RMS-COMPACT-SNMPv1-MAIN-MIB
274 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString sysDescr sysName |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3711 | Nodesinetica | |||
| 1.3.6.1.4.1.3711.15 | Noderms-compact | |||
| 1.3.6.1.4.1.3711.15.1 | Noderms-compact1 | |||
| 1.3.6.1.4.1.3711.15.1.1 | Noderms-cObjects | |||
| 1.3.6.1.4.1.3711.15.1.1.1 | Noderms-cEnviroment | |||
| 1.3.6.1.4.1.3711.15.1.1.1.1 | Noderms-cTemp1 | |||
| 1.3.6.1.4.1.3711.15.1.1.1.1.1 | Scalarrms-cTemp1EnableMonitoring | read-write | mandatory | Setting to one enables monitoring of Temperature |
| 1.3.6.1.4.1.3711.15.1.1.1.1.2 | Scalarrms-cTemp1Name | read-write | mandatory | The name of the temperature reading |
| 1.3.6.1.4.1.3711.15.1.1.1.1.3 | Scalarrms-cTemp1CalibrationOffset | read-write | mandatory | Calibration offset in 0.1 degrees |
| 1.3.6.1.4.1.3711.15.1.1.1.1.4 | Scalarrms-cTemp1Current | read-only | mandatory | The current temperature reading in 0.1% |
| 1.3.6.1.4.1.3711.15.1.1.1.1.5 | Noderms-cTemp1Thresholds | |||
| 1.3.6.1.4.1.3711.15.1.1.1.1.5.1 | Scalarrms-cTemp1LowerControlLevel | read-write | mandatory | The Lower Limit temperature threshold in 0.1 degrees |
| 1.3.6.1.4.1.3711.15.1.1.1.1.5.2 | Scalarrms-cTemp1LowerWarningLevel | read-write | mandatory | The Lower Control temperature threshold in 0.1 degrees |
| 1.3.6.1.4.1.3711.15.1.1.1.1.5.3 | Scalarrms-cTemp1UpperWarningLevel | read-write | mandatory | The Upper Control temperature threshold in 0.1 degrees |
| 1.3.6.1.4.1.3711.15.1.1.1.1.5.4 | Scalarrms-cTemp1UpperControlLevel | read-write | mandatory | The Upper Limit temperature threshold in 0.1 degrees |
| 1.3.6.1.4.1.3711.15.1.1.1.1.6 | Noderms-cTemp1OFFtoONtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.1.1.6.1 | Scalarrms-cTemp1OFFtoONtrapLCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.1.6.2 | Scalarrms-cTemp1OFFtoONontrapLWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.1.6.3 | Scalarrms-cTemp1OFFtoONtrapUWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.1.6.4 | Scalarrms-cTemp1OFFtoONtrapUCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.1.7 | Noderms-cTemp1OFFtoONrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.1.1.7.1 | Scalarrms-cTemp1OFFtoONrepLCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes |
| 1.3.6.1.4.1.3711.15.1.1.1.1.7.2 | Scalarrms-cTemp1OFFtoONrepLWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes |
| 1.3.6.1.4.1.3711.15.1.1.1.1.7.3 | Scalarrms-cTemp1OFFtoONrepUWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes |
| 1.3.6.1.4.1.3711.15.1.1.1.1.7.4 | Scalarrms-cTemp1OFFtoONrepUCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes |
| 1.3.6.1.4.1.3711.15.1.1.1.1.8 | Noderms-cTemp1ONtoOFFtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.1.1.8.1 | Scalarrms-cTemp1ONtoOFFtrapLCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.1.8.2 | Scalarrms-cTemp1ONtoOFFtrapLWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.1.8.3 | Scalarrms-cTemp1ONtoOFFtrapUWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.1.8.4 | Scalarrms-cTemp1ONtoOFFtrapUCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.1.9 | Noderms-cTemp1ONtoOFFrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.1.1.9.1 | Scalarrms-cTemp1ONtoOFFrepLCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.1.9.2 | Scalarrms-cTemp1ONtoOFFrepLWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.1.9.3 | Scalarrms-cTemp1ONtoOFFrepUWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.1.9.4 | Scalarrms-cTemp1ONtoOFFrepUCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.1.101 | Noderms-cTemp1LowControlLimitAlarm | Temperature is below the low control limit. | ||
| 1.3.6.1.4.1.3711.15.1.1.1.1.102 | Noderms-cTemp1LowWarningLimitAlarm | Temperature is below the low warning limit. | ||
| 1.3.6.1.4.1.3711.15.1.1.1.1.103 | Noderms-cTemp1HighWarningLimitAlarm | Temperature is over the high warning limit. | ||
| 1.3.6.1.4.1.3711.15.1.1.1.1.104 | Noderms-cTemp1HighControlLimitAlarm | Temperature is over the high control limit. | ||
| 1.3.6.1.4.1.3711.15.1.1.1.1.105 | Noderms-cTemp1LowControlLimitNormal | Temperature is inside the low control limit. | ||
| 1.3.6.1.4.1.3711.15.1.1.1.1.106 | Noderms-cTemp1LowWarningLimitNormal | Temperature is inside the low warning limit. | ||
| 1.3.6.1.4.1.3711.15.1.1.1.1.107 | Noderms-cTemp1HighWarningLimitNormal | Temperature is inside the high warning limit. | ||
| 1.3.6.1.4.1.3711.15.1.1.1.1.108 | Noderms-cTemp1HighControlLimitNormal | Temperature is inside the high control limit. | ||
| 1.3.6.1.4.1.3711.15.1.1.1.2 | Noderms-cHumid1 | |||
| 1.3.6.1.4.1.3711.15.1.1.1.2.1 | Scalarrms-cHumid1EnableMonitoring | read-write | mandatory | Setting to one enables monitoring of Humidity |
| 1.3.6.1.4.1.3711.15.1.1.1.2.2 | Scalarrms-cHumid1Name | read-write | mandatory | The name of the humidity reading |
| 1.3.6.1.4.1.3711.15.1.1.1.2.3 | Scalarrms-cHumid1CalibrationOffset | read-write | mandatory | Calibration offset in 0.1 percent |
| 1.3.6.1.4.1.3711.15.1.1.1.2.4 | Scalarrms-cHumid1Current | read-only | mandatory | The current humidity reading in 0.1% |
| 1.3.6.1.4.1.3711.15.1.1.1.2.5 | Noderms-cHumid1Thresholds | |||
| 1.3.6.1.4.1.3711.15.1.1.1.2.5.1 | Scalarrms-cHumid1LowerControlLevel | read-write | mandatory | The Lower Limit Humidity threshold in 0.1 percent |
| 1.3.6.1.4.1.3711.15.1.1.1.2.5.2 | Scalarrms-cHumid1LowerWarningLevel | read-write | mandatory | The Lower Control humidity threshold in 0.1 percent |
| 1.3.6.1.4.1.3711.15.1.1.1.2.5.3 | Scalarrms-cHumid1UpperWarningLevel | read-write | mandatory | The Upper Control humidity threshold in 0.1 percent |
| 1.3.6.1.4.1.3711.15.1.1.1.2.5.4 | Scalarrms-cHumid1UpperControlLevel | read-write | mandatory | The Upper Limit humidity threshold in 0.1 percent |
| 1.3.6.1.4.1.3711.15.1.1.1.2.6 | Noderms-cHumid1OFFtoONtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.1.2.6.1 | Scalarrms-cHumid1OFFtoONtrapLCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.2.6.2 | Scalarrms-cHumid1OFFtoONtrapLWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.2.6.3 | Scalarrms-cHumid1OFFtoONtrapUWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.2.6.4 | Scalarrms-cHumid1OFFtoONtrapUCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.2.7 | Noderms-cHumid1OFFtoONrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.1.2.7.1 | Scalarrms-cHumid1OFFtoONrepLCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.2.7.2 | Scalarrms-cHumid1OFFtoONrepLWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.2.7.3 | Scalarrms-cHumid1OFFtoONrepUWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.2.7.4 | Scalarrms-cHumid1OFFtoONrepUCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.2.8 | Noderms-cHumid1ONtoOFFtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.1.2.8.1 | Scalarrms-cHumid1ONtoOFFtrapLCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.2.8.2 | Scalarrms-cHumid1ONtoOFFtrapLWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.2.8.3 | Scalarrms-cHumid1ONtoOFFtrapUWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.2.8.4 | Scalarrms-cHumid1ONtoOFFtrapUCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.2.9 | Noderms-cHumid1ONtoOFFrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.1.2.9.1 | Scalarrms-cHumid1ONtoOFFrepLCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.2.9.2 | Scalarrms-cHumid1ONtoOFFrepLWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.2.9.3 | Scalarrms-cHumid1ONtoOFFrepUWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.2.9.4 | Scalarrms-cHumid1ONtoOFFrepUCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.3 | Noderms-cTemp2 | |||
| 1.3.6.1.4.1.3711.15.1.1.1.3.1 | Scalarrms-cTemp2EnableMonitoring | read-write | mandatory | Setting to one enables monitoring of Temperature |
| 1.3.6.1.4.1.3711.15.1.1.1.3.2 | Scalarrms-cTemp2Name | read-write | mandatory | The name of the temperature reading |
| 1.3.6.1.4.1.3711.15.1.1.1.3.3 | Scalarrms-cTemp2CalibrationOffset | read-write | mandatory | Calibration offset in 0.1 degrees |
| 1.3.6.1.4.1.3711.15.1.1.1.3.4 | Scalarrms-cTemp2Current | read-only | mandatory | The current temperature reading in 0.1% |
| 1.3.6.1.4.1.3711.15.1.1.1.3.5 | Noderms-cTemp2Thresholds | |||
| 1.3.6.1.4.1.3711.15.1.1.1.3.5.1 | Scalarrms-cTemp2LowerControlLevel | read-write | mandatory | The Lower Limit temperature threshold in 0.1 degrees |
| 1.3.6.1.4.1.3711.15.1.1.1.3.5.2 | Scalarrms-cTemp2LowerWarningLevel | read-write | mandatory | The Lower Control temperature threshold in 0.1 degrees |
| 1.3.6.1.4.1.3711.15.1.1.1.3.5.3 | Scalarrms-cTemp2UpperWarningLevel | read-write | mandatory | The Upper Control temperature threshold in 0.1 degrees |
| 1.3.6.1.4.1.3711.15.1.1.1.3.5.4 | Scalarrms-cTemp2UpperControlLevel | read-write | mandatory | The Upper Limit temperature threshold in 0.1 degrees |
| 1.3.6.1.4.1.3711.15.1.1.1.3.6 | Noderms-cTemp2OFFtoONtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.1.3.6.1 | Scalarrms-cTemp2OFFtoONtrapLCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.3.6.2 | Scalarrms-cTemp2OFFtoONontrapLWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.3.6.3 | Scalarrms-cTemp2OFFtoONtrapUWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.3.6.4 | Scalarrms-cTemp2OFFtoONtrapUCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.3.7 | Noderms-cTemp2OFFtoONrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.1.3.7.1 | Scalarrms-cTemp2OFFtoONrepLCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.3.7.2 | Scalarrms-cTemp2OFFtoONrepLWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.3.7.3 | Scalarrms-cTemp2OFFtoONrepUWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.3.7.4 | Scalarrms-cTemp2OFFtoONrepUCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.3.8 | Noderms-cTemp2ONtoOFFtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.1.3.8.1 | Scalarrms-cTemp2ONtoOFFtrapLCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.3.8.2 | Scalarrms-cTemp2ONtoOFFtrapLWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.3.8.3 | Scalarrms-cTemp2ONtoOFFtrapUWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.3.8.4 | Scalarrms-cTemp2ONtoOFFtrapUCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.3.9 | Noderms-cTemp2ONtoOFFrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.1.3.9.1 | Scalarrms-cTemp2ONtoOFFrepLCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.3.9.2 | Scalarrms-cTemp2ONtoOFFrepLWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.3.9.3 | Scalarrms-cTemp2ONtoOFFrepUWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.3.9.4 | Scalarrms-cTemp2ONtoOFFrepUCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.4 | Noderms-cHumid2 | |||
| 1.3.6.1.4.1.3711.15.1.1.1.4.1 | Scalarrms-cHumid2EnableMonitoring | read-write | mandatory | Setting to one enables monitoring of Humidity |
| 1.3.6.1.4.1.3711.15.1.1.1.4.2 | Scalarrms-cHumid2Name | read-write | mandatory | The name of the humidity reading |
| 1.3.6.1.4.1.3711.15.1.1.1.4.3 | Scalarrms-cHumid2CalibrationOffset | read-write | mandatory | Calibration offset in 0.1 percent |
| 1.3.6.1.4.1.3711.15.1.1.1.4.4 | Scalarrms-cHumid2Current | read-only | mandatory | The current humidity reading in 0.1% |
| 1.3.6.1.4.1.3711.15.1.1.1.4.5 | Noderms-cHumid2Thresholds | |||
| 1.3.6.1.4.1.3711.15.1.1.1.4.5.1 | Scalarrms-cHumid2LowerControlLevel | read-write | mandatory | The Lower Limit Humidity threshold in 0.1 percent |
| 1.3.6.1.4.1.3711.15.1.1.1.4.5.2 | Scalarrms-cHumid2LowerWarningLevel | read-write | mandatory | The Lower Control humidity threshold in 0.1 percent |
| 1.3.6.1.4.1.3711.15.1.1.1.4.5.3 | Scalarrms-cHumid2UpperWarningLevel | read-write | mandatory | The Upper Control humidity threshold in 0.1 percent |
| 1.3.6.1.4.1.3711.15.1.1.1.4.5.4 | Scalarrms-cHumid2UpperControlLevel | read-write | mandatory | The Upper Limit humidity threshold in 0.1 percent |
| 1.3.6.1.4.1.3711.15.1.1.1.4.6 | Noderms-cHumid2OFFtoONtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.1.4.6.1 | Scalarrms-cHumid2OFFtoONtrapLCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.4.6.2 | Scalarrms-cHumid2OFFtoONtrapLWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.4.6.3 | Scalarrms-cHumid2OFFtoONtrapUWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.4.6.4 | Scalarrms-cHumid2OFFtoONtrapUCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.4.7 | Noderms-cHumid2OFFtoONrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.1.4.7.1 | Scalarrms-cHumid2OFFtoONrepLCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.4.7.2 | Scalarrms-cHumid2OFFtoONrepLWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.4.7.3 | Scalarrms-cHumid2OFFtoONrepUWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.4.7.4 | Scalarrms-cHumid2OFFtoONrepUCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.4.8 | Noderms-cHumid2ONtoOFFtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.1.4.8.1 | Scalarrms-cHumid2ONtoOFFtrapLCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.4.8.2 | Scalarrms-cHumid2ONtoOFFtrapLWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.4.8.3 | Scalarrms-cHumid2ONtoOFFtrapUWL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.4.8.4 | Scalarrms-cHumid2ONtoOFFtrapUCL | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.1.4.9 | Noderms-cHumid2ONtoOFFrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.1.4.9.1 | Scalarrms-cHumid2ONtoOFFrepLCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.4.9.2 | Scalarrms-cHumid2ONtoOFFrepLWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.4.9.3 | Scalarrms-cHumid2ONtoOFFrepUWL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.1.4.9.4 | Scalarrms-cHumid2ONtoOFFrepUCL | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2 | Noderms-cContact | |||
| 1.3.6.1.4.1.3711.15.1.1.2.1 | Noderms-cContactNames | |||
| 1.3.6.1.4.1.3711.15.1.1.2.1.1 | Scalarrms-cContact1Name | read-write | mandatory | The name of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.1.2 | Scalarrms-cContact2Name | read-write | mandatory | The name of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.1.3 | Scalarrms-cContact3Name | read-write | mandatory | The name of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.1.4 | Scalarrms-cContact4Name | read-write | mandatory | The name of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.1.5 | Scalarrms-cContact5Name | read-write | mandatory | The name of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.1.6 | Scalarrms-cContact6Name | read-write | mandatory | The name of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.1.7 | Scalarrms-cContact7Name | read-write | mandatory | The name of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.1.8 | Scalarrms-cContact8Name | read-write | mandatory | The name of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.2 | Noderms-cContactType | |||
| 1.3.6.1.4.1.3711.15.1.1.2.2.1 | Scalarrms-cContact1Type | read-write | mandatory | Level or posedge or negedge input detection |
| 1.3.6.1.4.1.3711.15.1.1.2.2.2 | Scalarrms-cContact2Type | read-write | mandatory | Level or posedge or negedge input detection |
| 1.3.6.1.4.1.3711.15.1.1.2.2.3 | Scalarrms-cContact3Type | read-write | mandatory | Level or posedge or negedge input detection |
| 1.3.6.1.4.1.3711.15.1.1.2.2.4 | Scalarrms-cContact4Type | read-write | mandatory | Level or posedge or negedge input detection |
| 1.3.6.1.4.1.3711.15.1.1.2.2.5 | Scalarrms-cContact5Type | read-write | mandatory | Level or posedge or negedge input detection |
| 1.3.6.1.4.1.3711.15.1.1.2.2.6 | Scalarrms-cContact6Type | read-write | mandatory | Level or posedge or negedge input detection |
| 1.3.6.1.4.1.3711.15.1.1.2.2.7 | Scalarrms-cContact7Type | read-write | mandatory | Level or posedge or negedge input detection |
| 1.3.6.1.4.1.3711.15.1.1.2.2.8 | Scalarrms-cContact8Type | read-write | mandatory | Level or posedge or negedge input detection |
| 1.3.6.1.4.1.3711.15.1.1.2.3 | Noderms-cContactReset | |||
| 1.3.6.1.4.1.3711.15.1.1.2.3.1 | Scalarrms-cContact1Reset | write-only | mandatory | Resets edge triggered input |
| 1.3.6.1.4.1.3711.15.1.1.2.3.2 | Scalarrms-cContact2Reset | write-only | mandatory | Resets edge triggered input |
| 1.3.6.1.4.1.3711.15.1.1.2.3.3 | Scalarrms-cContact3Reset | write-only | mandatory | Resets edge triggered input |
| 1.3.6.1.4.1.3711.15.1.1.2.3.4 | Scalarrms-cContact4Reset | write-only | mandatory | Resets edge triggered input |
| 1.3.6.1.4.1.3711.15.1.1.2.3.5 | Scalarrms-cContact5Reset | write-only | mandatory | Resets edge triggered input |
| 1.3.6.1.4.1.3711.15.1.1.2.3.6 | Scalarrms-cContact6Reset | write-only | mandatory | Resets edge triggered input |
| 1.3.6.1.4.1.3711.15.1.1.2.3.7 | Scalarrms-cContact7Reset | write-only | mandatory | Resets edge triggered input |
| 1.3.6.1.4.1.3711.15.1.1.2.3.8 | Scalarrms-cContact8Reset | write-only | mandatory | Resets edge triggered input |
| 1.3.6.1.4.1.3711.15.1.1.2.4 | Noderms-cContactNormalStates | |||
| 1.3.6.1.4.1.3711.15.1.1.2.4.1 | Scalarrms-cContact1NormalState | read-write | mandatory | Set to 0 for normally open condition, 1 for normally closed |
| 1.3.6.1.4.1.3711.15.1.1.2.4.2 | Scalarrms-cContact2NormalState | read-write | mandatory | Set to 0 for normally open condition, 1 for normally closed |
| 1.3.6.1.4.1.3711.15.1.1.2.4.3 | Scalarrms-cContact3NormalState | read-write | mandatory | Set to 0 for normally open condition, 1 for normally closed |
| 1.3.6.1.4.1.3711.15.1.1.2.4.4 | Scalarrms-cContact4NormalState | read-write | mandatory | Set to 0 for normally open condition, 1 for normally closed |
| 1.3.6.1.4.1.3711.15.1.1.2.4.5 | Scalarrms-cContact5NormalState | read-write | mandatory | Set to 0 for normally open condition, 1 for normally closed |
| 1.3.6.1.4.1.3711.15.1.1.2.4.6 | Scalarrms-cContact6NormalState | read-write | mandatory | Set to 0 for normally open condition, 1 for normally closed |
| 1.3.6.1.4.1.3711.15.1.1.2.4.7 | Scalarrms-cContact7NormalState | read-write | mandatory | Set to 0 for normally open condition, 1 for normally closed |
| 1.3.6.1.4.1.3711.15.1.1.2.4.8 | Scalarrms-cContact8NormalState | read-write | mandatory | Set to 0 for normally open condition, 1 for normally closed |
| 1.3.6.1.4.1.3711.15.1.1.2.5 | Noderms-cContactCurrentStates | |||
| 1.3.6.1.4.1.3711.15.1.1.2.5.1 | Scalarrms-cContact1CurrentState | read-only | mandatory | The current state of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.5.2 | Scalarrms-cContact2CurrentState | read-only | mandatory | The current state of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.5.3 | Scalarrms-cContact3CurrentState | read-only | mandatory | The current state of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.5.4 | Scalarrms-cContact4CurrentState | read-only | mandatory | The current state of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.5.5 | Scalarrms-cContact5CurrentState | read-only | mandatory | The current state of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.5.6 | Scalarrms-cContact6CurrentState | read-only | mandatory | The current state of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.5.7 | Scalarrms-cContact7CurrentState | read-only | mandatory | The current state of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.5.8 | Scalarrms-cContact8CurrentState | read-only | mandatory | The current state of the contact |
| 1.3.6.1.4.1.3711.15.1.1.2.6 | Noderms-cContactOFFtoONtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.2.6.1 | Scalarrms-cContact1OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.6.2 | Scalarrms-cContact2OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.6.3 | Scalarrms-cContact3OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.6.4 | Scalarrms-cContact4OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.6.5 | Scalarrms-cContact5OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.6.6 | Scalarrms-cContact6OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.6.7 | Scalarrms-cContact7OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.6.8 | Scalarrms-cContact8OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.7 | Noderms-cContactOFFtoONrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.2.7.1 | Scalarrms-cContact1OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.7.2 | Scalarrms-cContact2OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.7.3 | Scalarrms-cContact3OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.7.4 | Scalarrms-cContact4OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.7.5 | Scalarrms-cContact5OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.7.6 | Scalarrms-cContact6OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.7.7 | Scalarrms-cContact7OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.7.8 | Scalarrms-cContact8OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.8 | Noderms-cContactONtoOFFtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.2.8.1 | Scalarrms-cContact1ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.8.2 | Scalarrms-cContact2ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.8.3 | Scalarrms-cContact3ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.8.4 | Scalarrms-cContact4ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.8.5 | Scalarrms-cContact5ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.8.6 | Scalarrms-cContact6ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.8.7 | Scalarrms-cContact7ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.8.8 | Scalarrms-cContact8ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.2.9 | Noderms-cContactONtoOFFrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.2.9.1 | Scalarrms-cContact1ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.9.2 | Scalarrms-cContact2ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.9.3 | Scalarrms-cContact3ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.9.4 | Scalarrms-cContact4ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.9.5 | Scalarrms-cContact5ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.9.6 | Scalarrms-cContact6ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.9.7 | Scalarrms-cContact7ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.2.9.8 | Scalarrms-cContact8ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.3 | Noderms-cOutput | |||
| 1.3.6.1.4.1.3711.15.1.1.3.1 | Noderms-cOutputEnables | |||
| 1.3.6.1.4.1.3711.15.1.1.3.1.1 | Scalarrms-cOutput1Enable | read-write | mandatory | Set to one enables the output |
| 1.3.6.1.4.1.3711.15.1.1.3.1.2 | Scalarrms-cOutput2Enable | read-write | mandatory | Set to one enables the output |
| 1.3.6.1.4.1.3711.15.1.1.3.1.3 | Scalarrms-cOutput3Enable | read-write | mandatory | Set to one enables the output |
| 1.3.6.1.4.1.3711.15.1.1.3.2 | Noderms-cOutputNames | |||
| 1.3.6.1.4.1.3711.15.1.1.3.2.1 | Scalarrms-cOutput1Name | read-write | mandatory | The name of the output |
| 1.3.6.1.4.1.3711.15.1.1.3.2.2 | Scalarrms-cOutput2Name | read-write | mandatory | The name of the output |
| 1.3.6.1.4.1.3711.15.1.1.3.2.3 | Scalarrms-cOutput3Name | read-write | mandatory | The name of the output |
| 1.3.6.1.4.1.3711.15.1.1.3.2.4 | Scalarrms-cOutput4Name | read-write | mandatory | The name of the output |
| 1.3.6.1.4.1.3711.15.1.1.3.3 | Noderms-cOutputStates | |||
| 1.3.6.1.4.1.3711.15.1.1.3.3.1 | Scalarrms-cOutput1State | read-write | mandatory | Default State for the output |
| 1.3.6.1.4.1.3711.15.1.1.3.3.2 | Scalarrms-cOutput2State | read-write | mandatory | Default State for the output |
| 1.3.6.1.4.1.3711.15.1.1.3.3.3 | Scalarrms-cOutput3State | read-write | mandatory | Default State for the output |
| 1.3.6.1.4.1.3711.15.1.1.3.4 | Noderms-cOutputBooleanStates | |||
| 1.3.6.1.4.1.3711.15.1.1.3.4.1 | Scalarrms-cOutput1BooleanState | read-only | mandatory | Set as a result of the AND/OR comparison |
| 1.3.6.1.4.1.3711.15.1.1.3.4.2 | Scalarrms-cOutput2BooleanState | read-only | mandatory | Set as a result of the AND/OR comparison |
| 1.3.6.1.4.1.3711.15.1.1.3.4.3 | Scalarrms-cOutput3BooleanState | read-only | mandatory | Set as a result of the AND/OR comparison |
| 1.3.6.1.4.1.3711.15.1.1.3.4.4 | Scalarrms-cOutput4BooleanState | read-only | mandatory | Set as a result of the AND/OR comparison |
| 1.3.6.1.4.1.3711.15.1.1.3.5 | Noderms-cOutputOnDelay | |||
| 1.3.6.1.4.1.3711.15.1.1.3.5.1 | Scalarrms-cOutput1OnDelay | read-write | mandatory | Delay in seconds for the activation of the output in response to a change into the on state |
| 1.3.6.1.4.1.3711.15.1.1.3.5.2 | Scalarrms-cOutput2OnDelay | read-write | mandatory | Delay in seconds for the activation of the output in response to a change into the on state |
| 1.3.6.1.4.1.3711.15.1.1.3.5.3 | Scalarrms-cOutput3OnDelay | read-write | mandatory | Delay in seconds for the activation of the output in response to a change into the on state |
| 1.3.6.1.4.1.3711.15.1.1.3.5.4 | Scalarrms-cOutput4OnDelay | read-write | mandatory | Delay in seconds for the activation of the output in response to a change into the on state |
| 1.3.6.1.4.1.3711.15.1.1.3.6 | Noderms-cOutputOffDelay | |||
| 1.3.6.1.4.1.3711.15.1.1.3.6.1 | Scalarrms-cOutput1OffDelay | read-write | mandatory | Delay in seconds for the activation of the output in response to a change into the OFF state |
| 1.3.6.1.4.1.3711.15.1.1.3.6.2 | Scalarrms-cOutput2OffDelay | read-write | mandatory | Delay in seconds for the activation of the output in response to a change into the OFF state |
| 1.3.6.1.4.1.3711.15.1.1.3.6.3 | Scalarrms-cOutput3OffDelay | read-write | mandatory | Delay in seconds for the activation of the output in response to a change into the OFF state |
| 1.3.6.1.4.1.3711.15.1.1.3.6.4 | Scalarrms-cOutput4OffDelay | read-write | mandatory | Delay in seconds for the activation of the output in response to a change into the OFF state |
| 1.3.6.1.4.1.3711.15.1.1.3.7 | Noderms-cOutputStrings | |||
| 1.3.6.1.4.1.3711.15.1.1.3.7.1 | Scalarrms-cOutput1BooleanInput | read-write | mandatory | Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 … |
| 1.3.6.1.4.1.3711.15.1.1.3.7.2 | Scalarrms-cOutput2BooleanInput | read-write | mandatory | Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 … |
| 1.3.6.1.4.1.3711.15.1.1.3.7.3 | Scalarrms-cOutput3BooleanInput | read-write | mandatory | Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 … |
| 1.3.6.1.4.1.3711.15.1.1.3.7.4 | Scalarrms-cOutput4BooleanInput | read-write | mandatory | Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 … |
| 1.3.6.1.4.1.3711.15.1.1.3.8 | Noderms-cOutputBooleanSelector | |||
| 1.3.6.1.4.1.3711.15.1.1.3.8.1 | Scalarrms-cOutput1BooleanSelector | read-write | mandatory | Set 0 to select OR, and 1 to select AND |
| 1.3.6.1.4.1.3711.15.1.1.3.8.2 | Scalarrms-cOutput2BooleanSelector | read-write | mandatory | Set 0 to select OR, and 1 to select AND |
| 1.3.6.1.4.1.3711.15.1.1.3.8.3 | Scalarrms-cOutput3BooleanSelector | read-write | mandatory | Set 0 to select OR, and 1 to select AND |
| 1.3.6.1.4.1.3711.15.1.1.3.8.4 | Scalarrms-cOutput4BooleanSelector | read-write | mandatory | Set 0 to select OR, and 1 to select AND |
| 1.3.6.1.4.1.3711.15.1.1.3.9 | Noderms-cOutputOFFtoONtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.3.9.1 | Scalarrms-cOutput1OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.3.9.2 | Scalarrms-cOutput2OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.3.9.3 | Scalarrms-cOutput3OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.3.9.4 | Scalarrms-cOutput4OFFtoONtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.3.10 | Noderms-cOutputOFFtoONrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.3.10.1 | Scalarrms-cOutput1OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.3.10.2 | Scalarrms-cOutput2OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.3.10.3 | Scalarrms-cOutput3OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.3.10.4 | Scalarrms-cOutput4OFFtoONrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.3.11 | Noderms-cOutputONtoOFFtraps | |||
| 1.3.6.1.4.1.3711.15.1.1.3.11.1 | Scalarrms-cOutput1ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.3.11.2 | Scalarrms-cOutput2ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.3.11.3 | Scalarrms-cOutput3ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.3.11.4 | Scalarrms-cOutput4ONtoOFFtrap | read-write | mandatory | Set to 0 for trap disabled, 1 for enabled |
| 1.3.6.1.4.1.3711.15.1.1.3.12 | Noderms-cOutputONtoOFFrepeatTimers | |||
| 1.3.6.1.4.1.3711.15.1.1.3.12.1 | Scalarrms-cOutput1ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.3.12.2 | Scalarrms-cOutput2ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.3.12.3 | Scalarrms-cOutput3ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |
| 1.3.6.1.4.1.3711.15.1.1.3.12.4 | Scalarrms-cOutput4ONtoOFFrep | read-write | mandatory | Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds |