RS-XX8000-COMMON-MIB
134 objects
This MIB defines general objects of XX8000 transmitting systems from Rohde & Schwarz. Use this MIB for things all transmitters support via SNMP, e.g.: - product information - installation / configuration issues (trapsinks, managers aso.) The following MIBs are related to this: - RS-COMMON-MIB - mandatory for this MIB.
Imported Objects
| RS-COMMON-MIB | rsProdBroadcastTransmitter rsRegModules |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2566.127.1.2.167 | IdentityrsXx8000 | current | The subtree for all transmitters of series 8000. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1 | IdentityrsXx8000Common | current | This is the subtree for values which every equipement of series 8000 suports. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1 | NodersXx8000CommonObjs | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.1 | NodeproductInformation | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.1.2 | ScalarserialNumber | read-only | current | The serial number of the device. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.1.3 | ScalaridentNumberSW | read-only | current | The Rohde&Schwarz identification number of the software, for example 2094.2090.02. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.1.4 | ScalarversionNumberSW | read-only | current | The Rohde&Schwarz revision number of the software, for example 1.2.1. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.1.5 | ScalaridentNumberHW | read-only | current | The Rohde&Schwarz identification number of the hardware, for example 2095.8007.02 (NetCCU). |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.1.6 | ScalarversionNumberHW | read-only | current | The Rohde&Schwarz revision number (product index) of the hardware, for example 03.03. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2 | NodesnmpConfig | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2 | TabletrapSinkTable | not-accessible | current | This table is for configuration of trapsinks - the IP-addresses where traps/informs are sent to. This table gives you possibility for easier remote configurati… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1 | RowtrapSinkEntry | not-accessible | current | An entry for a trapsink. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.1 | ColumntrapSinkNumber | not-accessible | current | The arbitrary number in the list. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.2 | ColumntrapSinkVersion | read-write | current | The SNMP-version of sent out alarm. 1: v1Trap 2: v2Trap 3: v2Inform |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.3 | ColumntrapSinkAddress | read-write | current | The IP-Address of the SNMP manager to which the alarms are sent to. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.4 | ColumntrapSinkPort | read-write | current | The port of the SNMP manager to which the alarms are sent to. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.5 | ColumntrapSinkCommunity | read-write | current | community used in alarm |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.6 | ColumntrapSinkInformRetry | read-write | current | only used for informs: number of times to resend the inform |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.7 | ColumntrapSinkInformTimeout | read-write | current | only used for informs: timeout between retries |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.8 | ColumntrapSinkInformUnacknowledged | read-write | obsolete | only used for informs: maximum number of waiting informs if this is reached, the oldest pending inform is discarded |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.9 | ColumntrapSinkUse | read-write | current | on/off-switch for this sink |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.3 | ScalarsendTestTrap | read-write | current | 1: idle 2: Agent generates the trap 'testTrap', which is useful when checking the connection between agent (NetCCU) and your trapsink. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.4 | ScalarirtTrapsAllOn | read-write | current | This switches all IRT-traps on - traps for all events are sent out. In detail, this means in the IRT-MIBs under branches *EventEnable all OIDs are set to 1. Ca… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.5 | ScalarirtTrapsAllOff | read-write | current | This switches all IRT-traps off - no traps are sent out. In detail, this means in the IRT-MIBs under branches *EventEnable all OIDs are set to 2. Note: This is… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.6 | ScalarrsTrapsAllOn | read-write | current | This switches all R&S-traps on - traps for all events (info, warning, fault) are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table i… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.7 | ScalarrsTrapsAllOff | read-write | current | This switches all R&S-traps off - no traps are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table in column event*Mask all OIDs are s… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.8 | ScalarrsTrapsAllFaultsOn | read-write | current | This switches all R&S-traps for faults on - traps for all 'faults' are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table in column e… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.9 | ScalarrsTrapsAllFaultsOff | read-write | current | This switches all R&S-traps for faults off - no traps for 'faults' are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table in column e… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.10 | ScalarrsTrapsAllWarningsOn | read-write | current | This switches all R&S-traps for warnings on - traps for all 'warnings' are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table in colu… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.11 | ScalarrsTrapsAllWarningsOff | read-write | current | This switches all R&S-traps for warnings off - no traps for 'warnings' are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table in colu… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3 | NodetransmitterConfig | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.1 | ScalardateTime | read-write | current | The date and time for the transmitter. Notes: Deci-seconds different from 0 are ignored. The range of distance from UTC is -12h..+14h. Omitting the optional UT… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2 | Nodentp | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.1 | ScalarntpMode | read-write | current | Configures the working mode of the NTP client. disabled: no ntp synchronisation will be done step: the time will synchronized every NTP sync-time unknown: NTP … |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.2 | ScalarntpSyncTimeInterval | read-write | current | Set the intervall, how often the NTP client will be synchronized to the NTP server. Note: this is useful in step mode only . |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.3 | TablentpServerAddrTable | not-accessible | current | Table with server adresses. Currently maximal one entry is allowed. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.3.1 | RowntpServerAddrEntry | not-accessible | current | An entry for a ntpServerAddrTable. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.3.1.1 | ColumnntpServerAddrIdx | not-accessible | current | index for table entry. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.3.1.2 | ColumnntpServerAddress | read-write | current | host name or IP address of server. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.4 | ScalarntpState | read-only | current | Shows the actual state of the NTP synchronisation. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.5 | ScalarntpLastSync | read-only | current | The date/time of the last successful synchronisation. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5 | NodeswMaintenance | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.1 | Scalarrestart | read-write | current | Restart the software of transmitter's control unit. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.5 | NodeswUpdate | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.5.2 | ScalarswUpdateStart | read-write | current | Start software update tool at transmitter side in manual mode. The PC tool can only connect to transmitter's control unit if the software update tool on the tr… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.5.3 | ScalarswUpdateMode | read-write | current | Run mode of the software update tool at the transmitter side. manual: Software update can be started with the Start button. It will stop automaticly after an i… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.5.4 | ScalarswUpdateDeviceName | read-write | current | The Device Name is dedicated to this control unit. It will be shown in the software update tool on the PC to differ devices. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.5.5 | ScalarswUpdateDeviceGroup | read-write | current | The Device Group can be used to separate devices in large networks. It must match the Device Group in software update tool on the PC. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2 | NodersXx8000CommonEvents | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0 | NodersXx8000EventsV2 | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.1 | NotificationtestTrap | current | This trap is sent to check whether the trapsink is receiving any traps from this agent. To trigger this trap, set 'sendTestTrap' to '2'. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10 | NodeeventTx | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.0 | IdentityeventsTxV2 | current | Compatibility to SMIv1. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.0.1 | NotificationswUpdateStarted | current | Software update started. The PC tool can only connect to transmitter's control unit if the software update tool on the transmitter is started. It uses the netw… | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.0.2 | NotificationntpSyncFailed | current | NTP synchronisation failed. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1 | TableeventsTxTable | not-accessible | current | This table contains necessary information for handling alarms. For each alarm you have the following information: - name (get), - mask to enable/disable sendin… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1 | RoweventsTxEntry | not-accessible | current | An event entry always consists of 3 values: - name: an enumerated list of all possible notifications - mask: the corresponding mask (enable/disable) - priority… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1.1 | ColumneventTxNameIdx | not-accessible | current | The event number as integer. This is a helper column and therefore not-accessible. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1.2 | ColumneventTxName | read-only | current | The event number as integer and the value as readable text. The enumeration correlates with the notifications under eventsTxV2. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1.3 | ColumneventTxMask | read-write | current | See TextualConvention for details. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1.4 | ColumneventTxPriority | read-write | current | See TextualConvention for details. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1.5 | ColumneventTxEvent | read-only | current | See TextualConvention for details. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.1 | IdentityeventHistory | current | Information about sent out events. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.1 | ScalarcounterEvents | read-only | current | The total number of traps sent out. This is an increasing value. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2 | TableeventHistoryTable | not-accessible | current | The table of the last 100 messages sent out. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1 | RoweventHistoryEntry | not-accessible | current | An event entry. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.1 | ColumneventHistoryNumber | not-accessible | current | The trap number. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.2 | ColumneventHistoryModule | read-only | current | This column indicates the physical module the corresponding message is for. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.3 | ColumneventHistoryEvent | read-only | current | This column indicates the event. In correlation with column eventHistoryModule, you can see the name of the event here. For this, you need to have a look at th… |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.4 | ColumneventHistoryEventState | read-only | current | See TextualConvention for details. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.5 | ColumneventHistoryEventDate | read-only | current | This column indicates the date and time of the event. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.101 | ColumneventHistoryTx | read-only | current | The transmitter index in case of NTx or Np1 systems. For variants with one transmitter only (SingleTx) this index is always transmitterB(1). |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.3 | NodeeventMapObjects | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.1 | ScalareventAlarmPriority | accessible-for-notify | current | This OID holds the value for the priority when sending out a notification. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.2 | ScalareventAlarmClass | accessible-for-notify | current | See TextualConvention for details. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.3 | ScalareventEvent | accessible-for-notify | current | This OID holds the value for the event itself when sending out a notification. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.4 | ScalarindexTransmitter | accessible-for-notify | current | This OID holds the value for the transmitter when sending out a notification. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.5 | ScalarindexAB | accessible-for-notify | current | This OID holds the value for the module A (exciterA, outputstageA) or B (exciterB, outputstageB) when sending out a notification. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.6 | ScalarindexRack | accessible-for-notify | current | This OID holds the value for the rack when sending out a notification. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.7 | ScalarindexAmplifier | accessible-for-notify | current | This OID holds the value for the amplifier when sending out a notification. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.8 | ScalarindexProgram | accessible-for-notify | current | This object holds the value for the program when sending out a notification. |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3 | NodersXx8000CommonConf | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1 | NodersXx8000CommonGroups | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.1 | GroupgroupNotifyTest | current | test notifications. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.2 | GroupgroupNotify | current | notifications for all transmitters. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.6 | GroupgroupEventTest | current | The objects sent with testTrap. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.8 | GroupgroupEventHistory | current | Contains all objects from 'eventHistory'. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.9 | GroupgroupEventObjects | current | Contains all objects from 'eventMapObjects'. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.11 | GroupgroupProductInformation | current | Contains all objects from 'productInformation' (R&S typeplate). | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.12 | GroupgroupSnmpConfig | current | Contains all objects from 'snmpConfig'. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.13 | GroupgroupTransmitterConfig | current | objects from 'transmitterConfig'. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.14 | GroupgroupNTP | current | objects from 'ntp' | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.15 | GroupgroupSwMaintenance | current | objects from 'swMaintenance' | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.16 | GroupgroupNotifyNTP | current | Notifications from the NTP client. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.17 | GroupgroupObsoletedObjects | obsolete | Description. | |
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.2 | NodersXx8000CommonCompls | |||
| 1.3.6.1.4.1.2566.127.1.2.167.1.3.2.1 | Compliancexx8000BasicCompliance | current | The compliance statement for XX8000 entities which implement this MIB module. | |
| 1.3.6.1.4.1.2566.149.1.163 | IdentityrsXx8000MibModule | This MIB defines general objects of XX8000 transmitting systems from Rohde & Schwarz. Use this MIB for things all transmitters support via SNMP, e.g.: - produc… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtvStandard | INTEGER { bg(1), m(2), m1(3), n(4), dk(5), i(6), i1(7), dkfm2(8), l(9), k1(10), h(11), b(12), g(13) } | current | The ATV standards. |
| EqualizerCalibrationState | INTEGER { inactive(1), active(2), warning(3), fail(4) } | current | possible precorrection equalizer calibration states |
| EventClass | INTEGER { fault(1), warning(2), info(3) } | current | These are the levels of events a transmitter has. Info(3): Are events which only inform about changes, e.g. 'local/remote' or 'reboot of the control unit'. They don't affect the transmission. Warning(2): Are minor probl… |
| EventMask | INTEGER { enable(1), disable(2) } | current | |
| EventMaxEntryNumber | Integer32 (1..999) | current | The maximum number of events. This is used in other MIBs as a placeholder. |
| EventPriority | Integer32 (0..255) | current | The priority of the event. Users can freely set this value in range 0..255. |
| EventState | INTEGER { active(1), inactive(2) } | current | The current state of an event: active(1) inactive(2) This is used in all logbooks and in all event handling tables. |
| FailDelayMode | INTEGER { always(1), ifQualified(2) } | current | The mode how fail delay is handled. always(1) - the fail delay action is always carried out after the user specified fail delay time. ifQualified(2) - the fail delay action is carried out after the user specified fail d… |
| FailDelayStatus | INTEGER { off(1), warning(2), ok(3) } rsXx8000 OBJECT-IDENTITY STATUS current DESCRIPTION "The subtree for all transmitters of series 8000." ::= { rsProdBroadcastTransmitter 167 } rsXx8000Common OBJECT-IDENTITY STATUS current DESCRIPTION "This is the subtree for values which every equipement of series 8000 suports." ::= { rsXx8000 1 } | current | The current state of time drift prediction. off(1) - not used warning(2) - Availability of GPS not sufficient for time drift prediction ok(3) - Time drift prediction is functional. |
| FloatingPoint | OCTET STRING (SIZE (1..63)) | current | FloatingPoint provides a way of representing non-integer numbers in SNMP. Numbers are represented as a string of ASCII characters in the natural way. So for example, '3', '3.142' and '0.3142E1' are all valid numbers. Th… |
| IndexAB | INTEGER { a(1), b(2) } | current | The value for the module A (exciterA, outputstageA) or B (exciterB, outputstageB) for alarms. This is a helper column. |
| IndexAmplifier | Integer32 (1..10) | current | This is used to display a designated amplifier. |
| IndexProgram | INTEGER { programRes(1), program1(2), program2(3), program3(4), program4(5), program5(6), program6(7), program7(8), program8(9) } | current | This is used for Nplus1 systems to indicate a program sent out (logical view). ProgramRes(1) is the reserve program, program1(2) to program8(9) are the main programs. In difference to the physical view, programRes(1) ha… |
| IndexRack | Integer32 (1..10) | current | This is used for systems with more than 1 rack to display a designated rack. |
| IndexTransmitter | INTEGER { transmitterB(1), transmitterA1(2), transmitterA2(3), transmitterA3(4), transmitterA4(5), transmitterA5(6), transmitterA6(7), transmitterA7(8), transmitterA8(9) } | current | This is used for Nplus1 systems to indicate a transmitter (physical view). TransmitterB(1) is the reserve transmitter, transmitterA1(2) to transmitterA8(9) are the main transmitter. In difference to the logical view, tr… |
| InputSource | INTEGER { bnc(1), rx(2), sat(3), ip(4), reserved(5), tp(6), vf(7), t2Mi(8), iq(9) } | current | input source selection type |
| LockState | INTEGER { locked(1), unlocked(2) } | current | This is for carrier locking. |
| LogbookEntryMessagesExcATV | INTEGER { reboot(0), summaryFault(1), summaryWarning(2), local(3), exciterOn(4), rfOk(5), noInput(6), reference(7), rfOn(8), mute(9), relieveReq(10), oneFan(12), noCcuComm(13), swUpdated(14), biosUpdated(15), powerSupply(16), temperature(17), fans(18), hwMainboard(19), hwCfCard(20), outputOpen(21), hwEEPROM(23), rfFail(25), loopOpen(26), noFPGA(27), carrierLock(28), inputFail(30), optionExpired(37), optionWillEnd(38), fpgaConfig(40), hwIifBoard(41), hwRfBoard(42), hwSynth1(43), hwSynth2(44), hwSynth3(45), muteAudio1(46), muteAudio2(47), videoInput1(48), videoInput2(49), videoInputAct(50), rfOutExcV(51), rfOutAntV(52), rfOutExcA1(53), rfOutAntA1(54), rfOutExcA2(55), rfOutAntA2(56), clippingAntennaInput(57), noHeadroomAntenna(58), audioMode(59), whiteLine(60), whiteLineLnAmp(61), whiteLineLnAmpW(62), syncCheck(63), whiteLimiter(64), devLimAud1(65), devLimAud2(66), videoInputClipping(67), aud1InpClip(68), aud2InpClip(69), nicam728Data(70), nicam728Carr(71), aud2OutClip(72), rfMonFail(73), rfVideoFail(74), rfAudio1Fail(75), rfAudio2Fail(76), audioLoopOpen(77), videoLoopOpen(78), testMode(100), extRefFail(101), extRefWeak(102), extPpsFail(103), wrongConfig(104), wrongDatarate(106), fifoOverUnderFlow(107), delayChanged(108), wrongDelay(109), noMIP(110), wrongMfArrivalTime(111), packetUnlock(113), maxDelayChanged(114), referenceAbsent(115), noPPS(116), rfFailAmplifier(117), warningAmplifier(118), amplifierOverflow(119), synthesizerUnlocked(127) } | obsolete | Inserted information in the logbook of ATV exciters. This is obsolete! Please use LogbookEntryMessagesExcTv! |
| LogbookEntryMessagesExcDVB | INTEGER { excReboot(0), excSummaryFault(1), excSummaryWarning(2), excLocal(3), excOn(4), excRfOk(5), excNoInput(6), excReferenceFail(7), excRfOn(8), excMute(9), excFanWarning(12), excNoCommunicationToNetCCU(13), excPowerSupply(16), excBoardTemperature(17), excFanFault(18), excSelfTest(19), excHwCfCard(20), excOutputOpen(21), excHwEeprom(23), excRfFail(25), excLoop(26), excCarrierLock(28), excInputFault(30), excOptionExpired(37), excOptionExpires(38), excHwFpgaConfig(40), excHwIifBoard(41), excHwRfBoard(42), excHwSynth1(43), excHwSynth2(44), excHwSynth3(45), excTestMode(100), excExtRefFail(101), excExtRefWeak(102), excExtPPSFail(103), excWrongConfig(104), excInputFail(105), excWrongDatarate(106), excFifoWarning(107), excExtDelayChanged(108), excWrongDelay(109), excNoMIP(110), excWrongMFArrivalTime(111), excExtPPSAsynchron(112), excPacketUnlock(113), excMaxDelayChanged(114), excNoReference(115), excNoPPS(116), excRfFailAmplifier(117), excWarningAmplifier(118), excOverflowAmplifier(119), excSynthUnlock(127) } | obsolete | Inserted information in the logbook of DVB exciters. This is obsolete! Please use LogbookEntryMessagesExcTv! |
| LogbookEntryMessagesExcFM | INTEGER { excReboot(0), excSummaryFault(1), excSummaryWarning(2), excLocal(3), excOn(4), excRfOk(5), excNoInput(6), excReferenceFail(7), excRfOn(8), excMute(9), excNoCommunicationToNetCCU(13), excBiosUpdated(15), excPowerSupply(16), excOutputOpen(21), excEEPROMError(23), excRfFail(25), excLoop(26), excFPGANotLoaded(27), excCarrierLock(28), excInputFault(30), ostSummaryFault(32), excSoftFault(33), ostSoftFault(34), ostSummaryWarning(36), excOptionKeyExpired(37), excOptionKeyWarning(38), excTemperatureWarning(41), excTemperatureFault(42), excRfUnitFault(43), excFan1NotOk(47), excFan2NotOk(48), excMainPLLUnlocked(49), excMainUPCUnlocked(50), excMainCLKUnlocked(51), exc12VFanWarning(67), exc12VRackControllerWarning(71), excInfoFrequencyChanged(81), excLevelAESLeftTooLow(84), excLevelAESRightTooLow(85), excLevelMPXTooLow(86), excNoDataInput(87), excLevelAFLeftTooLow(88), excLevelAFRightTooLow(89), excLevelAUX1TooLow(90), excLevelAUX2TooLow(91), excLevelAUX3TooLow(92), excLevelAESLeftTooHigh(93), excLevelAESRightTooHigh(94), excLevelMPXTooHigh(95), excLevelAFLeftTooHigh(97), excLevelAFRightTooHigh(98), excLevelAUX1TooHigh(99), excLevelAUX2TooHigh(100), excLevelAUX3TooHigh(101), excAESNoClock(102), excAESParityBiphaseError(103), excAESStateNotValid(104), excInpCh1NotOk(105), excInpCh2NotOk(106), excInpCh1Active(107), excInpCh2Active(108), excInpAutomaticActive(109), recSummaryWarning(110), recSummaryFault(111), ostRfPresent(112), recRfWarning(113), recCarrierNotPresent(114), recNoConnection(115), ostRfWarn(116), ostRfFault(117), ostNoInput(118), recRfFault(119), recRfPresent(120), ostPowerRegulationActive(121), ostTemperatureWarning(122), ostSwrWarning(123), ostSwrFault(124), ostNoConnection(125) } | current | Inserted information in the logbook of FM exciters. |
| LogbookEntryMessagesExcTv | INTEGER { excReboot(0), excSumFault(1), excSumWarning(2), excLocal(3), excExciterOn(4), excRfOk(5), excNoInput(6), excReference(7), excRfOn(8), excMute(9), excRelieveReq(10), excSwDiag(11), excOneFan(12), excNoCCUComm(13), excSwUpdated(14), excBiosUpdated(15), excPowerSupply(16), excTemperature(17), excFans(18), excHwMainboard(19), excHwCfCard(20), excOutputOpen(21), excRebootRqst(22), excHwEEPROM(23), excWatchdog(24), excRfFail(25), excLoopOpen(26), excNoFPGA(27), excCarrierLock(28), excInputFail(30), excOptionExpired(37), excOptionWillEnd(38), excFPGAConfig(40), excHwIIFBoard(41), excHwRfBoard(42), excHwSynth1(43), excHwSynth2(44), excHwSynth3(45), excMuteAudio1(46), excMuteAudio2(47), excVideoInp1(48), excVideoInp2(49), excVideoInpAct(50), excRfOutExcV(51), excRfOutAntV(52), excRfOutExcA1(53), excRfOutAntA1(54), excRfOutExcA2(55), excRfOutAntA2(56), excClippingAntInp(57), excNoHeadroomAnt(58), excAudioMode(59), excWhiteLine(60), excWhiteLineLnAmp(61), excWhiteLineLnAmpW(62), excSyncCheck(63), excWhiteLimiter(64), excDevLimAud1(65), excDevLimAud2(66), excVideoInpClip(67), excAud1InpClip(68), excAud2InpClip(69), excNICAM728Data(70), excNICAM728Carr(71), excAud2OutClip(72), excRfMonFail(73), excRfVideoFail(74), excRfAudio1Fail(75), excRfAudio2Fail(76), excAudioLoopOpen(77), excVideoLoopOpen(78), excTestMode(100), excExtRefFail(101), excExtRefWeak(102), excExtPPSFail(103), excInputSwitched(104), excInputFail2(105), excWrongDatarate(106), excFifoOverUnderflow(107), excDelayChanged(108), excSFNDelay(109), excNoMIP(110), excWrongMFArrivalTime(111), excExtPPSAsynchron(112), excPacketUnlock(113), excMaxDelayChanged(114), excReferenceAbsent(115), excNoPPS(116), excRfFailAmplifier(117), excWarningAmplifier(118), excAmpOverflow(119), excModError(120), excFLOModErr(121), excInput1(122), excInput2(123), excInput1LP(124), excInput2LP(125), excNoReserveAvailable(126), excSynthesizerUnlocked(127), excSFNIdleRegulation(128), excAmpVSWR(170), excAmpTempWarn(171), excAmpTempFault(172), excAmpRegulation(173), excAmpTransistor(174), excAmpReducedPower(175), excHWAmpEEPROM(176), excRFWarningAmp(177), excModSfnRAMInitErr(180), excModTransportErr(181), excModFIFOParErr(182), excModFIFOSeqErr(183), excModSfnBufEmpty(184), excModSfnBufFull(185), excModSsfMultiple(186), excModSsfMissing(187), excModLofTS1(188), excModLofTS2(189), excModCoreStall(190), excModIqInactive(191), excModMtiVersErr(192), excModCoreReset(193), excModConfigChanged(194), excSFNBuffer(195), excModIdleMode(196), excSFNBufferTooEmpty(197), excModMemError(198), excSfnBufferTooFull(199), excMissingSIP(205), excTCLevelOutOfRange(210), excTCLevelOverflow(211), excInputFail3(212), excInputWarning(213), excEchoWarning(214), xlxInputStepProtection(215), excExt1PPSReference(220), excInt1PPSReference(221), exc5MHzReference(222), exc10MHzReference(223), excPrecorrectionSetupInfo(230), excPrecorrectionSetupFail(231), excFramecounter(240), excMissingIIP(241), excPSUOvertemp(250), excPowerSupplyWarning(251), excNSUConnected(256), excMonHWError(260), excRecvRxAUXHWError(261), excRecvHWError(262), excMonNoFrontendLock(263), excRecvAUXNoFrontendLock(264), excRecvNoFrontendLock(265), excMonBadInputSignal(266), excRecvAUXBadInputSignal(267), excRecvBadInputSignal(268), excMonNoInputSignal(269), excRecvAUXWarningInputSignal(270), excRecvWarningInputSignal(271), excMonAUXHWError(272), excMonAUXNoFrontendLock(273), excMonAUXBadInputSignal(274), excMonitorNoInputFail(280), excNoSfnData(300), excNoMobileDtvContent(301), excInput1Available(320), excInput2Available(321), excInput1LPAvailable(322), excInput2LPAvailable(323), excRfTest(400), excPRBSInsertion(401), excTestEnsemble(402), excInvalidTII(403), excTIITransmission(404), excTxModeChange(405), excTIIChange(406), excNullTIST(407), excTISTJitter(408), excTS1FrameLock(409), excTS2FrameLock(410), excCrcViolationRateTooHigh(411), excSeamlessReady(412), excTestFIC(413), dvbt2NoL1Present(500), dvbt2InvalidConfiguration(501), dvbT2UnsupportedConfiguration(502), dvbt2BandwidthMismatch(503), iqHeader1Integrity(550), iqHeader2Integrity(551), iqHeader1Issues(552), iqHeader2Issues(553), iqInputRegulation(554), iqWrongConfiguration(555), iqTseMute(556), iqInputOrder(557), sx801PowerFail7Vpositive(600), sx801PowerFail7Vnegative(601), sx801PowerFail12V(602), preAmpTemperatureFault(603), preAmpRFFault(604), parIoExcLink(605), parIoTxLink(606), parIoGpIoLink(607), rfBoardRFFault(608), sx801PhaseError(640), sx801ReflectionWarning(641), sx801ReflectionFault(642), sx801RfWarning(643), sx801AmplShutdown(644), sx801PA1Supply1TooHot(650), sx801PA1Supply2TooHot(651), sx801PA1ReserveSupplyTooHot(652), sx801PA1Supply1Fail(653), sx801PA1Supply2Fail(654), sx801PA1ReserveSupplyFail(655), sx801PA1AcFail(656), sx801PA1BlowerFail(657), sx801PA1TransistorFail(658), sx801PA1DriverFail(659), sx801PA1RfInFail(660), sx801PA1Reflection(661), sx801PA1VSWR(662), sx801PA1PowerFail(663), sx801PA1Regulation(664), sx801PA1Temperature(665), sx801PA1Communication(666), sx801PA1Update(667), sx801PA2Supply1TooHot(675), sx801PA2Supply2TooHot(676), sx801PA2ReserveSupplyTooHot(677), sx801PA2Supply1Fail(678), sx801PA2Supply2Fail(679), sx801PA2ReserveSupplyFail(680), sx801PA2AcFail(681), sx801PA2BlowerFail(682), sx801PA2TransistorFail(683), sx801PA2DriverFail(684), sx801PA2RfInFail(685), sx801PA2Reflection(686), sx801PA2VSWR(687), sx801PA2PowerFail(688), sx801PA2Regulation(689), sx801PA2Temperature(690), sx801PA2Communication(691), sx801PA2Update(692), pa3Supply1TooHot(700), pa3Supply2TooHot(701), pa3ReserveSupplyTooHot(702), pa3Supply1Fault(703), pa3Supply2Fault(704), pa3ReserveSupplyFault(705), pa3ACFault(706), pa3BlowerFault(707), pa3TransistorFault(708), pa3DriverFault(709), pa3RFinFault(710), pa3Reflection(711), pa3VSWR(712), pa3PowerFault(713), pa3Regulation(714), pa3Temperature(715), pa3Communication(716), pa3Update(717), pa4Supply1TooHot(725), pa4Supply2TooHot(726), pa4ReserveSupplyTooHot(727), pa4Supply1Fault(728), pa4Supply2Fault(729), pa4ReserveSupplyFault(730), pa4ACFault(731), pa4BlowerFault(732), pa4TransistorFault(733), pa4DriverFault(734), pa4RFinFault(735), pa4Reflection(736), pa4VSWR(737), pa4PowerFault(738), pa4Regulation(739), pa4Temperature(740), pa4Communication(741), pa4Update(742), tse800NoConnect(770), tse800Warning(771), tse800Fault(772), automaticOn(800), automaticFault(801), autoCtrlExcActive(802), autoPrgmExcActive(803), changeoverByUser(804), changeoverByAuto(805), automaticReady(806), autoPrgmExcNoConnect(807), autoPrgmExcFault(808) } | current | Inserted information in the logbook of TV exciters. |
| LogbookEntryMessagesNetCCU | INTEGER { local(3), rfOn(4), excAutoReady(6), excAutoChanged(7), ostAutoReady(8), ostAutoChanged(9), rfOnSound1(10), rfOnSound2(11), activeExcA(12), activeExcB(13), activeOstA(14), activeOstB(15), rfOnVision(16), rfOnActiveExc(17), rfOnDLoad(18), rfOkDLoad(19), swBackupStarted(20), swBackupDone(21), swBackupFailed(22), swRestoreStarted(23), swRestoreDone(24), swRestoreFailed(25), optionKeyExpired(30), txModeSwitchOverStarted(37), txModeSwitchOverEnded(38), reboot(40), rfLoopProgram(41), rfLoopReserve(42), rfWarning(43), reflectionWarning(44), intPwrSupply(45), extPwrSupply(46), rfVisionWarning(47), rfSound1Warning(48), rfSound2Warning(49), fanFault(51), sumWarningRec(52), sumWarningExcA(53), sumWarningExcB(54), sumWarningOstA(55), sumWarningOstB(56), rfDLoadWarning(57), rfDLoadReflection(58), receiverConnect(59), receiverSumFault(60), txModeInconsistent(61), boardTemperatureWarning(62), optionKeyWillExpire(70), powerSupply(81), rfFail(82), reflectionFault(83), boardTemperature(84), excSwitch(85), ostSwitch(86), connectionExcA(87), connectionExcB(88), connectionOstA(89), connectionOstB(90), rfVision(91), rfSound1Fault(92), rfSound2Fault(93), connectionRec(95), summaryFaultRec(96), summaryFaultExcA(97), summaryFaultExcB(98), summaryFaultOstA(99), summaryFaultOstB(100), rfDLoadFault(101), rfDLoadReflectionFault(102), apaConnect(103), absorber(104), monitorFaultExcA(107), monitorFaultExcB(108), txModeSwitchOverFailed(109) } | current | Inserted information in the logbook of NetCCU. |
| LogbookEntryMessagesNSU | INTEGER { local(3), automaticOn(5), automaticReady(6), automaticChangeover(7), swBackupStarted(10), program1RfOn(11), program2RfOn(12), program3RfOn(13), program4RfOn(14), program5RfOn(15), program6RfOn(16), program7RfOn(17), program8RfOn(18), programReserveRfOn(19), swBackupDone(20), txA1ToDummyLoad(21), txA2ToDummyLoad(22), txA3ToDummyLoad(23), txA4ToDummyLoad(24), txA5ToDummyLoad(25), txA6ToDummyLoad(26), txA7ToDummyLoad(27), txA8ToDummyLoad(28), txBToDummyLoad(29), optionkeyExpired(30), txA1Local(31), txA2Local(32), txA3Local(33), txA4Local(34), txA5Local(35), txA6Local(36), txA7Local(37), txA8Local(38), txBLocal(39), reboot(40), txA1SumWarning(41), txA2SumWarning(42), txA3SumWarning(43), txA4SumWarning(44), txA5SumWarning(45), txA6SumWarning(46), txA7SumWarning(47), txA8SumWarning(48), txBSumWarning(49), swBackupFailed(50), txA1NoConnect(51), txA2NoConnect(52), txA3NoConnect(53), txA4NoConnect(54), txA5NoConnect(55), txA6NoConnect(56), txA7NoConnect(57), txA8NoConnect(58), txBNoConnect(59), swRestoreStarted(60), txA1SumFault(61), txA2SumFault(62), txA3SumFault(63), txA4SumFault(64), txA5SumFault(65), txA6SumFault(66), txA7SumFault(67), txA8SumFault(68), txBSumFault(69), swRestoreDone(70), swRestoreFailed(80), connBoardTxA1Updating(81), connBoardTxA2Updating(82), connBoardTxA3Updating(83), connBoardTxA4Updating(84), connBoardTxA5Updating(85), connBoardTxA6Updating(86), connBoardTxA7Updating(87), connBoardTxA8Updating(88), connBoardTxBUpdating(89), inputSwitchUpdating(90), connBoardTxA1SumWarning(91), connBoardTxA2SumWarning(92), connBoardTxA3SumWarning(93), connBoardTxA4SumWarning(94), connBoardTxA5SumWarning(95), connBoardTxA6SumWarning(96), connBoardTxA7SumWarning(97), connBoardTxA8SumWarning(98), connBoardTxBSumWarning(99), inputSwitchSumWarning(100), fanFault(101), sumWngRCV(102), rcvNoConnect(103), sumFltRCV(104), optionkeyWillExpire(105), powerSupply(106), boardTemperature(107), automaticFault(108), rcvNoConnectx(109), sumFltRCVx(110), connBoardTxA1SumFault(111), connBoardTxA2SumFault(112), connBoardTxA3SumFault(113), connBoardTxA4SumFault(114), connBoardTxA5SumFault(115), connBoardTxA6SumFault(116), connBoardTxA7SumFault(117), connBoardTxA8SumFault(118), connBoardTxBSumFault(119), inputSwitchSumFault(120), outputSwitch(122), inputSwitchChangeOver(123), txBParameterSet(124), antennaRedundancySumWarning(196), tcbTxBPowerSupply(197), txBPosition(198), intPwrSupply(200), extPwrSupply(201), antennaRedundancySumFault(226) } | current | Inserted information in the logbook of Nplus1-Switchoverunit. |
| LogbookEntryMessagesOST | INTEGER { ostRfOn(42), ostRfOk(43), ostRfReduced(44), ostNoInput(45), ostRfWarning(46), ostReflectionWarning(47), ostRackWarning(48), ostCoolingWarning(49), ostRfFail(50), ostReflectionFault(51), ostACFault(52), ostCoolingFault(53), ostCommunicationFault(54), rackLinkOk(58), rackOn(59), reducedRfExcA(60), reducedRfExcB(61), rackGpiWarning(62), rackFan1Fault(63), rackFan2Fault(64), rackCoolingSumWarning(65), rackAmplifierSumFault(66), rackGpiFault(67), rackTemperatureFault(68), rackACFault(69), rackCoolingSumFault(70), rackTempFaultAbs1(71), rackTempFaultAbs2(72), rackDCFault(73), ampNumberDiffers(76), ampOn(77), ampDCOk(78), ampACOk(79), ampRfInFail(80), ampRfFail(81), ampReflectionFault(82), ampTemperatureFault(83), ampFanFault(84), ampTransistorFault(85), pucFault(86), pucWarning(87), pucLink(88), pucFan1Link(89), pucFan2Link(90), pucFan3Link(91), pucFan4Link(92), pucPump1Link(93), pucPump2Link(94), pucOn(95), pucFan1(96), pucFan2(97), pucFan3(98), pucFan4(99), pucPump1(100), pucPump2(101), pucPressure(102), pucMaintenance(103), pucConfig(104), pucFan1Fault(105), pucFan2Fault(106), pucFan3Fault(107), pucFan4Fault(108), pucPump1Fault(109), pucPump2Fault(110), pucPressureFault(111), pucFilter(117), pucPuOff(118), rackProbeNotCalibrated(119), rackTemperatureWarning(120), rackSumFault(121), rackAbsorberFault(122), rackOvervoltageProtection(123), psu1Fault(124), psu2Fault(125), psuRFault(126), ampDriverFault(127), ctxPowerFault(128), ampRegulationFault(129) } | current | Inserted information in the logbook of outputstage. |
| LogbookEntryMessagesXV703 | INTEGER { noNetCCUConnection(0), summaryFault(1), summaryWarning(2), local(3), on(4), ok(5), fanWarning(7), rfOn(8), updatedBIOS(9), powerSupply(10), boardTemperature(11), fanFault(12), reboot(14), loopOpen(15), noConnection(16), ampFail(17), ifrPllFail(18), rfiPllFail(19), refFreqFail(20), pInFail(21), rfFail(22) } | current | Inserted information in the logbook of XV703 transposers. |
| LogbookEntrySlope | INTEGER { set(1), reset(2) } | current | These are the information which are inserted in the logbook. |
| LogbookMaxEntryNumber | Integer32 (0..255) | current | The maximum number of entries in a logbook. This is used in other MIBs as a placeholder. |
| ProdInfoModuleNameFm | INTEGER { exciter(1), exciterMainboard(2), exciterBootprog(3), exciterBootload(4), exciterOs(5), exciterFpga(6), netCCU(50), rackcontroller(100), amplifier(101) } | current | The product information module names for FM. |
| ProdInfoModuleNameNsu | INTEGER { tcBoard(70) } | current | The product information module names for NSU. |
| ProdInfoModuleNameTv | INTEGER { exciter(1), exciterMainboard(2), exciterInputInterface(3), exciterRfBoard(4), exciterSynth1(5), exciterSynth2(6), exciterSynth3(7), netCCU(50), rackcontroller(100), amplifier(101) } | current | The product information module names for TV. |
| ReadableString | OCTET STRING (SIZE (0..255)) | current | An octet string containing a human-readable string. This string may have originally been encoded as specified in EN 300 468 Annex A, but this is not a requirement. To maintain generality, the information is represented … |
| SwitchOnOff | INTEGER { on(1), off(2) } | current | This is for all on/off-switches. |
| Sx801AmplifierState | INTEGER { off(1), warning(2), ok(3), unknown(4) } | current | Description. |
| TimeOfDay | OCTET STRING (SIZE (2 | 3)) | current | A time of day specification. octets contents range 1 hour 0..23 2 minute 0..59 3 second 0..59 For example, 1:30:17 PM would be displayed as 13:30:17. The second can be omitted. |
| Trigger | INTEGER { idle(1), trigger(2) } | current | Trigger for starting a certain action. idle(1) trigger(2) A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything. |
| TvStandard | INTEGER { atv(1), dvb(2), atsc(3), dtmb(4), mediaFLO(5), test(6), dab(7), isdbt(8), dvbt2(9), inconsistent(100) } | current | The TV standards. The value 'inconsistent' cannot be written. It is shown only when switching from one standard to another in between. |