SCTE-HMS-HE-OPTICAL-SWITCH-MIB
33 objects
Change Log: 1. Added Unsigned32 and Integer32 to IMPORTS 2. Removed TEXTUAL-CONVENTION from IMPORTS 3. Corrected 4 digit date code defined in RFC2578 4. heOpSwitchWaitToRestoreTime is changed to Integer32 instead of INTEGER 5. Removed extra commas in heOpSwitchUnitMandatoryGroup, heOpSwitchUnitGroup and heOpSwitchInputGroup 6. Changed OID of heOpSwitchMIBCompliances to 1 instead of 2 7. Changed the text description of SNMPv2 to SNMP for heOpSwitchBasicCompliance MODULE-COMPLIANCE
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| SCTE-HMS-HE-OPTICS-MIB | heOpticalSwitchGroup |
| SCTE-HMS-HEADENDIDENT-MIB | HeFaultStatus HeHundredthNanoMeter HeOnOffControl HeTenthdB HeTenthdBm |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5591.1.11.1.4.1 | IdentityheOpticalSwitchMIB | Change Log: 1. Added Unsigned32 and Integer32 to IMPORTS 2. Removed TEXTUAL-CONVENTION from IMPORTS 3. Corrected 4 digit date code defined in RFC2578 4. heOpSw… | ||
| 1.3.6.1.4.1.5591.1.11.1.4.1.1 | NodeheOpSwitchMIBObjects | |||
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.1 | TableheOpSwitchUnitTable | not-accessible | current | A table containing information about Optical Switch used in an indoor environment. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.1.1 | RowheOpSwitchUnitEntry | not-accessible | current | List of information about each optical switch. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.1.1.1 | ColumnheOpSwitchMode | read-write | current | This controls and/or reports the switching mode. If automatic(1), the optical switch will evaluate the optical input status and make the decision to affect the… |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.1.1.2 | ColumnheOpSwitchControl | read-write | current | Sets the intended state of the Optical Switch. The effect of this control will depend on the value of heOpSwitchMode. If heOpSwitchMode is set to automatic, th… |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.1.1.3 | ColumnheOpSwitchRevertEnable | read-write | current | This controls the use of revertive switching. If set to on, the switch will attempt to go back to the preferred settings indicated by heOpSwitchControl if heOp… |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.1.1.4 | ColumnheOpSwitchState | read-only | current | Reports the state of the Optical Switch. Not all enumerations must be supported. For example, an A-B optical switch may support only the pathA and pathB enumer… |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.1.1.5 | ColumnheOpSwitchFailoverStatus | read-only | current | The integral status of both inputs. A value is fault(2), if current switch state heOpSwitchState is different than the preferred setting heOpSwitchControl, oth… |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.1.1.6 | ColumnheOpSwitchBothInputStatus | read-only | current | The integral status of both inputs. A value is fault(2), if both input levels are below the nominal value; otherwise, it is normal(1). This object must provide… |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.1.1.7 | ColumnheOpSwitchSelectWavelength | read-write | current | Wavelength feeding the particular input of the optical switch. Typical values might be 131000 (1310 nm) and 155000 (1550 nm). |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.1.1.8 | ColumnheOpSwitchHysteresis | read-write | current | Controls switch input hysteresis amount. The amount of hysteresis used and the ability to change it is to be determined by the vendor. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.1.1.9 | ColumnheOpSwitchWaitToRestoreTime | read-write | current | Controls hysteresis time in sec. If in automatic switching mode and revert mode is enabled, a switch back to the original side will be delayed for the time spe… |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.2 | TableheOpSwitchInputTable | not-accessible | current | A table containing information about each Optical Switch input used in an indoor environment. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.2.1 | RowheOpSwitchInputEntry | not-accessible | current | List of information about each optical switch input. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.2.1.1 | ColumnheOpSwitchInputIndex | not-accessible | current | Index number corresponding to the Optical Input. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.2.1.2 | ColumnheOpSwitchInputOpticalLevel | read-only | current | The measured optical input power for the optical switch. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.2.1.3 | ColumnheOpSwitchSetInputPowerThreshold | read-write | current | Input power switchover point for this input. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.2.1.4 | ColumnheOpSwitchInputStatus | read-only | current | The integral status of the input. A value is fault(2), if the input levels are not in the nominal range; otherwise, it is normal(1). This object must provide f… |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.2.1.5 | ColumnheOpSwitchInputDescription | read-only | current | A description of the switch input. The description text is to be determined by the equipment manufacturer. For example, Input A or Side B. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.3 | TableheOpSwitchOutputTable | not-accessible | current | A table containing information about each Optical Switch output used in an indoor environment. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.3.1 | RowheOpSwitchOutputEntry | not-accessible | current | List of information about each optical switch output. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.3.1.1 | ColumnheOpSwitchOutputIndex | not-accessible | current | Index number corresponding to the Optical Output. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.1.3.1.2 | ColumnheOpSwitchOutputDescription | read-only | current | A description of the switch output. The description text is to be determined by the equipment manufacturer. For example, Output A or Secondary Output. |
| 1.3.6.1.4.1.5591.1.11.1.4.1.2 | NodeheOpSwitchMIBConformance | |||
| 1.3.6.1.4.1.5591.1.11.1.4.1.2.1 | NodeheOpSwitchMIBCompliances | |||
| 1.3.6.1.4.1.5591.1.11.1.4.1.2.1.1 | ComplianceheOpSwitchBasicCompliance | current | The compliance statement for SNMP HMS Headend Optical Switch entities which implement the SNMP heOpticalSwitchMIB. | |
| 1.3.6.1.4.1.5591.1.11.1.4.1.2.2 | NodeheOpSwitchMIBGroups | |||
| 1.3.6.1.4.1.5591.1.11.1.4.1.2.2.1 | GroupheOpSwitchUnitMandatoryGroup | current | The main group defines heOpSwitchUnitTable objects which are mandatory to all indoor optical switch modules. | |
| 1.3.6.1.4.1.5591.1.11.1.4.1.2.2.2 | GroupheOpSwitchInputMandatoryGroup | current | The main group defines heOpSwitchInputTable objects which are mandatory to all indoor optical switch modules. | |
| 1.3.6.1.4.1.5591.1.11.1.4.1.2.2.3 | GroupheOpSwitchOutputMandatoryGroup | current | The main group defines heOpSwitchOutputTable objects which are mandatory to all indoor optical switch modules. | |
| 1.3.6.1.4.1.5591.1.11.1.4.1.2.2.4 | GroupheOpSwitchUnitGroup | current | The collection of heOpSwitchUnitTable objects which are used to represent the indoor optical switch module. | |
| 1.3.6.1.4.1.5591.1.11.1.4.1.2.2.5 | GroupheOpSwitchInputGroup | current | The collection of heOpSwitchInputTable objects which are used to represent the indoor optical switch module. |