S5-TOKENRING-MIB
79 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.6.7.1 | Nodes5TrCfg | |||
| 1.3.6.1.4.1.45.1.6.7.2 | Nodes5TrStat | |||
| 1.3.6.1.4.1.45.1.6.7.3 | Nodes5TrRing | |||
| 1.3.6.1.4.1.45.1.6.7.3.1 | Tables5TrRingInfoTable | not-accessible | mandatory | A table containing information about selected rings. The entries in the table may come from several different data sources. The number of entries is determined… |
| 1.3.6.1.4.1.45.1.6.7.3.1.1 | Rows5TrRingInfoEntry | not-accessible | mandatory | A row in Token Ring information table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.1 | Columns5TrRingInfoSrcIndx | read-only | mandatory | The index of the entry in the table. This index identifies the source of the information. Only those sources that provide these statistics are in this table. |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.2 | Columns5TrRingInfoRingNum | read-only | mandatory | The ring number of the ring that is being monitored. Each ring in a multiple ring network is assigned a unique number. Together, a ring and bridge number form … |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.3 | Columns5TrRingInfoStaTableOperSize | read-only | mandatory | The operational size of the station info table (i.e., table s5TrStaInfoTable). This size is the maximum number of stations for which information can be collect… |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.4 | Columns5TrRingInfoActiveStations | read-only | mandatory | The number of active stations on the ring that is being monitored. This is the number of active stations in the station info table (i.e., table s5TrStaInfoTabl… |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.5 | Columns5TrRingInfoDeletes | read-only | mandatory | The number of times stations were removed from table s5TrStaInfoTable due to either aging out or table overflow. |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.6 | Columns5TrRingInfoLastDeleteTime | read-only | mandatory | The value of sysUpTime when the last station was removed from table s5TrStaInfoTable. If this has not occurred, then the value is zero. |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.7 | Columns5TrRingInfoAgeInterval | read-write | mandatory | The amount of time used to age stations from table s5TrStaInfoTable. If a station has had a status of inactive in the last time interval, it may be removed fro… |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.8 | Columns5TrRingInfoMonTime | read-only | mandatory | The length of time that the ring has been monitored by the current source. |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.9 | Columns5TrRingInfoRingState | read-only | mandatory | The current status of this ring. The states are: normalOperation(1).........ring operating without any interruption. ringPurge(2)...............Active monitor … |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.10 | Columns5TrRingInfoBeaconSender | read-only | mandatory | The MAC address of the sender of the last beacon frame detected on the ring. If no beacon frame has been detected, then the value is equal to six octets of zer… |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.11 | Columns5TrRingInfoBeaconNaun | read-only | mandatory | The MAC address of the NAUN (next active upstream neighbor) in the last beacon frame detected on the ring. If no beacon frame has been detected, then the value… |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.12 | Columns5TrRingInfoBeaconType | read-only | mandatory | The type of the last beacon frame detected on the ring. The values are: other(1).................No beacon seen or some other type recovery(2)..............sta… |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.13 | Columns5TrRingInfoLastBeaconTime | read-only | mandatory | The value of sysUpTime when the last beacon frame was detected on the ring. If one has not been detected, then the value is zero. |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.14 | Columns5TrRingInfoActiveMonitor | read-only | mandatory | The MAC address of the Active Monitor on the ring. If this address is unknown, then the value is equal to six octets of zero. |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.15 | Columns5TrRingInfoChanges | read-only | mandatory | The number of add and delete events in the station info table associated with this ring. If no changes have occurred, then the value is zero. |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.16 | Columns5TrRingInfoRingPurgeEvents | read-only | mandatory | The total number of times that the ring has entered the ring purge state from the normal ring state. The ring purge state that comes from the monitor contentio… |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.17 | Columns5TrRingInfoBeaconEvents | read-only | mandatory | The total number of times that the ring has entered the beaconing state. |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.18 | Columns5TrRingInfoBeaconTime | read-only | mandatory | The total amount of time that the ring has been in the beaconing state. This beacon time is updated anytime whenever the ring enters a beaconing state. |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.19 | Columns5TrRingInfoMonitorContentionEvents | read-only | mandatory | The total number of times that the ring has entered the monitor contention state from the normal ring state or ring purge state. The monitor contention state t… |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.20 | Columns5TrRingInfoNaunChanges | read-only | mandatory | The total number of NAUN (Nearest Active Upstream Neighbor) changes that have been measured. This is determined by the number of Report SUA change MAC frames t… |
| 1.3.6.1.4.1.45.1.6.7.3.1.1.21 | Columns5TrRingInfoRingPollEvents | read-only | mandatory | The total number of ring poll events that have been detected. |
| 1.3.6.1.4.1.45.1.6.7.3.2 | Tables5TrStaInfoTable | not-accessible | mandatory | A table containing information about the stations on selected rings. The number of rings is determined by the number of data sources. The number of stations is… |
| 1.3.6.1.4.1.45.1.6.7.3.2.1 | Rows5TrStaInfoEntry | not-accessible | mandatory | A row in the station info table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.1 | Columns5TrStaInfoSrcIndx | read-only | mandatory | The index of the associated entry in table s5TrRingInfoTable. This index identifies the source of the information. Only those sources that provide these statis… |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.2 | Columns5TrStaInfoAddr | read-only | mandatory | The MAC address of the station. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.3 | Columns5TrStaInfoLastNaun | read-only | mandatory | The MAC address of the last known NAUN (Next Active Upstream Neighbor) of this station. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.4 | Columns5TrStaInfoStationStatus | read-only | mandatory | The insertion status of the station on the ring. The values are: active(1)..........Actively participating in ring poll notInRingPoll(2)...Detected on the ring… |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.5 | Columns5TrStaInfoFirstEnterTime | read-only | mandatory | The value of sysUpTime at the time the station first entered the ring. If the time is unknown, the value shall be zero. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.6 | Columns5TrStaInfoLastEnterTime | read-only | mandatory | The value of sysUpTime at the time the station last entered the ring. If the time is unknown, the value shall be zero. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.7 | Columns5TrStaInfoLastExitTime | read-only | mandatory | The value of sysUpTime at the time the station last exited the ring. If the time is unknown, the value shall be zero. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.8 | Columns5TrStaInfoDupAddrErrs | read-only | mandatory | The number of times the station experienced a duplicate address error. This error is reported by a station via a Report Monitor Error MAC frame. Section 3.8.8 … |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.9 | Columns5TrStaInfoInLineErrs | read-only | mandatory | Total number of line errors reported by by the station in error report frames and detected on the ring. Section 3.8.1 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.10 | Columns5TrStaInfoOutLineErrs | read-only | mandatory | Total number of line errors reported by by the nearest active downstream neighbor of the station in error report frames and detected on the ring. Section 3.8.1… |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.11 | Columns5TrStaInfoInternalErrs | read-only | mandatory | Total number of adapter internal errors reported by the station in error report frames and detected on the ring. Section 3.8.2 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.12 | Columns5TrStaInfoInBurstErrs | read-only | mandatory | Total number of burst errors reported by the station in error report frames and detected on the ring. Section 3.8.3 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.13 | Columns5TrStaInfoOutBurstErrs | read-only | mandatory | Total number of burst errors reported by the nearest active downstream neighbor of the station in error report frames and detected on the ring. Section 3.8.3 o… |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.14 | Columns5TrStaInfoInACErrs | read-only | mandatory | Total number of AC (Address Copied) errors reported by the station in error report frames and detected on the ring. Section 3.8.4 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.15 | Columns5TrStaInfoOutACErrs | read-only | mandatory | Total number of AC (Address Copied) errors reported by the nearest active downstream neighbor of the station in error report frames and detected on the ring. S… |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.16 | Columns5TrStaInfoAbortErrs | read-only | mandatory | Total number of abort delimiter transmitted errors reported by the station in error report frames and detected on the ring. Section 3.8.5 of IEEE 802.5 specifi… |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.17 | Columns5TrStaInfoLostFrameErrs | read-only | mandatory | Total number of frames lost errors reported by the station in error report frames and detected on the ring. Section 3.8.6 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.18 | Columns5TrStaInfoCongestionErrs | read-only | mandatory | Total number of receive congestion errors reported by the station in error report frames and detected on the ring. Section 3.8.7 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.19 | Columns5TrStaInfoFrameCopiedErrs | read-only | mandatory | Total number of frame copied errors reported by the station in error report frames and detected on the ring. Section 3.8.8 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.20 | Columns5TrStaInfoFrequencyErrs | read-only | mandatory | Total number of frequency errors reported by the station in error report frames and detected on the ring. Section 3.8.9 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.21 | Columns5TrStaInfoTokenErrs | read-only | mandatory | Total number of token errors reported by the station in error report frames and detected on the ring. Section 3.8.10 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.22 | Columns5TrStaInfoInBeaconErrs | read-only | mandatory | Total number of beacon frames sent by the station and detected on the ring. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.23 | Columns5TrStaInfoOutBeaconErrs | read-only | mandatory | Total number of beacon frames detected on the ring that name the station as the NAUN. |
| 1.3.6.1.4.1.45.1.6.7.3.2.1.24 | Columns5TrStaInfoInsertions | read-only | mandatory | The number of times that the station was detected inserting onto the ring. |
| 1.3.6.1.4.1.45.1.6.7.3.3 | Tables5TrStaCtlTable | not-accessible | mandatory | A table containing control objects and addition information about the stations on selected rings. The number of rings is determined by the number of data sourc… |
| 1.3.6.1.4.1.45.1.6.7.3.3.1 | Rows5TrStaCtlEntry | not-accessible | mandatory | A row in the station control table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.1 | Columns5TrStaCtlSrcIndx | read-only | mandatory | The first index of the associated entry in table s5TrStaInfoTable. This index identifies the source of the information. Only those sources that provide these s… |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.2 | Columns5TrStaCtlAddr | read-only | mandatory | The second index of the associated entry in table s5TrStaInfoTable. This index is the MAC address of the station. |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.3 | Columns5TrStaCtlRemove | read-write | mandatory | This is an action object to send a Remove Station MAC frame to the station. The following value can be written: remove(2)...causes a frame to be sent The follo… |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.4 | Columns5TrStaCtlUpdateStats | read-write | mandatory | This is an action object used to cause configuration information for the station to be updated. The following value can be written: update(4)...causes update t… |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.5 | Columns5TrStaCtlUpdateTime | read-only | mandatory | The value of sysUpTime at the time the configuration information was last updated (completely). If the information has never been gotten, then the value is zer… |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.6 | Columns5TrStaCtlProductId | read-only | mandatory | A brief string describing the product specified by the vendor. The value is a zero length string when not valid (or available). Section 3.3.2.14 of IEEE 802.5 … |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.7 | Columns5TrStaCtlNodeVersion | read-only | mandatory | A string that represents the version of the station software. The value is a zero length string when not valid (or available). Section 3.3.2.17 of IEEE 802.5 s… |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.8 | Columns5TrStaCtlPhysDrop | read-only | mandatory | The physical location of the station on the ring. The value is 4 octets of zero when not valid (or available). Section 3.3.2.13 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.9 | Columns5TrStaCtlFuncAddr | read-only | mandatory | The functional addresses used by the station. The value is 6 octets of zero when not valid (or available). Section 3.3.2.8 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.10 | Columns5TrStaCtlAuthFuncClass | read-only | mandatory | The functional classes that are allowed to be active in the station. The value is 2 octets of zero when not valid (or available). Section 3.3.2.3 of IEEE 802.5… |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.11 | Columns5TrStaCtlAuthAccPriority | read-only | mandatory | The maximum priority this station is allowed to use. The value is 2 octets of zero when not valid (or available). Section 3.3.2.2 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.12 | Columns5TrStaCtlStationId | read-only | mandatory | This string is used to uniquely identify the station. It may be equal to the station's MAC address. The value is 6 octets of zero when not valid (or available)… |
| 1.3.6.1.4.1.45.1.6.7.3.3.1.13 | Columns5TrStaCtlNumGrpAddr | read-only | mandatory | The group address for the station. The value is zero if not valid or no group address has been assigned. Section 3.3.2.9 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.4 | Nodes5TrTest | |||
| 1.3.6.1.4.1.45.1.6.7.4.1 | Scalars5TrTestPathTestTimer | read-write | mandatory | This is the timeout, in units of hundredths of a second, that the agent will wait for a reply to an LLC TEST command PDU caused by doing a SNMP SET to the obje… |
| 1.3.6.1.4.1.45.1.6.7.4.2 | Scalars5TrTestPathAgeTimer | read-write | mandatory | The amount of time, in units of seconds, that an entry remains in table s5TrTestPathTable before it is automatically removed. This value must be larger than th… |
| 1.3.6.1.4.1.45.1.6.7.4.3 | Tables5TrTestPathTable | not-accessible | mandatory | This table is used to initiate a 'path test' between the agent and a station in the flatnet. To start a path test, a SNMP SET operation is attempted with the v… |
| 1.3.6.1.4.1.45.1.6.7.4.3.1 | Rows5TrTestPathEntry | not-accessible | mandatory | A row in the test path table. Entries can be created with a SNMP SET request by setting the object s5TrTestTpStart to either startTestSourceRoute(2) or startTe… |
| 1.3.6.1.4.1.45.1.6.7.4.3.1.1 | Columns5TrTestTpIfIndex | read-only | mandatory | The index from the ifTable of a token ring interface. This is the source of the TEST command PDU. |
| 1.3.6.1.4.1.45.1.6.7.4.3.1.2 | Columns5TrTestTpAddrTo | read-only | mandatory | The destination MAC address to be used for the testpath operation. |
| 1.3.6.1.4.1.45.1.6.7.4.3.1.3 | Columns5TrTestTpStart | read-write | mandatory | This object is used to start or retry a test or delete an entry. The possible values that can be written are: startTestSourceRoute(2)...Start a path test for n… |
| 1.3.6.1.4.1.45.1.6.7.4.3.1.4 | Columns5TrTestTpStatus | read-only | mandatory | The current status of the test. The possible values are : testInProgress(2)...The path test is currently in progress. testPassed(3).......The path test passed.… |
| 1.3.6.1.4.1.45.1.6.7.4.3.1.5 | Columns5TrTestTpRoute | read-write | mandatory | When this object is written via SNMP it specifies the path to be tested. If this object is not written when the row is created, it is filled in by the agent wh… |
| 1.3.6.1.4.1.45.1.6.7.4.3.1.6 | Columns5TrTestTpDuration | read-only | mandatory | This specifies the round trip time of a successful test in units of hundreds of a second. This object will be equal to the value of s5TrTestPathTimer if the te… |
| 1.3.6.1.4.1.45.1.6.7.4.3.1.7 | Columns5TrTestTpTimeStamp | read-only | mandatory | This is the time stamp (i.e., sysUpTime) of the last time that the path test was run successfully. |