MIB Viewer

SAF-INTEGRAX-MIB

261 objects
SAF Integra-X device management base
Imported Objects
IANAifType-MIBIANAifType
RFC1213-MIBDisplayString PhysAddress
SAF-ENTERPRISEpointToPoint
SAF-INTEGRA-MIBsafIntegra
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks
SNMPv2-TCDateAndTime TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.7571.100.1.1.7.10IdentityintegraXSAF Integra-X device management base
1.3.6.1.4.1.7571.100.1.1.7.10.1ScalarintegraXtimestampread-onlycurrentLast data update time
1.3.6.1.4.1.7571.100.1.1.7.10.2NodeintegraXradio
1.3.6.1.4.1.7571.100.1.1.7.10.2.1NodeintegraXradioA
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.1ScalarintegraXradioAtxPowerread-onlycurrentOutput power of radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.2ScalarintegraXradioAtxFrequencyread-onlycurrentFrequency of radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.3ScalarintegraXradioArxLevelread-onlycurrentLevel of the received signal
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.4ScalarintegraXradioArxLevelStateread-onlycurrentReceived signal level state
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.5ScalarintegraXradioAsideread-onlycurrentRadio side: Low/High
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.6ScalarintegraXradioAtxMuteread-onlycurrentStatus of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.7ScalarintegraXradioAtxMuteDurationread-onlycurrentTime remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining du…
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.8ScalarintegraXradioAduplexShiftread-onlycurrentUtilized duplex shift in kHz
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.9ScalarintegraXradioArxFrequencyread-onlycurrentFrequency of radio receiver
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.10ScalarintegraXradioAtemperatureread-onlycurrentRadio module temperature
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.11ScalarintegraXradioApllread-onlycurrentPLL state of local-oscillator generator
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12TableintegraXradioArangesTablenot-accessiblecurrentNetwork interface port status data.
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1RowintegraXradioArangeEntrynot-accessiblecurrentAn entry containing network physical port status info.
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.1ColumnintegraXradioArangeEntryIndexread-onlycurrentA unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters.
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.2ColumnintegraXradioArangeDescrread-onlycurrent'Minimal' and 'maximal' labels
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.3ColumnintegraXradioArangeTxPowerread-onlycurrentOutput power ranges for radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.1.12.1.4ColumnintegraXradioArangeTxFrequencyread-onlycurrentFrequency ranges for radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.2NodeintegraXradioB
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.1ScalarintegraXradioBtxPowerread-onlycurrentOutput power of radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.2ScalarintegraXradioBtxFrequencyread-onlycurrentFrequency of radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.3ScalarintegraXradioBrxLevelread-onlycurrentLevel of the received signal
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.4ScalarintegraXradioBrxLevelStateread-onlycurrentReceived signal level state
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.5ScalarintegraXradioBsideread-onlycurrentRadio side: Low/High
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.6ScalarintegraXradioBtxMuteread-onlycurrentStatus of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.7ScalarintegraXradioBtxMuteDurationread-onlycurrentTime remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining du…
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.8ScalarintegraXradioBduplexShiftread-onlycurrentUtilized duplex shift in kHz
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.9ScalarintegraXradioBrxFrequencyread-onlycurrentFrequency of radio receiver
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.10ScalarintegraXradioBtemperatureread-onlycurrentRadio module temperature
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.11ScalarintegraXradioBpllread-onlycurrentPLL state of local-oscillator generator
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12TableintegraXradioBrangesTablenot-accessiblecurrentNetwork interface port status data.
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1RowintegraXradioBrangeEntrynot-accessiblecurrentAn entry containing network physical port status info.
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.1ColumnintegraXradioBrangeEntryIndexread-onlycurrentA unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters.
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.2ColumnintegraXradioBrangeDescrread-onlycurrent'Minimal' and 'maximal' labels
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.3ColumnintegraXradioBrangeTxPowerread-onlycurrentOutput power ranges for radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.2.2.12.1.4ColumnintegraXradioBrangeTxFrequencyread-onlycurrentFrequency ranges for radio transmitter
1.3.6.1.4.1.7571.100.1.1.7.10.3NodeintegraXmodem
1.3.6.1.4.1.7571.100.1.1.7.10.3.1NodeintegraXmodemA
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.1ScalarintegraXmodemAacquireStatusread-onlycurrentThis is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails.
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.2ScalarintegraXmodemAnormalizedMseread-onlycurrentCurrent normalized MSE value (floating point value multiplied by 10)
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.3ScalarintegraXmodemAfecLoadread-onlycurrentDecoder stress or FEC load value (floating point in textual representation)
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.4ScalarintegraXmodemAxpdEstread-onlycurrentXPD Estimated value (floating point value multiplied by 10)
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.5ScalarintegraXmodemAacquireLastStatusDetailsread-onlycurrentThis is the last status of successfull or unsuccessful modem data acquire
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.6ScalarintegraXmodemAtemperatureread-onlycurrentModem DSP temperature
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.7ScalarintegraXmodemArxModulationread-onlycurrentCurrent (actual) Rx Modulation
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.8ScalarintegraXmodemAtxModulationread-onlycurrentCurrent (actual) Tx Modulation
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.9ScalarintegraXmodemArxCapacityread-onlycurrentRx ethernet capacity in kilobits per second
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.10ScalarintegraXmodemAtxCapacityread-onlycurrentTx ethernet capacity in kilobits per second
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.11ScalarintegraXmodemAacmEngineread-onlycurrentACM engine status
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.12ScalarintegraXmodemAcarrierOffsetread-onlycurrentModem carrier offset
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.13ScalarintegraXmodemAcountTimeread-onlycurrentModem performance count time
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.14ScalarintegraXmodemAerroredBlockread-onlycurrentModem performance errored blocks
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.15ScalarintegraXmodemAerroredSecondread-onlycurrentModem performance errored seconds
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.16ScalarintegraXmodemAseverelyErroredSecondread-onlycurrentModem performance severely errored seconds
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.17ScalarintegraXmodemAbackgroundBlockErrorread-onlycurrentModem performance background block errors
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.18ScalarintegraXmodemAtotalBlockNumberread-onlycurrentModem performance total block number
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.19ScalarintegraXmodemAerroredSecondRatioread-onlycurrentModem performance errored second ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.20ScalarintegraXmodemAseverelyErroredSecondRatioread-onlycurrentModem performance severely errored second ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.21ScalarintegraXmodemAbackgroundBlockErrorRatioread-onlycurrentModem performance background block error ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.22ScalarintegraXmodemAuptimeread-onlycurrentModem performance : uptime
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.23ScalarintegraXmodemAunavailtimeread-onlycurrentModem performance : unavailtime
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.24ScalarintegraXmodemAfecLdpcBlockCounterread-onlycurrentModem FEC load block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.25ScalarintegraXmodemAfecLdpcUncorrectedBlockCounterread-onlycurrentModem FEC load uncorrected block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.26ScalarintegraXmodemAfecLdpcUncorrectedPercentread-onlycurrentModem FEC load uncorrected percent
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.27ScalarintegraXmodemAfecRsBlockCounterread-onlycurrentModem FEC load RS block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.28ScalarintegraXmodemAfecRsUncorrectedBlockCounterread-onlycurrentModem FEC load RS uncorrected block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.29ScalarintegraXmodemAmodulationACMminread-onlycurrentMinimal modulation for ACM enabled profile
1.3.6.1.4.1.7571.100.1.1.7.10.3.1.30ScalarintegraXmodemAmodulationACMmaxread-onlycurrentMaximal modulation for ACM enabled profile
1.3.6.1.4.1.7571.100.1.1.7.10.3.2NodeintegraXmodemB
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.1ScalarintegraXmodemBacquireStatusread-onlycurrentThis is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails.
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.2ScalarintegraXmodemBnormalizedMseread-onlycurrentCurrent normalized MSE value (floating point value multiplied by 10)
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.3ScalarintegraXmodemBfecLoadread-onlycurrentDecoder stress or FEC load value (floating point in textual representation)
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.4ScalarintegraXmodemBxpdEstread-onlycurrentXPD Estimated value (floating point value multiplied by 10)
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.5ScalarintegraXmodemBacquireLastStatusDetailsread-onlycurrentThis is the last status of successfull or unsuccessful modem data acquire
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.6ScalarintegraXmodemBtemperatureread-onlycurrentModem DSP temperature
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.7ScalarintegraXmodemBrxModulationread-onlycurrentCurrent (actual) Rx Modulation
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.8ScalarintegraXmodemBtxModulationread-onlycurrentCurrent (actual) Tx Modulation
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.9ScalarintegraXmodemBrxCapacityread-onlycurrentRx ethernet capacity in kilobits per second
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.10ScalarintegraXmodemBtxCapacityread-onlycurrentTx ethernet capacity in kilobits per second
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.11ScalarintegraXmodemBacmEngineread-onlycurrentACM engine status
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.12ScalarintegraXmodemBcarrierOffsetread-onlycurrentModem carrier offset
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.13ScalarintegraXmodemBcountTimeread-onlycurrentModem performance count time
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.14ScalarintegraXmodemBerroredBlockread-onlycurrentModem performance errored blocks
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.15ScalarintegraXmodemBerroredSecondread-onlycurrentModem performance errored seconds
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.16ScalarintegraXmodemBseverelyErroredSecondread-onlycurrentModem performance severely errored seconds
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.17ScalarintegraXmodemBbackgroundBlockErrorread-onlycurrentModem performance background block errors
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.18ScalarintegraXmodemBtotalBlockNumberread-onlycurrentModem performance total block number
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.19ScalarintegraXmodemBerroredSecondRatioread-onlycurrentModem performance errored second ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.20ScalarintegraXmodemBseverelyErroredSecondRatioread-onlycurrentModem performance severely errored second ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.21ScalarintegraXmodemBbackgroundBlockErrorRatioread-onlycurrentModem performance background block error ratio
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.22ScalarintegraXmodemBuptimeread-onlycurrentModem performance : uptime
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.23ScalarintegraXmodemBunavailtimeread-onlycurrentModem performance : unavailtime
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.24ScalarintegraXmodemBfecLdpcBlockCounterread-onlycurrentModem FEC load block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.25ScalarintegraXmodemBfecLdpcUncorrectedBlockCounterread-onlycurrentModem FEC load uncorrected block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.26ScalarintegraXmodemBfecLdpcUncorrectedPercentread-onlycurrentModem FEC load uncorrected percent
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.27ScalarintegraXmodemBfecRsBlockCounterread-onlycurrentModem FEC load RS block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.28ScalarintegraXmodemBfecRsUncorrectedBlockCounterread-onlycurrentModem FEC load RS uncorrected block counter
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.29ScalarintegraXmodemBmodulationACMminread-onlycurrentMinimal modulation for ACM enabled profile
1.3.6.1.4.1.7571.100.1.1.7.10.3.2.30ScalarintegraXmodemBmodulationACMmaxread-onlycurrentMaximal modulation for ACM enabled profile
1.3.6.1.4.1.7571.100.1.1.7.10.3.3ScalarintegraXmodemBandwidthread-onlycurrentSignal bandwidth
1.3.6.1.4.1.7571.100.1.1.7.10.3.4ScalarintegraXmodemModulationread-onlycurrentModulation (preferred)
1.3.6.1.4.1.7571.100.1.1.7.10.4NodeintegraXsystem
1.3.6.1.4.1.7571.100.1.1.7.10.4.2ScalarintegraXsysCPUtemperatureread-onlycurrentSystem CPU temperature
1.3.6.1.4.1.7571.100.1.1.7.10.4.3ScalarintegraXsysLicenseExpireread-onlycurrentLicense expires after number of seconds. In the case of -1, check licenseGenStatus status
1.3.6.1.4.1.7571.100.1.1.7.10.4.4ScalarintegraXsysLicenseGenStatusread-onlycurrentLicense General status.
1.3.6.1.4.1.7571.100.1.1.7.10.4.5ScalarintegraXsysPSUvoltageread-onlycurrentPower voltage in mV
1.3.6.1.4.1.7571.100.1.1.7.10.4.6ScalarintegraXsysPSUcurrentread-onlycurrentPower current in mA
1.3.6.1.4.1.7571.100.1.1.7.10.4.7ScalarintegraXsysPSUpowerread-onlycurrentPower consumption in mW
1.3.6.1.4.1.7571.100.1.1.7.10.4.8ScalarintegraXsysBoardTemperatureread-onlycurrentSystem temperature
1.3.6.1.4.1.7571.100.1.1.7.10.4.9ScalarintegraXsysFreeMemoryread-onlycurrentSystem free memory
1.3.6.1.4.1.7571.100.1.1.7.10.4.10ScalarintegraXsysCPUidleread-onlycurrentSystem CPU idle
1.3.6.1.4.1.7571.100.1.1.7.10.4.11ScalarintegraXsysDeviceTyperead-onlycurrentDevice type name
1.3.6.1.4.1.7571.100.1.1.7.10.4.12ScalarintegraXsysDeviceSerialread-onlycurrentDevice serial number
1.3.6.1.4.1.7571.100.1.1.7.10.4.13ScalarintegraXsysDeviceProductModelread-onlycurrentDevice product model code
1.3.6.1.4.1.7571.100.1.1.7.10.4.14ScalarintegraXsysFanErrorread-onlycurrentDevice fan 1 and fan 2 error status
1.3.6.1.4.1.7571.100.1.1.7.10.4.15ScalarintegraXsysSw1v0coreread-onlycurrentSW_1V0_CORE
1.3.6.1.4.1.7571.100.1.1.7.10.4.16ScalarintegraXsysSw1v0avddread-onlycurrentSW_1V0_AVDD
1.3.6.1.4.1.7571.100.1.1.7.10.4.17ScalarintegraXsysSw1v2aread-onlycurrentSW_1V2A
1.3.6.1.4.1.7571.100.1.1.7.10.4.18ScalarintegraXsysSw1v5ddrread-onlycurrentSW_1V5_DDR
1.3.6.1.4.1.7571.100.1.1.7.10.4.19ScalarintegraXsysSw1v8read-onlycurrentSW_1V8
1.3.6.1.4.1.7571.100.1.1.7.10.4.20ScalarintegraXsysSw2v5read-onlycurrentSW_2V5
1.3.6.1.4.1.7571.100.1.1.7.10.4.21ScalarintegraXsysSw3v3read-onlycurrentSW_3V3
1.3.6.1.4.1.7571.100.1.1.7.10.4.22ScalarintegraXsysVttrefPsread-onlycurrentVTTVREF_PS
1.3.6.1.4.1.7571.100.1.1.7.10.4.23ScalarintegraXsysVttddrPsread-onlycurrentVTTDDR_PS
1.3.6.1.4.1.7571.100.1.1.7.10.4.24ScalarintegraXsysZq1v0read-onlycurrentZQ_1V0
1.3.6.1.4.1.7571.100.1.1.7.10.4.25ScalarintegraXsysZq1v5read-onlycurrentZQ_1V5
1.3.6.1.4.1.7571.100.1.1.7.10.4.26ScalarintegraXsysZq1v8read-onlycurrentZQ_1V8
1.3.6.1.4.1.7571.100.1.1.7.10.4.27ScalarintegraXsysZq2v5read-onlycurrentZQ_2V5
1.3.6.1.4.1.7571.100.1.1.7.10.4.28ScalarintegraXsysZq3v3read-onlycurrentZQ_3V3
1.3.6.1.4.1.7571.100.1.1.7.10.4.29ScalarintegraXsys5v0dread-onlycurrent5V0D
1.3.6.1.4.1.7571.100.1.1.7.10.4.30ScalarintegraXsysSw1v2read-onlycurrentSW_1V2
1.3.6.1.4.1.7571.100.1.1.7.10.4.31ScalarintegraXsysMdmVddcAvsread-onlycurrentMDM_VDDC_AVS
1.3.6.1.4.1.7571.100.1.1.7.10.4.32ScalarintegraXsysMdm3v3read-onlycurrentMDM_3V3
1.3.6.1.4.1.7571.100.1.1.7.10.4.33ScalarintegraXsysMdm1v0aPmread-onlycurrentMDM_1V0A_PM
1.3.6.1.4.1.7571.100.1.1.7.10.4.34ScalarintegraXsysMdm1v0aread-onlycurrentMDM_1V0A
1.3.6.1.4.1.7571.100.1.1.7.10.4.35ScalarintegraXsysMdm1v8aread-onlycurrentMDM_1V8A
1.3.6.1.4.1.7571.100.1.1.7.10.4.36ScalarintegraXsysMdmDAC02v5aread-onlycurrentMDM_DAC0_2V5A
1.3.6.1.4.1.7571.100.1.1.7.10.4.37ScalarintegraXsysMdmDAC12v5read-onlycurrentMDM_DAC1_2V5A
1.3.6.1.4.1.7571.100.1.1.7.10.4.38ScalarintegraXsysMdmDAC22v5read-onlycurrentMDM_DAC2_2V5A
1.3.6.1.4.1.7571.100.1.1.7.10.4.39ScalarintegraXsysMdm1v8ioread-onlycurrentMDM_1V8_IO
1.3.6.1.4.1.7571.100.1.1.7.10.4.40ScalarintegraXsysMdm3v3ioread-onlycurrentMDM_3V3_IO
1.3.6.1.4.1.7571.100.1.1.7.10.4.41ScalarintegraXsys3v3Radioread-onlycurrent3V3_RADIO
1.3.6.1.4.1.7571.100.1.1.7.10.4.42ScalarintegraXsysMdm4v0read-onlycurrentMDM_4V0
1.3.6.1.4.1.7571.100.1.1.7.10.4.43ScalarintegraXsys5v0nRadioread-onlycurrent5V0N_RADIO
1.3.6.1.4.1.7571.100.1.1.7.10.4.44ScalarintegraXsysCoreVddSnsread-onlycurrentCORE_VDD_SNS
1.3.6.1.4.1.7571.100.1.1.7.10.4.45ScalarintegraXsys40v0RadioSnsread-onlycurrent40V0_RADIO_SNS
1.3.6.1.4.1.7571.100.1.1.7.10.4.46NodeintegraXsysServices
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.1ScalarintegraXsysServicesRebootread-writecurrentThis object can only be set to 1. It initiates system reboot immediately.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.2ScalarintegraXsysServicesFtpSwitchread-writecurrentStatus and on/off switch for the FTP server
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.3ScalarintegraXsysServicesFwCurrInforead-onlycurrentCurrently running FW info. Same output as in RFC1213-MIB::sysDescr.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.4ScalarintegraXsysServicesFwAvailViewread-onlycurrentList FW available for installation (uploaded).
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.5ScalarintegraXsysServicesFwRemoveread-writecurrentRemove available (uploaded) FW version. View FW versions in integraXsysServicesFwAvailView. Send number corresponding to info in integraXsysServicesFwAvailView.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.6ScalarintegraXsysServicesFwRemoveAllread-writecurrentRemove all available (uploaded) FW versions.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.7ScalarintegraXsysServicesFwUploadread-writecurrentUpload FW (make available for installation). You need to upload a firmware to FTP ftp://anonymous@DEVICE_IP:/firmware/ first! You must have only 1 firmware in …
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.8ScalarintegraXsysServicesFwInstread-writecurrentInstall FW version. You need check integraXsysServicesFwAvailView to see FW versions ready for install. This option only starts installation on the device and …
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.9ScalarintegraXsysServicesFwSwitchRunningread-onlycurrentFW running bank info. Use integraXsysServicesFwSwitchNext to view and switch FW bank for the next boot.
1.3.6.1.4.1.7571.100.1.1.7.10.4.46.10ScalarintegraXsysServicesFwSwitchNextread-writecurrentFW next boot bank info. Set request can change FW bank for the next boot. View running FW bank number in integraXsysServicesFwSwitchRunning.
1.3.6.1.4.1.7571.100.1.1.7.10.5NodeintegraXethernet
1.3.6.1.4.1.7571.100.1.1.7.10.5.1TableintegraXifStatusTablenot-accessiblecurrentNetwork interface port status data.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1RowintegraXifPortEntrynot-accessiblecurrentAn entry containing network physical port status info.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.1ColumnintegraXifPortStatIndexread-onlycurrentA unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.2ColumnintegraXifPortStatDescrread-onlycurrentPhysical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP and WAN is radio port.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.3ColumnintegraXifPortTyperead-onlycurrentThe type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.4ColumnintegraXifPortMturead-onlycurrentMaximum transmission unit value in bytes.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.5ColumnintegraXifPortHighSpeedread-onlycurrentLink speed in 1 000 000 * bits per second.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.6ColumnintegraXifPortPhysAddressread-onlycurrentThe interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.…
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.7ColumnintegraXifPortAdminStatusread-onlycurrentDesired state of network interfaces. Interfaces can be enabled(1), disabled(2), unknown(3) (no info received).
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.8ColumnintegraXifPortOperStatusread-onlycurrentActual state of interfaces. Link can be up(1), down(2) or in unknown(3) state.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.9ColumnintegraXifPortLastChangeread-onlycurrentThis parameter value is always 0 at the moment.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.10ColumnintegraXifPortAutonegread-onlycurrentAuto-negotiation status. Unknown means no info was received.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.11ColumnintegraXifPortDuplexread-onlycurrentDuplex status for the interface.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.12ColumnintegraXifPortSyncEthActiveread-onlycurrentSynchronous Ethernet status. Can be active(1) or inactive(0).
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.13ColumnintegraXifPortSyncEthPrioread-onlycurrentSynchronous Ethernet priority.
1.3.6.1.4.1.7571.100.1.1.7.10.5.1.1.14ColumnintegraXifPortFlowControlread-onlycurrentFlow control status.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2TableintegraXifStatisticsTablenot-accessiblecurrentNetwork interface port statistics data.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1RowintegraXifPortStcEntrynot-accessiblecurrentAn entry containing network physical port statistics counter data.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.1ColumnintegraXifPortStcIndexread-onlycurrentA unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.2ColumnintegraXifPortStcDescrread-onlycurrentPhysical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.3ColumnintegraXifTimePassedread-onlycurrentStatistics collection time.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.4ColumnintegraXifIngressPacketsread-onlycurrentPackets that ingress on the port.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.5ColumnintegraXifIngressBytesread-onlycurrentBytes that ingress on the port.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.6ColumnintegraXifEgressPacketsread-onlycurrentPackets that egress on the port.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.7ColumnintegraXifEgressBytesread-onlycurrentBytes that egress on the port.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.8ColumnintegraXifEtherStatsMulticastPktsread-onlycurrentThe total number of good packets (both received and transmitted) that were directed to a multicast address. Note that this number does not include packets dire…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.9ColumnintegraXifEtherStatsBroadcastPktsread-onlycurrentThe total number of good packets (both received and transmitted) that were directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.10ColumnintegraXifEtherStatsPkts64Octetsread-onlycurrentThe total number of packets (including bad packets) (both received and transmitted) that were 64 octets in length (excluding framing bits but including FCS oct…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.11ColumnintegraXifEtherStatsPkts65to127Octetsread-onlycurrentThe total number of packets (including bad packets) (both received and transmitted) that were between 65 and 127 octets in length inclusive (excluding framing …
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.12ColumnintegraXifEtherStatsPkts128to255Octetsread-onlycurrentThe total number of packets (including bad packets) (both received and transmitted) that were between 128 and 255 octets in length inclusive (excluding framing…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.13ColumnintegraXifEtherStatsPkts256to511Octetsread-onlycurrentThe total number of packets (including bad packets) (both received and transmitted) that were between 256 and 511 octets in length inclusive (excluding framing…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.14ColumnintegraXifEtherStatsPkts512to1023Octetsread-onlycurrentThe total number of packets (including bad packets) (both received and transmitted) that were between 512 and 1023 octets in length inclusive (excluding framin…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.15ColumnintegraXifEtherStatsPkts1024to1518Octetsread-onlycurrentThe total number of packets (including bad packets) (both received and transmitted) that were between 1024 and 1518 octets in length inclusive (excluding frami…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.16ColumnintegraXifEtherStatsOversizePktsread-onlycurrentThe number of packets (both received and transmitted) that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise we…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.17ColumnintegraXifEtherRxOversizePktsread-onlycurrentThe number of packets received that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.18ColumnintegraXifEtherTxOversizePktsread-onlycurrentThe number of packets transmitted that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.19ColumnintegraXifEtherStatsOctetsread-onlycurrentTotal number of octets of data (including those in bad packets) both received and transmitted.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.20ColumnintegraXifEtherStatsPktsread-onlycurrentTotal number of packets (including bad packets) both received and transmitted.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.21ColumnintegraXifEtherStatsTXNoErrorsread-onlycurrentNumber of packets that were transmitted without errors.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.22ColumnintegraXifEtherStatsRXNoErrorsread-onlycurrentNumber of packets that were received without errors.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.23ColumnintegraXifEtherStatsPkts1519to1522Octetsread-onlycurrentThe total number of packets (including bad packets) (both received and transmitted) that were between 1519 and 1522 octets in length inclusive (excluding frami…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.24ColumnintegraXifIfInOctetsread-onlycurrentTotal number of octets of data (including those in bad packets) that were received.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.25ColumnintegraXifIfOutOctetsread-onlycurrentTotal number of octets of data (including those in bad packets) that were transmitted.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.26ColumnintegraXifDot1dTpPortInFramesread-onlycurrentThe number of frames that have been received by this port from its segment.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.27ColumnintegraXifDot1dTpPortOutFramesread-onlycurrentThe number of frames that have been transmitted by this port to its segment.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.28ColumnintegraXifReceivedPkts64Octetsread-onlycurrentTotal number of received packets that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.29ColumnintegraXifTransmittedPkts64Octetsread-onlycurrentTotal number of transmitted packets that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.30ColumnintegraXifReceivedPkts65to127Octetsread-onlycurrentTotal number of received packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.31ColumnintegraXifTransmittedPkts65to127Octetsread-onlycurrentTotal number of transmitted packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.32ColumnintegraXifReceivedPkts128to255Octetsread-onlycurrentTotal number of received packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.33ColumnintegraXifTransmittedPkts128to255Octetsread-onlycurrentTotal number of transmitted packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.34ColumnintegraXifReceivedPkts256to511Octetsread-onlycurrentTotal number of received packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.35ColumnintegraXifTransmittedPkts256to511Octetsread-onlycurrentTotal number of transmitted packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.36ColumnintegraXifReceivedPkts512to1023Octetsread-onlycurrentTotal number of received packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.37ColumnintegraXifTransmittedPkts512to1023Octetsread-onlycurrentTotal number of transmitted packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.38ColumnintegraXifReceivedPkts1024to1518Octetsread-onlycurrentTotal number of received packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.39ColumnintegraXifTransmittedPkts1024to1518Octetsread-onlycurrentTotal number of transmitted packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.40ColumnintegraXifIfInBroadcastPktsread-onlycurrentThe total number of received good packets that were directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.41ColumnintegraXifIfOutBroadcastPktsread-onlycurrentThe total number of transmitted good packets that were directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.42ColumnintegraXifIfInMulticastPktsread-onlycurrentThe total number of received good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.43ColumnintegraXifIfOutMulticastPktsread-onlycurrentThe total number of transmitted good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.44ColumnintegraXifDot3InPauseFramesread-onlycurrentA count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is o…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.45ColumnintegraXifDot3OutPauseFramesread-onlycurrentA count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface i…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.46ColumnintegraXifEtherStatsUndersizePktsread-onlycurrentThe total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.47ColumnintegraXifEtherStatsFragmentsread-onlycurrentThe total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.48ColumnintegraXifEtherStatsCRCAlignErrorsread-onlycurrentThe total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had eit…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.49ColumnintegraXifEtherStatsJabbersread-onlycurrentThe total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Seq…
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.50ColumnintegraXifIngressBPSread-onlycurrentIngoing data transfer rate in bytes per second.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.51ColumnintegraXifIngressPPSread-onlycurrentIngoing data transfer rate in packets per second.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.52ColumnintegraXifEgressBPSread-onlycurrentOutgoing data transfer rate in bytes per second.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.53ColumnintegraXifEgressPPSread-onlycurrentOutgoing data transfer rate in packets per second.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.54ColumnintegraXifAllCoSQoutPacketsread-onlycurrentAll CoSQ outgoing packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.55ColumnintegraXifAllCoSQoutBytesread-onlycurrentAll CoSQ outgoing bytes.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.56ColumnintegraXifAllCoSQdroppedPacketsread-onlycurrentAll CoSQ dropped packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.57ColumnintegraXifAllCoSQdroppedBytesread-onlycurrentAll CoSQ dropped bytes.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.58ColumnintegraXifProcessedRxPacketsread-onlycurrentProcessed received packets.
1.3.6.1.4.1.7571.100.1.1.7.10.5.2.1.59ColumnintegraXifProcessedRxBytesread-onlycurrentProcessed received bytes.
1.3.6.1.4.1.7571.100.1.1.7.10.5.3ScalarintegraXifLspPortAdminStateread-onlycurrentLSP port status.
1.3.6.1.4.1.7571.100.1.1.7.10.5.4ScalarintegraXifLspPortListread-onlycurrentLSP port status.
1.3.6.1.4.1.7571.100.1.1.7.10.5.5ScalarintegraXifLspPortStatusread-onlycurrentLSP port status.
1.3.6.1.4.1.7571.100.1.1.7.10.6ScalarintegraXexecuteConfigread-writecurrentThis object can only be set to 1. It initiates new running configuration applying using values, that have been set before. Setting it when no new changes are a…
1.3.6.1.4.1.7571.100.1.1.7.10.7ScalarintegraXneedStoreread-onlycurrentThis object shows if there is unsaved, but executed (running) configuration. Unsaved changes will be lost after device reboot. Unsaved entities are shown bit w…
1.3.6.1.4.1.7571.100.1.1.7.10.8ScalarintegraXstoreConfigread-writecurrentThis object can only be set to 1. It initiates saving of running configuration. It will only work if there are unsaved, but executed (running) changes (configu…
1.3.6.1.4.1.7571.100.1.1.7.10.9NodeintegraXnetCfg
1.3.6.1.4.1.7571.100.1.1.7.10.9.1ScalarintegraXnetCfgIPaddressread-writecurrentLocal IP address
1.3.6.1.4.1.7571.100.1.1.7.10.9.2ScalarintegraXnetCfgIPmaskread-writecurrentLocal IP mask
1.3.6.1.4.1.7571.100.1.1.7.10.9.3ScalarintegraXnetCfgIPgatewayread-writecurrentIP gateway Send '0' or '255.255.255.255' to clear.
1.3.6.1.4.1.7571.100.1.1.7.10.9.4ScalarintegraXnetCfgRemoteIPaddressread-onlycurrentRemote IP address
1.3.6.1.4.1.7571.100.1.1.7.10.10NodeintegraXConformance
1.3.6.1.4.1.7571.100.1.1.7.10.10.1NodeintegraXCompliances
1.3.6.1.4.1.7571.100.1.1.7.10.10.1.1ComplianceintegraXCompliancecurrentThe compliance statement for SNMP engine which implements the SAF Tehnika Integra-X device.
1.3.6.1.4.1.7571.100.1.1.7.10.10.2NodeintegraXGroups
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.1GroupintegraXMiscGroupcurrentmisc data
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.2GroupintegraXRadioGroupcurrentRadio group.
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.3GroupintegraXModemGroupcurrentModem group.
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.4GroupintegraXSystemGroupcurrentSystem group.
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.5GroupintegraXEthernetGeneralGroupcurrentA collection to objects, providing info applicable to all network interfaces.
1.3.6.1.4.1.7571.100.1.1.7.10.10.2.6GroupintegraXEthernetMiiPortGroupcurrentA collection of objects, providing info applicable only to MII group interfaces.
Type Definitions
NameSyntaxStatusDescription
FixedDiv10Integer32currentFixed point, two decimals
FixedDiv20Integer32currentFixed point, two decimals