SHIVA-LINE-MIB
32 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1213-MIB | DisplayString |
| SHIVA-MIB | -- Concise MIB Definitions line |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1 | TableserialLineTable | not-accessible | mandatory | Table of serial line initialization parameters and status. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1 | RowserialLineEntry | not-accessible | mandatory | initialization parameters and status for a serial line. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.1 | ColumnserialLineIndex | read-only | mandatory | Serial line number, densely numbered starting with 1. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.2 | ColumnserialLineSlot | read-only | mandatory | Physical slot number, starting with 1. Skips empty slots. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.3 | ColumnserialLineChan | read-only | mandatory | Logical channel number on physical slot. BRI cards have two channels, all others have one. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.4 | ColumnserialLineLogIndex | read-only | mandatory | Logical line number, the number used in the device name (ifDesc) SerialN. Skips over empty slots. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.5 | ColumnserialLinePools | read-only | mandatory | The names of the pools that this line is in, comma-seperated. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.6 | ColumnserialLineStatus | read-write | mandatory | Serial line status. Setting serialLineStatus to initializing(2) forces the line to be reinitialized. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.7 | ColumnserialLineModemName | read-write | mandatory | The name of the type of modem connected to this line. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.8 | ColumnserialLineAnswerInit | read-write | mandatory | The initialization string to put the modem in auto-answer mode. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.9 | ColumnserialLineInitRate | read-write | mandatory | The rate in bits per second at which to initialize the line. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.10 | ColumnserialLineInitFlow | read-write | mandatory | The flow control setting to initialize the line with. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.11 | ColumnserialLineSignals | read-only | mandatory | The current status of control signals on this line, as the sum of the following bits; 0 Ready To Send 1 Clear To Send 2 Data Set Ready 3 Data Terminal Ready 4 … |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.12 | ColumnserialLineMode | read-only | mandatory | The tranmission mode currently in use on this line. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.13 | ColumnserialLineInitString | read-write | mandatory | The initialization string to put the modem in dial mode. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.14 | ColumnserialLineConnSpeed | read-only | mandatory | Line connection speed. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.15 | ColumnserialLineSwitch | read-only | mandatory | ISDN switch type configured on this line. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.16 | ColumnserialLineRadap | read-only | mandatory | ISDN rate adaptation type. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.17 | ColumnserialLineTransCap | read-only | mandatory | Type of ISDN service on this line |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.18 | ColumnserialLineSpid | read-only | mandatory | ISDN Service Profile ID. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.19 | ColumnserialLineErrorCorr | read-only | mandatory | error correction protocol on this line. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.20 | ColumnserialLineDataCompr | read-only | mandatory | line data compression type. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.21 | ColumnserialLineEQM | read-only | mandatory | line signal quality. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.22 | ColumnserialLineAGC | read-only | mandatory | line signal strength. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.23 | ColumnserialLineStatTab | read-only | mandatory | Statistics table that pertains to this line. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.24 | ColumnserialLineStatIndex | read-only | mandatory | Index into statistics table. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.25 | ColumnserialLineType | read-only | mandatory | Type of line. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.1.1.26 | ColumnserialLineIfIndex | read-only | mandatory | The ifIndex of this serial line. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.2 | TablelinegroupTable | not-accessible | mandatory | A table of serial line groups. On a LanRover Access Switch this is a table of outgoing PhoneGroup pools. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.2.1 | RowlinegroupEntry | not-accessible | mandatory | A serial line group name table entry. On a LanRover Access Switch an outgoing PhoneGroup pool table entry. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.2.1.1 | ColumnlinegroupName | read-only | mandatory | A serial line group name. On a LanRover Access Switch this is an outgoing PhoneGroup pool name. |
| 1.3.6.1.4.1.21317.1.3.2.3.2.4.2.1.2 | ColumnlinegroupDialoutProts | read-only | mandatory | Bitmask of dialout protocols enabled for group: 0x00000001 - IP 0x00000002 - IPX 0x00000004 - AppleTalk. |