MIB Viewer

RMONitor-MIB

35 objects
No module-level DESCRIPTION found.
OIDNameAccessStatusDescription
1.3.6.1.2.1Nodemib-2
1.3.6.1.4.1.2Nodeibm
1.3.6.1.4.1.2.6NodeibmProd
1.3.6.1.4.1.2.6.45Nodermonitor
1.3.6.1.4.1.2.6.45.1Nodesecurity
1.3.6.1.4.1.2.6.45.2Nodeprotocols
1.3.6.1.4.1.2.6.45.2.1TableprotocolDistControlTablenot-accessiblemandatory
1.3.6.1.4.1.2.6.45.2.1.1RowprotocolDistControlEntrynot-accessiblemandatory
1.3.6.1.4.1.2.6.45.2.1.1.1ColumnprotocolDistControlIndexread-onlymandatory
1.3.6.1.4.1.2.6.45.2.1.1.2ColumnprotocolDistControlDataSourceread-writemandatoryThis object identifies the source of the data for which protocol distribution data is collected. This source can be any interface on this device. In order to i…
1.3.6.1.4.1.2.6.45.2.1.1.3ColumnprotocolDistControlLastDeleteTimeread-onlymandatory
1.3.6.1.4.1.2.6.45.2.1.1.4ColumnprotocolDistControlOwnerread-writemandatoryThe entity that created this entry in the protocol distribution control table, and is therefore using the resources associated with it.
1.3.6.1.4.1.2.6.45.2.1.1.5ColumnprotocolDistControlStatusread-writemandatoryThe status of this protocol distribution control entry.
1.3.6.1.4.1.2.6.45.2.2TableprotocolDistTablenot-accessiblemandatoryA table of protocol types and associated counts including entries for each different protocol seen by the monitor. Note that protocols are identified by examin…
1.3.6.1.4.1.2.6.45.2.2.1RowprotocolDistEntrynot-accessiblemandatoryA set of counts maintained for each different protocol seen by the agent.
1.3.6.1.4.1.2.6.45.2.2.1.1ColumnprotocolDistIndexread-onlymandatoryA value uniquely identifying this protocol distribution control table entry.
1.3.6.1.4.1.2.6.45.2.2.1.2ColumnprotocolDistEthertyperead-onlymandatoryA protocol type identified by the 'ethertype' field found in DIX Ethernet, or in the SNAP protocol on IEEE 802 networks or the DSAP protocol on 802.5 networks.
1.3.6.1.4.1.2.6.45.2.2.1.3ColumnprotocolDistPktsread-onlymandatoryA count of the number of packets seen using the protocol identified by the corresponding protocolDistEthertype.
1.3.6.1.4.1.2.6.45.2.2.1.4ColumnprotocolDistOctetsread-onlymandatoryA count of the number of octets in packets seen using the protocol identified by the corresponding protocolDistEthertype.
1.3.6.1.5.1TableauthTablenot-accessiblemandatoryThe entries for the authentication table.
1.3.6.1.5.1.1RowauthEntrynot-accessiblemandatoryThe entries for authentication table.
1.3.6.1.5.1.1.1ColumnauthCommunityread-writemandatoryThe community string identifying an authentic/authorized manager.
1.3.6.1.5.1.1.2ColumnauthTypeAccessread-writemandatoryThe type of access allowed for the community string identifying an authentic/authorized manager.
1.3.6.1.5.1.1.3ColumnauthActionsread-writemandatoryThe action on a row of the authentication table.
1.3.6.1.5.2TablesubscriptTableread-writemandatoryThe entries for the subscription table.
1.3.6.1.5.2.1RowsubscriptEntryread-writemandatoryThe entries for subscription table.
1.3.6.1.5.2.1.1ColumnsubscriptIpAddressread-writemandatoryThe IP address of the manager subscribing to traps.
1.3.6.1.5.2.1.2ColumnsubscriptCommunityread-writemandatoryThe community string to be used in trap PDUs sent to the subscribing manager.
1.3.6.1.5.2.1.3ColumnsubscriptActionsread-writemandatoryThe action on a row of the subscription table.
1.3.6.1.5.3TableauthFailTableread-writemandatoryThe entries for the authentication failure table.
1.3.6.1.5.3.1RowauthFailEntryread-writemandatoryThe entries for authentication failure table.
1.3.6.1.5.3.1.1ColumnauthFailIndexread-onlymandatoryThe index for this entry in the authentication failure table.
1.3.6.1.5.3.1.2ColumnauthFailIPAddressread-onlymandatoryThe IP address of the manager that sent the SNMP request that caused the authentication failure.
1.3.6.1.5.3.1.3ColumnauthFailCommunityread-onlymandatoryThe community string used in the SNMP request that caused the authentication failure.
Type Definitions
NameSyntaxStatusDescription
EntryStatusINTEGER { valid(1), createRequest(2), underCreation(3), invalid(4) }