1.4.1.5567.2.25.26.5.1.5 | ColumnrsL2RLIsFilterGroup | read-create | current | When this value is set to true, then rsL2RLApplyFilterName specifies the group of filters mentioned in the rsRLFilterGroupTable. If set to false, the rsL2RLApp… |
| 1.3.6.1.4.1.5567.2.25.26.5.1.6 | ColumnrsL2RLApplyOnePGrouping | read-create | current | This object specifies the 802.1p priority groupings for which this service is to be applied. Currently, 4 different groups can be constructed and those priorit… |
| 1.3.6.1.4.1.5567.2.25.26.5.1.7 | ColumnrsL2RLApplyOwner | read-create | current | The owner of this rate limit apply entry. The exact semantics of this string are subject to the security policy defined by the security administrator. If this … |
| 1.3.6.1.4.1.5567.2.25.26.5.1.8 | ColumnrsL2RLApplyAdminStatus | read-create | current | The desired state of the rate limit entry. |
| 1.3.6.1.4.1.5567.2.25.26.5.1.9 | ColumnrsL2RLApplyStorageType | read-create | current | Specify if entry should be persistent or not. |
| 1.3.6.1.4.1.5567.2.25.26.5.1.10 | ColumnrsL2RLApplyStatus | read-create | current | Allows to create a new row and modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention |
| 1.3.6.1.4.1.5567.2.25.29 | IdentityrsL2RLMonitor | current | Group of l2 based rate limit monitor objects | |
| 1.3.6.1.4.1.5567.2.25.29.1 | TablersL2RLMonitorTable | not-accessible | current | Table which carries exceed count for each token bucket meter applied on L2 Filter or Filter Group. |
| 1.3.6.1.4.1.5567.2.25.29.1.1 | RowrsL2RLMonitorEntry | not-accessible | current | This is a read only table of exceed count for each token bucket entry applied on L2 Filter or Filter Groups. |
| 1.3.6.1.4.1.5567.2.25.29.1.1.1 | ColumnrsL2RLExceedByteCount | read-only | current | Total number of bytes that exceeded the specified traffic rate limiting on a particular rsL2RLApplyEntry entry. Discontinuities in the value of this counter ca… |
| 1.3.6.1.4.1.5567.2.25.29.1.1.2 | ColumnrsL2RLExceedPacketCount | read-only | current | Total number of packets that exceeded the specified traffic rate limiting on a particular rsL2RLApplyEntry entry. Discontinuities in the value of this counter … |
| 1.3.6.1.4.1.5567.2.25.29.1.1.3 | ColumnrsL2RLCounterDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which this counters suffered a discontinuity. If no such discontinuities have occurred since the last re-… |
| 1.3.6.1.4.1.5567.2.25.30 | IdentityrsRateLimitModes | current | Group of rate limit mode configuration on RS platform | |
| 1.3.6.1.4.1.5567.2.25.30.1 | ScalarrsRLModeLastChanged | read-only | current | The value of sysUpTime when last SET operation succeeds on this table |
| 1.3.6.1.4.1.5567.2.25.30.2 | TablersRLModeTable | not-accessible | current | Entry of rate limit mode and input port ratelimit state The rows in this table are created dynamically by inserting line cards in their respective slots of the… |
| 1.3.6.1.4.1.5567.2.25.30.2.1 | RowrsRLModeEntry | not-accessible | current | A record containing ratelimt mode on given module/slot. The columns in this entry are modifiable. This is indexed by entPhysicalIndex whose entPhysicalClass ==… |
| 1.3.6.1.4.1.5567.2.25.30.2.1.1 | ColumnrsRLModeType | read-write | current | Type of rate limit modes supported on this slot Value is writable only when rsRLModeCapabilityBits has rlMode(0) set to '1'. The table below relates the rateli… |
| 1.3.6.1.4.1.5567.2.25.30.2.1.2 | ColumnrsRLModeInputPortStatus | read-write | current | Input Port RateLimit status on this slot. Value is writable only when rsRLModeCapabilityBits has rlInputPortRateLimit set to '1'. |
| 1.3.6.1.4.1.5567.2.25.30.2.1.3 | ColumnrsRLModeCapabilityBits | read-only | current | Specifies the Module capability. rlMode(0) if set to 1 indicates the Module supports the Flow or Aggregate mode. rlInputPortRateLimit(1) if set to 1 indicates … |
| 1.3.6.1.4.1.5567.2.25.30.2.1.4 | ColumnrsRLModeEntryLastChanged | read-only | current | The value of sysUpTime when last SET operation succeeds on this entry |
| 1.3.6.1.4.1.5567.2.25.30.2.1.5 | ColumnrsRLModeStorageType | read-write | current | Storage type for this entry. |
| 1.3.6.1.4.1.5567.2.25.33 | IdentityrsRateLimitGroups | current | All different kinds of groupings used in RS rate limiting | |
| 1.3.6.1.4.1.5567.2.25.33.1 | ScalarrsRLPortGroupLastChanged | read-only | current | The value of sysUpTime when last SET operation succeeds on this table |
| 1.3.6.1.4.1.5567.2.25.33.2 | TablersRLPortGroupTable | not-accessible | current | This table is to associate one or more ports as a group. |
| 1.3.6.1.4.1.5567.2.25.33.2.1 | RowrsRLPortGroupEntry | not-accessible | current | A record containing group name and ifIndex. |
| 1.3.6.1.4.1.5567.2.25.33.2.1.1 | ColumnrsRLPortGroupName | not-accessible | current | The administratively assigned name to this PortGroup entry. |
| 1.3.6.1.4.1.5567.2.25.33.2.1.2 | ColumnrsRLPortGroupStorageType | read-only | current | Storage type for this entry. The value of this entry will be the same as the one specified in the row of rsL2RLApplyTable where this group is used. If none of … |
| 1.3.6.1.4.1.5567.2.25.33.2.1.3 | ColumnrsRLPortGroupStatus | read-create | current | Allows to create a new row and modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention |
| 1.3.6.1.4.1.5567.2.25.33.3 | ScalarrsRLFilterGroupLastChanged | read-only | current | The value of sysUpTime when last SET operation succeeds on this table |
| 1.3.6.1.4.1.5567.2.25.33.4 | TablersRLFilterGroupTable | not-accessible | current | This table is to associate one or more ports as a group. |
| 1.3.6.1.4.1.5567.2.25.33.4.1 | RowrsRLFilterGroupEntry | not-accessible | current | A record containing group name and filter name. |
| 1.3.6.1.4.1.5567.2.25.33.4.1.1 | ColumnrsRLFilterGroupName | not-accessible | current | The administratively assigned name to this FilterGroup entry. |
| 1.3.6.1.4.1.5567.2.25.33.4.1.2 | ColumnrsRLFilterName | not-accessible | current | The name of the filter part of this group. |
| 1.3.6.1.4.1.5567.2.25.33.4.1.3 | ColumnrsRLFilterGroupStorageType | read-only | current | Storage type for this entry. The value of this entry will be the same as the one specified in the row of rsL2RLApplyTable where this group is used. If none of … |
| 1.3.6.1.4.1.5567.2.25.33.4.1.4 | ColumnrsRLFilterGroupStatus | read-create | current | Allows to create a new row and modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention |
| 1.3.6.1.4.1.5567.2.25.35 | IdentityrsRateLimitConformance | current | rate limit conformance group | |
| 1.3.6.1.4.1.5567.2.25.35.1 | NodersRateLimitCompliances | |||
| 1.3.6.1.4.1.5567.2.25.35.1.1 | CompliancersRateLimitCompliance | deprecated | rsRateLimitGroup1 and rsRateLimitGroup2 is mandatory for implementation of this MIB. This compliance is deprecated and replaced by rsRateLimitComplianceV2 | |
| 1.3.6.1.4.1.5567.2.25.35.1.2 | CompliancersRateLimitComplianceV2 | read-only | current | rsRateLimitGroup1 and rsRateLimitGroup2 is mandatory for implementation of this MIB. This compliance is deprecated and replaced by rsRateLimitComplianceV2 |
| 1.3.6.1.4.1.5567.2.25.35.2 | NodersRateLimitGroup | |||
| 1.3.6.1.4.1.5567.2.25.35.2.1 | GrouprsRateLimitGroup1 | current | A set of managed objects that make up version 0.1 of the RS rate limit MIB Group. | |
| 1.3.6.1.4.1.5567.2.25.35.2.2 | GrouprsRateLimitGroup2 | current | A set of managed objects that make up version 0.1 of the RS rate limit MIB Group for port based rate limiting. | |
| 1.3.6.1.4.1.5567.2.25.35.2.3 | GrouprsRateLimitGroup3 | current | This group is mandatory for all RS platforms that support port or interface based rate limits | |
| 1.3.6.1.4.1.5567.2.25.35.2.4 | GrouprsRateLimitGroup4 | deprecated | This optional group applies to RS Product line that supports dual rate token bucket metering (aka Burst Safe (tm) This group is replaced by rsRateLimitGroup4V2 | |
| 1.3.6.1.4.1.5567.2.25.35.2.5 | GrouprsRateLimitGroup5 | deprecated | Optional Group of rate limit monitor objects. This group is replaced by rsRateLimitGroup5V2. | |
| 1.3.6.1.4.1.5567.2.25.35.2.6 | GrouprsRateLimitGroup4V2 | current | This optional group applies to RS Product line that supports dual rate token bucket metering (aka Burst Safe (tm) | |
| 1.3.6.1.4.1.5567.2.25.35.2.7 | GrouprsRateLimitGroup5V2 | current | Optional Group of rate limit monitor objects | |
| 1.3.6.1.4.1.5567.2.25.35.2.8 | GrouprsRateLimitGroup6 | current | A set of managed objects that make up version 0.2 of the RS rate limit MIB Group for l2 based rate limiting. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RsAction | INTEGER { noAction(1), dropPackets(2), setPriorityLow(3), setPriorityMedium(4), setPriorityHigh(5), lowerPriority(6), lowerPriorityExceptControl(7), tosRewrite(8), tosRewriteAndLowerPriority(9), tosPrecedenceRewrite(10), tosPrecedenceRewriteAndLowerPriority(11), markPackets(12) } rsRateLimitNotifications OBJECT-IDENTITY STATUS current DESCRIPTION "Group for Rate Limit related Notifications" ::= { rsRateLimitMIB 0 } rsTBMeter OBJECT-IDENTITY STATUS current DESCRIPTION "Token Bucket Meter Table and associated objects" REFERENCE "Refer Riverstone Networks white paper 'An Overview of RateLimiting' for more details" ::= { rsRateLimitMIB 5 } rsTBMeterApply OBJECT-IDENTITY STATUS current DESCRIPTION " Meter Apply table and associated objects" REFERENCE "Refer Riverstone Networks white paper 'An Overview of RateLimiting' for more details" ::= { rsRateLimitMIB 10 } rsTBMeterApplyMonitor OBJECT-IDENTITY STATUS current DESCRIPTION " Group of token bucket rate limit monitor objects " ::= { rsRateLimitMIB 15 } rsPortRateLimit OBJECT-IDENTITY STATUS current DESCRIPTION "Input and Output Port based rate limit tables" REFERENCE "Refer Riverstone Networks white paper 'An Overview of RateLimiting' for more details" ::= { rsRateLimitMIB 20 } rsPortRLMonitor OBJECT-IDENTITY STATUS current DESCRIPTION " Group of port based rate limit monitor objects " ::= { rsRateLimitMIB 25 } rsL2RateLimit OBJECT-IDENTITY STATUS current DESCRIPTION "L2 based rate limit tables" ::= { rsRateLimitMIB 26 } rsL2RLMonitor OBJECT-IDENTITY STATUS current DESCRIPTION " Group of l2 based rate limit monitor objects " ::= { rsRateLimitMIB 29 } rsRateLimitModes OBJECT-IDENTITY STATUS current DESCRIPTION " Group of rate limit mode configuration on RS platform " ::= { rsRateLimitMIB 30 } rsRateLimitGroups OBJECT-IDENTITY STATUS current DESCRIPTION " All different kinds of groupings used in RS rate limiting" ::= { rsRateLimitMIB 33 } rsRateLimitConformance OBJECT-IDENTITY STATUS current DESCRIPTION "rate limit conformance group " ::= { rsRateLimitMIB 35 } | current | Different actions allowed on the RS switch router Can be associated with rsTBMeterTable, or rsPortRLTable for rate limit purposes Note: not all the actions may be applicable to all the modules |
| RsAdminStatus | INTEGER { enabled(1), disabled(2) } | current | Specifies the administrative status enabled or disabled |
| RsBurst | Unsigned32 | current | Burst traffic rate on the selected traffic flow is specified using this data type. For RS platform, the valid range is 10,000..1000000000 bits per second. This is used for dual token bucket meter or Burst Safe(TM) meter |
| RsDistAmong | Integer32(1..10) | deprecated | Distribute the unused 'bandwidth' among n number of flows, keeping a minimum specified bandwidth For example if the Software based AggregateRate is 10,000,000 MinBandwidth is 500,000 for each flow and Number of flows is… |
| RsIfDirection | INTEGER { inbound(1), outbound(2), both(3), unknown(4) } | current | Specifies a direction of data travel on interface. 'inbound' traffic is operated on during reception from the interface, while 'outbound' traffic is operated on prior to transmission on the interface. 'both' traffic is … |
| RsLabel | OCTET STRING (SIZE(1..30)) | current | ASCII character which are Letters,Digits and Under Scores Strings beginning with Digits and Underscores are not allowed |
| RsMeterInterval | Integer32(0..10) | deprecated | RS rate limiting is based on credit bucket scheme. A bucket is filled with certain number of credits, and credits are deducted over a given time period. When the time period is expired, the bucket is filled again with t… |
| RsMeterType | INTEGER { perFlow(1), softwareFlowAggregate(2), hardwareFlowAggregate(3), perPort(4), burstsafe(5), l2(6) } | current | The type of meter service. The value perFlow(1) indicates that this entry specifies a per L3 flow rate limit. softwareFlowAggregate(2) indicates that this entry specifies a software based rate limit aggregate. This is d… |
| RsRateLimit | Unsigned32 | current | Rate limit on the selected traffic flow is specified using this data type. For RS Platform, this value can be set from 3000..1000000000 bits per second on all line cards. |
| RsTOS | Integer32 (0..255) | current | In IPv4 its the TOS byte of IP packet header. Unsigned integer value which can be mapped to TOS or DSCP depending on the associated rate limit action type |