SCC-RAID7-MIB
41 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1386.2.1.1 | Noderaid7DriveUp | This trap is sent whenever the state for a drive changes to data or parity from any other value. An equivalent poll would be to poll raid7NumberDrives and raid… | ||
| 1.3.6.1.4.1.1386.2.1.1 | Noderaid7Sys | |||
| 1.3.6.1.4.1.1386.2.1.1.1 | Scalarraid7SysVersion | read-only | mandatory | Describes the revision level of the running RAID7 Operating System; this is not really an IP address - but the revision is expressed as 4 decimal numbers so th… |
| 1.3.6.1.4.1.1386.2.1.2 | Noderaid7DriveDown | This trap is sent whenever the state for a drive changes from data or parity to any other value. An equivalent poll would be to poll raid7NumberDrives and raid… | ||
| 1.3.6.1.4.1.1386.2.1.2 | Noderaid7Memory | |||
| 1.3.6.1.4.1.1386.2.1.2.1 | Scalarraid7TotalMem | read-only | mandatory | The number of kilobytes of memory present |
| 1.3.6.1.4.1.1386.2.1.2.2 | Scalarraid7GoodMem | read-only | mandatory | The number of kilobytes of memory judged good by self-test |
| 1.3.6.1.4.1.1386.2.1.2.3 | Scalarraid7MemAvail | read-only | mandatory | The number of kilobytes of memory currently in use. |
| 1.3.6.1.4.1.1386.2.1.2.4 | Scalarraid7CacheHitPercent | read-only | mandatory | The system-wide percentage of operations satisfied from the RAID7 system cache. This does not include any operations satisfied from cache in channel adapters, … |
| 1.3.6.1.4.1.1386.2.1.2.5 | Tableraid7BlockTable | not-accessible | mandatory | This table shows how the host transfer block sizes have been distributed - it can be used to tune system performance (see the RAID 7 User Guide). |
| 1.3.6.1.4.1.1386.2.1.2.5.1 | Rowraid7BlockEntry | not-accessible | mandatory | Information specific to blocks of a given size. |
| 1.3.6.1.4.1.1386.2.1.2.5.1.1 | Columnraid7BlockSize | read-only | mandatory | Size of the blocks. |
| 1.3.6.1.4.1.1386.2.1.2.5.1.2 | Columnraid7NumBlocks | read-only | mandatory | Number of blocks of this size. |
| 1.3.6.1.4.1.1386.2.1.3 | Noderaid7EnvironmentFailure | This trap is sent when the value of raid7EnvironmentStatus changes to failure. | ||
| 1.3.6.1.4.1.1386.2.1.3 | Noderaid7Host | |||
| 1.3.6.1.4.1.1386.2.1.3.1 | Scalarraid7NumHostChannels | read-only | mandatory | The number of functional Host I/O Channels. |
| 1.3.6.1.4.1.1386.2.1.3.2 | Tableraid7ChannelTable | not-accessible | mandatory | A table describing each of the Host I/O Channels |
| 1.3.6.1.4.1.1386.2.1.3.2.1 | Rowraid7ChannelEntry | not-accessible | mandatory | Information specific to a given Host I/O Channel |
| 1.3.6.1.4.1.1386.2.1.3.2.1.1 | Columnraid7ChannelNumber | read-only | mandatory | The number of this Host I/O Channel |
| 1.3.6.1.4.1.1386.2.1.3.2.1.2 | Columnraid7ChannelTransferRate | read-only | mandatory | A measure of the data transfer speed on this channel during recent transfers (does not include the idle time on the channel between transfers in the calculatio… |
| 1.3.6.1.4.1.1386.2.1.3.2.1.3 | Columnraid7ChannelTransactionRate | read-only | mandatory | A measure of the number I/O operations per second on this channel. |
| 1.3.6.1.4.1.1386.2.1.3.2.1.4 | Columnraid7ChannelErrorMsgs | read-only | mandatory | The number of error messages on this channel; see the RAID7 console and the User Guide. |
| 1.3.6.1.4.1.1386.2.1.3.2.1.5 | Columnraid7ChannelLastKey | read-only | mandatory | The most recently reported SCSI Key value |
| 1.3.6.1.4.1.1386.2.1.3.2.1.6 | Columnraid7ChannelLastSense | read-only | mandatory | The last SCSI Sense reported. |
| 1.3.6.1.4.1.1386.2.1.4 | Noderaid7Drive | |||
| 1.3.6.1.4.1.1386.2.1.4.1 | Scalarraid7NumDrives | read-only | mandatory | The number of drives installed in the RAID7 system |
| 1.3.6.1.4.1.1386.2.1.4.2 | Scalarraid7NumDataDrives | read-only | mandatory | The number of drives being used as data drives; this may not be equal to the total of the drives in the following objects. |
| 1.3.6.1.4.1.1386.2.1.4.3 | Scalarraid7NumParityDrives | read-only | mandatory | The number of drives being used to store parity information. |
| 1.3.6.1.4.1.1386.2.1.4.4 | Scalarraid7NumStandbyDrives | read-only | mandatory | The number of drives available for reconstructing data from a failed drive. |
| 1.3.6.1.4.1.1386.2.1.4.5 | Scalarraid7NumFailedDrives | read-only | mandatory | The number of drives whos raid7DriveState is either reconstructing or failed. |
| 1.3.6.1.4.1.1386.2.1.4.6 | Tableraid7DriveTable | not-accessible | mandatory | A list of drive entries, one for each physical drive; this may be a sparse table. |
| 1.3.6.1.4.1.1386.2.1.4.6.1 | Rowraid7DriveEntry | not-accessible | mandatory | Information specific to a single drive. |
| 1.3.6.1.4.1.1386.2.1.4.6.1.1 | Columnraid7DriveNumber | read-only | mandatory | Drive number of this drive. |
| 1.3.6.1.4.1.1386.2.1.4.6.1.2 | Columnraid7DriveState | read-only | mandatory | State of this drive. |
| 1.3.6.1.4.1.1386.2.1.4.6.1.3 | Columnraid7DriveActivity | read-only | mandatory | This is letter indicating the most recent operation reported for the drive. See the RAID7 User Guide for values and thier meanings. |
| 1.3.6.1.4.1.1386.2.1.4.6.1.4 | Columnraid7DriveWrites | read-only | mandatory | Number of write operations to this drive. |
| 1.3.6.1.4.1.1386.2.1.4.6.1.5 | Columnraid7DriveReads | read-only | mandatory | Number of read operations to this drive; does not include operations satisfied from RAID7 system or channel cache, but does include those satisfied from any ca… |
| 1.3.6.1.4.1.1386.2.1.4.6.1.6 | Columnraid7DriveTimeOuts | read-only | mandatory | The number of SCSI operations timed out on the drive. |
| 1.3.6.1.4.1.1386.2.1.4.6.1.7 | Columnraid7DriveErrors | read-only | mandatory | Number of errors reported by the drive |
| 1.3.6.1.4.1.1386.2.1.5 | Noderaid7Env | |||
| 1.3.6.1.4.1.1386.2.1.5.1 | Scalarraid7EnvironmentStatus | read-only | mandatory | The 'failure' indicates that one or more power supplies or fans in the unit have failed. |