SALIX-DS0-MIB
20 objects
The MIB describing SALIX specific DS0 objects
Imported Objects
| DS0-MIB | dsx0ConfigEntry |
| IF-MIB | InterfaceIndex |
| RFC1213-MIB | DisplayString |
| SALIX-MIB | platform1 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2158.5.1.4 | IdentitysalixDsx0MIB | The MIB describing SALIX specific DS0 objects | ||
| 1.3.6.1.4.1.2158.5.1.4.1 | NodesalixDsx0MIBObjects | |||
| 1.3.6.1.4.1.2158.5.1.4.1.1 | TablesalixDsx0CrossConnectTable | not-accessible | current | The table that describes the active DS0 Cross Connections on the system. There should be one entry for each active Cross Connect on the system. |
| 1.3.6.1.4.1.2158.5.1.4.1.1.1 | RowsalixDsx0CrossConnectEntry | not-accessible | current | An entry in the ITX DS0 cross connect table. This entry describes the status of the DS0 cross connect, and also provides information describing the cross conne… |
| 1.3.6.1.4.1.2158.5.1.4.1.1.1.1 | ColumnsalixDsx0CrossConnectHighInterface | not-accessible | current | The high ifIndex for identifying the cross connect. Identifies the DS0 Channel involved in the cross connect. The salixDsx0CrossConnectHighInterface value shou… |
| 1.3.6.1.4.1.2158.5.1.4.1.1.1.2 | ColumnsalixDsx0CrossConnectLowInterface | not-accessible | current | The low ifIndex for identifying the cross connect. Identifies the DS0 Channel involved in the cross connect. The salixDsx0CrossConnectLowInterface value should… |
| 1.3.6.1.4.1.2158.5.1.4.1.1.1.3 | ColumnsalixDsx0CrossConnectDirection | read-only | current | This attribute describes the direction of traffic flow the DS0 cross connect. high2low(1) - Traffic flows from the high interface to the low interface in the c… |
| 1.3.6.1.4.1.2158.5.1.4.1.1.1.4 | ColumnsalixDsx0CrossConnectOperStatus | read-only | current | This attribute indicates the operational state of the DS0 cross connection. up(1) - The cross connect is up and active down(2) - The cross connect is down and … |
| 1.3.6.1.4.1.2158.5.1.4.1.1.1.5 | ColumnsalixDsx0CrossConnectStartTime | read-only | current | The time at which the cross connect was created |
| 1.3.6.1.4.1.2158.5.1.4.1.1.1.6 | ColumnsalixDsx0CrossConnectRowStatus | read-write | current | The status of this entry in the salixDsx0CrossConnectTable. This object is used to delete a salixDsx0CrossConnectTable entry. To destroy a cross connect, set t… |
| 1.3.6.1.4.1.2158.5.1.4.1.2 | TablesalixDsx0ConfigTable | not-accessible | current | The DS0 Configuration table. Augments the DS0 Configuration table from the DS0-MIB. There is an entry in this table for each DS0 interface. |
| 1.3.6.1.4.1.2158.5.1.4.1.2.1 | RowsalixDsx0ConfigEntry | not-accessible | current | An augmented entry in the DS0 Configuration table. There is an entry in this table for each DS0 interface. |
| 1.3.6.1.4.1.2158.5.1.4.1.2.1.1 | ColumnsalixDsx0Status | read-only | current | Indicated the status of the given DS0 notused(1) - The DS0 is not currently being used crossconnect(2) - The DS0 is currently cross connected rtpconnect(3) - T… |
| 1.3.6.1.4.1.2158.5.1.4.2 | NodesalixDsx0MIBTraps | |||
| 1.3.6.1.4.1.2158.5.1.4.2.0 | NodesalixDsx0MIBTrapPrefix | |||
| 1.3.6.1.4.1.2158.5.1.4.3 | NodesalixDsx0MIBCompliance | |||
| 1.3.6.1.4.1.2158.5.1.4.3.1 | NodesalixDsx0Groups | |||
| 1.3.6.1.4.1.2158.5.1.4.3.1.1 | GroupsalixDsx0Group | current | Additional salix specific objects for connections | |
| 1.3.6.1.4.1.2158.5.1.4.3.2 | NodesalixDsx0Compliances | |||
| 1.3.6.1.4.1.2158.5.1.4.3.2.1 | CompliancesalixDsx0Compliance | current | The basic implementation requirements for the SALIX-DS0-MIB. |