SEI-SMI
27 objects
The Enterprise Number for System Engineering International
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1213-MIB | sysName |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20364 | Identitysei | The Enterprise Number for System Engineering International | ||
| 1.3.6.1.4.1.20364.1 | NodejuiceBoxPse | |||
| 1.3.6.1.4.1.20364.1.1 | NodejuiceBoxObjects | |||
| 1.3.6.1.4.1.20364.1.1.1 | TablejuiceBoxPortTable | not-accessible | current | A table of objects that display and control the power characteristics of an individual port on a Juice Box Midspan Power Hub. Values of all read-write objects … |
| 1.3.6.1.4.1.20364.1.1.1.1 | RowjuiceBoxPortEntry | not-accessible | current | A set of objects that display and control the power characteristics of a Juice Box Midspan Power Hub port. |
| 1.3.6.1.4.1.20364.1.1.1.1.1 | ColumnjuiceBoxPortIndex | not-accessible | current | This variable uniquely identifies the port within the Juice Box Midspan Power Hub. |
| 1.3.6.1.4.1.20364.1.1.1.1.2 | ColumnjuiceBoxPortDetectionSetting | read-write | current | Describes the type of PD detection performed by the port. A value of disabled(1) means that no PD detection is performed. If a port currently delivering power … |
| 1.3.6.1.4.1.20364.1.1.1.1.3 | ColumnjuiceBoxPortMaxPower | read-write | current | Describes the maximum power setting for the port in watts. This setting is used by to calculate Allocated Power. It is only used if the port is classified as C… |
| 1.3.6.1.4.1.20364.1.1.1.1.4 | ColumnjuiceBoxPortDescription | read-write | current | A manager will set the value of this variable to indicate the type of powered device that is connected to the port. The default value supplied by the agent if … |
| 1.3.6.1.4.1.20364.1.1.1.1.5 | ColumnjuiceBoxPortStatus | read-only | current | Describes the status of the port. A value of disabled(1) means that juiceBoxPortDetectionSetting for the port is set to disabled. No PD detection will be perfo… |
| 1.3.6.1.4.1.20364.1.1.1.1.6 | ColumnjuiceBoxPortClassifications | read-only | current | Classification is a way to identify a Powered Device according to its power consumption. The meaning of the classification labels is defined in the IEEE specif… |
| 1.3.6.1.4.1.20364.1.1.1.1.7 | ColumnjuiceBoxPortPowerDelivered | read-only | current | Measured usage power of port expressed in milliWatts. This variable is valid only while a PD is being powered, that is, while the attribute juiceBoxPortStatus … |
| 1.3.6.1.4.1.20364.1.1.2 | NodejuiceBoxMainObjects | |||
| 1.3.6.1.4.1.20364.1.1.2.1 | ScalarjuiceBoxMainSystemVoltage | read-only | current | Measured system voltage in millivolts . |
| 1.3.6.1.4.1.20364.1.1.2.2 | ScalarjuiceBoxMainTemperature | read-only | current | Measured internal temperature in degrees C. |
| 1.3.6.1.4.1.20364.1.1.2.3 | ScalarjuiceBoxMainPowerAvailable | read-only | current | The nominal power of the JuiceBox expressed in Watts. |
| 1.3.6.1.4.1.20364.1.1.2.4 | ScalarjuiceBoxMainPowerDelivered | read-only | current | Total Power Delivered to the PDs. |
| 1.3.6.1.4.1.20364.1.1.2.5 | ScalarjuiceBoxMainAllocatedPower | read-only | current | Total Power Allocated to the PDs. This value is calculated base on the Classification of the PDs powered by the Juice Box. If the PD classified as Class 0 or L… |
| 1.3.6.1.4.1.20364.1.1.2.6 | ScalarjuiceBoxMainAllocatedPowerThreshold | read-write | current | The usage threshold expressed in percents for comparing the alocated power and initiating an alarm (trap) if the threshold is exceeded. |
| 1.3.6.1.4.1.20364.1.1.2.7 | ScalarjuiceBoxMainTrapDestinationIPAddr | read-write | current | A read/write IP address. This is the address to which the agent sends traps. The value is initialized as 0.0.0.0. Traps will not be sent until a new value is e… |
| 1.3.6.1.4.1.20364.1.1.2.8 | ScalarjuiceBoxMainTrapReXmitPeriod | read-write | current | The period of time in seconds after which a trap will be re-transmitted if the fault condition is still present |
| 1.3.6.1.4.1.20364.1.1.2.9 | ScalarjuiceBoxMainGlobalPortDetectionSetting | read-write | current | Sets the PortDetectionSetting for all the Juice Box ports to the selected value. Describes the type of PD detection performed by the port. A value of disabled(… |
| 1.3.6.1.4.1.20364.1.1.2.10 | ScalarjuiceBoxMainGlobalPortMaxPower | read-write | current | Used to set PortMaxPower for all ports to the same value. Describes the maximum power setting for the port in watts. This setting is used by to calculate Alloc… |
| 1.3.6.1.4.1.20364.1.1.2.11 | ScalarjuiceBoxMainNetworkControllerFirmware | read-only | current | Firmware Version of the JuiceBox Network Controller. |
| 1.3.6.1.4.1.20364.1.1.2.12 | ScalarjuiceBoxMainSystemControllerFirmware | read-only | current | Firmware Version of the JuiceBox SystemController. |
| 1.3.6.1.4.1.20364.10 | NodejuiceBoxAllocatedPowerThresholdReached | This trap is sent when the Allocated Power is greater than the percentage threshold set juiceBoxMainAllocatedPowerThreshold. | ||
| 1.3.6.1.4.1.20364.20 | NodejuiceBoxPortStatusChange | This trap will be sent anytime the status of a Juice Box port changes. |