SC5002-MIB
120 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.6 | Nodedsx1 | |||
| 1.3.6.1.4.1.498.6.8 | Nodesc5002 | |||
| 1.3.6.1.4.1.498.6.8.1 | Nodesc5002Version | |||
| 1.3.6.1.4.1.498.6.8.1.1 | Scalarsc5002MIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |
| 1.3.6.1.4.1.498.6.8.1.2 | Tablesc5002VersionTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.498.6.8.1.2.1 | Rowsc5002VersionEntry | not-accessible | mandatory | An entry in the GDC SC5002 Version Table. |
| 1.3.6.1.4.1.498.6.8.1.2.1.1 | Columnsc5002VersionIndex | read-only | mandatory | Identifies Version parameters associated with the managed object. |
| 1.3.6.1.4.1.498.6.8.1.2.1.2 | Columnsc5002ActiveFirmwareRev | read-only | mandatory | The version number of the firmware currently executing. The format is MM.NN.BB where: MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix Revision … |
| 1.3.6.1.4.1.498.6.8.1.2.1.3 | Columnsc5002StoredFirmwareRev | read-only | mandatory | The version number of the firmware stored (in a compressed format) but not currently executing. MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix… |
| 1.3.6.1.4.1.498.6.8.1.2.1.4 | Columnsc5002BootRev | read-only | mandatory | The version number of the bootstrap firmware. The version number of the firmware, to allow products to know which revision is installed. The released version n… |
| 1.3.6.1.4.1.498.6.8.1.2.1.5 | Columnsc5002StoredFirmwareStatus | read-only | mandatory | This object represents the state of the Non-Active or Stored firmware: statBlank(1) Factory Default statDownLoading(2) In process of downloading firmware statO… |
| 1.3.6.1.4.1.498.6.8.1.2.1.6 | Columnsc5002SwitchActiveFirmware | read-write | mandatory | This object is used to switch the active executing firmware from the version in sc5002ActiveRev to the version in sc5002StoredRev. When a switchActive(2) is se… |
| 1.3.6.1.4.1.498.6.8.1.2.1.7 | Columnsc5002DownloadingMode | read-write | mandatory | This object is used to configure the download mode: disableAll(1) Prevents any firmware downloading to SC5002 enableAndWait(2) Allows downloading zipped code t… |
| 1.3.6.1.4.1.498.6.8.1.2.1.8 | Columnsc5002FirmwareRev | read-only | mandatory | |
| 1.3.6.1.4.1.498.6.8.2 | Nodesc5002NetworkCfg | |||
| 1.3.6.1.4.1.498.6.8.2.1 | Tablesc5002NetworkCfgTable | not-accessible | mandatory | This table contains objects that support the specific management requirements for configuring the SC5002 Network Interface level objects. |
| 1.3.6.1.4.1.498.6.8.2.1.1 | Rowsc5002NetworkCfgEntry | not-accessible | mandatory | The sc5002 Network Configuration Table Entry. |
| 1.3.6.1.4.1.498.6.8.2.1.1.1 | Columnsc5002NetworkCfgIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.2.1.1.2 | Columnsc5002E1SignalingMode | read-write | mandatory | Specifies the channel signaling scheme for the E1 network interface. |
| 1.3.6.1.4.1.498.6.8.3 | Nodesc5002Alarms | |||
| 1.3.6.1.4.1.498.6.8.3.1 | Nodesc5002AlarmData | |||
| 1.3.6.1.4.1.498.6.8.3.1.1 | Nodesc5002NoResponse | |||
| 1.3.6.1.4.1.498.6.8.3.1.2 | Nodesc5002DiagRxErr | |||
| 1.3.6.1.4.1.498.6.8.3.1.3 | Nodesc5002PowerUp | |||
| 1.3.6.1.4.1.498.6.8.3.1.4 | Nodesc5002NvRamCorrupt | |||
| 1.3.6.1.4.1.498.6.8.3.1.5 | Nodesc5002UnitFailure | |||
| 1.3.6.1.4.1.498.6.8.3.1.6 | Nodesc5002TimingLoss | |||
| 1.3.6.1.4.1.498.6.8.3.1.7 | Nodesc5002LossOfSignal | |||
| 1.3.6.1.4.1.498.6.8.3.1.8 | Nodesc5002LossOfFrame | |||
| 1.3.6.1.4.1.498.6.8.3.1.9 | Nodesc5002AlarmIndSignal | |||
| 1.3.6.1.4.1.498.6.8.3.1.10 | Nodesc5002FallbackTimingActive | |||
| 1.3.6.1.4.1.498.6.8.3.1.11 | Nodesc5002NearEndLnCodeViol | |||
| 1.3.6.1.4.1.498.6.8.3.1.12 | Nodesc5002NearEndErrSec | |||
| 1.3.6.1.4.1.498.6.8.3.1.13 | Nodesc5002NearEndBkdBlkErr | |||
| 1.3.6.1.4.1.498.6.8.3.1.14 | Nodesc5002NearEndSevErrSec | |||
| 1.3.6.1.4.1.498.6.8.3.1.15 | Nodesc5002NearEndUnavlSec | |||
| 1.3.6.1.4.1.498.6.8.3.1.16 | Nodesc5002FarEndErrSec | |||
| 1.3.6.1.4.1.498.6.8.3.1.17 | Nodesc5002FarEndBkdBlkErr | |||
| 1.3.6.1.4.1.498.6.8.3.1.18 | Nodesc5002FarEndSevErrSec | |||
| 1.3.6.1.4.1.498.6.8.3.1.19 | Nodesc5002FarEndUnavlSec | |||
| 1.3.6.1.4.1.498.6.8.3.2 | Tablesc5002NearEndAlarmCfgTable | not-accessible | mandatory | This table contains entries that configure Near End Alarm reporting. |
| 1.3.6.1.4.1.498.6.8.3.2.1 | Rowsc5002NearEndAlarmCfgEntry | not-accessible | mandatory | An entry in the Near End Alarm Configuration table. |
| 1.3.6.1.4.1.498.6.8.3.2.1.1 | Columnsc5002NearEndAlarmCfgIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.3.2.1.2 | Columnsc5002NearEndAlarmCfgIdentifier | read-only | mandatory | format: iso.org.dod.internet.private.enterprises.gdc. dsx1.sc5002.sc5002Alarms.sc5002AlarmData.ALM example: 1.3.6.1.4.1.498.6.8.4.1.ALM where ALM = 1 for sc500… |
| 1.3.6.1.4.1.498.6.8.3.2.1.3 | Columnsc5002NearEndAlarmWindow | read-write | mandatory | The time period in which a specified number of events must occur, (specified by the alarm's threshold), before declaring an alarm condition. After reporting an… |
| 1.3.6.1.4.1.498.6.8.3.2.1.4 | Columnsc5002NearEndAlarmThreshold | read-write | mandatory | The number of events which must be exceed, within the time period specified by the alarm's window, before declaring an alarm |
| 1.3.6.1.4.1.498.6.8.3.3 | Tablesc5002FarEndAlarmCfgTable | not-accessible | mandatory | This table contains entries that configure Far End Alarm reporting. |
| 1.3.6.1.4.1.498.6.8.3.3.1 | Rowsc5002FarEndAlarmCfgEntry | not-accessible | mandatory | An entry in the Far End Alarm Configuration table. |
| 1.3.6.1.4.1.498.6.8.3.3.1.1 | Columnsc5002FarEndAlarmCfgIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.3.3.1.2 | Columnsc5002FarEndAlarmCfgIdentifier | read-only | mandatory | format: iso.org.dod.internet.private.enterprises.gdc. dsx1.sc5002.sc5002Alarms.sc5002AlarmData.ALM example: 1.3.6.1.4.1.498.6.8.4.1.ALM where ALM = 1 for sc500… |
| 1.3.6.1.4.1.498.6.8.3.3.1.3 | Columnsc5002FarEndAlarmWindow | read-write | mandatory | The time period in which a specified number of events must occur, (specified by the alarm's threshold), before declaring an alarm condition. After reporting an… |
| 1.3.6.1.4.1.498.6.8.3.3.1.4 | Columnsc5002FarEndAlarmThreshold | read-write | mandatory | The number of events which must be exceed, within the time period specified by the alarm's window, before declaring an alarm |
| 1.3.6.1.4.1.498.6.8.4 | Nodesc5002Diagnostics | |||
| 1.3.6.1.4.1.498.6.8.4.1 | Tablesc5002DiagTable | not-accessible | mandatory | The GDC 5002 Diagnostics table. Information in the entries of this table support diagnostics testing, both active testing via patterns, and passive testing via… |
| 1.3.6.1.4.1.498.6.8.4.1.1 | Rowsc5002DiagEntry | not-accessible | mandatory | The GDC 5002 Diagnostics table entry. |
| 1.3.6.1.4.1.498.6.8.4.1.1.1 | Columnsc5002DiagIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.4.1.1.2 | Columnsc5002LoopbackConfig | read-write | mandatory | Selects the test to run. A get of this object returns the test that is currently running. A set of noLoopBack(1) ends the test that is currently running. A set… |
| 1.3.6.1.4.1.498.6.8.4.1.1.3 | Columnsc5002TestResult | read-only | mandatory | The results of the last diagnostic test completed. The value returned is only valid if a get of sc5002LoopbackConfig returns noLoopBack(1). |
| 1.3.6.1.4.1.498.6.8.5 | Nodesc5002Maintenance | |||
| 1.3.6.1.4.1.498.6.8.5.1 | Tablesc5002MaintenanceTable | not-accessible | mandatory | The table describes the maintenance objects for the unit and references the unit interface (cc = 00). |
| 1.3.6.1.4.1.498.6.8.5.1.1 | Rowsc5002MaintenanceEntry | not-accessible | mandatory | An entry in the GDC E1 Maintenance Table. |
| 1.3.6.1.4.1.498.6.8.5.1.1.1 | Columnsc5002MaintenanceLineIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.5.1.1.2 | Columnsc5002SoftReset | read-write | mandatory | Supports the action of soft resetting the unit. When this object is set to reset(1), then the unit performs a soft reset, whose meaning is specific to the type… |
| 1.3.6.1.4.1.498.6.8.5.1.1.3 | Columnsc5002DefaultInit | read-write | mandatory | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault(1) the unit will perform a r… |
| 1.3.6.1.4.1.498.6.8.5.1.1.4 | Columnsc5002NearEndResetStats | read-write | mandatory | Supports the action of soft resetting the sc5002NearEndValidIntervals object. When this object is set to reset(2), then the unit will reset the sc5002ValidInte… |
| 1.3.6.1.4.1.498.6.8.5.1.1.5 | Columnsc5002NearEndStatLastInitialized | read-only | mandatory | Number of seconds from midnight Dec 31, 1969 up until sc5002NearEndValidIntervals was last initialized to zero |
| 1.3.6.1.4.1.498.6.8.5.1.1.6 | Columnsc5002FarEndResetStats | read-write | mandatory | Supports the action of soft resetting the sc5002FarEndValidIntervals object. When this object is set to reset(2), then the unit will reset the sc5002ValidInter… |
| 1.3.6.1.4.1.498.6.8.5.1.1.7 | Columnsc5002FarEndStatLastInitialized | read-only | mandatory | Number of seconds from midnight Dec 31, 1969 up until sc5002FarEndValidIntervals was last initialized to zero |
| 1.3.6.1.4.1.498.6.8.5.1.1.8 | Columnsc5002LedStatus | read-only | mandatory | Returns a bitwise snapshot of the front panel LED state. Octet 1 bit 7 - not used bit 6 - ON bit 5 - INSV bit 4 - RSP bit 3 - TMG bit 2 - NIU bit 1 - D_I bit 0… |
| 1.3.6.1.4.1.498.6.8.5.1.1.9 | Columnsc5002NearEndValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected. The value will be 16 unless the interface was brought on-line within the last 4 hours, in … |
| 1.3.6.1.4.1.498.6.8.5.1.1.10 | Columnsc5002FarEndValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected. The value will be 16 unless the interface was brought on-line within the last 4 hours, in … |
| 1.3.6.1.4.1.498.6.8.5.1.1.11 | Columnsc5002SysUpTime | read-only | mandatory | This variable is used to report the elapsed system tick time for conversion to real time at the controller and is not related to the sysUpTime referenced in MI… |
| 1.3.6.1.4.1.498.6.8.6 | Nodesc5002Performance | |||
| 1.3.6.1.4.1.498.6.8.6.1 | Tablesc5002NearEndCurrent15MinTable | not-accessible | mandatory | The sc5002 Current table. |
| 1.3.6.1.4.1.498.6.8.6.1.1 | Rowsc5002NearEndCurrent15MinEntry | not-accessible | mandatory | An entry in the sc5002 NearEnd Current table. |
| 1.3.6.1.4.1.498.6.8.6.1.1.1 | Columnsc5002NearEndCurrent15MinIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.6.1.1.2 | Columnsc5002NearEndCurrent15MinStat | read-only | mandatory | Returns a bitwise snapshot of the current 15Min statistics. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2.7 f/u 2.6 2^6 . 2.0 2^0 3.7 f/u 3.6 … |
| 1.3.6.1.4.1.498.6.8.6.2 | Tablesc5002NearEndIntervalTable | not-accessible | mandatory | The sc5002 Interval table. |
| 1.3.6.1.4.1.498.6.8.6.2.1 | Rowsc5002NearEndIntervalEntry | not-accessible | mandatory | An entry in the E1 Interval table. |
| 1.3.6.1.4.1.498.6.8.6.2.1.1 | Columnsc5002NearEndIntervalIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.6.2.1.2 | Columnsc5002NearEndIntervalNumber | read-only | mandatory | The number of Errored Seconds encountered by an E1 interface in one of the previous 16, individual 15 minute, intervals. |
| 1.3.6.1.4.1.498.6.8.6.2.1.3 | Columnsc5002NearEndIntervalStat | read-only | mandatory | Returns a bitwise map of the interface in one of the previous 16, individual 15 minute, intervals. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7… |
| 1.3.6.1.4.1.498.6.8.6.3 | Tablesc5002NearEndCurrent24HrTable | not-accessible | mandatory | The E1 Current24Hr table. 4 hour interval. |
| 1.3.6.1.4.1.498.6.8.6.3.1 | Rowsc5002NearEndCurrent24HrEntry | not-accessible | mandatory | An entry in the E1 Total table. |
| 1.3.6.1.4.1.498.6.8.6.3.1.1 | Columnsc5002NearEndCurrent24HrIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.6.3.1.2 | Columnsc5002NearEndCurrent24HrStat | read-only | mandatory | Returns a bitwise map of the current 24 hour table 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^… |
| 1.3.6.1.4.1.498.6.8.6.4 | Tablesc5002NearEndRecent24HrTable | not-accessible | mandatory | The E1 Recent24Hr table. 4 hour interval. |
| 1.3.6.1.4.1.498.6.8.6.4.1 | Rowsc5002NearEndRecent24HrEntry | not-accessible | mandatory | An entry in the E1 Total table. |
| 1.3.6.1.4.1.498.6.8.6.4.1.1 | Columnsc5002NearEndRecent24HrIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.6.4.1.2 | Columnsc5002NearEndRecent24HrStat | read-only | mandatory | Returns a bitwise map of the current 24 hour table 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^… |
| 1.3.6.1.4.1.498.6.8.6.5 | Tablesc5002FarEndCurrent15MinTable | not-accessible | mandatory | The sc5002FarEnd Current 15 minute table. |
| 1.3.6.1.4.1.498.6.8.6.5.1 | Rowsc5002FarEndCurrent15MinEntry | not-accessible | mandatory | An entry in the sc5002FarEnd Current 15 Minute table. |
| 1.3.6.1.4.1.498.6.8.6.5.1.1 | Columnsc5002FarEndCurrent15MinIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.6.5.1.2 | Columnsc5002FarEndCurrent15MinStat | read-only | mandatory | Returns a bitwise map of the far end interface in one of the previous 16, individual 15 minute, intervals. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES .… |
| 1.3.6.1.4.1.498.6.8.6.6 | Tablesc5002FarEndIntervalTable | not-accessible | mandatory | The sc5002FarEnd Interval table. |
| 1.3.6.1.4.1.498.6.8.6.6.1 | Rowsc5002FarEndIntervalEntry | not-accessible | mandatory | An entry in the Interval table. |
| 1.3.6.1.4.1.498.6.8.6.6.1.1 | Columnsc5002FarEndIntervalIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.6.6.1.2 | Columnsc5002FarEndIntervalNumber | read-only | mandatory | A number between 1 and 16, where 1 is the most recently completed 15 minute interval and 16 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.498.6.8.6.6.1.3 | Columnsc5002FarEndIntervalStat | read-only | mandatory | Returns a bitwise map of statistics for the far end interface in the current 15 minute interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2… |
| 1.3.6.1.4.1.498.6.8.6.7 | Tablesc5002CurrentFarEnd24HrTable | not-accessible | mandatory | The Current 24 Hour table. |
| 1.3.6.1.4.1.498.6.8.6.7.1 | Rowsc5002CurrentFarEnd24HrEntry | not-accessible | mandatory | An entry in the Current 24 Hr table. |
| 1.3.6.1.4.1.498.6.8.6.7.1.1 | Columnsc5002CurrentFarEnd24HrIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.6.7.1.2 | Columnsc5002CurrentFarEnd24HrStat | read-only | mandatory | Returns a bitwise map of statistics for the interface in the current 24 hour interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535)… |
| 1.3.6.1.4.1.498.6.8.6.8 | Tablesc5002RecentFarEnd24HrTable | not-accessible | mandatory | The Recent 24 Hour table. |
| 1.3.6.1.4.1.498.6.8.6.8.1 | Rowsc5002RecentFarEnd24HrEntry | not-accessible | mandatory | An entry in the Recent 24 Hr table. |
| 1.3.6.1.4.1.498.6.8.6.8.1.1 | Columnsc5002RecentFarEnd24HrIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.6.8.1.2 | Columnsc5002RecentFarEnd24HrStat | read-only | mandatory | Returns a bitwise map of statistics for the interface in the Recent 24 hour interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) … |
| 1.3.6.1.4.1.498.6.8.6.9 | Tablesc5002NearEndUnavailableTimeRegTable | not-accessible | mandatory | The sc5002 Unavailable Time Register table. |
| 1.3.6.1.4.1.498.6.8.6.9.1 | Rowsc5002NearEndUnavailableTimeRegEntry | not-accessible | mandatory | An entry in the Unavailable Time Register table. |
| 1.3.6.1.4.1.498.6.8.6.9.1.1 | Columnsc5002NearEndUnavailableTimeRegIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.6.9.1.2 | Columnsc5002NearEndUnavailableTimeRegNumber | read-only | mandatory | A number between 1 and 6, where the number is the number of the Unavailable Time Register. |
| 1.3.6.1.4.1.498.6.8.6.9.1.3 | Columnsc5002NearEndUnavailableTimeRegStart | read-only | mandatory | Start time of one of the Unavailable Time Registers. |
| 1.3.6.1.4.1.498.6.8.6.9.1.4 | Columnsc5002NearEndUnavailableTimeRegStop | read-only | mandatory | Stop time of one of the Unavailable Time Registers. |
| 1.3.6.1.4.1.498.6.8.6.10 | Tablesc5002FarEndUnavailableTimeRegTable | not-accessible | mandatory | The sc5002 Unavailable Time Register table. |
| 1.3.6.1.4.1.498.6.8.6.10.1 | Rowsc5002FarEndUnavailableTimeRegEntry | not-accessible | mandatory | An entry in the Unavailable Time Register table. |
| 1.3.6.1.4.1.498.6.8.6.10.1.1 | Columnsc5002FarEndUnavailableTimeRegIndex | read-only | mandatory | Integer value which uniquely identifies the SC5002 to which this entry is applicable. SCinstance is defined to be ssllddcc where: ss (byte value) - physical sh… |
| 1.3.6.1.4.1.498.6.8.6.10.1.2 | Columnsc5002FarEndUnavailableTimeRegNumber | read-only | mandatory | A number between 1 and 6, where the number is the number of the Unavailable Time Register. |
| 1.3.6.1.4.1.498.6.8.6.10.1.3 | Columnsc5002FarEndUnavailableTimeRegStart | read-only | mandatory | Start time of one of the Unavailable Time Registers. |
| 1.3.6.1.4.1.498.6.8.6.10.1.4 | Columnsc5002FarEndUnavailableTimeRegStop | read-only | mandatory | Stop time of one of the Unavailable Time Registers. |